summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_scsi.c
AgeCommit message (Collapse)AuthorFilesLines
2018-05-08scsi: lpfc: Comment cleanup regarding Broadcom copyright headerJames Smart1-1/+1
Fix small formatting and wording nits in Broadcom copyright header Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-18scsi: lpfc: Fix Abort request WQ selectionJames Smart1-6/+6
When running loads that generated aborts, io errors where seen. Turns out the abort requests where not placed on the proper WQ resulting in the errors. Closer inspection inspection of this error also showed improper spinlock api use. Correct the WQ selection policy for the abort requests. Correct spin_lock/spin_lock_irq/spin_lock_irqsave usage. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-18scsi: lpfc: Correct target queue depth application changesJames Smart1-14/+5
The max_scsicmpl_time parameter can be used to perform scsi cmd queue depth mgmt based on io completion time: the queue depth is reduced to make completion time shorter. However, as soon as an io completes and the completion time is within limits, the code immediately bumps the queue depth limit back up to the target queue depth. Thus the procedure restarts, effectively limiting the usefulness of adjusting queue depth to help completion time. This patch makes the following changes: - Removes the code at io completion that resets the queue depth as soon as within limits. - As the code removed was where the target queue depth was first applied, change target queue depth application so that it occurs when the parameter is changed. - Makes target queue depth a standard parameter: both a module parameter and a sysfs parameter. - Optimizes the command pending count by using atomics rather than locks. - Updates the debugfs nodelist stats to allow better debugging of pending command counts. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-12scsi: lpfc: Memory allocation error during driver start-up on power8James Smart1-1/+6
The driver fails to allocate command buffers in the routine lpfc_new_scsi_buf_s4 There is an inconsistency between lpfc_mem_alloc(), where the phba->lpfc_sg_dma_buf_pool is created, and lpfc_new_scsi_buf_s4(), when we allocate a buffer from the pool and check the alignment. The alignment should be on a page boundary, based on LPFC_SLI3_BG_ENABLED in sli3_options, for both cases. Fix by explicitly tracking sli4 vs sli3 and BG options. The result is that phba->cfg_sg_dma_buf_size is now set correctly for SLI-4. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-22scsi: lpfc: Add embedded data pointers for enhanced performanceJames Smart1-2/+6
The current driver isn't taking advantage of a performance hint whereby the initial data buffer descriptor can be placed in the WQE as well as the SGL. Add the logic to detect support for the feature and to use it when supported. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-12scsi: lpfc: Update 11.4.0.7 modified files for 2018 CopyrightJames Smart1-1/+1
Updated Copyright in files updated 11.4.0.7 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-12scsi: lpfc: Treat SCSI Write operation Underruns as an errorJames Smart1-5/+3
Currently, write underruns (mismatch of amount transferred vs scsi status and its residual) detected by the adapter are not being flagged as an error. Its expected the target controls the data transfer and would appropriately set the RSP values. Only read underruns are treated as errors. Revise the SCSI error handling to treat write underruns as an error as well. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-02-12scsi: lpfc: Allow set of maximum outstanding SCSI cmd limit for a targetJames Smart1-11/+28
Make the attribute writeable. Remove the ramp up to logic as its unnecessary, simply set depth. Add debug message if depth changed, possibly reducing limit, yet our outstanding count has yet to catch up with it. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-01scsi: lpfc: Convert timers to use timer_setup()Kees Cook1-2/+2
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-07scsi: lpfc: Replace PCI pool old APIRomain Perier1-6/+6
The PCI pool API is deprecated. This commit replaces the PCI pool old API by the appropriate function with the DMA pool API. It also updates some comments, accordingly. Signed-off-by: Romain Perier <romain.perier@collabora.com> Reviewed-by: Peter Senna Tschudin <peter.senna@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-07-11Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+3
Pull more block updates from Jens Axboe: "This is a followup for block changes, that didn't make the initial pull request. It's a bit of a mixed bag, this contains: - A followup pull request from Sagi for NVMe. Outside of fixups for NVMe, it also includes a series for ensuring that we properly quiesce hardware queues when browsing live tags. - Set of integrity fixes from Dmitry (mostly), fixing various issues for folks using DIF/DIX. - Fix for a bug introduced in cciss, with the req init changes. From Christoph. - Fix for a bug in BFQ, from Paolo. - Two followup fixes for lightnvm/pblk from Javier. - Depth fix from Ming for blk-mq-sched. - Also from Ming, performance fix for mtip32xx that was introduced with the dynamic initialization of commands" * 'for-linus' of git://git.kernel.dk/linux-block: (44 commits) block: call bio_uninit in bio_endio nvmet: avoid unneeded assignment of submit_bio return value nvme-pci: add module parameter for io queue depth nvme-pci: compile warnings in nvme_alloc_host_mem() nvmet_fc: Accept variable pad lengths on Create Association LS nvme_fc/nvmet_fc: revise Create Association descriptor length lightnvm: pblk: remove unnecessary checks lightnvm: pblk: control I/O flow also on tear down cciss: initialize struct scsi_req null_blk: fix error flow for shared tags during module_init block: Fix __blkdev_issue_zeroout loop nvme-rdma: unconditionally recycle the request mr nvme: split nvme_uninit_ctrl into stop and uninit virtio_blk: quiesce/unquiesce live IO when entering PM states mtip32xx: quiesce request queues to make sure no submissions are inflight nbd: quiesce request queues to make sure no submissions are inflight nvme: kick requeue list when requeueing a request instead of when starting the queues nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues ...
2017-07-03t10-pi: Move opencoded contants to common headerDmitry Monakhov1-2/+3
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-12scsi: lpfc: Fix counters so outstandng NVME IO count is accurateJames Smart1-5/+14
NVME FC counters don't reflect actual results Since counters are not atomic, or protected by a lock, the values often get screwed up. Make them atomic, like NVMET. Fix up sysfs and debugfs display accordingly Added Outstanding IOs to stats display Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: add transport eh_timed_out referenceJames Smart1-0/+1
Christoph's prior patch missed the template for the sli3 adapters, which is now the "no host reset" template. Add the transport eh_timed_out handler to the no host reset template Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-03-06scsi: lpfc: Fix eh_deadline setting for sli3 adapters.James Smart1-2/+1
A previous change unilaterally removed the hba reset entry point from the sli3 host template. This was done to allow tape devices being used for back up from being removed. Why was this done ? When there was non-responding device on the fabric, the error escalation policy would escalate to the reset handler. When the reset handler was called, it would reset the adapter, dropping link, thus logging out and terminating all i/o's - on any target. If there was a tape device on the same adapter that wasn't in error, it would kill the tape i/o's, effectively killing the tape device state. With the reset point removed, the adapter reset avoided the fabric logout, allowing the other devices to continue to operate unaffected. A hack - yes. Hint: we really need a transport I_T nexus reset callback added to the eh process (in between the SCSI target reset and hba reset points), so a fc logout could occur to the one bad target only and stop the error escalation process. This patch commonizes the approach so it can be used for sli3 and sli4 adapters, but mandates the admin, via module parameter, specifically identify which adapters the resets are to be removed for. Additionally, bus_reset, which sends Target Reset TMFs to all targets, is also removed from the template as it too has the same effect as the adapter reset. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: Update copyrightsJames Smart1-1/+3
Update copyrights to 2017 for all files touched in this patch set Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Initiator: Merge into FC discoveryJames Smart1-1/+2
NVME Initiator: Merge into FC discovery Adds NVME PRLI support and Nameserver registrations and Queries for NVME Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: NVME Initiator: Base modificationsJames Smart1-25/+76
NVME Initiator: Base modifications This patch adds base modifications for NVME initiator support. The base modifications consist of: - Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as rings as well) as implementation now widely varies between the two. - Addition of configuration modes: SCSI initiator only; NVME initiator only; NVME target only; and SCSI and NVME initiator. The configuration mode drives overall adapter configuration, offloads enabled, and resource splits. NVME support is only available on SLI-4 devices and newer fw. - Implements the following based on configuration mode: - Exchange resources are split by protocol; Obviously, if only 1 mode, then no split occurs. Default is 50/50. module attribute allows tuning. - Pools and config parameters are separated per-protocol - Each protocol has it's own set of queues, but share interrupt vectors. SCSI: SLI3 devices have few queues and the original style of queue allocation remains. SLI4 devices piggy back on an "io-channel" concept that eventually needs to merge with scsi-mq/blk-mq support (it is underway). For now, the paradigm continues as it existed prior. io channel allocates N msix and N WQs (N=4 default) and either round robins or uses cpu # modulo N for scheduling. A bunch of module parameters allow the configuration to be tuned. NVME (initiator): Allocates an msix per cpu (or whatever pci_alloc_irq_vectors gets) Allocates a WQ per cpu, and maps the WQs to msix on a WQ # modulo msix vector count basis. Module parameters exist to cap/control the config if desired. - Each protocol has its own buffer and dma pools. I apologize for the size of the patch. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> ---- Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-22scsi: lpfc: minor code cleanupsJames Smart1-1/+2
This contains code cleanups that were in the prior patch set. This allows better review of real changes later. minor code cleanups: fix indentation, punctuation, line length addition/reduction of whitespace remove unneeded parens, braces lpfc_debugfs_nodelist_data: print as u64 rather than byte by byte covert printk(KERN_ERR to pr_err small print string deltas use num_present_cpus() rather than count them comment updates rctl/type names moved to module variable, not on stack Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig1-0/+2
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-05scsi: lpfc: Fix Xlane dynamic LUN set for LUN priority.James Smart1-6/+12
Fix Xlane dynamic LUN set for LUN priority. Dynamic changing of the priority was not getting reflected on the LUN. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30scsi: lpfc: Replace pci_pool_alloc by pci_pool_zallocSouptick Joarder1-5/+2
In lpfc_new_scsi_buf_s3() and lpfc_new_scsi_buf_s4() pci_pool_alloc followed by memset will be replaced by pci_pool_zalloc() Signed-off-by: Souptick joarder <jrdr.linux@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: lpfc: Correct panics with eh_timeout and eh_deadlineJames Smart1-3/+3
Correct panics with eh_timeout and eh_deadline We were having double completions on our SLI-3 version of adapters. Solved by clearing our command pointer before calling scsi_done. The eh paths potentially ran simulatenously and would see the non-null value and invoke scsi_done again. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: lpfc: Fix sg_reset on SCSI device causing kernel crashJames Smart1-9/+13
Fix sg_reset on SCSI device causing kernel crash Driver could reference stale node pointers in task mgmt call. Changed to use resetting cmd and look up node pointer in task mgmt function. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08scsi: lpfc: Fix few small typos in lpfc_scsi.cMilan P. Gandhi1-9/+12
This patch does a cleanup and fixes few small typos in lpfc_scsi.c Signed-off-by: Milan P. Gandhi <mgandhi@redhat.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-27lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()Mauricio Faria de Oliveira1-1/+1
The lpfc_sli4_scmd_to_wqidx_distr() function expects the scsi_cmnd 'lpfc_cmd->pCmd' not to be null, and point to the midlayer command. That's not true in the .eh_(device|target|bus)_reset_handler path, because lpfc_send_taskmgmt() sends commands not from the midlayer, so does not set 'lpfc_cmd->pCmd'. That is true in the .queuecommand path because lpfc_queuecommand() stores the scsi_cmnd from midlayer in lpfc_cmd->pCmd; and lpfc_cmd is stored by lpfc_scsi_prep_cmnd() in piocbq->context1 -- which is passed to lpfc_sli4_scmd_to_wqidx_distr() as lpfc_cmd parameter. This problem can be hit on SCSI EH, and immediately with sg_reset. These 2 test-cases demonstrate the problem/fix with next-20160601. Test-case 1) sg_reset # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffde6d0994 <unfinished ...> +++ killed by SIGSEGV +++ Segmentation fault # dmesg Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd00000001c88442c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 104 PID: 16333 Comm: sg_reset Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d00000001c88442c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d00000001c826fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000003c9ec876f0] [c000003c9ec87770] 0xc000003c9ec87770 (unreliable) [c000003c9ec87720] [d00000001c82e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000003c9ec87780] [d00000001c831a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000003c9ec87880] [d00000001c87f27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000003c9ec87950] [d00000001c87fd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000003c9ec87a10] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000003c9ec87a40] [c0000000006113e8] scsi_ioctl_reset+0x198/0x2c0 [c000003c9ec87bf0] [c00000000060fe5c] scsi_ioctl+0x13c/0x4b0 [c000003c9ec87c80] [c0000000006629b0] sd_ioctl+0xf0/0x120 [c000003c9ec87cd0] [c00000000046e4f8] blkdev_ioctl+0x248/0xb70 [c000003c9ec87d30] [c0000000002a1f60] block_ioctl+0x70/0x90 [c000003c9ec87d50] [c00000000026d334] do_vfs_ioctl+0xc4/0x890 [c000003c9ec87de0] [c00000000026db60] SyS_ioctl+0x60/0xc0 [c000003c9ec87e30] [c000000000009120] system_call+0x38/0x108 Instruction dump: <...> With fix: # strace sg_reset --device /dev/sdm <...> open("/dev/sdm", O_RDWR|O_NONBLOCK) = 3 ioctl(3, SG_SCSI_RESET, 0x3fffe103c554) = 0 close(3) = 0 exit_group(0) = ? +++ exited with 0 +++ # dmesg [ 424.658649] lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (1, 0) return x2002 Test-case 2) SCSI EH Using this debug patch to wire an SCSI EH trigger, for lpfc_scsi_cmd_iocb_cmpl(): - cmd->scsi_done(cmd); + if ((phba->pport ? phba->pport->cfg_log_verbose : phba->cfg_log_verbose) == 0x32100000) + printk(KERN_ALERT "lpfc: skip scsi_done()\n"); + else + cmd->scsi_done(cmd); # echo 0x32100000 > /sys/class/scsi_host/host11/lpfc_log_verbose # dd if=/dev/sdm of=/dev/null iflag=direct & <...> After a while: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xd0000000199e448c Oops: Kernel access of bad area, sig: 11 [#1] <...> CPU: 96 PID: 28556 Comm: scsi_eh_11 Tainted: G W 4.7.0-rc1-next-20160601-00004-g95b89dc #6 <...> NIP [d0000000199e448c] lpfc_sli4_scmd_to_wqidx_distr+0xc/0xd0 [lpfc] LR [d000000019986fe8] lpfc_sli_calc_ring.part.27+0x98/0xd0 [lpfc] Call Trace: [c000000ff0d0b890] [c000000ff0d0b900] 0xc000000ff0d0b900 (unreliable) [c000000ff0d0b8c0] [d00000001998e004] lpfc_sli_issue_iocb+0xd4/0x260 [lpfc] [c000000ff0d0b920] [d000000019991a3c] lpfc_sli_issue_iocb_wait+0x15c/0x5b0 [lpfc] [c000000ff0d0ba20] [d0000000199df27c] lpfc_send_taskmgmt+0x24c/0x650 [lpfc] [c000000ff0d0baf0] [d0000000199dfd7c] lpfc_device_reset_handler+0x10c/0x200 [lpfc] [c000000ff0d0bbb0] [c000000000610694] scsi_try_bus_device_reset+0x44/0xc0 [c000000ff0d0bbe0] [c0000000006126cc] scsi_eh_ready_devs+0x49c/0x9c0 [c000000ff0d0bcb0] [c000000000614160] scsi_error_handler+0x580/0x680 [c000000ff0d0bd80] [c0000000000ae848] kthread+0x108/0x130 [c000000ff0d0be30] [c0000000000094a8] ret_from_kernel_thread+0x5c/0xb4 Instruction dump: <...> With fix: # dmesg lpfc 0006:01:00.4: 4:(0):3053 lpfc_log_verbose changed from 0 (x0) to 839909376 (x32100000) lpfc: skip scsi_done() <...> lpfc 0006:01:00.4: 4:(0):0713 SCSI layer issued Device Reset (0, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0723 SCSI layer issued Target Reset (1, 0) return x2002 <...> lpfc 0006:01:00.4: 4:(0):0714 SCSI layer issued Bus Reset Data: x2002 <...> lpfc 0006:01:00.4: 4:(0):3172 SCSI layer issued Host Reset Data: <...> Fixes: 8b0dff14164d ("lpfc: Add support for using block multi-queue") Cc: <stable@vger.kernel.org> # v4.2+ Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Copyright updatesJames Smart1-1/+1
Copyright updates Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add support for XLane LUN priorityJames Smart1-2/+7
Add support for XLane LUN priority Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-07-15lpfc: Add sysfs proc_name supportJames Smart1-0/+3
Add sysfs proc_name support Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23lpfc: Remove redundant code block in lpfc_scsi_cmd_iocb_cmplJohannes Thumshirn1-17/+0
This removes a redundant code block that will either be executed if the ENABLE_FCP_RING_POLLING flag is set in phba->cfg_poll or not. The code is just duplicated in both cases, hence we unify it again. This probably is a left over from some sort of refactoring. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-21lpfc: Use new FDMI speed definitions for 10G, 25G and 40G FCoE.James Smart1-9/+1
Use new FDMI speed definitions for 10G, 25G and 40G FCoE. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-21lpfc: Make write check error processing more resilientJames Smart1-6/+21
Make write check error processing more resilient. Checks to catch writes that fw reports weren't fully complete yet SCSI status indicated fine needed correction. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-21lpfc: Fix crash in fcp command completion path.James Smart1-2/+2
Fix crash in fcp command completion path. Missed null check. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09scsi: use host wide tags by defaultChristoph Hellwig1-3/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-10-27lpfc: remove set but not used variablesSebastian Herbszt1-13/+1
Remove set but not used variables. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13lpfc: Fix scsi task management error message.James Smart1-8/+10
TMF's were getting error messages on FCP_RSP errors (underrun). Underruns aren't meaningful in the scenario. Change the error message to filter out these response check errors, and don't unconditionally mark the cmd as in error. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13lpfc: Fix scsi prep dma buf error.James Smart1-1/+1
Didn't check for less-than-or-equal zero. Means we may later call scsi_dma_unmap() even though we don't have valid mappings. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13lpfc: Add support for using block multi-queueJames Smart1-0/+43
With blk-mq support in the mid-layer, lpfc can do IO steering based on the information in the request tag. This patch allows lpfc to use blk-mq if enabled. If not enabled, we fall back into the emulex-internal affinity mappings. This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing scsi_mod.use_blk_mq=Y as a parameter to the kernel. Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-05lpfc: Change buffer pool empty message to miscellaneous categoryJames Smart1-1/+1
Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-11lpfc: Fix breakage on big endian kernelsAlexey Kardashevskiy1-20/+21
This reverts 4fbdf9cb it breaks LPFC on POWER7 machine, big endian kernel. Without this, the kernel enters an infinite oops loop. This is the hardware used for verification: 0005:01:00.0 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) 0005:01:00.1 Fibre Channel [0c04]: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter [10df:f100] (rev 03) Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Update copyright to 2015James Smart1-1/+1
Update copyright to 2015 Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix for lun discovery issue with saturn adapter.James Smart1-21/+20
FCP_CMD payload was not always properly initialized on SLI-3 devices. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix crash in device reset handler.James Smart1-2/+3
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix null ndlp dereference in target_reset_handlerJames Smart1-4/+6
Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10lpfc: Fix host reset escalation killing all IOs.James Smart1-0/+25
Fix host reset escalation killing all IOs. SLI-3 adapters will use a new host template. The template differs from SLI-4 adapters in that it does not have an eh_host_reset_handler. Lpfc has traditionally never had a host_reset. The host reset handler was added when we ran into a stuck hardware condition on a SLI-4 adapter. The host_reset will reset and reinit the pci function, clearing the hardware condition. Unfortunately, the host reset handler uses attach/detach code paths, which makes scsi_add_host() and scsi_remove_host() calls. Meaning, a host_reset will completely remove the scsi_host from the system. As a new call to scsi_add_host() is made, the shost# changes, which results in completely new scsi_devices and device names. All the older scsi devices on the old shost# are now orphaned and unrecoverable. We realize we need to re-implement the host_reset_handler so the scsi_host stays registered across the host_reset, but that will be a rather lengthy effort. In the short term, we had an immediate need to restore the SLI-3 devices to their working behavior, with the easiest path being to remove their host_reset handler. Signed-off-by: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-12-04scsi: remove ->change_queue_type methodChristoph Hellwig1-2/+0
Since we got rid of ordered tag support in 2010 the prime use case of switching on and off ordered tags has been obsolete. The other function of enabling/disabling tagging entirely has only been correctly implemented by the 53c700 driver and isn't generally useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig1-22/+4
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-24scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig1-20/+3
All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
2014-11-24lpfc: remove queue_depth eventsChristoph Hellwig1-66/+0
James Smart said the userspace to consume these events never emerged. Given that these get in the way of the following patches remove support for them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: James Smart <james.smart@emulex.com>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-2/+2
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-03-01 05:08:41 +0000