summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/scsi_scan.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-02scsi: core: Do not truncate INQUIRY data on modern devicesMartin K. Petersen1-1/+11
Low-level device drivers have had the ability to limit the size of an INQUIRY for many years. This made sense for a wide variety of legacy devices. However, we are unnecessarily truncating the INQUIRY response for many modern devices. This prevents us from consulting fields beyond the first 36 bytes. If a device reports that it supports a larger INQUIRY response, and the device also reports that it implements SPC-4 or newer, allow the larger INQUIRY to proceed. Link: https://lore.kernel.org/r/20220302053559.32147-4-martin.petersen@oracle.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-29scsi: core: Fix sbitmap depth in scsi_realloc_sdev_budget_map()John Garry1-0/+5
In commit edb854a3680b ("scsi: core: Reallocate device's budget map on queue depth change"), the sbitmap for the device budget map may be reallocated after the slave device depth is configured. When the sbitmap is reallocated we use the result from scsi_device_max_queue_depth() for the sbitmap size, but don't resize to match the actual device queue depth. Fix by resizing the sbitmap after reallocating the budget sbitmap. We do this instead of init'ing the sbitmap to the device queue depth as the user may want to change the queue depth later via sysfs or other. Link: https://lore.kernel.org/r/1647423870-143867-1-git-send-email-john.garry@huawei.com Fixes: edb854a3680b ("scsi: core: Reallocate device's budget map on queue depth change") Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: core: Reallocate device's budget map on queue depth changeMing Lei1-5/+50
We currently use ->cmd_per_lun as initial queue depth for setting up the budget_map. Martin Wilck reported that it is common for the queue_depth to be subsequently updated in slave_configure() based on detected hardware characteristics. As a result, for some drivers, the static host template settings for cmd_per_lun and can_queue won't actually get used in practice. And if the default values are used to allocate the budget_map, memory may be consumed unnecessarily. Fix the issue by reallocating the budget_map after ->slave_configure() returns. At that time the device queue_depth should accurately reflect what the hardware needs. Link: https://lore.kernel.org/r/20220127153733.409132-1-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Reported-by: Martin Wilck <martin.wilck@suse.com> Suggested-by: Martin Wilck <martin.wilck@suse.com> Tested-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-29scsi: core: Declare 'scsi_scan_type' staticBart Van Assche1-1/+1
'scsi_scan_type' is only used in one source file. Hence declare it static. Link: https://lore.kernel.org/r/20211129194609.3466071-3-bvanassche@acm.org Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-29scsi: core: Suppress a kernel-doc warningBart Van Assche1-1/+1
Suppress the following kernel-doc warning: drivers/scsi/scsi_scan.c:129: warning: Function parameter or member 'dev' not described in 'scsi_enable_async_suspend' Link: https://lore.kernel.org/r/20211129194609.3466071-2-bvanassche@acm.org Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-57/+17
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-22block: remove QUEUE_FLAG_SCSI_PASSTHROUGHChristoph Hellwig1-1/+0
Export scsi_device_from_queue for use with pktcdvd and use that instead of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-16scsi: core: pm: Rely on the device driver core for async power managementBart Van Assche1-0/+17
Instead of implementing asynchronous resume support in the SCSI core, rely on the device driver core for resuming SCSI devices asynchronously. Instead of only supporting asynchronous resumes, also support asynchronous suspends. Link: https://lore.kernel.org/r/20211006215453.3318929-2-bvanassche@acm.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-28scsi: core: Delete scsi_{get,free}_host_dev()John Garry1-57/+0
Since commit 0653c358d2dc ("scsi: Drop gdth driver"), functions scsi_{get,free}_host_dev() no longer have any in-tree users, so delete them. Link: https://lore.kernel.org/r/1631528047-30150-1-git-send-email-john.garry@huawei.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Nacked-by: Hannes Reinecke <hare@suse.de>
2021-08-11Merge branch '5.14/scsi-fixes' into 5.15/scsi-stagingMartin K. Petersen1-1/+2
Resolve mpt3sas conflict between 5.14/scsi-fixes and 5.15/scsi-staging reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-30scsi: block: Remove the remaining SG_IO-related fields from struct request_queueChristoph Hellwig1-0/+2
Move the sg_timeout and sg_reserved_size fields into the bsg_device and scsi_device structures as they have nothing to do with generic block I/O. Note that these values are now separate for bsg vs. SCSI device node access, but that just matches how /dev/sg vs the other nodes has always behaved. Link: https://lore.kernel.org/r/20210729064845.1044147-4-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-29scsi: core: Avoid printing an error if target_alloc() returns -ENXIOSreekanth Reddy1-1/+2
Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty. Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries. Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning. Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-21scsi: core: Add new flag BLIST_IGN_MEDIA_CHANGEMartin Kepplinger1-0/+3
Add a new flag for devices that erroneously establish MEDIUM MAY HAVE CHANGED unit attentions. Drivers can set this flag to make the SCSI layer ignore media change events during resume. [mkp: add "ignore" and add corresponding flag to struct scsi_device] Link: https://lore.kernel.org/r/20210704075403.147114-2-martin.kepplinger@puri.sm Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22scsi: core: Inline scsi_mq_alloc_queue()Bart Van Assche1-4/+8
Since scsi_mq_alloc_queue() only has one caller, inline it. This change was suggested by Christoph Hellwig. Link: https://lore.kernel.org/r/20210622024654.12543-1-bvanassche@acm.org Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Ed Tsai <ed.tsai@mediatek.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31scsi: core: Kill DRIVER_SENSEHannes Reinecke1-1/+1
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> fix
2021-05-31scsi: core: Stop using DRIVER_ERRORHannes Reinecke1-2/+2
Return the actual error code in __scsi_execute() (which, according to the documentation, should have happened anyway). And audit all callers to cope with negative return values from __scsi_execute() and friends. [mkp: resolve conflict and return bool] Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+21
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, target, tcmu, smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx). The major core change is using a sbitmap instead of an atomic for queue tracking" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits) scsi: target: tcm_fc: Fix a kernel-doc header scsi: target: Shorten ALUA error messages scsi: target: Fix two format specifiers scsi: target: Compare explicitly with SAM_STAT_GOOD scsi: sd: Introduce a new local variable in sd_check_events() scsi: dc395x: Open-code status_byte(u8) calls scsi: 53c700: Open-code status_byte(u8) calls scsi: smartpqi: Remove unused functions scsi: qla4xxx: Remove an unused function scsi: myrs: Remove unused functions scsi: myrb: Remove unused functions scsi: mpt3sas: Fix two kernel-doc headers scsi: fcoe: Suppress a compiler warning scsi: libfc: Fix a format specifier scsi: aacraid: Remove an unused function scsi: core: Introduce enum scsi_disposition scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case scsi: core: Rename scsi_softirq_done() into scsi_complete() scsi: core: Remove an incorrect comment scsi: core: Make the scsi_alloc_sgtables() documentation more accurate ...
2021-04-06scsi: remove the unchecked_isa_dma flagChristoph Hellwig1-4/+2
Remove the unchecked_isa_dma now that all users are gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-04scsi: core: Replace sdev->device_busy with sbitmapMing Lei1-2/+21
SCSI currently uses an atomic variable to track queue depth for each attached device. The queue depth depends on many factors such as transport type and device implementation. In addition, the SCSI device queue depth is not a static entity but changes over time as a result of congestion management. While blk-mq currently tracks queue depth for each hctx, it can't easily be changed to accommodate the SCSI per-device requirement. The current approach of using an atomic variable doesn't scale well when there are lots of CPU cores and the disk is very fast. IOPS can be substantially impacted by the atomic in the hot path. Replace the atomic variable sdev->device_busy with an sbitmap for tracking the SCSI device queue depth. It has been observed that IOPS is improved ~30% by this patchset in the following test: 1) test machine(32 logical CPU cores) Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Model name: Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz 2) setup scsi_debug: modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256 3) fio script: fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \ --numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \ --loops=10000 --name=job1 --filename=/dev/sdN [mkp: fix device_busy reference in mpt3sas] Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/ Cc: Omar Sandoval <osandov@fb.com> Cc: Kashyap Desai <kashyap.desai@broadcom.com> Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-26scsi: core: Don't start concurrent async scan on same hostMing Lei1-3/+4
The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: core: Remove cmd_list functionalityHannes Reinecke1-1/+0
Remove cmd_list functionality; no users left. With that the scsi_put_command() becomes empty, so remove that one, too. Link: https://lore.kernel.org/r/20200228075318.91255-14-hare@suse.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart van Assche <bvanassche@acm.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-15scsi: core: map PQ=1, PDT=other values to SCSI_SCAN_TARGET_PRESENTLi Zhong1-3/+4
commit 84961f28e9d1 ("[SCSI] Don't add scsi_device for devices that return PQ=1, PDT=0x1f") returns SCSI_SCAN_TARGET_PRESENT if inquiry returns PQ=1, and PDT = 0x1f. However, from the scsi spec, it seemed setting PQ=1, and PDT to the type it is capable to support, can also mean the device is not connected. E.g. we see an IBM/2145 returns PQ=1 and PDT=0 for a non-mapped lun (details attached at the end). This patch changes the check condition a bit, so the check don't require PTD to be 0x1f when PQ=1. $ echo 0 0 1 > /sys/class/scsi_host/host1/scan [ 2483.722186] scsi 1:0:0:1: scsi scan: INQUIRY pass 1 length 36 [ 2483.725687] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0 [ 2483.729171] scsi 1:0:0:1: scsi scan: INQUIRY pass 2 length 109 [ 2483.732481] scsi 1:0:0:1: scsi scan: INQUIRY successful with code 0x0 [ 2483.735911] scsi 1:0:0:1: Direct-Access IBM 2145 0000 PQ: 1 ANSI: 6 [ 2483.741282] scsi 1:0:0:1: Attached scsi generic sg2 type 0 $ tail /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: IBM Model: 2145 Rev: 0000 Type: Direct-Access ANSI SCSI revision: 06 $ lsscsi [0:0:0:0] disk IBM 2145 0000 /dev/sdb [1:0:0:0] disk IBM 2145 0000 /dev/sda [1:0:0:1] disk IBM 2145 0000 - Signed-off-by: Li Zhong <lizhongfs@gmail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-27scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.cBenjamin Block1-3/+3
We had a test-report where, under memory pressure, adding LUNs to the systems would fail (the tests add LUNs strictly in sequence): [ 5525.853432] scsi 0:0:1:1088045124: Direct-Access IBM 2107900 .148 PQ: 0 ANSI: 5 [ 5525.853826] scsi 0:0:1:1088045124: alua: supports implicit TPGS [ 5525.853830] scsi 0:0:1:1088045124: alua: device naa.6005076303ffd32700000000000044da port group 0 rel port 43 [ 5525.853931] sd 0:0:1:1088045124: Attached scsi generic sg10 type 0 [ 5525.854075] sd 0:0:1:1088045124: [sdk] Disabling DIF Type 1 protection [ 5525.855495] sd 0:0:1:1088045124: [sdk] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 5525.855606] sd 0:0:1:1088045124: [sdk] Write Protect is off [ 5525.855609] sd 0:0:1:1088045124: [sdk] Mode Sense: ed 00 00 08 [ 5525.855795] sd 0:0:1:1088045124: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5525.857838] sdk: sdk1 [ 5525.859468] sd 0:0:1:1088045124: [sdk] Attached SCSI disk [ 5525.865073] sd 0:0:1:1088045124: alua: transition timeout set to 60 seconds [ 5525.865078] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015070] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.015213] sd 0:0:1:1088045124: alua: port group 00 state A preferred supports tolusnA [ 5526.587439] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured [ 5526.588562] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured Looking at the code of scsi_alloc_sdev(), and all the calling contexts, there seems to be no reason to use GFP_ATMOIC here. All the different call-contexts use a mutex at some point, and nothing in between that requires no sleeping, as far as I could see. Additionally, the code that later allocates the block queue for the device (scsi_mq_alloc_queue()) already uses GFP_KERNEL. There are similar allocations in two other functions: scsi_probe_and_add_lun(), and scsi_add_lun(),; that can also be done with GFP_KERNEL. Here is the contexts for the three functions so far: scsi_alloc_sdev() scsi_probe_and_add_lun() scsi_sequential_lun_scan() __scsi_scan_target() scsi_scan_target() mutex_lock() scsi_scan_channel() scsi_scan_host_selected() mutex_lock() scsi_report_lun_scan() __scsi_scan_target() ... __scsi_add_device() mutex_lock() __scsi_scan_target() ... scsi_report_lun_scan() ... scsi_get_host_dev() mutex_lock() scsi_probe_and_add_lun() ... scsi_add_lun() scsi_probe_and_add_lun() ... So replace all these, and give them a bit of a better chance to succeed, with more chances of reclaim. Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07scsi: kill off the legacy IO pathJens Axboe1-9/+1
This removes the legacy (non-mq) IO path for SCSI. Cc: linux-scsi@vger.kernel.org Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-26scsi: core: check for equality of result byte valuesJohannes Thumshirn1-1/+1
When evaluating a SCSI command's result using the field access macros, check for equality of the fields and not if a specific bit is set. This is a preparation patch, for reworking the results field in the SCSI command. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-12-14scsi: core: Use blist_flags_t consistentlyBart Van Assche1-6/+7
Use the type blist_flags_t for all variables that represent blacklist flags. Additionally, suppress recently introduced sparse warnings related to blacklist flags. [mkp: fixed commit id] Fixes: 5ebde4694e3b ("scsi: Use 'blist_flags_t' for scsi_devinfo flags") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-16scsi: Use 'blist_flags_t' for scsi_devinfo flagsHannes Reinecke1-1/+1
As per recommendation from Linus we should be using a distinct type for blacklist flags. [mkp: was cut against an older kernel, applied by hand] Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+1
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-17scsi: scsi: Export blacklist flags to sysfsHannes Reinecke1-0/+1
Each scsi device is scanned according to the found blacklist flags, but this information is never presented to sysfs. This makes it quite hard to figure out if blacklisting worked as expected. With this patch we're exporting an additional attribute 'blacklist' containing the blacklist flags for this device. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-02scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAPMartin K. Petersen1-0/+3
SBC-4 states: "A MAXIMUM UNMAP LBA COUNT field set to a non-zero value indicates the maximum number of LBAs that may be unmapped by an UNMAP command" "A MAXIMUM WRITE SAME LENGTH field set to a non-zero value indicates the maximum number of contiguous logical blocks that the device server allows to be unmapped or written in a single WRITE SAME command." Despite the spec being clear on the topic, some devices incorrectly expect WRITE SAME commands with the UNMAP bit set to be limited to the value reported in MAXIMUM UNMAP LBA COUNT in the Block Limits VPD. Implement a blacklist option that can be used to accommodate devices with this behavior. Cc: <stable@vger.kernel.org> Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Reported-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-25scsi: Document which queue type a function is intended forBart Van Assche1-1/+1
Rename several functions to make it easy to see which queue type a function is intended for. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-32/+14
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc, qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with a host of minor and miscellaneous changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits) qla2xxx: Fix NVMe entry_type for iocb packet on BE system scsi: qla2xxx: avoid unused-function warning scsi: snic: fix a couple of spelling mistakes/typos scsi: qla2xxx: fix a bunch of typos and spelling mistakes scsi: lpfc: don't double count abort errors scsi: lpfc: spin_lock_irq() is not nestable scsi: hisi_sas: optimise DMA slot memory scsi: ibmvfc: constify dev_pm_ops structures. scsi: ibmvscsi: constify dev_pm_ops structures. scsi: cxlflash: Update debug prints in reset handlers scsi: cxlflash: Update send_tmf() parameters scsi: cxlflash: Avoid double free of character device scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails. scsi: ufs: flush eh_work when eh_work scheduled. scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock scsi: sun_esp: fix device reference leaks scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init scsi: fnic: correct speed display and add support for 25,40 and 100G scsi: fnic: added timestamp reporting in fnic debug stats ...
2017-07-01scsi: Add STARGET_CREATED_REMOVE state to scsi_target_stateEwan D. Milne1-2/+3
The addition of the STARGET_REMOVE state had the side effect of introducing a race condition that can cause a crash. scsi_target_reap_ref_release() checks the starget->state to see if it still in STARGET_CREATED, and if so, skips calling transport_remove_device() and device_del(), because the starget->state is only set to STARGET_RUNNING after scsi_target_add() has called device_add() and transport_add_device(). However, if an rport loss occurs while a target is being scanned, it can happen that scsi_remove_target() will be called while the starget is still in the STARGET_CREATED state. In this case, the starget->state will be set to STARGET_REMOVE, and as a result, scsi_target_reap_ref_release() will take the wrong path. The end result is a panic: [ 1255.356653] Oops: 0000 [#1] SMP [ 1255.360154] Modules linked in: x86_pkg_temp_thermal kvm_intel kvm irqbypass crc32c_intel ghash_clmulni_i [ 1255.393234] CPU: 5 PID: 149 Comm: kworker/u96:4 Tainted: G W 4.11.0+ #8 [ 1255.401879] Hardware name: Dell Inc. PowerEdge R320/08VT7V, BIOS 2.0.22 11/19/2013 [ 1255.410327] Workqueue: scsi_wq_6 fc_scsi_scan_rport [scsi_transport_fc] [ 1255.417720] task: ffff88060ca8c8c0 task.stack: ffffc900048a8000 [ 1255.424331] RIP: 0010:kernfs_find_ns+0x13/0xc0 [ 1255.429287] RSP: 0018:ffffc900048abbf0 EFLAGS: 00010246 [ 1255.435123] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 1255.443083] RDX: 0000000000000000 RSI: ffffffff8188d659 RDI: 0000000000000000 [ 1255.451043] RBP: ffffc900048abc10 R08: 0000000000000000 R09: 0000012433fe0025 [ 1255.459005] R10: 0000000025e5a4b5 R11: 0000000025e5a4b5 R12: ffffffff8188d659 [ 1255.466972] R13: 0000000000000000 R14: ffff8805f55e5088 R15: 0000000000000000 [ 1255.474931] FS: 0000000000000000(0000) GS:ffff880616b40000(0000) knlGS:0000000000000000 [ 1255.483959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1255.490370] CR2: 0000000000000068 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 1255.498332] Call Trace: [ 1255.501058] kernfs_find_and_get_ns+0x31/0x60 [ 1255.505916] sysfs_unmerge_group+0x1d/0x60 [ 1255.510498] dpm_sysfs_remove+0x22/0x60 [ 1255.514783] device_del+0xf4/0x2e0 [ 1255.518577] ? device_remove_file+0x19/0x20 [ 1255.523241] attribute_container_class_device_del+0x1a/0x20 [ 1255.529457] transport_remove_classdev+0x4e/0x60 [ 1255.534607] ? transport_add_class_device+0x40/0x40 [ 1255.540046] attribute_container_device_trigger+0xb0/0xc0 [ 1255.546069] transport_remove_device+0x15/0x20 [ 1255.551025] scsi_target_reap_ref_release+0x25/0x40 [ 1255.556467] scsi_target_reap+0x2e/0x40 [ 1255.560744] __scsi_scan_target+0xaa/0x5b0 [ 1255.565312] scsi_scan_target+0xec/0x100 [ 1255.569689] fc_scsi_scan_rport+0xb1/0xc0 [scsi_transport_fc] [ 1255.576099] process_one_work+0x14b/0x390 [ 1255.580569] worker_thread+0x4b/0x390 [ 1255.584651] kthread+0x109/0x140 [ 1255.588251] ? rescuer_thread+0x330/0x330 [ 1255.592730] ? kthread_park+0x60/0x60 [ 1255.596815] ret_from_fork+0x29/0x40 [ 1255.600801] Code: 24 08 48 83 42 40 01 5b 41 5c 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 [ 1255.621876] RIP: kernfs_find_ns+0x13/0xc0 RSP: ffffc900048abbf0 [ 1255.628479] CR2: 0000000000000068 [ 1255.632756] ---[ end trace 34a69ba0477d036f ]--- Fix this by adding another scsi_target state STARGET_CREATED_REMOVE to distinguish this case. Fixes: f05795d3d771 ("scsi: Add intermediate STARGET_REMOVE state to scsi_target_state") Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Cc: <stable@vger.kernel.org> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-26scsi: remove various unused blist flagsChristoph Hellwig1-23/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-06-12scsi: Protect SCSI device state changes with a mutexBart Van Assche1-7/+9
Serializing SCSI device state changes avoids that two state changes can occur concurrently, e.g. the state changes in scsi_target_block() and __scsi_remove_device(). This serialization is essential to make patch "Make __scsi_remove_device go straight from BLOCKED to DEL" work reliably. Enable this mechanism for all scsi_target_*block() callers but not for the scsi_internal_device_unblock() calls from the mpt3sas driver because that driver can call scsi_internal_device_unblock() from atomic context. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-05-16scsi: fix some kernel-doc markupsMauro Carvalho Chehab1-3/+4
Sphinx is very pedantic with regards to ident/spacing. Fix some kernel-doc markups in order to solve those errors/warnings: ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsicam.c:121: WARNING: Inline emphasis start-string without end-string. ./drivers/scsi/scsi_scan.c:1056: ERROR: Unexpected indentation. ./drivers/scsi/scsi_scan.c:1057: WARNING: Block quote ends without a blank line; unexpected unindent. ./drivers/scsi/scsi_transport_fc.c:2918: ERROR: Unexpected indentation. ./drivers/scsi/scsi_transport_fc.c:2921: WARNING: Block quote ends without a blank line; unexpected unindent. ./drivers/scsi/scsi_transport_fc.c:2922: WARNING: Enumerated list ends without a blank line; unexpected unindent. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-11scsi: Remove one useless stack variableMing Lei1-4/+0
The local variable of 'devname' in scsi_report_lun_scan() isn't used any more, so remove it. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-11scsi: Fix use-after-freeMing Lei1-1/+1
This patch fixes one use-after-free report[1] by KASAN. In __scsi_scan_target(), when a type 31 device is probed, SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned again. Inside the following scsi_report_lun_scan(), one new scsi_device instance is allocated, and scsi_probe_and_add_lun() is called again to probe the target and still see type 31 device, finally __scsi_remove_device() is called to remove & free the device at the end of scsi_probe_and_add_lun(), so cause use-after-free in scsi_report_lun_scan(). And the following SCSI log can be observed: scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0) scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0 scsi 0:0:2:0: scsi scan: REPORT LUN scan scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104 This patch fixes the issue by moving the putting reference at the end of scsi_report_lun_scan(). [1] KASAN report ================================================================== [ 3.274597] PM: Adding info for serio:serio1 [ 3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304 [ 3.275653] Read of size 4 by task kworker/u10:0/27 [ 3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121 [ 3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3.276797] Workqueue: events_unbound async_run_entry_fn [ 3.277083] ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80 [ 3.277532] ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930 [ 3.277989] ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165 [ 3.278436] Call Trace: [ 3.278528] [<ffffffff94bbc6c1>] dump_stack+0x65/0x84 [ 3.278797] [<ffffffff9459fec1>] kasan_object_err+0x21/0x70 [ 3.279063] device: 'psaux': device_add [ 3.279616] [<ffffffff945a0165>] kasan_report_error+0x205/0x500 [ 3.279651] PM: Adding info for No Bus:psaux [ 3.280202] [<ffffffff944ecd22>] ? kfree_const+0x22/0x30 [ 3.280486] [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370 [ 3.280805] [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50 [ 3.281170] [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0 [ 3.281506] [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0 [ 3.281848] [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30 [ 3.282156] [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60 [ 3.282570] [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40 [ 3.282880] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.283200] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.283563] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.283882] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.284173] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.284492] [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0 [ 3.284876] [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160 [ 3.285207] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.285526] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.285844] [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0 [ 3.286182] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.286443] [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430 [ 3.286745] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287085] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.287368] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048 [ 3.288064] Allocated: [ 3.288147] PID = 27 [ 3.288218] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.288531] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.288806] [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0 [ 3.289098] [<ffffffff9459c07e>] __kmalloc+0x13e/0x250 [ 3.289378] [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0 [ 3.289701] [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0 [ 3.290034] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.290362] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.290724] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.291055] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.291354] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.291695] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.292022] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.292325] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.292594] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.292886] Freed: [ 3.292945] PID = 27 [ 3.293016] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.293327] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.293600] [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0 [ 3.293916] [<ffffffff9459bac2>] kfree+0xa2/0x1f0 [ 3.294168] [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730 [ 3.294598] [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130 [ 3.294974] [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20 [ 3.295322] [<ffffffff94f566f6>] device_release+0x76/0x1e0 [ 3.295626] [<ffffffff94bc2db7>] kobject_release+0x107/0x370 [ 3.295942] [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0 [ 3.296222] [<ffffffff94f56e17>] put_device+0x17/0x20 [ 3.296497] [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0 [ 3.296801] [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0 [ 3.297132] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.297458] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.297829] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.298156] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.298453] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.298777] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.299105] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.299408] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.299676] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.299967] Memory state around the buggy address: [ 3.300209] ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300608] ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.301408] ^ [ 3.301550] ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3.301987] ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.302396] ================================================================== Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-31scsi: move function declarations to scsi_priv.hBaoyou Xie1-2/+0
We get 2 warnings about global functions without a declaration in the scsi driver when building with W=1: drivers/scsi/scsi_lib.c:467:6: warning: no previous prototype for 'scsi_requeue_run_queue' [-Wmissing-prototypes] drivers/scsi/scsi_lib.c:2609:6: warning: no previous prototype for 'scsi_evt_thread' [-Wmissing-prototypes] In fact, both functions are declared in drivers/scsi/scsi_scan.c but need to move them into scsi_priv.h. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15scsi: Add intermediate STARGET_REMOVE state to scsi_target_stateJohannes Thumshirn1-0/+1
Add intermediate STARGET_REMOVE state to scsi_target_state to avoid running into the BUG_ON() in scsi_target_reap(). The STARGET_REMOVE state is only valid in the path from scsi_remove_target() to scsi_target_destroy() indicating this target is going to be removed. This re-fixes the problem introduced in commits bc3f02a795d3 ("[SCSI] scsi_remove_target: fix softlockup regression on hot remove") and 40998193560d ("scsi: restart list search after unlock in scsi_remove_target") in a more comprehensive way. [mkp: Included James' fix for scsi_target_destroy()] Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 40998193560dab6c3ce8d25f4fa58a23e252ef38 Cc: stable@vger.kernel.org Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi: disable automatic target scanHannes Reinecke1-14/+30
On larger installations it is useful to disable automatic LUN scanning, and only add the required LUNs via udev rules. This can speed up bootup dramatically. This patch introduces a new scan module parameter value 'manual', which works like 'none', but can be overridden by setting the 'rescan' value from scsi_scan_target to 'SCSI_SCAN_MANUAL'. And it updates all relevant callers to set the 'rescan' value to 'SCSI_SCAN_MANUAL' if invoked via the 'scan' option in sysfs. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh: add 'rescan' callbackHannes Reinecke1-1/+7
If a device needs to be rescanned the device_handler might need to be rechecked, too. So add a 'rescan' callback to the device handler and call it upon scsi_rescan_device(). The rescan callback will be invoked from the Unit Attention handling of ASC/ASCQ 3F 03 (INQUIRY DATA HAS CHANGED). Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'Hannes Reinecke1-0/+3
Add a new blacklist flag BLIST_SYNC_ALUA to instruct the alua device handler to use synchronous command submission for ALUA commands. Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23scsi: Export function scsi_scan.c:sanitize_inquiry_stringDon Brace1-5/+7
The hpsa driver uses this function to cleanup inquiry data. Our new pqi driver will also use this function. This function was copied into both drivers. This patch exports sanitize_inquiry_string so the hpsa and the pqi drivers can use this function directly. Suggested-by: Hannes Reinecke <hare@suse.de> Suggested-by: Matthew R. Ochs mrochs@linux.vnet.ibm.com Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Justin Lindley <justin.lindley@pmcs.com> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-01-07Merge branch 'jejb-scsi' into miscJames Bottomley1-3/+6
2015-12-03Merge branch 'mkp-fixes' into fixesJames Bottomley1-3/+6
2015-11-30scsi: rescan VPD attributesHannes Reinecke1-0/+4
The VPD page information might change, so we need to be able to update it. This patch implements a VPD page rescan whenever the 'rescan' sysfs attribute is triggered. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-19scsi: report 'INQUIRY result too short' once per hostVitaly Kuznetsov1-3/+6
Some host adapters (e.g. Hyper-V storvsc) are known for not respecting the SPC-2/3/4 requirement for 'INQUIRY data (see table ...) shall contain at least 36 bytes'. As a result we get tons on 'scsi 0:7:1:1: scsi scan: INQUIRY result too short (5), using 36' messages on console. This can be problematic for slow consoles. Introduce short_inquiry flag in struct Scsi_Host to print the message once per host. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-12Merge tag '4.4-scsi-mkp' into miscJames Bottomley1-3/+3
SCSI queue for 4.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>