summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla4xxx/ql4_isr.c
AgeCommit message (Collapse)AuthorFilesLines
2016-12-07scsi: qla4xxx: switch to pci_alloc_irq_vectorsChristoph Hellwig1-16/+11
And simplify the MSI-X logic in general - just request the two vectors directly instead of going through an indirection table. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke1-11/+11
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-19qla4xxx: Disable INTx interrupt for ISP82XXTej Parkash1-7/+5
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] libiscsi: Reduce locking contention in fast pathShlomo Pongratz1-2/+2
Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla4xxx: Handle IPv6 AEN notificationsNilesh Javali1-0/+30
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla4xxx: Fix processing response queue during probeTej Parkash1-3/+12
Issue: While booting with kdump kernel, driver receive IOCB interrupts for which it is not ready which results in processing them before init_firmware during driver probe Fix: Two steps solution 1. Make driver ready to process the interrupt before interupts handlers is registered. 2. Stop driver processing iocb interrupts if not generated as per firmware protocol i.e R2H bit set Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla4xxx: Return correct error status from func qla4xxx_request_irqs()Vikas Chaudhary1-2/+4
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] qla4xxx: Rename ACB_STATE macros with IP_ADDRSTATE macrosNilesh Javali1-7/+7
Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-19[SCSI] qla4xxx: Added support for Diagnostics MBOX commandVikas Chaudhary1-3/+16
Added support for Diagnostics MBOX command via BSG Vendor HST_VENDOR interface. This command provides various tests for validating hardware functionality. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-12-16[SCSI] qla4xxx: Add support for additional network parameters settingsHarish Zunjarrao1-0/+32
Added support to display and update additional network parameters through iscsiadm. Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Update Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Implementation of ACB configuration during Loopback for ISP8042Nilesh Javali1-6/+28
While loopback diagnostic is in progress, disable the ACB which resets all the active connections to target. Disable ACB would filter out all the DHCP multicast and broadcast packets which otherwise cause the diagnostic test to take longer time to complete or failures in some other cases. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03[SCSI] qla4xxx: Added support for ISP8042Vikas Chaudhary1-14/+15
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] qla4xxx: Added print statements to display AENsVikas Chaudhary1-0/+37
Added print statements for following AENs: 1. MBOX_ASTS_INITIALIZATION_FAILED 2. MBOX_ASTS_SYSTEM_WARNING_EVENT 3. MBOX_ASTS_DCBX_CONF_CHANGE 4. MBOX_ASTS_IPV6_DEFAULT_ROUTER_CHANGED Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-10[SCSI] qla4xxx: Fixed request queue count manipulation on response pathTej Parkash1-2/+0
Issue: Request queue count holds the information about free space in request queue which has to be manipulated based on request in and out pointer. But in driver response path, this count was incremented unconditionally, which could move req_in pointer beyond req_out pointer. This scenario leads fw hang during IO. Solution: Request queue count manipulation has to be done in IO path only, keeping req_in and req_out pointer two IOCB count away Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-10[SCSI] qla4xxx: Fix debug level to avoid floods of same messageVikas Chaudhary1-4/+4
Move "Incorrect function ID" print message in case INTX interrupt from DEBUG2 to DEBUG7. This will avoid floods of this message if DEBUG2 is enabled. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Quiesce driver activities while loopbackNilesh Javali1-1/+35
Quiesce all different activities performed by driver upon the link events while loopback diagnostics is in progress. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to ↵Nilesh Javali1-1/+1
MBOX_ASTS_IDC_REQUEST_NOTIFICATION Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Add spurious interrupt messages under debug level 2Nilesh Javali1-6/+7
The spurious interrupt messages are seen when interrupt lines are shared between different adapters or modules. Example, interrupt lines are shared between qlcnic and qla4xxx and USB modules, then the console is flooded with flurry of spurious interrupt messages which are expected in such scenario. Hence put these messages under debug level 2 for INTx interrupt mode. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] qla4xxx: Fix MBOX intr switching from polling to intr mode for ISP83XXVikas Chaudhary1-7/+10
Issue: Mailbox command timed out after switching from polling mode to interrupt mode. Events:- 1. Mailbox interrupts are disabled 2. FW generates AEN and at same time driver enables Mailbox Interrupt 3. Driver issues new mailbox to Firmware In above case driver will not get AEN interrupts generated by FW in step #2 as FW generated this AEN when interrupts are disabled. During the same time driver enabled the mailbox interrupt, so driver will not poll for interrupt. Driver will never process AENs generated in step #2 and issues new mailbox to FW, but now FW is not able to post mailbox completion as AENs generated before are not processed by driver. Fix: Enable Mailbox / AEN interrupts before initializing FW in case of ISP83XX. This will make sure we process all Mailbox and AENs in interrupt mode. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: IDC implementation for LoopbackNilesh Javali1-0/+37
Handle IDC Request Notify AEN and post IDC Acknowledgement while participating in Loopback IDC. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XXVikas Chaudhary1-3/+10
For ISP82xx mixed interrupt mode is not supported. Hence prevent MSI/MSI-x from falling back to INTx mode. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Added support for ISP83XXVikas Chaudhary1-34/+168
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Replace all !is_qla8022() with is_qla40XX()Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update structure and variable namesVikas Chaudhary1-11/+11
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-24[SCSI] qla4xxx: Update function name from 8xxx to 82xxVikas Chaudhary1-20/+20
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] qla4xxx: Properly handle SCSI underrun while processing status IOCBs.Lalit Chandivade1-43/+59
The current code would incorrectly return a DID_OK for a CHECK CONDITION with Recovered error sense key causing incorrect completion of a command when there is a dropped frame. Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] iscsi_transport: Added error status code for ping comp eventVikas Chaudhary1-2/+2
Defined error codes for ping completion status. This patch take care of Mike Christie's commets Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla4xxx: Added ping supportVikas Chaudhary1-0/+72
Added ping support for network connection diagnostics. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] qla4xxx: added support for host eventVikas Chaudhary1-0/+6
Added support to post kernel host event to application using netlink interface. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] qla4xxx: Perform context resets in case of context failures.Vikas Chaudhary1-11/+19
For 4032, context reset was the same as chip reset, and any firmware issue was recovered by performing a chip reset. For 82xx, the iSCSI firmware runs along with FCoE and the NIC firmware contexts, and an error encountered doesnot essentially mean that a chip reset is necessary. Perform Chip resets only in the following cases: 1. Mailbox system error. 2. Mailbox command timeout. 3. fw_heartbeat_counter counter stops incrementing. For all other cases, only perform a context reset. 1. Command Completion with an invalid srb. 2. Other mailbox failures. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sunder <shyam.sunder@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: Added support for adapter and firmware resetVikas Chaudhary1-0/+2
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-27[SCSI] qla4xxx: support iscsiadm session mgmtManish Rangankar1-14/+67
Add scsi_transport_iscsi hooks in qla4xxx to support iSCSI session management using iscsiadm. This patch is based on discussion here http://groups.google.com/group/open-iscsi/browse_thread/thread/e89fd888baf656a0# Now users can use iscsiadm to do target discovery and do login/logout to individual targets using the qla4xxx iSCSI class interface. This patch leaves some dead code, but to make it easier to review we are leaving and in the next patch we will remove that old code. V2 - NOTE: Added code to avoid waiting for AEN during login/logout in the driver, instead added a kernel to user event to notify iscsid about login status. Because of this iscsid will not get blocked. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-24[SCSI] qla4xxx: Complete the cmd if sense_len is zeroPrasanna Mumbai1-2/+7
Complete the cmd if sense length is zero. For cases where sense data spans across multiple iocb's by FW, we need to hold on to the I/O (ha->status_srb != NULL) till we have processed them all and copied the sense data from internal buffer to scsi_cmd sense buffer. Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-24[SCSI] qla4xxx: update function qla4xxx_isr_decode_mailbox()Prasanna Mumbai1-5/+8
- Added MBOX_ASTS_DUPLICATE_IP AEN handling. - Update MBOX_AEN_REG_COUNT to 8 so that driver will save status of all mbox registers in aen_q Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-03-23[SCSI] qla4xxx: Prevent other port reinitialization during remove_adapterKaren Higgins1-1/+1
remove ha flag AF_HBA_GOING_AWAY and added flag AF_HA_REMOVAL to mark the other ISP-4xxx port to indicate that the driver is being removed, so that the other port will not re-initialize while in the process of removing the ha due to driver unload or hba hotplug. Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] qla4xxx: cleanup DDB relogin logic during initializationKaren Higgins1-27/+2
Driver has capability to add device dynamically and present them to OS, driver no longer need to wait for DDBs to come online during driver initialization. Driver still issues a relogin for DDBs that are not online, but no longer wait for DDB to come online. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-17drivers:scsi Change printk typo initate -> initiateJustin P. Mattock1-1/+1
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-21[SCSI] qla4xxx: Updated the Copyright headerVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: cache new IP address acquired via DHCPPrasanna Mumbai1-1/+2
Prior to firmware state change from ACQUIRING to READY, an 0x8029 AEN is received. Added code to check previous state being ACQUIRING in order to update the ip address in the driver. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Prasanna Mumbai <prasanna.mumbai@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: initialize MSI in correct wayShyam Sundar1-1/+1
IRQF_SHARED flag should not be set when calling request_irq for MSI since this interrupt mechanism cannot be shared like standard INTx Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] qla4xxx: Drop use of IRQF_DISABLEVikas Chaudhary1-2/+2
IRQF_DISABLE flag is deprecated and this flag is a NOOP in kernel. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: dump mailbox registers on System ErrorKaren Higgins1-0/+2
Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: Add support for 8130/8131 AENs.Shyam Sundar1-0/+12
AEN 8130 Corresponds to an event representing the insertion (detection) of a transceiver. It also reports the type of the SFP+. AEN 8131 corresponds to the removal of a transceiver. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-25[SCSI] qla4xxx: correct data type of sense_len in qla4xxx_status_cont_entryVikas Chaudhary1-1/+1
change data type of sense_len from uint8_t to uint16_t Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-08-06[SCSI] qla4xxx: Added AER support for ISP82xxLalit Chandivade1-0/+3
Added support for PCI error handling Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: replace all dev_info, dev_warn, dev_err with ql4_printkVikas Chaudhary1-4/+4
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] qla4xxx: Added support for ISP82XXVikas Chaudhary1-63/+325
Signed-off-by: Vikas Chaudhary <Vikas Chaudhary@qlogic.com> Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02[SCSI] qla4xxx: added support for abort task management commandVikas Chaudhary1-3/+3
* Handles SCSI command aborts. * Serialization srb between error handler and command completion path. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Ravi Anand <ravi.anand@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 14:22:02 +0000