summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/virtio_scsi.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+3
Pull virtio/vhost fixes from Michael Tsirkin: "Bugfixes and documentation fixes. Igor's patch that allows users to tweak memory table size is borderline, but it does fix known crashes, so I merged it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: add max_mem_regions module parameter vhost: extend memory regions allocation to vmalloc 9p/trans_virtio: reset virtio device on remove virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio MAINTAINERS: separate section for s390 virtio drivers virtio: define virtio_pci_cfg_cap in header. virtio: Fix typecast of pointer in vring_init() virtio scsi: fix unused variable warning vhost: use binary search instead of linear in find_region() virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS
2015-07-07virtio scsi: fix unused variable warningStephen Rothwell1-1/+3
drivers/scsi/virtio_scsi.c: In function 'virtscsi_probe': drivers/scsi/virtio_scsi.c:952:11: warning: unused variable 'host_prot' [-Wunused-variable] int err, host_prot; ^ Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-25virtio_scsi: don't select CONFIG_BLK_DEV_INTEGRITYChristoph Hellwig1-1/+10
T10 PI is just another optional feature, LLDDs should work without the infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-01-21virtio/scsi: verify device has config spaceMichael S. Tsirkin1-0/+6
Some devices might not implement config space access (e.g. remoteproc used not to - before 3.9). virtio/scsi needs config space access so make it fail gracefully if not there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-12-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-19/+31
Pull virtio updates from Michael Tsirkin: "virtio: virtio 1.0 support, misc patches This adds a lot of infrastructure for virtio 1.0 support. Notable missing pieces: virtio pci, virtio balloon (needs spec extension), vhost scsi. Plus, there are some minor fixes in a couple of places. Note: some net drivers are affected by these patches. David said he's fine with merging these patches through my tree. Rusty's on vacation, he acked using my tree for these, too" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (70 commits) virtio_ccw: finalize_features error handling virtio_ccw: future-proof finalize_features virtio_pci: rename virtio_pci -> virtio_pci_common virtio_pci: update file descriptions and copyright virtio_pci: split out legacy device support virtio_pci: setup config vector indirectly virtio_pci: setup vqs indirectly virtio_pci: delete vqs indirectly virtio_pci: use priv for vq notification virtio_pci: free up vq->priv virtio_pci: fix coding style for structs virtio_pci: add isr field virtio: drop legacy_only driver flag virtio_balloon: drop legacy_only driver flag virtio_ccw: rev 1 devices set VIRTIO_F_VERSION_1 virtio: allow finalize_features to fail virtio_ccw: legacy: don't negotiate rev 1/features virtio: add API to detect legacy devices virtio_console: fix sparse warnings vhost: remove unnecessary forward declarations in vhost.h ...
2014-12-09virtio: drop VIRTIO_F_VERSION_1 from driversMichael S. Tsirkin1-1/+0
Core activates this bit automatically now, drop it from drivers that set it explicitly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-09virtio_scsi: v1.0 supportMichael S. Tsirkin1-19/+32
Note: for consistency, and to avoid sparse errors, convert all fields, even those no longer in use for virtio v1.0. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-6/+2
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-12/+3
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-20virtio_scsi: support multi hw queue of blk-mqMing Lei1-1/+16
Since virtio_scsi has supported multi virtqueue already, it is natural to map the virtque to hw-queue of blk-mq. Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-3/+1
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-10-15virtio_scsi: drop scan callbackMichael S. Tsirkin1-16/+7
Enable VQs early like we do for restore. This makes it possible to drop the scan callback, moving scanning into the probe function, and making code simpler. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_scsi: fix race on device removalMichael S. Tsirkin1-1/+10
We cancel event work on device removal, but an interrupt could trigger immediately after this, and queue it again. To fix, set a flag. Loosely based on patch by Paolo Bonzini Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virito_scsi: use freezable WQ for eventsPaolo Bonzini1-1/+1
Michael S. Tsirkin noticed a race condition: we reset device on freeze, but system WQ is still running so it might try adding bufs to a VQ meanwhile. To fix, switch to handling events from the freezable WQ. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_scsi: enable VQs early on restoreMichael S. Tsirkin1-0/+2
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after restore returns, virtio scsi violated this rule on restore by kicking event vq within restore. To fix, call virtio_device_ready before using event queue. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-10-15virtio_scsi: move kick event out from virtscsi_initMichael S. Tsirkin1-5/+11
We currently kick event within virtscsi_init, before host is fully initialized. This can in theory confuse guest if device consumes the buffers immediately. To fix, move virtscsi_kick_event_all out to scan/restore. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-07-25virtio-scsi: Implement change_queue_depth for virtscsi targetsVenkatesh Srinivas1-0/+33
change_queue_depth allows changing per-target queue depth via sysfs. It also allows the SCSI midlayer to ramp down the number of concurrent inflight requests in response to a SCSI BUSY status response and allows the midlayer to ramp the count back up to the device maximum when the BUSY condition has resolved. Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25virtio-scsi: replace target spinlock with seqcountMing Lei1-13/+29
The spinlock of tgt_lock is only for serializing read and write req_vq, one lockless seqcount is enough for the purpose. On one 16core VM with vhost-scsi backend, the patch can improve IOPS with 3% on random read test. Signed-off-by: Ming Lei <ming.lei@canonical.com> [Add initialization in virtscsi_target_alloc. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-25virtio-scsi: fix various bad behavior on aborted requestsPaolo Bonzini1-0/+22
Even though the virtio-scsi spec guarantees that all requests related to the TMF will have been completed by the time the TMF itself completes, the request queue's callback might not have run yet. This causes requests to be completed more than once, and as a result triggers a variety of BUGs or oopses. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-25virtio-scsi: avoid cancelling uninitialized work itemsPaolo Bonzini1-1/+3
Calling the workqueue interface on uninitialized work items isn't a good idea even if they're zeroed. It's not failing catastrophically only through happy accidents. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-12Merge branch 'for-next' of ↵Linus Torvalds1-17/+69
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Add support for T10 PI pass-through between vhost-scsi + virtio-scsi (MST + Paolo + MKP + nab) - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch + nab, merged through scsi.git) - Add support for percpu-ida pre-allocation in qla2xxx target code (Quinn + nab) - A number of iser-target fixes related to hardening the network portal shutdown path (Sagi + Slava) - Fix response length residual handling for a number of control CDBs (Roland + Christophe V.) - Various iscsi RFC conformance fixes in the CHAP authentication path (Tejas and Calsoft folks + nab) - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response failures (Vasu + Jun + nab) - Fix long-standing ABORT_TASK + session reset hang (nab) - Convert iser-initiator + iser-target to include T10 bytes into EDTL (Sagi + Or + MKP + Mike Christie) - Fix NULL pointer dereference regression related to XCOPY introduced in v3.15 + CC'ed to v3.12.y (nab)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits) target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd vhost-scsi: Include prot_bytes into expected data transfer length TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire libiscsi, iser: Adjust data_length to include protection information scsi_cmnd: Introduce scsi_transfer_length helper target: Report correct response length for some commands target/sbc: Check that the LBA and number of blocks are correct in VERIFY target/sbc: Remove sbc_check_valid_sectors() Target/iscsi: Fix sendtargets response pdu for iser transport Target/iser: Fix a wrong dereference in case discovery session is over iser iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak target: Use complete_all for se_cmd->t_transport_stop_comp target: Set CMD_T_ACTIVE bit for Task Management Requests target: cleanup some boolean tests target/spc: Simplify INQUIRY EVPD=0x80 tcm_fc: Generate TASK_SET_FULL status for response failures tcm_fc: Generate TASK_SET_FULL status for DataIN failures iscsi-target: Reject mutual authentication with reflected CHAP_C iscsi-target: Remove no-op from iscsit_tpg_del_portal_group iscsi-target: Fix CHAP_A parameter list handling ...
2014-06-11Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-9/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "Main excitement is a virtio_scsi fix for alloc holding spinlock on the abort path, which I refuse to CC stable since (1) I discovered it myself, and (2) it's been there forever with no reports" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock. virtio-rng: fixes for device registration/unregistration virtio-rng: fix boot with virtio-rng device virtio-rng: support multiple virtio-rng devices virtio_ccw: introduce device_lost in virtio_ccw_device virtio: virtio_break_device() to mark all virtqueues broken.
2014-06-02virtio-scsi: Enable DIF/DIX modes in SCSI host LLDNicholas Bellinger1-18/+69
This patch updates virtscsi_probe() to setup necessary Scsi_Host level protection resources. (currently hardcoded to 1) It changes virtscsi_add_cmd() to attach outgoing / incoming protection SGLs preceeding the data payload, and is using the new virtio_scsi_cmd_req_pi->pi_bytes[out,in] field to signal to signal to vhost/scsi bytes to expect for protection data. (Add missing #include <linux/blkdev.h> for blk_integrity - sfr + nab) Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-21virtio_scsi: don't call virtqueue_add_sgs(... GFP_NOIO) holding spinlock.Rusty Russell1-9/+6
This triggers every time we do a SCSI abort: virtscsi_tmf -> virtscsi_kick_cmd (grab lock and call) -> virtscsi_add_cmd -> virtqueue_add_sgs (GFP_NOIO) Logs look like this: sd 0:0:0:0: [sda] abort BUG: sleeping function called from invalid context at mm/slub.c:966 in_atomic(): 1, irqs_disabled(): 1, pid: 6, name: kworker/u2:0 3 locks held by kworker/u2:0/6: #0: ("scsi_tmf_%d"shost->host_no){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0 #1: ((&(&cmd->abort_work)->work)){......}, at: [<c0153180>] process_one_work+0xe0/0x3d0 #2: (&(&virtscsi_vq->vq_lock)->rlock){......}, at: [<c043f508>] virtscsi_kick_cmd+0x18/0x1b0 CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 3.15.0-rc5+ #110 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-rc1-0-gb1d4dc9-20140515_140003-nilsson.home.kraxel.org 04/01/2014 Workqueue: scsi_tmf_0 scmd_eh_abort_handler Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-19virtio_scsi: use cmd_sizeChristoph Hellwig1-18/+7
Taken almost entirely from Nicholas Bellinger's scsi-mq conversion. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-05-19virtio_scsi: remove ACCESS_ONCE() and smp_read_barrier_depends()Ming Lei1-47/+6
Access to tgt->req_vq is strictly serialized by spin_lock of tgt->tgt_lock, so the ACCESS_ONCE() isn't necessary. smp_read_barrier_depends() in virtscsi_req_done was introduced to order reading req_vq and decreasing tgt->reqs, but it isn't needed now because req_vq is read from scsi->req_vqs[vq->index - VIRTIO_SCSI_VQ_BASE] instead of tgt->req_vq, so remove the unnecessary barrier. Also remove related comment about the barrier. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-04-28[SCSI] virtio-scsi: Skip setting affinity on uninitialized vqFam Zheng1-1/+5
virtscsi_init calls virtscsi_remove_vqs on err, even before initializing the vqs. The latter calls virtscsi_set_affinity, so let's check the pointer there before setting affinity on it. This fixes a panic when setting device's num_queues=2 on RHEL 6.5: qemu-system-x86_64 ... \ -device virtio-scsi-pci,id=scsi0,addr=0x13,...,num_queues=2 \ -drive file=/stor/vm/dummy.raw,id=drive-scsi-disk,... \ -device scsi-hd,drive=drive-scsi-disk,... [ 0.354734] scsi0 : Virtio SCSI HBA [ 0.379504] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 0.380141] IP: [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] PGD 0 [ 0.380141] Oops: 0000 [#1] SMP [ 0.380141] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0+ #5 [ 0.380141] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 [ 0.380141] task: ffff88003c9f0000 ti: ffff88003c9f8000 task.ti: ffff88003c9f8000 [ 0.380141] RIP: 0010:[<ffffffff814741ef>] [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP: 0000:ffff88003c9f9c08 EFLAGS: 00010256 [ 0.380141] RAX: 0000000000000000 RBX: ffff88003c3a9d40 RCX: 0000000000001070 [ 0.380141] RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.380141] RBP: ffff88003c9f9c28 R08: 00000000000136c0 R09: ffff88003c801c00 [ 0.380141] R10: ffffffff81475229 R11: 0000000000000008 R12: 0000000000000000 [ 0.380141] R13: ffffffff81cc7ca8 R14: ffff88003cac3d40 R15: ffff88003cac37a0 [ 0.380141] FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 [ 0.380141] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 0.380141] CR2: 0000000000000020 CR3: 0000000001c0e000 CR4: 00000000000006f0 [ 0.380141] Stack: [ 0.380141] ffff88003c3a9d40 0000000000000000 ffff88003cac3d80 ffff88003cac3d40 [ 0.380141] ffff88003c9f9c48 ffffffff814742e8 ffff88003c26d000 ffff88003c26d000 [ 0.380141] ffff88003c9f9c68 ffffffff81474321 ffff88003c26d000 ffff88003c3a9d40 [ 0.380141] Call Trace: [ 0.380141] [<ffffffff814742e8>] virtscsi_set_affinity+0x28/0x40 [ 0.380141] [<ffffffff81474321>] virtscsi_remove_vqs+0x21/0x50 [ 0.380141] [<ffffffff81475231>] virtscsi_init+0x91/0x240 [ 0.380141] [<ffffffff81365290>] ? vp_get+0x50/0x70 [ 0.380141] [<ffffffff81475544>] virtscsi_probe+0xf4/0x280 [ 0.380141] [<ffffffff81363ea5>] virtio_dev_probe+0xe5/0x140 [ 0.380141] [<ffffffff8144c669>] driver_probe_device+0x89/0x230 [ 0.380141] [<ffffffff8144c8ab>] __driver_attach+0x9b/0xa0 [ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230 [ 0.380141] [<ffffffff8144c810>] ? driver_probe_device+0x230/0x230 [ 0.380141] [<ffffffff8144ac1c>] bus_for_each_dev+0x8c/0xb0 [ 0.380141] [<ffffffff8144c499>] driver_attach+0x19/0x20 [ 0.380141] [<ffffffff8144bf28>] bus_add_driver+0x198/0x220 [ 0.380141] [<ffffffff8144ce9f>] driver_register+0x5f/0xf0 [ 0.380141] [<ffffffff81d27c91>] ? spi_transport_init+0x79/0x79 [ 0.380141] [<ffffffff8136403b>] register_virtio_driver+0x1b/0x30 [ 0.380141] [<ffffffff81d27d19>] init+0x88/0xd6 [ 0.380141] [<ffffffff81d27c18>] ? scsi_init_procfs+0x5b/0x5b [ 0.380141] [<ffffffff81ce88a7>] do_one_initcall+0x7f/0x10a [ 0.380141] [<ffffffff81ce8aa7>] kernel_init_freeable+0x14a/0x1de [ 0.380141] [<ffffffff81ce8b3b>] ? kernel_init_freeable+0x1de/0x1de [ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80 [ 0.380141] [<ffffffff817dec29>] kernel_init+0x9/0xf0 [ 0.380141] [<ffffffff817e68fc>] ret_from_fork+0x7c/0xb0 [ 0.380141] [<ffffffff817dec20>] ? rest_init+0x80/0x80 [ 0.380141] RIP [<ffffffff814741ef>] __virtscsi_set_affinity+0x4f/0x120 [ 0.380141] RSP <ffff88003c9f9c08> [ 0.380141] CR2: 0000000000000020 [ 0.380141] ---[ end trace 8074b70c3d5e1d73 ]--- [ 0.475018] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 0.475018] [ 0.475068] Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff) [ 0.475068] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [jejb: checkpatch fixes] Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-01-16virtio-scsi: Fix hotcpu_notifier use-after-free with virtscsi_freezeAsias He1-1/+14
vqs are freed in virtscsi_freeze but the hotcpu_notifier is not unregistered. We will have a use-after-free usage when the notifier callback is called after virtscsi_freeze. Fixes: 285e71ea6f3583a85e27cb2b9a7d8c35d4c0d558 ("virtio-scsi: reset virtqueue affinity when doing cpu hotplug") Cc: stable@vger.kernel.org Signed-off-by: Asias He <asias.hejun@gmail.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-11-11virtio_scsi: verify if queue is broken after virtqueue_get_buf()Heinz Graalfs1-0/+3
If virtqueue_get_buf() returned with a NULL pointer avoid a possibly endless loop by checking for a broken virtqueue. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-10-17virtio: use size-based config accessors.Rusty Russell1-8/+4
This lets the transport do endian conversion if necessary, and insulates the drivers from the difference. Most drivers can use the simple helpers virtio_cread() and virtio_cwrite(). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-09-23virtio: pm: use CONFIG_PM_SLEEP instead of CONFIG_PMAaron Lu1-2/+2
The freeze and restore functions defined in virtio drivers are used for suspend and hibernate, so CONFIG_PM_SLEEP is more appropriate than CONFIG_PM. This patch replace all CONFIG_PM with CONFIG_PM_SLEEP for virtio drivers that implement freeze and restore callbacks. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-08-01virtio-scsi: Fix virtqueue affinity setupAsias He1-1/+1
vscsi->num_queues counts the number of request virtqueue which does not include the control and event virtqueue. It is wrong to subtract VIRTIO_SCSI_VQ_BASE from vscsi->num_queues. This patch fixes the following panic. (qemu) device_del scsi0 BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120 PGD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 659 Comm: kworker/0:1 Not tainted 3.11.0-rc2+ #1172 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: kacpi_hotplug _handle_hotplug_event_func task: ffff88007bee1cc0 ti: ffff88007bfe4000 task.ti: ffff88007bfe4000 RIP: 0010:[<ffffffff8179b29f>] [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120 RSP: 0018:ffff88007bfe5a38 EFLAGS: 00010202 RAX: 0000000000000010 RBX: ffff880077fd0d28 RCX: 0000000000000050 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000000 RBP: ffff88007bfe5a58 R08: ffff880077f6ff00 R09: 0000000000000001 R10: ffffffff8143e673 R11: 0000000000000001 R12: 0000000000000001 R13: ffff880077fd0800 R14: 0000000000000000 R15: ffff88007bf489b0 FS: 0000000000000000(0000) GS:ffff88007ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000079f8b000 CR4: 00000000000006f0 Stack: ffff880077fd0d28 0000000000000000 ffff880077fd0800 0000000000000008 ffff88007bfe5a78 ffffffff8179b37d ffff88007bccc800 ffff88007bccc800 ffff88007bfe5a98 ffffffff8179b3b6 ffff88007bccc800 ffff880077fd0d28 Call Trace: [<ffffffff8179b37d>] virtscsi_set_affinity+0x2d/0x40 [<ffffffff8179b3b6>] virtscsi_remove_vqs+0x26/0x50 [<ffffffff8179c7d2>] virtscsi_remove+0x82/0xa0 [<ffffffff814cb6b2>] virtio_dev_remove+0x22/0x70 [<ffffffff8167ca49>] __device_release_driver+0x69/0xd0 [<ffffffff8167cb9d>] device_release_driver+0x2d/0x40 [<ffffffff8167bb96>] bus_remove_device+0x116/0x150 [<ffffffff81679936>] device_del+0x126/0x1e0 [<ffffffff81679a06>] device_unregister+0x16/0x30 [<ffffffff814cb889>] unregister_virtio_device+0x19/0x30 [<ffffffff814cdad6>] virtio_pci_remove+0x36/0x80 [<ffffffff81464ae7>] pci_device_remove+0x37/0x70 [<ffffffff8167ca49>] __device_release_driver+0x69/0xd0 [<ffffffff8167cb9d>] device_release_driver+0x2d/0x40 [<ffffffff8167bb96>] bus_remove_device+0x116/0x150 [<ffffffff81679936>] device_del+0x126/0x1e0 [<ffffffff8145edfc>] pci_stop_bus_device+0x9c/0xb0 [<ffffffff8145f036>] pci_stop_and_remove_bus_device+0x16/0x30 [<ffffffff81474a9e>] acpiphp_disable_slot+0x8e/0x150 [<ffffffff81474f6a>] hotplug_event_func+0xba/0x1a0 [<ffffffff814906c8>] ? acpi_os_release_object+0xe/0x12 [<ffffffff81475911>] _handle_hotplug_event_func+0x31/0x70 [<ffffffff810b5333>] process_one_work+0x183/0x500 [<ffffffff810b66e2>] worker_thread+0x122/0x400 [<ffffffff810b65c0>] ? manage_workers+0x2d0/0x2d0 [<ffffffff810bc5de>] kthread+0xce/0xe0 [<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70 [<ffffffff81ca045c>] ret_from_fork+0x7c/0xb0 [<ffffffff810bc510>] ? kthread_freezable_should_stop+0x70/0x70 Code: 01 00 00 00 74 59 45 31 e4 83 bb c8 01 00 00 02 74 46 66 2e 0f 1f 84 00 00 00 00 00 49 63 c4 48 c1 e0 04 48 8b bc 0 3 10 02 00 00 <48> 8b 47 20 48 8b 80 d0 01 00 00 48 8b 40 50 48 85 c0 74 07 be RIP [<ffffffff8179b29f>] __virtscsi_set_affinity+0x6f/0x120 RSP <ffff88007bfe5a38> CR2: 0000000000000020 ---[ end trace 99679331a3775f48 ]--- CC: stable@vger.kernel.org Signed-off-by: Asias He <asias@redhat.com> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-08virtio-scsi: reset virtqueue affinity when doing cpu hotplugWanlong Gao1-0/+29
Add hot cpu notifier to reset the request virtqueue affinity when doing cpu hotplug. Cc: linux-scsi@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-08virtio-scsi: introduce multiqueue supportPaolo Bonzini1-28/+254
This patch adds queue steering to virtio-scsi. When a target is sent multiple requests, we always drive them to the same queue so that FIFO processing order is kept. However, if a target was idle, we can choose a queue arbitrarily. In this case the queue is chosen according to the current VCPU, so the driver expects the number of request queues to be equal to the number of VCPUs. This makes it easy and fast to select the queue, and also lets the driver optimize the IRQ affinity for the virtqueues (each virtqueue's affinity is set to the CPU that "owns" the queue). The speedup comes from improving cache locality and giving CPU affinity to the virtqueues, which is why this scheme was selected. Assuming that the thread that is sending requests to the device is I/O-bound, it is likely to be sleeping at the time the ISR is executed, and thus executing the ISR on the same processor that sent the requests is cheap. However, the kernel will not execute the ISR on the "best" processor unless you explicitly set the affinity. This is because in practice you will have many such I/O-bound processes and thus many otherwise idle processors. Then the kernel will execute the ISR on a random processor, rather than the one that is sending requests to the device. The alternative to per-CPU virtqueues is per-target virtqueues. To achieve the same locality, we could dynamically choose the virtqueue's affinity based on the CPU of the last task that sent a request. This is less appealing because we do not set the affinity directly---we only provide a hint to the irqbalanced running in userspace. Dynamically changing the affinity only works if the userspace applies the hint fast enough. Cc: linux-scsi@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Asias He <asias@redhat.com> Tested-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-08virtio-scsi: push vq lock/unlock into virtscsi_vq_donePaolo Bonzini1-13/+9
Avoid duplicated code in all of the callers. Cc: linux-scsi@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-08virtio-scsi: pass struct virtio_scsi to virtqueue completion functionPaolo Bonzini1-8/+9
This will be needed soon in order to retrieve the per-target struct. Cc: linux-scsi@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-04-08virtio-scsi: redo allocation of target dataWanlong Gao1-46/+25
virtio_scsi_target_state is now empty. We will find new uses for it in the next few patches, so this patch does not drop it completely. And as James suggested, we use entries target_alloc and target_destroy in the host template to allocate and destroy the virtio_scsi_target_state of each target, attach this struct to scsi_target->hostdata. Now we can get at it from the sdev with scsi_target(sdev)->hostdata. No messing around with fixed size arrays and bulk memory allocation and no need to pass in the maximum target size as a parameter because everything should now happen dynamically. Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Reviewed-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-20virtio_scsi: use virtqueue_add_inbuf() for virtscsi_kick_event.Rusty Russell1-2/+2
It's a bit clearer, and add_buf is going away. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Asias He <asias@redhat.com>
2013-03-20virtio-scsi: use virtqueue_add_sgs for command buffersWanlong Gao1-63/+37
Using the new virtqueue_add_sgs function lets us simplify the queueing path. In particular, all data protected by the tgt_lock is just gone (multiqueue will find a new use for the lock). Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-12virtio-scsi: use pr_err() instead of printk()Wanlong Gao1-4/+4
Convert the virtio-scsi driver to use pr_err() instead of printk(). Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-01-03Drivers: scsi: remove __dev* attributes.Greg Kroah-Hartman1-3/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-20Merge tag 'virtio-next-for-linus' of ↵Linus Torvalds1-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio update from Rusty Russell: "Some nice cleanups, and even a patch my wife did as a "live" demo for Latinoware 2012. There's a slightly non-trivial merge in virtio-net, as we cleaned up the virtio add_buf interface while DaveM accepted the mq virtio-net patches." * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (27 commits) virtio_console: Add support for remoteproc serial virtio_console: Merge struct buffer_token into struct port_buffer virtio: add drv_to_virtio to make code clearly virtio: use dev_to_virtio wrapper in virtio virtio-mmio: Fix irq parsing in command line parameter virtio_console: Free buffers from out-queue upon close virtio: Convert dev_printk(KERN_<LEVEL> to dev_<level>( virtio_console: Use kmalloc instead of kzalloc virtio_console: Free buffer if splice fails virtio: tools: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: scsi: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: rpmsg: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: net: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: console: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: make virtqueue_add_buf() returning 0 on success, not capacity. virtio: console: don't rely on virtqueue_add_buf() returning capacity. virtio_net: don't rely on virtqueue_add_buf() returning capacity. virtio-net: remove unused skb_vnet_hdr->num_sg field virtio-net: correct capacity math on ring full virtio: move queue_index and num_free fields into core struct virtqueue. ...
2012-12-18virtio: scsi: make it clear that virtqueue_add_buf() no longer returns > 0Rusty Russell1-11/+13
We simplified virtqueue_add_buf(), make it clear in the callers. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-11-27[SCSI] virtio_scsi: fix memory leak on full queue condition.Eric Northup1-0/+2
virtscsi_queuecommand was leaking memory when the virtio queue was full. Tested: Guest operates correctly even with very small queue sizes, validated we're not leaking kmalloc-192 sized allocations anymore. Signed-off-by: Eric Northup <digitaleric@google.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] virtio-scsi: support online resizing of disksPaolo Bonzini1-1/+30
Support the LUN parameter change event. Currently, the host fires this event when the capacity of a disk is changed from the virtual machine monitor. The resize then appears in the kernel log like this: sd 0:0:0:0: [sda] 46137344 512-byte logical blocks: (23.6 GB/22.0 GIb) sda: detected capacity change from 22548578304 to 23622320128 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] virtio-scsi: fix LUNs greater than 255Paolo Bonzini1-1/+5
virtio-scsi needs to report LUNs greater than 256 using the "flat" format. Because the Linux SCSI layer just maps the SCSI LUN to an u32, without any parsing, these end up in the range from 16640 to 32767. Fix max_lun to account for the possibility that logical unit numbers are encoded with the "flat" format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-09[SCSI] virtio-scsi: initialize scatterlist structureRichard W.M. Jones1-1/+1
The sg struct is used without being initialized, which breaks when CONFIG_DEBUG_SG is enabled. Cc: stable@vger.kernel.org Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages ↵Wang Sen1-1/+1
used by sg list When using the commands below to write some data to a virtio-scsi LUN of the QEMU guest(32-bit) with 1G physical memory(qemu -m 1024), the qemu will crash. # sudo mkfs.ext4 /dev/sdb (/dev/sdb is the virtio-scsi LUN.) # sudo mount /dev/sdb /mnt # dd if=/dev/zero of=/mnt/file bs=1M count=1024 In current implementation, sg_set_buf is called to add buffers to sg list which is put into the virtqueue eventually. But if there are some HighMem pages in table->sgl you can not get virtual address by sg_virt. So, sg_virt(sg_elem) may return NULL value. This will cause QEMU exit when virtqueue_map_sg is called in QEMU because an invalid GPA is passed by virtqueue. Two solutions are discussed here: http://lkml.indiana.edu/hypermail/linux/kernel/1207.3/00675.html Finally, value assignment approach was adopted because: Value assignment creates a well-formed scatterlist, because the termination marker in source sg_list has been set in blk_rq_map_sg(). The last entry of the source sg_list is just copied to the the last entry in destination list. Note that, for now, virtio_ring does not care about the form of the scatterlist and simply processes the first out_num + in_num consecutive elements of the sg[] array. I have tested the patch on my workstation. QEMU would not crash any more. Cc: <stable@vger.kernel.org> # 3.4: 4fe74b1: [SCSI] virtio-scsi: SCSI driver Signed-off-by: Wang Sen <senwang@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN ↵Nicholas Bellinger1-3/+12
scanning This patch changes virtio-scsi to use a new virtio_driver->scan() callback so that scsi_scan_host() can be properly invoked once virtio_dev_probe() has set add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK) to signal active virtio-ring operation, instead of from within virtscsi_probe(). This fixes a bug where SCSI LUN scanning for both virtio-scsi-raw and virtio-scsi/tcm_vhost setups was happening before VIRTIO_CONFIG_S_DRIVER_OK had been set, causing VIRTIO_SCSI_S_BAD_TARGET to occur. This fixes a bug with virtio-scsi/tcm_vhost where LUN scan was not detecting LUNs. Tested with virtio-scsi-raw + virtio-scsi/tcm_vhost w/ IBLOCK on 3.5-rc2 code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] virtio-scsi: hotplug support for virtio-scsiCong Meng1-1/+123
This patch implements the hotplug support for virtio-scsi. When there is a device attached/detached, the virtio-scsi driver will be signaled via event virtual queue and it will add/remove the scsi device in question automatically. Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com> Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:43:13 +0000