summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001
AgeCommit message (Collapse)AuthorFilesLines
2016-07-12pm8001: fix typoJulia Lawall1-1/+1
firmare -> firmware Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-09libata/libsas: Define ATA_CMD_NCQ_NON_DATAHannes Reinecke1-1/+2
Define the NCQ NON DATA command and update libsas to handle it correctly. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-05-09libsas: enable FPDMA SEND/RECEIVEHannes Reinecke1-1/+3
Update libsas and dependent drivers to handle FPDMA SEND/RECEIVE correctly. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-04-15pm80xx: Remove bogus address masking in pm8001_ioremap()David Daney1-2/+0
It is unclear what the original intent of the masking was, but it is clearly incorrect to truncate a physical address before calling ioremap(). On systems where there are valid physical address bits above bit-31 (arm64 for example) the result is an eventual OOPs when initializing the driver. Remove the bogus code to fix it. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-12Merge tag '4.4-scsi-mkp' into miscJames Bottomley4-14/+243
SCSI queue for 4.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09scsi: use host wide tags by defaultChristoph Hellwig1-1/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-09pm80xx: remove the SCSI host before detaching from SAS transportBenjamin Rood1-1/+1
Previously, when this module was unloaded via 'rmmod' with at least one drive attached, the SCSI error handler thread would become stuck in an infinite recovery loop and lockup the system, necessitating a reboot. Once the SAS layer is detached, the driver will fail any subsequent commands since the target devices are removed. However, removing the SCSI host generates a SYNCHRONIZE CACHE (10) command, which was failed and left the error handler no method of recovery. This patch simply removes the SCSI host first so that no more commands can come down, prior to cleaning up the SAS layer. Note that the stack is built up with the SCSI host first, and then the SAS layer. Perhaps it should be reversed for symmetry, so that commands cannot be sent to the pm80xx driver prior to attaching the SAS layer? What was really strange about this bug was that it was introduced at commit cff549e4860f ("[SCSI]: proper state checking and module refcount handling in scsi_device_get"). This commit appears to tinker with how the reference counting is performed for SCSI device objects. My theory is that prior to this commit, the refcount for a device object was blindly incremented at some point during the teardown process which coincidentially made the device stick around during the procedure, which also coincidentially made any commands sent to the driver not fail (since the device was technically still "there"). After this commit was applied, my theory is the refcount for the device object is not being incremented at a specific point anymore, which makes the device go away, and thus made the pm80xx driver fail any subsequent commands. You may also want to see the following for more details: [1] http://www.spinics.net/lists/linux-scsi/msg37208.html [2] http://marc.info/?l=linux-scsi&m=144416476406993&w=2 Signed-off-by: Benjamin Rood <brood@attotech.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: avoid a panic if MSI(X) interrupts are disabledBenjamin Rood1-5/+11
If MSI(X) interrupts are disabled via the kernel command line (pci=nomsi), the pm8001 driver will kernel panic because it does not detect that MSI interrupts are disabled and will soldier on and attempt to configure MSI interrupts anyways. This leads to a kernel panic, most likely because a required data structure is not available down the line. Using the pci_msi_enabled() function in order to detect if MSI interrupts are enabled before configuring them resolves this issue and avoids a kernel panic when the module is loaded. Additionally, the irq_vector structure must be initialized when legacy interrupts are being used otherwise legacy interrupts will simply not function and result in another panic. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: wait a minimum of 500ms before issuing commands to SPCvBenjamin Rood1-0/+13
The documentation for the 8070 and 8072 SPCv chip explicitly states that a minimum of 500ms must elapse before issuing commands, otherwise the SPCv may not process them and the firmware may get into an unrecoverable state requiring a reboot. While the Linux guys will probably think this is 'racy', it is called out in the chip documentation and inserting this delay makes power management function properly. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: do not examine registers for iButton feature if ATTO adapterBenjamin Rood1-0/+2
ATTO adapters do not support this feature. If the firmware fails to be ready, it should not check the examined registers in order to examine the state of the feature in order to prevent undefined behavior. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: set PHY profiles for ATTO 12Gb SAS controllersBenjamin Rood3-0/+164
PHY profiles are not saved in NVRAM on ATTO 12Gb SAS controllers. Therefore, in order for the controller to function in a wide range of configurations, the PHY profiles must be statically set. This patch provides the necessary functionality to do so. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: add support for ATTO devices during SAS address initiailizationBenjamin Rood1-0/+10
ATTO SAS controllers retrieve the SAS address from the NVRAM in a location different from non-ATTO PMC Sierra SAS controllers. This patch makes the necessary adjustments in order to retrieve the SAS address on these types of adapters. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: add ATTO PCI IDs to pm8001_pci_tableBenjamin Rood1-0/+14
These PCI IDs allow the pm8001 driver to load against ATTO 12Gb SAS controllers that use PMC Sierra 8070 and PMC Sierra 8072 SAS chips. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: add support for PMC Sierra 8070 and PMC Sierra 8072 SAS controllersBenjamin Rood3-2/+8
These SAS controllers support speeds up to 12Gb. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-02pm80xx: configure PHY settings based on subsystem vendor IDBenjamin Rood1-6/+20
Previuosly, all PMC Sierra 80xx controllers are assumed to be a motherboard controller, except if the subsystem vendor ID was equal to PCI_VENDOR_ID_ADAPTEC. The driver then attempts to load PHY settings from NVRAM. While this may be correct behavior for most controllers, it does not work with Adaptec and ATTO controllers since they do not store PHY settings in NVRAM and choose to use either custom PHY settings or chip defaults. Loading random values from NVRAM may cause the controllers to malfunction in this edge case. Signed-off-by: Benjamin Rood <brood@attotech.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-09-06pm80xx: Don't override ts->stat on IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSYJohannes Thumshirn2-0/+2
In case psataPayload->status has a status of IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY ts->stat gets set to SAS_OPEN_REJECT but a missing 'break' statement causes a fallthrough to the default handler of the switch statement overriding ts->stat to SAS_DEV_NO_RESPONSE. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Bump pm80xx driver version to 0.1.38Viswas G1-1/+1
Bump pm80xx driver version to 0.1.38. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Handling Invalid SSP Response frameViswas G2-1/+8
The request has to be retried incase if the length of the SSP Response IU is invalid. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Add PORT RECOVERY TIMEOUT supportViswas G2-17/+68
PORT RECOVERY TIMEOUT is the maximum time between the controller's detection of the PHY down until the receipt of the ID_Frame (from the same remote SAS port). If the time expires before the ID_FRAME is received, the port is considered INVALID and can be removed. The IOP_EVENT_PORT_RECOVERY_TIMER_TMO event is reported following the IOP_EVENT_ PHY_DOWN event when the PHY/port does not recover after Port Recovery Time. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Remove unnecessary phy disconnect while link errorViswas G1-12/+0
If the link error happens, we don't need to disconnect the phy, which will remove the drive. Instead acknowledging the controller and logging the error will be enough. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Fix for Incorrect DMA Unmapping of SG ListViswas G1-0/+1
In pm8001_ccb_task_free(), the dma unmapping is done based on ccb->n_elem value. This should be initialized to zero in the task_abort(). Otherwise, pm8001_ccb_task_free() will try for dma_unmap_sg() which is invalid for task abort and can lead to kernel crash. Changes From V1: None Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Update For Thermal Page CodeViswas G2-2/+10
Thermal page code has been changed to 7 for the 12G controllers. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Corrected device state changes in I_T_Nexus_Reset.Viswas G2-5/+21
In Nexus reset the device state request are not needed. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26pm80xx: Updated link rateViswas G2-0/+5
Updated 12G linkrate to libsas. Signed-off-by: Viswas G <Viswas.G@pmcs.com> Reviewed-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12pm80xx: Added pm8006 controller supportSuresh Thiagarajan2-2/+6
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Viswas G <Viswas.G@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-31scsi: Do not set cmd_per_lun to 1 in the host templateHannes Reinecke1-1/+0
'0' is now used as the default cmd_per_lun value, so there's no need to explicitly set it to '1' in the host template. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-12-18Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linusJames Bottomley1-1/+0
2014-12-11Merge branch 'for-3.19' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata changes from Tejun Heo: "The only interesting piece is the support for shingled drives. The changes in libata layer are minimal. All it does is identifying the new class of device and report upwards accordingly" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: Remove FIXME comment in atapi_request_sense() sata_rcar: Document deprecated "renesas,rcar-sata" sata_rcar: Add clocks to sata_rcar bindings ahci_sunxi: Make AHCI_HFLAG_NO_PMP flag configurable with a module option libata-scsi: Update SATL for ZAC drives libata: Implement ATA_DEV_ZAC libsas: use ata_dev_classify()
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-1/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-27libsas: remove task_collector modeChristoph Hellwig3-21/+6
The task_collector mode (or "latency_injector", (C) Dan Willians) is an optional I/O path in libsas that queues up scsi commands instead of directly sending it to the hardware. It generall increases latencies to in the optiomal case slightly reduce mmio traffic to the hardware. Only the obsolete aic94xx driver and the mvsas driver allowed to use it without recompiling the kernel, and most drivers didn't support it at all. Remove the giant blob of code to allow better optimizations for scsi-mq in the future. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-0/+1
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-0/+1
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-05libsas: use ata_dev_classify()Hannes Reinecke2-2/+2
Use the ata device class from libata in libsas instead of checking the supported command set and switch to using ata_dev_classify() instead of our own method. Cc: Tejun Heo <tj@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-09-16pm8001: Update nvmd response data to request bufferSuresh Thiagarajan2-3/+9
Instead of using the virt_ptr use request buffer for copying back the nvmd response data and use the same in request function also Signed-off-by: Suresh Thiagarajan <suresh.thiagarajan@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-15Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds3-95/+92
Pull more SCSI changes from James Bottomley: "This is a small set of updates which missed the first pull. It's more msix updates, some iscsi and qla4xxx fixes, we also have some string null termination fixes a return value fix and a couple of pm8001 firmware fixes. Just a note, we do have a couple of bug fixes coming under separate cover, but they don't have to be part of the merge window" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: iscsi class: Fix freeing of skb in get host error path scsi: fix u14-34f printk format warnings pm8001: fix pm8001_store_update_fw pm8001: Fix erratic calculation in update_flash pm8001: Update MAINTAINERS list libiscsi: return new error code when nop times out iscsi class: fix get_host_stats return code when not supported iscsi class: fix get_host_stats error handling qla4xxx: fix get_host_stats error propagation qla4xxx: check the return value of dma_alloc_coherent() scsi: qla4xxx: ql4_mbx.c: Cleaning up missing null-terminate in conjunction with strncpy scsi: qla4xxx: ql4_os.c: Cleaning up missing null-terminate in conjunction with strncpy qla4xxx: Use pci_enable_msix_exact() instead of pci_enable_msix() pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()
2014-08-08scsi: use pci_zalloc_consistentJoe Perches1-3/+2
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Adam Radford <linuxraid@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: Michael Neuffer <mike@i-Connect.Net> Cc: "Stephen M. Cameron" <scameron@beardog.cce.hp.com> Cc: Neela Syam Kolli <megaraidlinux@lsi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-01pm8001: fix pm8001_store_update_fwTomas Henzl2-71/+70
The current implementation may mix the negative value returned from pm8001_set_nvmd with count. -(-ENOMEM) could be interpreted as bytes programmed, this patch fixes it. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-08-01pm8001: Fix erratic calculation in update_flashTomas Henzl1-5/+2
The loopcount is calculated by using some weird magic. Use instead a boring macro. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-30pm8001: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev1-19/+20
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Reviewed-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-29pm8001: Fix invalid return when request_irq() failedAlexander Gordeev1-2/+3
When a call to request_irq() failed pm8001_setup_msix() still returns the success. This udate fixes the described misbehaviour. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix a memory leak in nvmd_respTomas Henzl1-6/+2
Instead of copying information to fw_control_context free it. The task is forgotten thus also the reference to fw_control_context and the completion thread takes the info from virt_ptr again. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix update_flashTomas Henzl1-3/+3
The driver checks the return valu, but after he tries to wait_for_completion which might never happen. Also the ioctl buffer is freed at the end of the function, so the first removal is not needed. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: fix a memory leak in flash_updateTomas Henzl1-6/+6
ccb->fw_control_context is copied to local fw_control_context and the local variable is never used later Free ccb->fw_control_context. The task is forgotten thus also the reference to fw_control_context and the completion thread takes the info from virt_ptr again. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Cleaning up uninitialized variablesRickard Strandqvist1-4/+2
There is a risk that the variable will be used without being initialized. This was largely found by using a static code analysis program called cppche Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Fix to remove null pointer checks that could never happenRickard Strandqvist1-1/+1
Removal of null pointer checks that could never happen Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: more fixes to honor return valueTomas Henzl2-3/+24
The driver ignores the return value in a lot of places, fix it at least somewhere (and release the resources in such cases), to avoid that bad things happen. A memory leak is fixed too. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: add a new spinlock to protect the CCBTomas Henzl3-1/+8
Patch adds a new spinlock to protect the ccb management. It may happen that concurrent threads become the same tag value from the 'alloc' function', the spinlock prevents this situation. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: honor return valueTomas Henzl2-17/+58
The driver ignores the return value in a lot of places, fix it at least somewhere (and release the resources in such cases), to avoid that bad things happen. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: clean bitmap management functionsTomas Henzl3-30/+12
In the driver two different functions are used to free the same resource, this patch makes the code easier to read. In addittion to that, some minor optimisations were made too. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25pm8001: Fix hibernation issueBradley Grove1-2/+10
During hibernation, the HBA firmware may lose power and forget the device id info. This causes the HBA to reject IO upon resume. The fix is to call the libsas power management routines to make the domain device forgetful. This fixes bug 76681: https://bugzilla.kernel.org/show_bug.cgi?id=76681 Signed-off-by: Bradley Grove <bgrove@attotech.com> Acked-by: Jack Wang <xjtuwjp@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>