summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qedi
AgeCommit message (Collapse)AuthorFilesLines
2019-06-22Merge tag 'scsi-fixes' of ↵Linus Torvalds2-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three driver fixes (and one version number update): a suspend hang in ufs, a qla hard lock on module removal and a qedi panic during discovery" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Fix hardlockup in abort command during driver remove scsi: ufs: Avoid runtime suspend possibly being blocked forever scsi: qedi: update driver version to 8.37.0.20 scsi: qedi: Check targetname while finding boot target information
2019-06-18scsi: qedi: update driver version to 8.37.0.20Nilesh Javali1-3/+3
Update qedi driver version to 8.37.0.20 Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: qedi: Check targetname while finding boot target informationNilesh Javali1-0/+3
The kernel panic was observed during iSCSI discovery via offload with below call trace, [ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.646927] PGD 0 [ 2115.646932] Oops: 0000 [#1] SMP [ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 [ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed] [ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000 [ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>] [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.647141] RSP: 0018:ffff8d66afb83c68 EFLAGS: 00010206 [ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a [ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040 [ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff [ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0 [ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8 [ 2115.647149] FS: 0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000 [ 2115.647151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0 [ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2115.647155] PKRU: 00000000 [ 2115.647157] Call Trace: [ 2115.647165] [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi] [ 2115.647184] [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed] [ 2115.647195] [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [ 2115.647206] [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed] [ 2115.647215] [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660 [ 2115.647221] [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580 [ 2115.647230] [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed] [ 2115.647278] RIP [<ffffffffacf7f0cc>] strncmp+0xc/0x60 Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets. Signed-off-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440Thomas Gleixner16-64/+16
Based on 1 normalized pattern(s): this software is available under the terms of the gnu general public license gpl version 2 available from the file copying in the main directory of this source tree extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.411886531@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds2-28/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the same set of patches sent in the merge window as the final pull except that Martin's read only rework is replaced with a simple revert of the original change that caused the regression. Everything else is an obvious fix or small cleanup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Revert "scsi: sd: Keep disk read-only when re-reading partition" scsi: bnx2fc: fix incorrect cast to u64 on shift operation scsi: smartpqi: Reporting unhandled SCSI errors scsi: myrs: Fix uninitialized variable scsi: lpfc: Update lpfc version to 12.2.0.2 scsi: lpfc: add check for loss of ndlp when sending RRQ scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show scsi: lpfc: resolve lockdep warnings scsi: qedi: remove set but not used variables 'cdev' and 'udev' scsi: qedi: remove memset/memcpy to nfunc and use func instead scsi: qla2xxx: Add cleanup for PCI EEH recovery
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-13scsi: qedi: remove set but not used variables 'cdev' and 'udev'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect': drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable] drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable] These have never been used since introduction. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-13scsi: qedi: remove memset/memcpy to nfunc and use func insteadYueHaibing1-24/+8
KASAN reports this: BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi] Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429 CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x1c4/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 memcpy+0x1f/0x50 mm/kasan/common.c:130 qedi_dbg_err+0xda/0x330 [qedi] ? 0xffffffffc12d0000 qedi_init+0x118/0x1000 [qedi] ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 ? 0xffffffffc12d0000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003 RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 The buggy address belongs to the variable: __func__.67584+0x0/0xffffffffffffd520 [qedi] Memory state around the buggy address: ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa > ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa ^ ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa Currently the qedi_dbg_* family of functions can overrun the end of the source string if it is less than the destination buffer length because of the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc and just use func instead as it is always a null terminated string. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-05-08Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-8/+8
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits) scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory scsi: qla2xxx: Fix hardirq-unsafe locking scsi: qla2xxx: Complain loudly about reference count underflow scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures scsi: qla2xxx: Check the size of firmware data structures at compile time scsi: qla2xxx: Pass little-endian values to the firmware scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() scsi: qla2xxx: Make qla24xx_async_abort_cmd() static scsi: qla2xxx: Remove unnecessary locking from the target code scsi: qla2xxx: Remove qla_tgt_cmd.released scsi: qla2xxx: Complain if a command is released that is owned by the firmware scsi: qla2xxx: target: Fix offline port handling and host reset handling scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() scsi: qla2xxx: Simplify qlt_send_term_imm_notif() scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() scsi: qla2xxx: Fix a qla24xx_enable_msix() error path ...
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-04-29scsi: qedi: Adjust termination and offload ramrod timersManish Rangankar1-2/+3
Whenever offload ramrod is issued, firmware wants driver to wait for max 5 secs, otherwise driver can initiate further corrective action. Similarly, when termination ramrod is issued, irrespective of abortive or non-abortive termination, driver should wait for 60 sec * max TCP-RT timeout. [mkp: typos] Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qedi: Abort ep termination if offload not scheduledManish Rangankar1-0/+3
Sometimes during connection recovery when there is a failure to resolve ARP, and offload connection was not issued, driver tries to flush pending offload connection work which was not queued up. kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0 kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11 kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018 kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0 kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1 f 84 00 00 00 00 00 0f 1f kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000 kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0 kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0 kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000 kernel: FS: 00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0 kernel: Call Trace: kernel: ? try_to_del_timer_sync+0x4d/0x80 kernel: qedi_ep_disconnect+0x3b/0x410 [qedi] kernel: ? 0xffffffffc083c000 kernel: ? klist_iter_exit+0x14/0x20 kernel: ? class_find_device+0x93/0xf0 kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi] kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi] kernel: ? copyout+0x22/0x30 kernel: ? _copy_to_iter+0xa0/0x430 kernel: ? _cond_resched+0x15/0x30 kernel: ? __kmalloc_node_track_caller+0x1f9/0x270 kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi] kernel: netlink_unicast+0x17f/0x230 kernel: netlink_sendmsg+0x2d2/0x3d0 kernel: sock_sendmsg+0x36/0x50 kernel: ___sys_sendmsg+0x280/0x2a0 kernel: ? timerqueue_add+0x54/0x80 kernel: ? enqueue_hrtimer+0x38/0x90 kernel: ? hrtimer_start_range_ns+0x19f/0x2c0 kernel: __sys_sendmsg+0x58/0xa0 kernel: do_syscall_64+0x5b/0x180 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-18scsi: qedi: fix spelling mistake "oflload" -> "offload"Colin Ian King1-2/+2
There are a couple of spelling mistakes in some kernel alert messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12Merge branch '5.1/scsi-fixes' into 5.2/mergeMartin K. Petersen1-5/+2
We have a few submissions for 5.2 that depend on fixes merged post 5.1-rc1. Merge the fixes branch into queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-1/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-29scsi: qedi: remove declaration of nvm_image from stackColin Ian King1-5/+2
The nvm_image is a large struct qedi_nvm_iscsi_image object of over 24K so don't declare it on the stack just for a sizeof requirement; use sizeof on struct qedi_nvm_iscsi_image instead. Fixes: c77a2fa3ff8f ("scsi: qedi: Add the CRC size within iSCSI NVM image") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-19scsi: qedi: Remove set but not used variable 'cls_sess'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/qedi/qedi_fw.c: In function 'qedi_tmf_resp_work': drivers/scsi/qedi/qedi_fw.c:158:28: warning: variable 'cls_sess' set but not used [-Wunused-but-set-variable] drivers/scsi/qedi/qedi_fw.c: In function 'qedi_tmf_work': drivers/scsi/qedi/qedi_fw.c:1370:28: warning: variable 'cls_sess' set but not used [-Wunused-but-set-variable] It's never used since introduction. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-03-09Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-22/+2
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc, hisi_sas, target/iscsi and target/core. Additionally Christoph refactored gdth as part of the dma changes. The major mid-layer change this time is the removal of bidi commands and with them the whole of the osd/exofs driver and filesystem. This is a major simplification for block and mq in particular" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits) scsi: cxgb4i: validate tcp sequence number only if chip version <= T5 scsi: cxgb4i: get pf number from lldi->pf scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c scsi: mpt3sas: Add missing breaks in switch statements scsi: aacraid: Fix missing break in switch statement scsi: kill command serial number scsi: csiostor: drop serial_number usage scsi: mvumi: use request tag instead of serial_number scsi: dpt_i2o: remove serial number usage scsi: st: osst: Remove negative constant left-shifts scsi: ufs-bsg: Allow reading descriptors scsi: ufs: Allow reading descriptor via raw upiu scsi: ufs-bsg: Change the calling convention for write descriptor scsi: ufs: Remove unused device quirks Revert "scsi: ufs: disable vccq if it's not needed by UFS device" scsi: megaraid_sas: Remove a bunch of set but not used variables scsi: clean obsolete return values of eh_timed_out scsi: sd: Optimal I/O size should be a multiple of physical block size scsi: MAINTAINERS: SCSI initiator and target tweaks scsi: fcoe: make use of fip_mode enum complete ...
2019-02-05scsi: stop setting up request->specialChristoph Hellwig1-7/+0
No more need in a blk-mq world where the scsi command and request are allocated together. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: qedf: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-15/+2
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: QLogic-Storage-Upstream@cavium.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-20Merge tag 'scsi-fixes' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of 17 fixes. Most of these are minor or trivial. The one fix that may be serious is the isci one: the bug can cause hba parameters to be set from uninitialized memory. I don't think it's exploitable, but you never know" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxgb4i: add wait_for_completion() scsi: qla1280: set 64bit coherent mask scsi: ufs: Fix geometry descriptor size scsi: megaraid_sas: Retry reads of outbound_intr_status reg scsi: qedi: Add ep_state for login completion on un-reachable targets scsi: ufs: Fix system suspend status scsi: qla2xxx: Use correct number of vectors for online CPUs scsi: hisi_sas: Set protection parameters prior to adding SCSI host scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes scsi: isci: initialize shost fully before calling scsi_add_host() scsi: lpfc: lpfc_sli: Mark expected switch fall-throughs scsi: smartpqi_init: fix boolean expression in pqi_device_remove_start scsi: core: Synchronize request queue PM status only on successful resume scsi: pm80xx: reduce indentation scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param scsi: megaraid_sas: correct an info message scsi: target/iscsi: fix error msg typo when create lio_qr_cache failed scsi: sd: Fix cache_type_store()
2019-01-11scsi: qedi: Add ep_state for login completion on un-reachable targetsManish Rangankar2-0/+4
When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-20/+19
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds4-31/+68
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: smarpqi, lpfc, qedi, megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have a pile of annotation, unused variable and minor updates. The big API change is the updates for Christoph's DMA rework which include removing the DISABLE_CLUSTERING flag. And finally there are a couple of target tree updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits) scsi: isci: request: mark expected switch fall-through scsi: isci: remote_node_context: mark expected switch fall-throughs scsi: isci: remote_device: Mark expected switch fall-throughs scsi: isci: phy: Mark expected switch fall-through scsi: iscsi: Capture iscsi debug messages using tracepoints scsi: myrb: Mark expected switch fall-throughs scsi: megaraid: fix out-of-bound array accesses scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through scsi: fcoe: remove set but not used variable 'port' scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() scsi: smartpqi: fix build warnings scsi: smartpqi: update driver version scsi: smartpqi: add ofa support scsi: smartpqi: increase fw status register read timeout scsi: smartpqi: bump driver version scsi: smartpqi: add smp_utils support scsi: smartpqi: correct lun reset issues scsi: smartpqi: correct volume status scsi: smartpqi: do not offline disks for transient did no connect conditions scsi: smartpqi: allow for larger raid maps ...
2018-12-18scsi: flip the default on use_clusteringChristoph Hellwig1-1/+0
Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Update driver version to 8.33.0.21Nilesh Javali1-2/+2
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Move LL2 producer index processing in BH.Manish Rangankar1-12/+19
1. Removed logic to update HW producer index in interrupt context. 2. Update HW producer index after UIO ring and buffer gets initialized. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: add module param to set ping packet sizeNilesh Javali2-5/+9
Default packet size is 0x400. For jumbo packets set to 0x2400. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Add packet filter in light L2 Rx path.Manish Rangankar1-0/+24
Add packet filter to avoid unnecessary packet processing in iscsiuio. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Check for session online before getting iSCSI TLV data.Manish Rangankar1-0/+3
The kernel panic was observed after switch side perturbation, BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8132b5a0>] strcmp+0x20/0x40 PGD 0 Oops: 0000 [#1] SMP CPU: 8 PID: 647 Comm: kworker/8:1 Tainted: G W OE ------------ 3.10.0-693.el7.x86_64 #1 Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/20/2018 Workqueue: slowpath-13:00. qed_slowpath_task [qed] task: ffff880429eb8fd0 ti: ffff880429190000 task.ti: ffff880429190000 RIP: 0010:[<ffffffff8132b5a0>] [<ffffffff8132b5a0>] strcmp+0x20/0x40 RSP: 0018:ffff880429193c68 EFLAGS: 00010202 RAX: 000000000000000a RBX: 0000000000000002 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff88042bda7a41 RBP: ffff880429193c68 R08: 000000000000ffff R09: 000000000000ffff R10: 0000000000000007 R11: ffff88042b3af338 R12: ffff880420b007a0 R13: ffff88081aa56af8 R14: 0000000000000001 R15: ffff88081aa50410 FS: 0000000000000000(0000) GS:ffff88042fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000019f2000 CR4: 00000000003407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffff880429193d20 ffffffffc02a0c90 ffffc90004b32000 ffff8803fd3ec600 ffff88042bda7800 ffff88042bda7a00 ffff88042bda7840 ffff88042bda7a40 0000000129193d10 2e3836312e323931 ff000a342e363232 ffffffffc01ad99d Call Trace: [<ffffffffc02a0c90>] qedi_get_protocol_tlv_data+0x270/0x470 [qedi] [<ffffffffc01ad99d>] ? qed_mfw_process_tlv_req+0x24d/0xbf0 [qed] [<ffffffffc01653ae>] qed_mfw_fill_tlv_data+0x5e/0xd0 [qed] [<ffffffffc01ad9b9>] qed_mfw_process_tlv_req+0x269/0xbf0 [qed] Fix kernel NULL pointer deref by checking for session is online before getting iSCSI TLV data. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Allocate IRQs based on msix_cntNilesh Javali1-1/+1
The driver load on some systems failed with error, [0004:01:00.5]:[qedi_request_msix_irq:2524]:8: request_irq failed. Allocate the IRQs based on MSIX count obtained from qed module instead of number of queues. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Replace PAGE_SIZE with QEDI_PAGE_SIZENilesh Javali1-7/+9
Use QEDI_PAGE_SIZE for enablement of module on systems with 64K page size. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Fix spelling mistake "OUSTANDING" -> "OUTSTANDING"Nilesh Javali2-3/+3
Fix trivial spelling mistake within macro definition. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-28scsi: qedi: Cleanup redundant QEDI_PAGE_SIZE macro definitionNilesh Javali1-2/+0
Remove redundant macro definition. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-07scsi: kill off the legacy IO pathJens Axboe1-2/+1
This removes the legacy (non-mq) IO path for SCSI. Cc: linux-scsi@vger.kernel.org Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-10-25Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-4/+4
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380, qla2xxx, lpfc, libsas, hisi_sas. In addition there's a set of mostly small updates to the target subsystem a set of conversions to the generic DMA API, which do have some potential for issues in the older drivers but we'll handle those as case by case fixes. A new myrs driver for the DAC960/mylex raid controllers to replace the block based DAC960 which is also being removed by Jens in this merge window. Plus the usual slew of trivial changes" [ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even wonder. There's also a "myrb" driver, where the 'b' stands for 'block'. Truly, somebody has got mad naming skillz. - Linus ] * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits) scsi: myrs: Fix the processor absent message in processor_show() scsi: myrs: Fix a logical vs bitwise bug scsi: hisi_sas: Fix NULL pointer dereference scsi: myrs: fix build failure on 32 bit scsi: fnic: replace gross legacy tag hack with blk-mq hack scsi: mesh: switch to generic DMA API scsi: ips: switch to generic DMA API scsi: smartpqi: fully convert to the generic DMA API scsi: vmw_pscsi: switch to generic DMA API scsi: snic: switch to generic DMA API scsi: qla4xxx: fully convert to the generic DMA API scsi: qla2xxx: fully convert to the generic DMA API scsi: qla1280: switch to generic DMA API scsi: qedi: fully convert to the generic DMA API scsi: qedf: fully convert to the generic DMA API scsi: pm8001: switch to generic DMA API scsi: nsp32: switch to generic DMA API scsi: mvsas: fully convert to the generic DMA API scsi: mvumi: switch to generic DMA API scsi: mpt3sas: switch to generic DMA API ...
2018-10-17scsi: qedi: fully convert to the generic DMA APIChristoph Hellwig1-4/+4
The driver is currently using an odd mix of legacy PCI DMA API and generic DMA API calls, switch it over to the generic API entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-09-28scsi: qedi: Initialize the stats mutex lockNilesh Javali1-0/+1
Fix kernel NULL pointer dereference, Call Trace: [<ffffffff9b7658e6>] __mutex_lock_slowpath+0xa6/0x1d0 [<ffffffff9b764cef>] mutex_lock+0x1f/0x2f [<ffffffffc061b5e1>] qedi_get_protocol_tlv_data+0x61/0x450 [qedi] [<ffffffff9b1f9d8e>] ? map_vm_area+0x2e/0x40 [<ffffffff9b1fc370>] ? __vmalloc_node_range+0x170/0x280 [<ffffffffc0b81c3d>] ? qed_mfw_process_tlv_req+0x27d/0xbd0 [qed] [<ffffffffc0b6461b>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [<ffffffffc0b81c59>] qed_mfw_process_tlv_req+0x299/0xbd0 [qed] [<ffffffff9b02a59e>] ? __switch_to+0xce/0x580 [<ffffffffc0b61e5b>] qed_slowpath_task+0x5b/0x80 [qed] Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-30scsi: qedi: Add the CRC size within iSCSI NVM imageNilesh Javali2-14/+21
The QED driver commit, 1ac4329a1cff ("qed: Add configuration information to register dump and debug data"), removes the CRC length validation causing nvm_get_image failure while loading qedi driver: [qed_mcp_get_nvm_image:2700(host_10-0)]Image [0] is too big - 00006008 bytes where only 00006004 are available [qedi_get_boot_info:2253]:10: Could not get NVM image. ret = -12 Hence add and adjust the CRC size to iSCSI NVM image to read boot info at qedi load time. Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-15/+17
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-07-30scsi: qedi: Fix a potential buffer overflowBart Van Assche1-1/+1
Tell snprintf() to store at most 255 characters in the output buffer instead of 256. This patch avoids that smatch reports the following warning: drivers/scsi/qedi/qedi_main.c:891: qedi_get_boot_tgt_info() error: snprintf() is printing too much 256 vs 255 Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: <QLogic-Storage-Upstream@cavium.com> Cc: <stable@vger.kernel.org> Acked-by: Nilesh Javali <nilesh.javali@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-10scsi: qedi: Send driver state to MFWManish Rangankar1-0/+11
In case of iSCSI offload BFS environment, MFW requires to mark virtual link based upon qedi load status. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-07-02scsi: qedi: tidy up a size calculationDan Carpenter1-1/+1
The id_tbl->table pointer points to unsigned long so static checkers complain that instead of 4 we should be allocating sizeof(long) bytes. We're trying to allocate enough bits for the bitmap. The size variable is always 1024. (1024 / 32 * 4) is the same as (1024 / 64 * 8) so this doesn't change runtime, but this is the more idiomatic way to do it and makes the static checker happy. [mkp: typo] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-26scsi: qedi: Fix misleading indentationBart Van Assche1-14/+16
This patch avoids that smatch reports the following warnings: drivers/scsi/qedi/qedi_fw_api.c:129: init_sqe() warn: inconsistent indenting drivers/scsi/qedi/qedi_fw_api.c:137: init_sqe() warn: inconsistent indenting Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: QLogic-Storage-Upstream@cavium.com Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05qed*: Utilize FW 8.37.2.0Michal Kalderon1-6/+0
This FW contains several fixes and features. RDMA - Several modifications and fixes for Memory Windows - drop vlan and tcp timestamp from mss calculation in driver for this FW - Fix SQ completion flow when local ack timeout is infinite - Modifications in t10dif support ETH - Fix aRFS for tunneled traffic without inner IP. - Fix chip configuration which may fail under heavy traffic conditions. - Support receiving any-VNI in VXLAN and GENEVE RX classification. iSCSI / FcoE - Fix iSCSI recovery flow - Drop vlan and tcp timestamp from mss calc for fw 8.37.2.0 Misc - Several registers (split registers) won't read correctly with ethtool -d Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22qedi: Add get_generic_tlv_data handler.Manish Rangankar1-0/+16
Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22qedi: Add support for populating ethernet TLVs.Manish Rangankar3-0/+191
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07qed: Add support for Unified Fabric Port.Sudarsana Reddy Kalluru1-1/+1
This patch adds driver changes for supporting the Unified Fabric Port (UFP). This is a new paritioning mode wherein MFW provides the set of parameters to be used by the device such as traffic class, outer-vlan tag value, priority type etc. Drivers receives this info via notifications from mfw and configures the hardware accordingly. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-05Merge tag 'scsi-for-linus' of ↵Linus Torvalds4-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 10:16:57 +0000