summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_init.c
AgeCommit message (Collapse)AuthorFilesLines
2022-03-15scsi: qla2xxx: Fix stuck session of PRLI rejectQuinn Tran1-7/+0
Remove stale recovery code that prevents normal path recovery. Link: https://lore.kernel.org/r/20220310092604.22950-11-njavali@marvell.com Fixes: 1cbc0efcd9be ("scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Reduce false trigger to loginQuinn Tran1-2/+3
While a session is in the middle of a relogin, a late RSCN can be delivered from switch. RSCN trigger fabric scan where the scan logic can trigger another session login while a login is in progress. Reduce the extra trigger to prevent multiple logins to the same session. Link: https://lore.kernel.org/r/20220310092604.22950-10-njavali@marvell.com Fixes: bee8b84686c4 ("scsi: qla2xxx: Reduce redundant ADISC command for RSCNs") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix hang due to session stuckQuinn Tran1-2/+17
User experienced device lost. The log shows Get port data base command was queued up, failed, and requeued again. Every time it is requeued, it set the FCF_ASYNC_ACTIVE. This prevents any recovery code from occurring because driver thinks a recovery is in progress for this session. In essence, this session is hung. The reason it gets into this place is the session deletion got in front of this call due to link perturbation. Break the requeue cycle and exit. The session deletion code will trigger a session relogin. Link: https://lore.kernel.org/r/20220310092604.22950-8-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-15scsi: qla2xxx: Fix disk failure to rediscoverQuinn Tran1-2/+3
User experienced some of the LUN failed to get rediscovered after long cable pull test. The issue is triggered by a race condition between driver setting session online state vs starting the LUN scan process at the same time. Current code set the online state after notifying the session is available. In this case, trigger to start the LUN scan process happened before driver could set the session in online state. LUN scan ends up with failure due to the session online check was failing. Set the online state before reporting of the availability of the session. Link: https://lore.kernel.org/r/20220310092604.22950-3-njavali@marvell.com Fixes: aecf043443d3 ("scsi: qla2xxx: Fix Remote port registration") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-22scsi: qla2xxx: Use named initializers for q_dev_stateGleb Chesnokov1-26/+2
Make q_dev_state a little more readable and maintainable by using named initializers. Also convert QLA8XXX_DEV_* macros into an enum and remove qla83xx_dev_state_to_string(), which is a duplicate of qdev_state(). Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Check for firmware dump already collectedJoe Carnuccio1-0/+8
While allocating firmware dump, check if dump is already collected and do not re-allocate the buffer. Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com Cc: stable@vger.kernel.org Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Add devids and conditionals for 28xxJoe Carnuccio1-5/+3
This is an update to the original 28xx adapter enablement. Add a bunch of conditionals that are applicable for 28xx. Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX") Cc: stable@vger.kernel.org Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Suppress a kernel complaint in qla_create_qpair()Saurav Kashyap1-1/+1
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix device reconnect in loop topologyArun Easi1-0/+15
A device logout in loop topology initiates a device connection teardown which loses the FW device handle. In loop topo, the device handle is not regrabbed leading to device login failures and eventually to loss of the device. Fix this by taking the main login path that does it. Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix scheduling while atomicQuinn Tran1-6/+1
The driver makes a call into midlayer (fc_remote_port_delete) which can put the thread to sleep. The thread that originates the call is in interrupt context. The combination of the two trigger a crash. Schedule the call in non-interrupt context where it is more safe. kernel: BUG: scheduling while atomic: swapper/7/0/0x00010000 kernel: Call Trace: kernel: <IRQ> kernel: dump_stack+0x66/0x81 kernel: __schedule_bug.cold.90+0x5/0x1d kernel: __schedule+0x7af/0x960 kernel: schedule+0x28/0x80 kernel: schedule_timeout+0x26d/0x3b0 kernel: wait_for_completion+0xb4/0x140 kernel: ? wake_up_q+0x70/0x70 kernel: __wait_rcu_gp+0x12c/0x160 kernel: ? sdev_evt_alloc+0xc0/0x180 [scsi_mod] kernel: synchronize_sched+0x6c/0x80 kernel: ? call_rcu_bh+0x20/0x20 kernel: ? __bpf_trace_rcu_invoke_callback+0x10/0x10 kernel: sdev_evt_alloc+0xfd/0x180 [scsi_mod] kernel: starget_for_each_device+0x85/0xb0 [scsi_mod] kernel: ? scsi_init_io+0x360/0x3d0 [scsi_mod] kernel: scsi_init_io+0x388/0x3d0 [scsi_mod] kernel: device_for_each_child+0x54/0x90 kernel: fc_remote_port_delete+0x70/0xe0 [scsi_transport_fc] kernel: qla2x00_schedule_rport_del+0x62/0xf0 [qla2xxx] kernel: qla2x00_mark_device_lost+0x9c/0xd0 [qla2xxx] kernel: qla24xx_handle_plogi_done_event+0x55f/0x570 [qla2xxx] kernel: qla2x00_async_login_sp_done+0xd2/0x100 [qla2xxx] kernel: qla24xx_logio_entry+0x13a/0x3c0 [qla2xxx] kernel: qla24xx_process_response_queue+0x306/0x400 [qla2xxx] kernel: qla24xx_msix_rsp_q+0x3f/0xb0 [qla2xxx] kernel: __handle_irq_event_percpu+0x40/0x180 kernel: handle_irq_event_percpu+0x30/0x80 kernel: handle_irq_event+0x36/0x60 Link: https://lore.kernel.org/r/20220110050218.3958-7-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix warning message due to adisc being flushedQuinn Tran1-0/+6
Fix warning message due to adisc being flushed. Linux kernel triggered a warning message where a different error code type is not matching up with the expected type. Add additional translation of one error code type to another. WARNING: CPU: 2 PID: 1131623 at drivers/scsi/qla2xxx/qla_init.c:498 qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] CPU: 2 PID: 1131623 Comm: drmgr Not tainted 5.13.0-rc1-autotest #1 .. GPR28: c000000aaa9c8890 c0080000079ab678 c00000140a104800 c00000002bd19000 NIP [c00800000790857c] qla2x00_async_adisc_sp_done+0x294/0x2b0 [qla2xxx] LR [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] Call Trace: [c00000001cdc3620] [c008000007908578] qla2x00_async_adisc_sp_done+0x290/0x2b0 [qla2xxx] (unreliable) [c00000001cdc3710] [c0080000078f3080] __qla2x00_abort_all_cmds+0x1b8/0x580 [qla2xxx] [c00000001cdc3840] [c0080000078f589c] qla2x00_abort_all_cmds+0x34/0xd0 [qla2xxx] [c00000001cdc3880] [c0080000079153d8] qla2x00_abort_isp_cleanup+0x3f0/0x570 [qla2xxx] [c00000001cdc3920] [c0080000078fb7e8] qla2x00_remove_one+0x3d0/0x480 [qla2xxx] [c00000001cdc39b0] [c00000000071c274] pci_device_remove+0x64/0x120 [c00000001cdc39f0] [c0000000007fb818] device_release_driver_internal+0x168/0x2a0 [c00000001cdc3a30] [c00000000070e304] pci_stop_bus_device+0xb4/0x100 [c00000001cdc3a70] [c00000000070e4f0] pci_stop_and_remove_bus_device+0x20/0x40 [c00000001cdc3aa0] [c000000000073940] pci_hp_remove_devices+0x90/0x130 [c00000001cdc3b30] [c0080000070704d0] disable_slot+0x38/0x90 [rpaphp] [ c00000001cdc3b60] [c00000000073eb4c] power_write_file+0xcc/0x180 [c00000001cdc3be0] [c0000000007354bc] pci_slot_attr_store+0x3c/0x60 [c00000001cdc3c00] [c00000000055f820] sysfs_kf_write+0x60/0x80 [c00000001cdc3c20] [c00000000055df10] kernfs_fop_write_iter+0x1a0/0x290 [c00000001cdc3c70] [c000000000447c4c] new_sync_write+0x14c/0x1d0 [c00000001cdc3d10] [c00000000044b134] vfs_write+0x224/0x330 [c00000001cdc3d60] [c00000000044b3f4] ksys_write+0x74/0x130 [c00000001cdc3db0] [c00000000002df70] system_call_exception+0x150/0x2d0 [c00000001cdc3e10] [c00000000000d45c] system_call_common+0xec/0x278 Link: https://lore.kernel.org/r/20220110050218.3958-5-njavali@marvell.com Cc: stable@vger.kernel.org Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Fix stuck session in gpdbQuinn Tran1-3/+3
Fix stuck sessions in get port database. When a thread is in the process of re-establishing a session, a flag is set to prevent multiple threads / triggers from doing the same task. This flag was left on, where any attempt to relogin was locked out. Clear this flag, if the attempt has failed. Link: https://lore.kernel.org/r/20220110050218.3958-4-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Implement ref count for SRBSaurav Kashyap1-21/+49
The timeout handler and the done function are racing. When qla2x00_async_iocb_timeout() starts to run it can be preempted by the normal response path (via the firmware?). qla24xx_async_gpsc_sp_done() releases the SRB unconditionally. When scheduling back to qla2x00_async_iocb_timeout() qla24xx_async_abort_cmd() will access an freed sp->qpair pointer: qla2xxx [0000:83:00.0]-2871:0: Async-gpsc timeout - hdl=63d portid=234500 50:06:0e:80:08:77:b6:21. qla2xxx [0000:83:00.0]-2853:0: Async done-gpsc res 0, WWPN 50:06:0e:80:08:77:b6:21 qla2xxx [0000:83:00.0]-2854:0: Async-gpsc OUT WWPN 20:45:00:27:f8:75:33:00 speeds=2c00 speed=0400. qla2xxx [0000:83:00.0]-28d8:0: qla24xx_handle_gpsc_event 50:06:0e:80:08:77:b6:21 DS 7 LS 6 rc 0 login 1|1 rscn 1|0 lid 5 BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: qla24xx_async_abort_cmd+0x1b/0x1c0 [qla2xxx] Obvious solution to this is to introduce a reference counter. One reference is taken for the normal code path (the 'good' case) and one for the timeout path. As we always race between the normal good case and the timeout/abort handler we need to serialize it. Also we cannot assume any order between the handlers. Since this is slow path we can use proper synchronization via locks. When we are able to cancel a timer (del_timer returns 1) we know there can't be any error handling in progress because the timeout handler hasn't expired yet, thus we can safely decrement the refcounter by one. If we are not able to cancel the timer, we know an abort handler is running. We have to make sure we call sp->done() in the abort handlers before calling kref_put(). Link: https://lore.kernel.org/r/20220110050218.3958-3-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-24scsi: qla2xxx: Refactor asynchronous command initializationDaniel Wagner1-52/+25
Move common open-coded asynchronous command initializing code such as setting up the timer and the done callback into one function. This is a preparation step and allows us later on to change the low level error flow handling at a central place. Link: https://lore.kernel.org/r/20220110050218.3958-2-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16scsi: qla2xxx: Synchronize rport dev_loss_tmo settingHannes Reinecke1-7/+3
Currently, the dev_loss_tmo setting is only ever used for SCSI devices. This patch reshuffles initialisation such that the SCSI remote ports are registered before the NVMe ones, allowing the dev_loss_tmo setting to be synchronized between SCSI and NVMe. Link: https://lore.kernel.org/r/20211214111139.52503-1-dwagner@suse.de Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Fix inconsistent check of db_flagsQuinn Tran1-7/+6
db_flags field is a bit field. Replace value check with bit flag check. Link: https://lore.kernel.org/r/20211026115412.27691-12-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Increase ELS payloadQuinn Tran1-0/+4
Currently, firmware limits ELS payload to FC frame size/2112. This patch adjusts memory buffer size to be able to handle max ELS payload. Link: https://lore.kernel.org/r/20211026115412.27691-11-njavali@marvell.com Fixes: 84318a9f01ce ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Reduce connection thrashQuinn Tran1-2/+22
On ipsec start by remote port, target port may use RSCN to trigger initiator to relogin. If driver is already in the process of a relogin, then ignore the RSCN and allow the current relogin to continue. This reduces thrashing of the connection. Link: https://lore.kernel.org/r/20211026115412.27691-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: edif: Tweak trace messageQuinn Tran1-6/+9
Modify trace messages for additional debugability. Link: https://lore.kernel.org/r/20211026115412.27691-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: Fix gnl list corruptionQuinn Tran1-3/+1
Current code does list element deletion and addition in and out of lock protection. This patch moves deletion behind lock. list_add double add: new=ffff9130b5eb89f8, prev=ffff9130b5eb89f8, next=ffff9130c6a715f0. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 182395 Comm: kworker/1:37 Kdump: loaded Tainted: G W OE --------- - - 4.18.0-193.el8.x86_64 #1 Hardware name: HP ProLiant DL160 Gen8, BIOS J03 02/10/2014 Workqueue: qla2xxx_wq qla2x00_iocb_work_fn [qla2xxx] RIP: 0010:__list_add_valid+0x41/0x50 Code: 85 94 00 00 00 48 39 c7 74 0b 48 39 d7 74 06 b8 01 00 00 00 c3 48 89 f2 4c 89 c1 48 89 fe 48 c7 c7 60 83 ad 97 e8 4d bd ce ff <0f> 0b 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 07 48 8b 57 08 RSP: 0018:ffffaba306f47d68 EFLAGS: 00010046 RAX: 0000000000000058 RBX: ffff9130b5eb8800 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9130b7456a00 RBP: ffff9130c6a70a58 R08: 000000000008d7be R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffff9130c6a715f0 R13: ffff9130b5eb8824 R14: ffff9130b5eb89f8 R15: ffff9130b5eb89f8 FS: 0000000000000000(0000) GS:ffff9130b7440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efcaaef11a0 CR3: 000000005200a002 CR4: 00000000000606e0 Call Trace: qla24xx_async_gnl+0x113/0x3c0 [qla2xxx] ? qla2x00_iocb_work_fn+0x53/0x80 [qla2xxx] ? process_one_work+0x1a7/0x3b0 ? worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 ? kthread+0x112/0x130 Link: https://lore.kernel.org/r/20211026115412.27691-3-njavali@marvell.com Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-26scsi: qla2xxx: Relogin during fabric disturbanceQuinn Tran1-9/+45
For RSCN of type "Area, Domain, or Fabric", which indicate a portion or entire fabric was disturbed, current driver does not set the scan_need flag to indicate a session was affected by the disturbance. This in turn can lead to I/O timeout and delay of relogin. Hence initiate relogin in the event of fabric disturbance. Link: https://lore.kernel.org/r/20211026115412.27691-2-njavali@marvell.com Fixes: 1560bafdff9e ("scsi: qla2xxx: Use complete switch scan for RSCN events") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-12Merge branch '5.15/scsi-fixes' into 5.16/scsi-stagingMartin K. Petersen1-1/+2
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-21scsi: qla2xxx: Restore initiator in dual modeDmitry Bogdanov1-1/+2
In dual mode in case of disabling the target, the whole port goes offline and initiator is turned off too. Fix restoring initiator mode after disabling target in dual mode. Link: https://lore.kernel.org/r/20210915153239.8035-1-d.bogdanov@yadro.com Fixes: 0645cb8350cd ("scsi: qla2xxx: Add mode control for each physical port") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: qla2xxx: Move heartbeat handling from DPC thread to workqueueManish Rangankar1-0/+2
DPC thread gets restricted due to a no-op mailbox, which is a blocking call and has a high execution frequency. To free up the DPC thread we move no-op handling to the workqueue. Also, modified qla_do_heartbeat() to send no-op MBC if we don’t have any active interrupts, but there are still I/Os outstanding with firmware. Link: https://lore.kernel.org/r/20210908164622.19240-9-njavali@marvell.com Fixes: d94d8158e184 ("scsi: qla2xxx: Add heartbeat check") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-14scsi: qla2xxx: edif: Use link event to wake up appQuinn Tran1-8/+7
Authentication application may be running and in the past tried to probe driver (app_start) but was unsuccessful. This could be due to the bsg layer not being ready to service the request. On a successful link up, driver will use the netlink Link Up event to notify the app to retry the app_start call. In another case, app does not poll for new NPIV host. This link up event would notify app of the presence of a new SCSI host. Link: https://lore.kernel.org/r/20210908164622.19240-6-njavali@marvell.com Fixes: 4de067e5df12 ("scsi: qla2xxx: edif: Add N2N support for EDIF") Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix NVMe retryQuinn Tran1-24/+17
For target port that register itself as both FCP + NVMe, initiator driver will try to login one mode at a time. If the last mode did not succeed, then driver will try the other mode. When error is encountered, current code only flip to other mode one time (NVMe->FCP) and remain on the last mode. Driver wrongly assumed target port does not support PRLI NVMe, instead it was not ready to receive PRLI. This patch will alternate back and forth on every PRLI failure until login retry count has depleted or it is succeeded. Link: https://lore.kernel.org/r/20210817051315.2477-10-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix hang on NVMe command timeoutsArun Easi1-3/+3
The abort callback gets called only when it gets posted to firmware. The refcounting is done properly in the callback. On internal errors, the callback is not invoked leading to a hung I/O. Fix this by having separate error code when command gets returned from firmware. Link: https://lore.kernel.org/r/20210817051315.2477-9-njavali@marvell.com Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: Fix NVMe | FCP personality changeQuinn Tran1-2/+3
Currently driver saves the personality type (FCP|NVMe) at the start of first discovery of the remote device. If the remote device personality do change over time, then qla driver needs to present that to user to decide. Link: https://lore.kernel.org/r/20210817051315.2477-8-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Do secure PLOGI when auth app is presentQuinn Tran1-5/+2
For initiator mode, always do secure login when authentication app started. Also remove redundant flags to indicate secure connection. Link: https://lore.kernel.org/r/20210817051315.2477-7-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-23scsi: qla2xxx: edif: Add N2N support for EDIFQuinn Tran1-34/+71
For EDIF + N2N to work, firmware 9.8 or later is required. The driver will pause after PLOGI to allow app to authenticate. Once authentication completes, app will tell driver to do PRLI. Link: https://lore.kernel.org/r/20210817051315.2477-6-njavali@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Suppress unnecessary log messages during loginArun Easi1-1/+1
Suppress logging of retryable errors. These can still be seen if extended logging is enabled. Link: https://lore.kernel.org/r/20210810043720.1137-11-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Fix NPIV create erroneous errorQuinn Tran1-1/+3
When user creates multiple NPIVs, the switch capabilities field is checked before a vport is allowed to be created. This field is being toggled if a switch scan is in progress. This creates erroneous reject of vport create. Link: https://lore.kernel.org/r/20210810043720.1137-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Fix unsafe removal from linked listQuinn Tran1-11/+22
On NPIV delete, the VPort is taken off a linked list in an unsafe manner. The check for VPort refcount should be done behind lock before taking off the element. [ 2733.016907] general protection fault: 0000 [#1] SMP NOPTI [ 2733.016908] qla2xxx [0000:22:00.1]-7088:27: VP[4] deleted. [ 2733.016912] CPU: 22 PID: 23481 Comm: qla2xxx_15_dpc Kdump: loaded Tainted: G OE KX 5.3.18-47-default #1 SLE15-SP3 [ 2733.016914] Hardware name: Dell Inc. PowerEdge R7525/0PYVT1, BIOS 2.1.4 02/17/2021 [ 2733.016929] RIP: 0010:qla2x00_abort_isp+0x90/0x850 [qla2xxx] [ 2733.016933] RSP: 0018:ffffb9cfc91efe98 EFLAGS: 00010087 [ 2733.016935] RAX: 0000000000000292 RBX: dead000000000100 RCX: 0000000000000000 [ 2733.016936] RDX: 0000000000000001 RSI: ffff944bfeb99558 RDI: ffff944bfc4b4488 [ 2733.016937] RBP: ffff944bfc4b2868 R08: 00000000000187a2 R09: 0000000000000001 [ 2733.016937] R10: ffffb9cfc91efcc8 R11: 0000000000000001 R12: ffff944bfc4b4000 [ 2733.016938] R13: ffff944bfc4b4870 R14: ffff944bfc4b4488 R15: ffff944bda895c80 [ 2733.016939] FS: 0000000000000000(0000) GS:ffff944bfeb80000(0000) knlGS:0000000000000000 [ 2733.016940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2733.016940] CR2: 00007fc173e74458 CR3: 0000001ff57de000 CR4: 0000000000350ee0 [ 2733.016941] Call Trace: [ 2733.016951] qla2xxx_pci_error_detected+0x190/0x190 [qla2xxx] [ 2733.016957] qla2x00_do_dpc+0x560/0xa10 [qla2xxx] [ 2733.016962] kthread+0x10d/0x130 [ 2733.016963] kthread_park+0xa0/0xa0 [ 2733.016966] ret_from_fork+0x22/0x40 Link: https://lore.kernel.org/r/20210810043720.1137-9-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qla2xxx: Changes to support FCP2 TargetSaurav Kashyap1-0/+6
Add changes to support FCP2 Target. Link: https://lore.kernel.org/r/20210810043720.1137-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add encryption to I/O pathQuinn Tran1-15/+14
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. After the completion of PLOGI, both sides have authenticated and PRLI completed, encrypted I/Os are allowed to proceed. - Use new firmware API to encrypt traffic on the wire - Add driver parameter to enable|disable EDIF feature # modprobe qla2xxx ql2xsecenable=1 Link: https://lore.kernel.org/r/20210624052606.21613-10-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add doorbell notification for appQuinn Tran1-0/+3
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. During runtime, driver and authentication application need to stay in sync in terms of: Session being down|up, arrival of new authentication message (AUTH ELS) and SADB update completion. These events are queued up as doorbell to the authentication application. Application would read this doorbell on regular basis to stay up to date. Each SCSI host would have a separate doorbell queue. The doorbell interface can daisy chain a list of events for each read. Each event contains an event code + hint to help application steer the next course of action. Link: https://lore.kernel.org/r/20210624052606.21613-9-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add detection of secure deviceQuinn Tran1-22/+119
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. There is no FC switch scan service that can indicate whether a device is secure or non-secure. In order to detect whether the remote port supports encrypted operation, driver must first do a PLOGI with the remote device. On completion of the PLOGI, driver will query firmware to see if the device supports secure login. To do that, driver + firmware must advertise the security bit via PLOGI's service parameter. The remote device shall respond using the same service parameter whether it supports it or not. Link: https://lore.kernel.org/r/20210624052606.21613-8-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add authentication pass + fail bsgsQuinn Tran1-2/+1
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. On completion of the authentication process, the authentication application will notify driver on whether it is successful or not. In case of success, application will use the QL_VND_SC_AUTH_OK BSG call to tell driver to proceed to the PRLI phase. In case of failure, application will use the QL_VND_SC_AUTH_FAIL bsg call to tell driver to tear down the connection and retry. In the case where an existing session is active, the re-key process can fail. The session tear down ensures data is not further compromised. Link: https://lore.kernel.org/r/20210624052606.21613-7-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-27scsi: qla2xxx: edif: Add key updateQuinn Tran1-0/+10
Some FC adapters from Marvell offer the ability to encrypt data in flight (EDIF). This feature requires an application to act as an authenticator. As part of the authentication process, the authentication application will generate a SADB entry (Security Association/SA, key, SPI value, etc). This SADB is then passed to driver to be programmed into hardware. There will be a pair of SADB's (Tx and Rx) for each connection. After some period, the application can choose to change the key. At that time, a new set of SADB pair is given to driver. The old set of SADB will be deleted. Add a new bsg call (QL_VND_SC_SA_UPDATE) to allow application to allow adding or deleting SADB entries. Driver will not keep the key in memory. It will pass it to HW. It is assumed that application will assign a unique SPI value to this SADB (SA + key). Driver + hardware will assign a handle to track this unique SPI/SADB. Link: https://lore.kernel.org/r/20210624052606.21613-6-njavali@marvell.com Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Co-developed-by: Larry Wisneski <Larry.Wisneski@marvell.com> Signed-off-by: Larry Wisneski <Larry.Wisneski@marvell.com> Co-developed-by: Duane Grigsby <duane.grigsby@marvell.com> Signed-off-by: Duane Grigsby <duane.grigsby@marvell.com> Co-developed-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Rick Hicksted Jr <rhicksted@marvell.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22scsi: qla2xxx: Add heartbeat checkQuinn Tran1-1/+5
Use "no-op" mailbox command to check if the adapter firmware is still responsive. Link: https://lore.kernel.org/r/20210619052427.6440-1-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-21scsi: qla2xxx: Remove redundant assignment to rvalJiapeng Chong1-2/+0
Variable rval is set to QLA_SUCCESS but this value is never read as it is overwritten later on. Hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/scsi/qla2xxx/qla_init.c:4359:2: warning: Value stored to 'rval' is never read [clang-analyzer-deadcode.DeadStores]. Link: https://lore.kernel.org/r/1620643206-127930-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-28scsi: qla2xxx: Prevent PRLI in target modeAnastasia Kovaleva1-0/+3
In a case when the initiator in P2P mode by some circumstances does not send PRLI, the target, in a case when the target port's WWPN is less than initiator's, changes the discovery state in DSC_GNL. When gnl completes it sends PRLI to the initiator. Usually the initiator in P2P mode always sends PRLI. We caught this issue on Linux stable v5.4.6 https://www.spinics.net/lists/stable/msg458515.html. Fix this particular corner case in the behaviour of the P2P mod target login state machine. Link: https://lore.kernel.org/r/20210422153414.4022-1-a.kovaleva@yadro.com Fixes: a9ed06d4e640 ("scsi: qla2xxx: Allow PLOGI in target mode") Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix crash in PCIe error handlingQuinn Tran1-14/+26
BUG: unable to handle kernel NULL pointer dereference at (null) IP: qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1715 Comm: kworker/0:2 Tainted: GOE 4.12.14-122.37-default #1 SLE12-SP5 Hardware name: HPE Superdome Flex/Superdome Flex, BIOS Bundle:3.30.100 SFW:IP147.007.004.017.000.2009211957 09/21/2020 Workqueue: events aer_recover_work_func task: ffff9e399c14ca80 task.stack: ffffc1c58e4ac000 RIP: 0010:qla2x00_abort_isp+0x21/0x6b0 [qla2xxx] RSP: 0018:ffffc1c58e4afd50 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9e419cdef480 RCX: 0000000000000000 RDX: ffff9e399c14ca80 RSI: 0000000000000246 RDI: ffff9e419bbc27b8 RBP: ffff9e419bbc27b8 R08: 0000000000000004 R09: 00000000a0440000 R10: 0000000000000000 R11: ffff9e399416d1a0 R12: ffff9e419cdef000 R13: ffff9e3a7cfae800 R14: ffff9e3a7cfae800 R15: 00000000000000c0 FS: 0000000000000000(0000) GS:ffff9e39a0000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000006cd00a005 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: qla2xxx_pci_slot_reset+0x141/0x160 [qla2xxx] report_slot_reset+0x41/0x80 ? merge_result.part.4+0x30/0x30 pci_walk_bus+0x70/0x90 pcie_do_recovery+0x1db/0x2e0 aer_recover_work_func+0xc2/0xf0 process_one_work+0x14c/0x390 Disable board_disable logic where driver resources are freed while OS is in the process of recovering the adapter. Link: https://lore.kernel.org/r/20210329085229.4367-9-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix RISC RESET completion pollingQuinn Tran1-6/+59
After RISC RESET, the poll time for completion is too short. Fix the completion polling time. Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Fix stuck sessionQuinn Tran1-0/+1
Session was stuck due to explicit logout to target timing out. The target was in an unresponsive state. This timeout induced an error to the GNL command from moving forward. Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qla2xxx: Add H:C:T info in the log message for fc portsArun Easi1-4/+5
The host:channel:scsi_target_id information is helpful in matching an FC port with a SCSI device, so add it. For initiator FC ports, a -1 would be displayed for "target" part. Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-22scsi: qla2xxx: Remove redundant NULL checkYang Li1-10/+5
Fix below warnings reported by coccicheck: ./drivers/scsi/qla2xxx/qla_init.c:3371:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7855:5-10: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:7916:2-7: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8113:4-18: WARNING: NULL check before some freeing functions is not needed. ./drivers/scsi/qla2xxx/qla_init.c:8174:2-7: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/1611306174-92627-1-git-send-email-abaci-bugfix@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Yang Li <abaci-bugfix@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Wait for ABTS response on I/O timeouts for NVMeBikash Hazarika1-0/+4
FW needs to wait for an ABTS response before completing the I/O. Link: https://lore.kernel.org/r/20210111093134.1206-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bikash Hazarika <bhazarika@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Move some messages from debug to normal log levelSaurav Kashyap1-5/+5
This change will aid in debugging issues arising because of dropped frame, DIF errors, queue full etc where debug level is not set. Link: https://lore.kernel.org/r/20210111093134.1206-4-njavali@marvell.com Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-13scsi: qla2xxx: Implementation to get and manage host, target stats and ↵Saurav Kashyap1-0/+216
initiator port This statistics will help in debugging process and checking specific error counts. It also provides a capability to isolate the port or bring it out of isolation. Link: https://lore.kernel.org/r/20210111093134.1206-2-njavali@marvell.com Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 22:53:23 +0000