linux - Linux Kernel (branches are rebased on master from time to time)

Age	Commit message (Collapse)	Author	Files	Lines
2012-07-20	[SCSI] ufs: fix incorrect return value about SUCCESS and FAILED	Namjae Jeon	1	-4/+6
	Currently the UFS host driver has returned incorrect values for SUCCESS and FAILED. Fix it to return the correct value to the upper layer. Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20	[SCSI] ufs: reverse the ufshcd_is_device_present logic	Venkatraman S	1	-3/+3
	Otherwise it counter intuitively returns 0 if device is present. Signed-off-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20	[SCSI] ufs: use module_pci_driver	Venkatraman S	1	-18/+1
	Use macro module_pci_driver and get rid of boilerplate code. No functional changes. Signed-off-by: Venkatraman S <svenkatr@ti.com> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-23	[SCSI] ufs: fix potential NULL pointer dereferencing error in ufshcd_prove.	Namjae Jeon	1	-2/+3
	Avoid dereferencing a NULL pointer if scsi_host_alloc is failed. Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10	[SCSI] ufs: Assign UTRLBAU = upper_32_ bits(UTRLD base address)	Santosh Yaraganavi	1	-3/+3
	UTP Transfer request list base registers UTRLBA and UTRLBAU must be assigned, lower-32 and upper-32 bits of UTRLD list physical base addresses respectively. Currently UTRLBAU is being assigned lower-32 bits of UTRLD physical base address. This will cause an issue with controllers that can support 64-bit addressing. This patch correctly assigns upper-32 bits of UTRLD physical base address to UTRLBAU. Reported-by: Rene De Jong <rene.dejong@arm.com> Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Reviewed-by: Vinayak Holikatti <vinholikatti@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-10	[SCSI] ufs: Fix evaluation of UTP task completion code	Venkatraman S	1	-1/+1
	While interpreting the result of UTP task completion status, by using boolean &&, the evaluation would fail when the UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED was received. Either UPIU_TASK_MANAGEMENT_FUNC_COMPL or UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED should be considered as a success result. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Santosh Y <santoshsy@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27	[SCSI] ufshcd: UFS Host controller driver	Santosh Yaraganavi	5	-0/+2612
	This patch adds support for Universal Flash Storage(UFS) host controllers. The UFS host controller driver includes host controller initialization method. The Initialization process involves following steps: - Initiate UFS Host Controller initialization process by writing to Host controller enable register - Configure UFS Host controller registers with host memory space datastructure offsets. - Unipro link startup procedure - Check for connected device - Configure UFS host controller to process requests - Enable required interrupts - Configure interrupt aggregation [jejb: fix warnings in 32 bit compile] Signed-off-by: Santosh Yaraganavi <santoshsy@gmail.com> Signed-off-by: Vinayak Holikatti <vinholikatti@gmail.com> Reviewed-by: Arnd Bergmann <arnd@linaro.org> Reviewed-by: Vishak G <vishak.g@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>