summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mpt3sas/mpt3sas_ctl.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-8/+8
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-08-24scsi: mpt3sas: Remove pci-dma-compat wrapper APISuraj Upadhyay1-6/+4
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as they create unnecessary midlayering for include/linux/dma-mapping.h API. Instead use dma-mapping.h API directly. The patch has been generated with the coccinelle script below. Compile tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Link: https://lore.kernel.org/r/e825ac7108092cc8fa8d462dc702098ef10fc6a2.1596045683.git.usuraj35@gmail.com Signed-off-by: Suraj Upadhyay <usuraj35@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-20scsi: mpt3sas: Add functions to check if any cmd is outstanding on Target ↵Suganath Prabu S1-2/+4
and LUN Add helper functions to check whether any SCSI command is outstanding on particular Target, LUN device. Also add function parameters 'channel', 'id' to function mpt3sas_scsih_issue_tm(). Link: https://lore.kernel.org/r/1596096229-3341-6-git-send-email-suganath-prabu.subramani@broadcom.com Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-08-06Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-6/+10
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a huge docbook fix update like most other subsystems and no major update to the core (the few non trivial updates are either minor fixes or removing an unused feature [scsi_sdb_cache])" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits) scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM" scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged scsi: scsi_debug: Implement tur_ms_to_ready parameter scsi: scsi_debug: Fix request sense scsi: lpfc: Fix typo in comment for ULP scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC scsi: iscsi: Do not put host in iscsi_set_flashnode_param() scsi: hpsa: Correct ctrl queue depth scsi: target: tcmu: Make TMR notification optional scsi: target: tcmu: Implement tmr_notify callback scsi: target: tcmu: Fix and simplify timeout handling scsi: target: tcmu: Factor out new helper ring_insert_padding scsi: target: tcmu: Do not queue aborted commands scsi: target: tcmu: Use priv pointer in se_cmd scsi: target: Add tmr_notify backend function scsi: target: Modify core_tmr_abort_task() scsi: target: iscsi: Fix inconsistent debug message scsi: target: iscsi: Fix login error when receiving ...
2020-07-08scsi: mpt3sas: Fix kdoc comments formatDamien Le Moal1-6/+10
Fix kdoc comments format to avoid compiler warnings when compiling with W=1. No functional changes. Link: https://lore.kernel.org/r/20200706123358.452180-1-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-07scsi: mpt3sas: Fix error returns in BRM_status_showJohannes Thumshirn1-4/+6
BRM_status_show() has several error branches, but none of them record the error in the error return. Also while at it remove the manual mutex_unlock() of the pci_access_mutex in case of an ongoing pci error recovery or host removal and jump to the cleanup label instead. Note: We can safely jump to out from here as io_unit_pg3 is initialized to NULL and if it hasn't been allocated, kfree() skips the NULL pointer. [mkp: compilation warning] Link: https://lore.kernel.org/r/20200701131454.5255-1-johannes.thumshirn@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-02scsi: mpt3sas: Fix unlock imbalanceDamien Le Moal1-1/+1
In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on entry to the function is true, a "goto out" is called. This results in unlocking ioc->pci_access_mutex without this mutex lock being taken. This generates the following splat: [ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive [ 1148.547184] [ 1148.548708] ===================================== [ 1148.553501] WARNING: bad unlock balance detected! [ 1148.558277] 5.8.0-rc3+ #827 Not tainted [ 1148.562183] ------------------------------------- [ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at: [ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.580574] but there are no more locks to release! [ 1148.585524] [ 1148.585524] other info that might help us debug this: [ 1148.599624] 3 locks held by cat/5008: [ 1148.607085] #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480 [ 1148.618509] #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0 [ 1148.630729] #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0 [ 1148.643347] [ 1148.643347] stack backtrace: [ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827 [ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 1148.678394] Call Trace: [ 1148.684750] dump_stack+0x78/0xa0 [ 1148.691802] lock_release.cold+0x45/0x4a [ 1148.699451] __mutex_unlock_slowpath+0x35/0x270 [ 1148.707675] BRM_status_show+0xd3/0x100 [mpt3sas] [ 1148.716092] dev_attr_show+0x19/0x40 [ 1148.723664] sysfs_kf_seq_show+0x87/0x100 [ 1148.731193] seq_read+0xbc/0x480 [ 1148.737882] vfs_read+0xa0/0x160 [ 1148.744514] ksys_read+0x58/0xd0 [ 1148.751129] do_syscall_64+0x4c/0xa0 [ 1148.757941] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1148.766240] RIP: 0033:0x7f1230566542 [ 1148.772957] Code: Bad RIP value. [ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542 [ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003 [ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000 [ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000 [ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 Fix this by returning immediately instead of jumping to the out label. Link: https://lore.kernel.org/r/20200701085254.51740-1-damien.lemoal@wdc.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Print function name in which cmd timed outSreekanth Reddy1-15/+15
Print the function name in which MPT command got timed out. This will facilitate debugging in which path corresponding MPT command got timeout in first failure instance of log itself. Link: https://lore.kernel.org/r/20191226111333.26131-9-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: Optimize mpt3sas driver loggingSreekanth Reddy1-1/+8
This improves mpt3sas driver default debug information collection and allows for a higher percentage of issues being able to be resolved with a first-time data capture. However, this improvement to balance the amount of debug data captured with the performance of driver. Enabled below print messages with out affecting the IO performance, 1. When task abort TM is received then print IO commands's timeout value and how much time this command has been outstanding. 2. Whenever hard reset occurs then print from where this hard reset has been issued. 3. Failure message should be displayed for failure scenarios without any logging level. 4. Added a print after driver successfully register or unregistered a target drive with the SML. This print will be useful for debugging the issue where the drive addition or deletion is hanging at SML. 5. During driver load time print request, reply, sense and config page pool's information such as its address, length and size. Also printed sg_tablesize information. Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: mpt3sas: renamed _base_after_reset_handler functionSreekanth Reddy1-3/+4
Renamed _base_after_reset_handler function to _base_clear_outstanding_commands so that it can be used in multiple scenarios with suitable name which matches with the operation it does. Also renamed its child functions. No functional changes. Link: https://lore.kernel.org/r/20191226111333.26131-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-09scsi: mpt3sas: Clean up some indentingDan Carpenter1-1/+1
This line is indented too far so it's a bit confusing. Link: https://lore.kernel.org/r/20191004100615.GA823@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Reject NVMe Encap cmnds to unsupported HBASreekanth Reddy1-0/+12
If any faulty application issues an NVMe Encapsulated commands to HBA which doesn't support NVMe protocol then driver should return the command as invalid with the following message. "HBA doesn't support NVMe. Rejecting NVMe Encapsulated request." Otherwise below page fault kernel panic will be observed while building the PRPs as there is no PRP pools allocated for the HBA which doesn't support NVMe drives. RIP: 0010:_base_build_nvme_prp+0x3b/0xf0 [mpt3sas] Call Trace: _ctl_do_mpt_command+0x931/0x1120 [mpt3sas] _ctl_ioctl_main.isra.11+0xa28/0x11e0 [mpt3sas] ? prepare_to_wait+0xb0/0xb0 ? tty_ldisc_deref+0x16/0x20 _ctl_ioctl+0x1a/0x20 [mpt3sas] do_vfs_ioctl+0xaa/0x620 ? vfs_read+0x117/0x140 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x60/0x190 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [mkp: tweaked error string] Link: https://lore.kernel.org/r/1568379890-18347-12-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Fail release cmnd if diag buffer is releasedSreekanth Reddy1-1/+1
Return the diag buffer release command with -EINVAL status if the buffer is already released. Link: https://lore.kernel.org/r/1568379890-18347-10-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Add app owned flag support for diag bufferSreekanth Reddy1-1/+42
Added a new status flag named MPT3_DIAG_BUFFER_IS_APP_OWNED and it will set whenever application registers the diag buffer & it will be cleared when application unregisters the buffer. When this flag is enabled, and if application issues diag buffer register command without releasing the buffer, then register command will be failed with -EINVAL status by saying that this buffer is already registered by the application. When user issues a trace buffer register command through sysfs parameter, and if trace buffer is in released stated but not yet unregistered by the application which was owning it, then driver will unregister the buffer by itself and freshly register the 1MB sized trace buffer with the HBA firmware. Link: https://lore.kernel.org/r/1568379890-18347-9-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Reuse diag buffer allocated at load timeSreekanth Reddy1-21/+67
The diag buffer which is allocated during driver load time or through sysfs parameter is marked as driver allocated diag buffer. MPT3_DIAG_BUFFER_IS_DRIVER_ALLOCATED bit will be set for this buffer. This buffer won't be de-allocated even when application issues unregister command, driver just clears the registered status bit. Same buffer will be reused while re-registering the same diag buffer type by any application. While re-registering the same diag buffer type application has to register with the same size that the buffer was allocated during driver load time. This buffer size can be read by the application by issuing diag 'query' command. This always makes sure that the memory is available for applications for collecting the firmware logs. Only thing is that this won't allow the application to re-register the diag buffer with different size, but the buffer size which is allocated during driver load time will be enough for most of the cases for collecting the firmware logs. Link: https://lore.kernel.org/r/1568379890-18347-8-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: clear release bit when buffer reregisteredSreekanth Reddy1-0/+2
Clear MPT3_DIAG_BUFFER_IS_RELEASED bit once diag buffer is re-registered after reading the buffer, else driver won't release the buffer and return the 'diag release' command with -EINVAL status saying that buffer is already released. Link: https://lore.kernel.org/r/1568379890-18347-7-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Maintain owner of buffer through UniqueIDSreekanth Reddy1-9/+105
Application A has registered a diag buffer and looking for particular event to happen to release & read the trace buffer. Meanwhile application B has unregistered the diag buffer and now Application A can't get the required diag buffer. So proper diag buffer ownership is missing. Each application has to maintain its own Unique ID. Now driver has to save the Application's UniqueID for each diag buffer type when diag buffer is registered. And driver has to allow 'release', 'read' & 'unregister' diag commands only if application's UniqueID matches with saved UniqueID for the corresponding diag buffer type. When diag buffer is registered by the driver, then the UniqueID saved by the driver is "BRCM" (i.e. 0x4252434D) for SAS3 and above generations HBA devices. For SAS2 HBAs, driver keeps the legacy UniqueID 0x07075900 for maintaining compatibility with the legacy SAS2 application and this improvement won't be applicable for SAS2 HBA devices. Any application can own the buffer registered by the driver by sending diag register request to driver with same buffer type and size (Application can get the buffer size by sending 'query' command). Then driver changes the ownership of the buffer by saving application's UniqueID for that corresponding buffer type. Also, application can re-register the diag buffer with same size without un-registering it, but diag buffer should be released before re-registering it. By allowing this, driver no need to deallocate and allocate a new buffer for re-register command, same buffer can be re-used. Link: https://lore.kernel.org/r/1568379890-18347-6-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Free diag buffer without any status checkSreekanth Reddy1-6/+0
Memory leak can happen when diag buffer is released but not unregistered (where buffer is deallocated) by the user. During module unload time driver is not deallocating the buffer if the buffer is in released state. Deallocate the diag buffer during module unload time without any diag buffer status checks. Link: https://lore.kernel.org/r/1568379890-18347-5-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Fix clear pending bit in ioctl statusSreekanth Reddy1-1/+2
When user issues diag register command from application with required size, and if driver unable to allocate the memory, then it will fail the register command. While failing the register command, driver is not currently clearing MPT3_CMD_PENDING bit in ctl_cmds.status variable which was set before trying to allocate the memory. As this bit is set, subsequent register command will be failed with BUSY status even when user wants to register the trace buffer will less memory. Clear MPT3_CMD_PENDING bit in ctl_cmds.status before returning the diag register command with no memory status. Link: https://lore.kernel.org/r/1568379890-18347-4-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Display message before releasing diag bufferSreekanth Reddy1-0/+7
Display message before releasing the diag buffer so that user knows which event caused the release of diag buffer. Releasing of diag buffer means HBA firmware stops posting the firmware logs on the registered diag buffer. Link: https://lore.kernel.org/r/1568379890-18347-3-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30scsi: mpt3sas: Register trace buffer based on NVDATA settingsSreekanth Reddy1-4/+67
Currently if user wishes to enable the host trace buffer during driver load time, then user has to load the driver with module parameter 'diag_buffer_enable' set to one. Alternatively now the user can enable host trace buffer by enabling the following fields in manufacturing page11 in NVDATA (nvdata xml is used while building HBA firmware image): * HostTraceBufferMaxSizeKB - Maximum trace buffer size in KB that host can allocate, * HostTraceBufferMinSizeKB - Minimum trace buffer size in KB atleast host should allocate, * HostTraceBufferDecrementSizeKB - size by which host can reduce from buffer size and retry the buffer allocation when buffer allocation failed with previous calculated buffer size. The driver will register the trace buffer automatically without any module parameter during boot time when above fields are enabled in manufacturing page11 in HBA firmware. Driver follows the following algorithm for enabling the host trace buffer during driver load time: * If user has loaded the driver with module parameter 'diag_buffer_enable' set to one, then driver allocates 2MB buffer and registers this buffer with HBA firmware for capturing the firmware trace logs. * Else driver reads manufacture page11 data and checks whether HostTraceBufferMaxSizeKB filed is zero or not? - If HostTraceBufferMaxSizeKB is non-zero then driver tries to allocate HostTraceBufferMaxSizeKB size of memory. If the buffer allocation is successful, then it will register this buffer with HBA firmware, else in a loop the driver will try again by reducing the current buffer size with HostTraceBufferDecrementSizeKB size until memory allocation is successful or buffer size falls below HostTraceBufferMinSizeKB. If the memory allocation is successful, then the buffer will be registered with the firmware. Else, if the buffer size falls below the HostTraceBufferMinSizeKB, then driver won't register trace buffer with HBA firmware. - If HostTraceBufferMaxSizeKB is zero, then driver won't register trace buffer with HBA firmware. Link: https://lore.kernel.org/r/1568379890-18347-2-git-send-email-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-29scsi: mpt3sas: Introduce module parameter to override queue depthSreekanth Reddy1-0/+102
This patch provides a module parameter and sysfs interface to select whether the queue depth for each device should be based on the protocol-specific value set by the driver (the default) or the maximum supported by the controller (can_queue). Although we have a sysfs interface per sdev to change the queue depth of individual scsi devices, this implementation provides a single sysfs entry per shost to switch between the controller max and the driver default. [mkp: tweaked commit desc] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: mpt3sas: Add sysfs to know supported featuresSuganath Prabu1-0/+19
Currently with sysfs parameter "drv_support_bitmap" driver exposes whether driver supports toolbox memory move command or not. And application should issue the toolbox memory move command only if driver tell that memory move tool box command is supported through this sysfs parameter. In future we can utilize this sysfs parameter if any new feature is added and need to notify the same to applications. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: mpt3sas: Support MEMORY MOVE Tool box commandSuganath Prabu1-2/+25
Host uses the Memory Move Tool to copy data from any source/destination combination of system memory and IOC memory. Memory Move Tool box request contains two SGE fields, First SGE field must contains the source buffer details described by an MPI Simple SGE. The second SGE field must contains the destination buffer details described by an MPI Simple SGE. Source -> Destination 1. IOC -> IOC (Both the SGE's will be filled by application) 2. HOST -> HOST (Both the SGE's will be filled by the host, application should give sgl_offset to first SGE offset) 3. IOC -> HOST (Application will fill the first SGE and set the sgl_offset to second SGE and hence driver fills the second SGE) 4. HOST -> IOC (Application will fill IOC buffer information in the first SGE and set the sgl_offset to second SGE. Then driver will fill the second SGE with Host buffer information and just before posting the command to the firmware, driver will swap these two SGEs so that first SGE contains the HOST buffer information and second SGE contains the IOC information. Driver has to take care only of the 4th case, other three cases are by default supported by the current driver design. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: mpt3sas: Enumerate SES of a managed PCIe switchSuganath Prabu1-3/+4
SES device of managed PCIe switch will be enumerated same as NVMe drives. The device info type for this SES device is MPI26_PCIE_DEVINFO_SCSI (0x4), whereas the device info type for NVMe drives is MPI26_PCIE_DEVINFO_NVME (0x3). Based on this device info type driver determines whether the device is NVMe drive or a SES device of a managed PCIe switch. This SES device doesn't have the PCIe device page 2 information like NVMe drives, so driver won't read PCIe device page 2 information for SES device. This SES device uses only IEEE SGL's, So driver build's IEEE SGL's whenever it receives any SCSI commands for this SES device. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: mpt3sas: memset request frame before reusingSuganath Prabu1-0/+1
Driver gets a request frame from the free pool of DMA-able request frames and fill in the required information and pass the address of the frame to IOC/FW to pull the complete request frame. In certain places the driver used the request frame allocated from the free pool without completely clearing the previous data stored in it. The request contents were cleared only for the size of the new request to be issued and that left out some stale data in the unused part of the request. Though the IOC/FW is not expected to access the request beyond the specified size, it is good practice to clear complete request message frame. So reinitialize the complete request message frame with 0s before using it. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: mpt3sas: Add support for PCIe Lane marginSuganath Prabu1-3/+4
PCIe Lane margin tool box request requires IEEE sgl's and hence driver fills the SGL field with IEEE sgl's while issuing the PCIe Lane margin ioctl request to the HBA firmware. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30scsi: mpt3sas: support target smid for [abort|query] taskMinwoo Im1-2/+10
We can request task management IOCTL command(MPI2_FUNCTION_SCSI_TASK_MGMT) to /dev/mpt3ctl. If the given task_type is either abort task or query task, it may need a field named "Initiator Port Transfer Tag to Manage" in the IU. Current code does not support to check target IPTT tag from the tm_request. This patch introduces to check TaskMID given from the userspace as a target tag. We have a rule of relationship between (struct request *req->tag) and smid in mpt3sas_base.c: 3318 u16 3319 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, 3320 struct scsi_cmnd *scmd) 3321 { 3322 struct scsiio_tracker *request = scsi_cmd_priv(scmd); 3323 unsigned int tag = scmd->request->tag; 3324 u16 smid; 3325 3326 smid = tag + 1; So if we want to abort a request tagged #X, then we can pass (X + 1) to this IOCTL handler. Otherwise, user space just can pass 0 TaskMID to abort the first outstanding smid which is legacy behaviour. Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Minwoo Im <minwoo.im@samsung.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30scsi: mpt3sas: clean up a couple sizeof() usesDan Carpenter1-3/+2
There is a copy and paste bug here. It uses EVENT_TRIGGERS size instead of SCSI_TRIGGERS size but fortunately both size are 84 bytes so it doesn't affect runtime. These days the preferred style is to just say sizeof(object) instead of sizeof(type) so I have updated the function to the latest style as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mpt3sas: use DEVICE_ATTR_{RO, RW}Tomas Henzl1-113/+97
Use existing macros. No functional change. [mkp: typo] Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: function pointers of request descriptorSuganath Prabu S1-10/+10
This code refactoring introduces function pointers. Host uses Request Descriptors of different types for posting an entry onto a request queue. Based on controller type and capabilities, host can also use atomic descriptors other than normal descriptors. Using function pointer will avoid if-else statements Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas_ctl: fix double-fetch bug in _ctl_ioctl_main()Gen Zhang1-0/+4
In _ctl_ioctl_main(), 'ioctl_header' is fetched the first time from userspace. 'ioctl_header.ioc_number' is then checked. The legal result is saved to 'ioc'. Then, in condition MPT3COMMAND, the whole struct is fetched again from the userspace. Then _ctl_do_mpt_command() is called, 'ioc' and 'karg' as inputs. However, a malicious user can change the 'ioc_number' between the two fetches, which will cause a potential security issues. Moreover, a malicious user can provide a valid 'ioc_number' to pass the check in first fetch, and then modify it in the second fetch. To fix this, we need to recheck the 'ioc_number' in the second fetch. Signed-off-by: Gen Zhang <blackgod016574@gmail.com> Acked-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06scsi: mpt3sas: Separate out mpt3sas_wait_for_iocSuganath Prabu1-18/+3
No functional changes. This section of code "wait for IOC to be operational" is used in many places across the driver. Factor this code out into a new mpt3sas_wait_for_ioc(). Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-11-06scsi: mpt3sas: Added new #define variable IOC_OPERATIONAL_WAIT_COUNTSuganath Prabu1-1/+1
Added new #define variable IOC_OPERATIONAL_WAIT_COUNT and it replaces hard coded value '10' in all the places where driver is waiting for the IOC to become operational. Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17scsi: mpt3sas: switch to generic DMA APIChristoph Hellwig1-16/+18
Switch from the legacy PCI DMA API to the generic DMA API. Also simplify setting the DMA mask a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-10scsi: mpt3sas: Convert uses of pr_<level> with MPT3SAS_FMT to ioc_<level>Joe Perches1-285/+208
Use a more common logging style. Done using the perl script below and some typing $ git grep --name-only -w MPT3SAS_FMT -- "*.c" | \ xargs perl -i -e 'local $/; while (<>) { s/\bpr_(info|err|notice|warn)\s*\(\s*MPT3SAS_FMT\s*("[^"]+"(?:\s*\\?\s*"[^"]+"\s*){0,5}\s*),\s*ioc->name\s*/ioc_\1(ioc, \2/g; print;}' Miscellanea for these conversions: o Coalesce formats o Realign arguments o Remove unnecessary parentheses o Use casts to u64 instead of unsigned long long where appropriate o Convert broken pr_info uses to pr_cont o Fix broken format string concatenation with line continuations and excess whitespace Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: mpt3sas: Improve kernel-doc headersBart Van Assche1-116/+151
Avoids that warnings about the kernel headers appear when building with W=1. Remove useless "@Returns - Nothing" clauses. Change "@Return - " into "Return: ". Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: mpt3sas: Split _base_reset_handler(), mpt3sas_scsih_reset_handler() ↵Bart Van Assche1-40/+49
and mpt3sas_ctl_reset_handler() Split each of these functions in three functions - one function per reset phase. This patch does not change any functionality but makes the code easier to read. Note: it is much easier to review the git diff -w output after having applied this patch than by reviewing the patch itself. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-19scsi: mpt3sas: Annotate switch/case fall-throughBart Van Assche1-0/+1
This patch avoids that gcc complains about switch/case fall-through when building with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-06-18scsi: mpt3sas: Fix, False timeout prints for ioctl and other internal ↵Chaitra P B1-23/+15
commands during controller reset. When an ioctl is sent to FW, and if there is a controller reset issued before ioctl gets completed, then in controller reset path all the pending ioctl commands are terminated from "mpt3sas_ctl_reset_handler" function. This will wake up the waiting ioctl commands in ioctl path and print timeouts which are actually not timeouts. Introduced "mpt3sas_base_check_cmd_timeout" function to check and print whether command got timed out (or) terminated due to Host reset. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: mpt3sas: For NVME device, issue a protocol level resetChaitra P B1-4/+18
1) Manufacturing Page 11 contains parameters to control internal firmware behavior. Based on AddlFlags2 field FW/Driver behaviour can be changed, (flag tm_custom_handling is used for this) a) For PCIe device, protocol level reset should be used if flag tm_custom_handling is 0. Since Abort Task Set, LUN reset and Target reset will result in a protocol level reset. Drivers should issue only one type of this reset, if that fails then it should escalate to a controller reset (diag reset/OCR). b) If the driver has control over the TM reset timeout value, then driver should use the value exposed in PCIe Device Page 2 for pcie device (field ControllerResetTO). Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-05-08scsi: mpt3sas: Bug fix for big endian systems.Chaitra P B1-5/+6
This patch fixes sparse warnings and bugs on big endian systems. Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-27scsi: mpt3sas: Do not use 32-bit atomic request descriptor for Ventura ↵Suganath Prabu S1-11/+11
controllers. Sending I/O through 32 bit descriptors to Ventura series of controller results in IO timeout on certain conditions. This error only occurs on systems with high I/O activity. Changes in this patch will prevent driver from using 32 bit descriptor and use 64 bit Descriptors Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-19/+12
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual driver suspects: arcmsr, scsi_debug, mpt3sas, lpfc, cxlflash, qla2xxx, aacraid, megaraid_sas, hisi_sas. We also have a rework of the libsas hotplug handling to make it more robust, a slew of 32 bit time conversions and fixes, and a host of the usual minor updates and style changes. The biggest potential for regressions is the libsas hotplug changes, but so far they seem stable under testing" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (313 commits) scsi: qla2xxx: Fix logo flag for qlt_free_session_done() scsi: arcmsr: avoid do_gettimeofday scsi: core: Add VENDOR_SPECIFIC sense code definitions scsi: qedi: Drop cqe response during connection recovery scsi: fas216: fix sense buffer initialization scsi: ibmvfc: Remove unneeded semicolons scsi: hisi_sas: fix a bug in hisi_sas_dev_gone() scsi: hisi_sas: directly attached disk LED feature for v2 hw scsi: hisi_sas: devicetree: bindings: add LED feature for v2 hw scsi: megaraid_sas: NVMe passthrough command support scsi: megaraid: use ktime_get_real for firmware time scsi: fnic: use 64-bit timestamps scsi: qedf: Fix error return code in __qedf_probe() scsi: devinfo: fix format of the device list scsi: qla2xxx: Update driver version to 10.00.00.05-k scsi: qla2xxx: Add XCB counters to debugfs scsi: qla2xxx: Fix queue ID for async abort with Multiqueue scsi: qla2xxx: Fix warning for code intentation in __qla24xx_handle_gpdb_event() scsi: qla2xxx: Fix warning during port_name debug print scsi: qla2xxx: Fix warning in qla2x00_async_iocb_timeout() ...
2018-01-10scsi: mpt3sas: lockless command submissionSuganath Prabu Subramani1-9/+8
Performance improvement using block layer tag. Curent driver gets scsiio tracker and free smid from link list and array based tracking managed by driver. Accessing list in main io path is performance pentaly because of protection using spinlock "scsi_lookup_lock". In this patch: 1. Driver removes all link list access from main io path and use scmd->request->tag to get free smid. 2. Instead of holding 'struct scsiio_tracker' in its own pool driver can embed it into the scsi command. Driver provides cmd_size in scsi_host_template, so that struct scsiio_tracker is preallocated by scsi mid layer for each scsi command. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: mpt3sas: simplify mpt3sas_scsi_issue_tm()Hannes Reinecke1-2/+2
Move the check for outstanding commands out of the function allowing us to simplify the overall code. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-01-10scsi: mpt3sas: always use first reserved smid for ioctl passthroughHannes Reinecke1-8/+2
ioctl passthrough commands require a SCSIIO smid, but cannot easily integrate with the block layer. But the driver already has reserved some SCSIIO smids and we're only ever allowing one ioctl command at a time we can use the first reserved smid for ioctl commands. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-05 23:20:06 +0000