summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_hw4.h
AgeCommit message (Collapse)AuthorFilesLines
2014-06-02lpfc: Update Copyright on changed files from 8.3.45 patchesJames Smart1-1/+1
Update Copyright on changed files from 8.3.45 patches Missed this in the 8.3.45 push Signed-off-by: James Smart <james.smart@emulex.com> Reviewed-By: Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] lpfc 8.3.45: Incorporated support of a low-latency io pathJames Smart1-0/+6
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed invalid Total_Data_Placed value received for els ↵James Smart1-2/+4
and ct command responses Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] lpfc 8.3.43: Fixed invalid fcp_rsp length fir FCP_ICMNDJames Smart1-3/+21
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Fixed support for 128 byte WQEsJames Smart1-0/+13
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-26[SCSI] lpfc 8.3.40: Update Copyrights to 2013 for 8.3.38, 8.3.39, and 8.3.40 ↵James Smart1-1/+1
modifications Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] lpfc 8.3.39: Fixed driver vector mapping to CPU affinityJames Smart1-0/+5
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] lpfc 8.3.39: Fix driver issues with SCSI Host resetJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-09[SCSI] lpfc 8.3.38: Fixed degraded performance after cable pullsJames Smart1-0/+3
The service parameters for the VPI/RPIs were incorrect, resulting in lower utilization Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operationJames Smart1-69/+107
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] lpfc 8.3.36: Update DIF support for passthru/strip/insertJames Smart1-0/+3
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-08[SCSI] lpfc 8.3.35: Fixed not reporting logical link speed to SCSI midlayer ↵James Smart1-0/+12
when QoS not on Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-10-08[SCSI] lpfc 8.3.35: Fixed not checking solicition in progress bit when ↵James Smart1-1/+7
verifying FCF record for use Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.34: Fix parameter field in CQE to mask for LOCAL_REJECT statusJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.34: Add SLI-4 V1 Capacity and Resource Descriptor supportJames Smart1-1/+16
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: Fixed incomplete list of SLI4 commands with extended ↵James Smart1-0/+6
timeout value Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: Make I/O to hw queue distribution algorithm a module ↵James Smart1-0/+4
parameter Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: Allow per-hba interrupt rate tuningJames Smart1-3/+5
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.33: When doing loopback testing, set the diag valid bitJames Smart1-0/+5
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] lpfc 8.3.32: Fix error reporting of misconfigured portsJames Smart1-0/+23
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-20[SCSI] lpfc 8.3.32: Fix ability to change FCP EQ delay multiplierJames Smart1-0/+22
Fix fcp_imax module parameter to dynamically change FCP EQ delay multiplier Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct point-to-point mode discovery errors on LPe16xxxJames Smart1-1/+7
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-17[SCSI] lpfc 8.3.31: Correct handling of SLI4-port XRI resource-provisioning ↵James Smart1-7/+3
profile change Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Update copyright date for files modified in 2012James Smart1-1/+1
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-03-27[SCSI] lpfc 8.3.30: Fix driver handling of XRI Aborted CQE responseJames Smart1-0/+6
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: T10 Diff fixes and enhancementsJames Smart1-2/+21
T10 Diff fixes and enhancements: - Add SLI4 Lancer support for T10 DIF / BlockGuard (121980) - Fix SLI4 BlockGuard behavior when protection data is generated by HBA (121980) - Enhance debugfs for injecting T10 DIF errors (123966, 132966) - Fix Incorrect usage of bghm for BlockGuard errors (127022) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] lpfc 8.3.29: SLI related fixesJames Smart1-7/+19
SLI related fixes: - Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230) - Fix ELS FDISC failing with local reject / invalid RPI. (126350) - Fix reset port when reset is needed during fw_dump (125807) - Fix unbounded firmware revision string from port cause panic (126560) - Fix driver behavior when receiving an ADISC (126654) - Fix driver not returning when bad ndlp found in abts error event handling (126209) - Add more driver logs in area of SLI4 port error attention and reset recovery (126813, 124466) - Fix failure in handling large CQ/EQ identifiers in an IOV environment (126856) - Fix for driver using duplicate RPIs after lancer port reset (126723) - Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a zero SID (126779, 126897) - Fix for SLI4 Port delivery for BLS ABORT ACC (126289) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Add Loopback support for SLI4 adaptersJames Smart1-2/+5
- Add Basic support for SLI4 Loopback. (CR 124951, 125766, 124951, 125843, 125832, 125843) - Added missing protection in setting/clearing of phba->link_flag bit field (CR 125994) - Use link type and link number obtained from READ_CONFIG mailbox command. (CR 126264) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] Lpfc 8.3.28: FC and SCSI Discovery FixesJames Smart1-0/+2
FC and SCSI Discovery Fixes: - Clear the virtual fabrics bit (word 1 bit 30) when sending the FLOGI and FDISC. (CR 124339) - Return a MLQUEUE_DEVICE_BUSY if the driver detects that an I/O is being retried too quickly (CR 124668) - Remove NDLP reference put in lpfc_cmpl_els_logo_acc for all but fabric nodes (CR 123924) - Only retry FDISCs every second and stop retrying after devloss number of retries (CR 13939) - Check to see if vports are unloading before adding them to the vport work array. (CR 124996) - Fixed illegal state transition during driver unload (CR 124191) - Added missing protection on setting/clearing of vport->fc_flag bit (CR 126002) - Set NPIV flag in lpfc_mbx_process_link_up for all ports sli3 and above. (CR 126094) - Clear FCP command bytes that are not used. (CR 126209) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-12-15[SCSI] lpfc 8.3.28: Miscellaneous fixes in sysfs and mgmt interfacesJames Smart1-0/+2
Miscellaneous fixes in sysfs and mgmt interfaces: - Added SLI4 INTF_TYPE and SLI_FAMILY as sub-field to the fwrev sysfs attribute (CR 124103) - Added a sysfs attribute "protocol" to report SLI4 port link protocol type (CR 124102) - Increment mix-and-match minor number by 1 for added "protocol" sysfs attribute. (124102) - Move the link speed check into the generic sli3/sli4 code path. (CR 124185, 124122) - Deleted check for inExtWLen (CR 122523) - Add the word "offline" to message 2889 (CR 124385) - Conditionalize the firmware upgrade/downgrade so that it is only attempted for SLI4 type 2 boards (CR 124406) - Return an error if the mbox sysfs is called. (CR 124210) - When port_state is less than LPFC_VPORT_READY, report FC_PORTSTATE_BYPASSED (CR 120018) - Added driver support for performing persistent linkdown based on configure region 23 (CR 124534) - Added restore state and error log when sysfs board_mode attribute access failed (CR 124158) - Added support for SLI4_CONFIG non-embedded COMN_GET_CNTL_ADDL_ATTR pass-through (CR 124466) - Rejecting un-supported multi-buffer mailbox commands (CR 124771) - Byte swap the extended data request and response data for extended mailbox data (CR 125081) Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: T10 additions for SLI4James Smart1-4/+84
Added T10 DIFF error injection code. Added T10 DIFF structure definitions for SLI4 devices. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Change algorithm for getting physical port nameJames Smart1-2/+159
Implemented new algorithm for getting physical port name for all SLI4 devices Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Changed worst case mailbox timeoutJames Smart1-19/+29
Changed the timeout value for flash-based SLI_CONFIG (0x9B) mailbox command to 300 seconds for worst case flash delays. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-10-16[SCSI] lpfc 8.3.27: Miscellanous logic and interface fixesJames Smart1-1/+0
Miscellanous logic and interface fixes - Fix lpfc_init_vfi_cmpl to check the interface type for interface type 0 before parsing the results. - Cast uint32_t values that are multiplied to uint64_t before the multiplication. - Instead of "break" statement when PCI read returned error, use the goto statement to the end of the routine after setting return value - moved the msleep(10) to the beginning of the wait loop for checking the SLIPort_Status register - Added the code to follow the existing wait for SLIPort_Status register RDY, ERR, and RN bits to be set by the port before proceeding to perform PCI function reset. - Do not override ulpCt_h and ulpCt_l for SLI 4 ports. - For vport delete, call lpfc_nlp_put when the vport's vpi state is not marked with VPI_REGISTERED. - Added missed fields into the driver's Controller Attributes Structure - Changed ringing EQ/CQ/RQ doorbell register to be dependent on the size of the queue. - Return -EACCES in issue_reset if cfg_enable_hba_reset is zero. - Added new logging flag LOG_FCP_UNDER 0x00040000 to qualify underrun logging. - Add a check in the fabric name display routine to display 0 if the port state is <= FLOGI. - Add a check to the switch statement in lpfc_decode_firmware_rev to check for an 'X'. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-08-29[SCSI] lpfc 8.3.26: Fix HBA initialization issuesJames Smart1-0/+2
Fix HBA initialization issues - Swap all values that come from the firmware image on little endian systems. Created a new bf_get_be macro that does the same as the bf_get_le macro but for big endian data instead of little endian data. - Moved the incrementing of temp_offset after the copy fixed the write object loop to use temp_offset to figure out where the end of the image is instead of offset. - Added the necessary codes for properly bringing the driver instance offline and then trying to bring the port back online with the PCI function IP reset. If it fails to bring the SLI port back online, it will fall through to bringing the SLI port to HBA error offline. - Add a call in the probe_one_s3 and probe_one_s4 routines to get the Modeldesc - Change OCe50100 to OCe15100 - Made the error log also include the PCI BAR bitmap returned from kernel call pci_select_bars(). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Adapter Interface fixes and changesJames Smart1-1/+8
Adapter Interface fixes and changes - Modify the macro field from lpfc_init_vpi_vpi to lpfc_init_vfi_vpi - Add the new CQE_CODE_RECEIVE_V1 CQE Code, add code in the driver to handle the new Code the same as the CQE_CODE_RECEIVE code except that there are two new checks for this code that will cause the driver to use the new V1 macros for rq_id and fcf_id. - Fix a bug in lpfc_prep_seq() where the size out of the first CQE was ONLY being used, even though multiple dmabufs make up the sequence, each have their own CQE with potentially different sizes. - Fix bug in lpfc_bsg_ct_unsol_event() where the ulpContext and ulpWord[3] fields of the XMIT_SEQUENCE64_CX IOCB were being calculated incorrectly. - Do physical to logical translation before indexing into the active XRI array. - Populate physical vpi in the iocb data structure. - Put the current accumulated total in each IOCB in the chain as we are walking thru then. The last IOCB in the chain should have the total length of the sequence. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-07-27[SCSI] lpfc 8.3.25: Miscellaneous Bug fixes and code cleanupJames Smart1-13/+8
Miscellaneous Bug fixes and code cleanup - Fix 16G link speed reporting by adding check for 16G check. - Change the check and enforcement of MAILBOX_EXT_SIZE (2048B) to the check and enforcement of BSG_MBOX_SIZE - sizeof(MAILBOX_t) (3840B). - Instead of waiting for a fixed amount of time after performing firmware reset, the driver shall wait for the Lancer SLIPORT_STATUS register for the readiness of the firmware for bring up. - Add logging to indicate when dynamic parameters are changed. - Add revision and date to the firmware image format. - Use revision instead of rev_name to check firmware image version. - Update temporary offset after memcopy is complete for firmware update. - Consolidated the use of the macros to get rid of duplicated register offset definitions. - Removed the unused second parameter in routine lpfc_bsg_diag_mode_enter() - Enable debugfs when debugfs is enabled. - Update function comments for lpfc_sli4_alloc_xri and lpfc_sli4_init_rpi_hdrs. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnosticsJames Smart1-0/+82
Extend BSG infrastructure and add link diagnostics: - Removed unnecessary copies in handling pass-through mbox cmds. - Add embedded SLI_CONFIG support for BSG. - Add multibuffer support. - Implemented the setting up and tearing down Lancer FC device for performing internal and external loopback diagnostic tests. - Implemented the driver support for performing new link diagnostic tests Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add resource extent supportJames Smart1-47/+158
This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add request-firmware supportJames Smart1-0/+44
Add request-firmware support: - Add support for request_firmware interface for INTF2 SLI4 ports. - Add ability to reset SLI4 INTF2 ports. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Add SR-IOV controlJames Smart1-0/+149
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Extended hardware support and support dump imagesJames Smart1-0/+19
Extended hardware support and support dump images: - Make the size to be MAILBOX_SYSFS_MAX (4096) so that it allows the maximum sysfs binary access interface possible. - Add ids and model names for new hardware - Add capability of inducing SLI4 firmware dump obj file Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-26[SCSI] lpfc 8.3.24: Miscellaneous Fixes and CorrectionsJames Smart1-1/+1
Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-01[SCSI] lpfc 8.3.23: Fixes related to new hardwareJames Smart1-1/+13
Fixes related to new hardware - Restrict driver to look at BAR2 or BAR4 only for if_type 0. - Allow SLI4 with FCOE_MODE not set for new SLI4 FC adapters. - Add Temporary RPI field to the ELS request WQE. - Do not override CT field in issue_els_flogi for SLI4 IF type 2 - For RQ_CREATE_V2 mbx cmd: fill in the rqe_size and page_size for RQ_CREATE. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-05-01[SCSI] lpfc 8.3.23: Miscellaneous fixesJames Smart1-1/+3
Miscellaneous fixes - Do not limit RPI Count to a minimum of 64 - Fix FCFI incorrect on received unsolicited frames. - Save the FCFI returned in the REG_FCFI mailbox command if it was successful. - Fixed Vports not sending FDISC after lips. - Align based on the SLI4_PAGE_SIZE. - Fixed double byte swap on received RRQ. - Fixed mask size for the wq_id mask from 0x7F to 0x7FFF. - Clear FC_FABRIC flag when NPIV LOGO completes (and add a log message). - Modified driver to skip round robin only when ulpStatus==LOCAL_REJECT and word4=SEQUENCE_TIMEOUT to prevent FLOGI to disconnected FCF. - Don't add rport if driver unloading Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] lpfc 8.3.22: FC Discovery fixesJames Smart1-1/+11
FC Discovery fixes - In lpfc_sli4_bpl2sgl byte swapping the SGL in word2. - In lpfc_sli4_iocb2wqe byteswap the data for CMD_GEN_REQUEST64_CR type WQE. - In lpfc_sli4_seq_abort_acc do not set the oxid into the iocb's xritag field. - In lpfc_sli4_seq_abort_acc check the return value of lpfc_sli_issue_iocb. - Inprove messages in this area. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-23[SCSI] lpfc 8.3.22: Add new mailbox command and new BSG fixJames Smart1-30/+71
- Add new Queue Create Mailbox version support - Make lpfc_bsg_wake_mbox_wait routine check the mailboxes job reference before using it. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-18[SCSI] lpfc 8.3.21: Critical Errors and Bug FixesJames Smart1-4/+100
Critical Errors: - Correctly handle non-zero return lpfc_workq_post_event and return ENOMEM - Save the irq level when locking the host_lock in lpfc_findnode_did Bug Fixes: - Adjust payload_length and request_length for sli4_config mailbox commands. - Add the freed sgl/XRI to the tail of the list rather than to the head. - Set the FC_VPORT_NEEDS_INIT_VPI on vport deletes and check it before issuing a fdisc on an els retry. - Only call lpfc_hba_init_link() if phba->cfg_suppress_link_up is LPFC_INITIALIZE_LINK. - Add support for SLI-4 Performance Hints Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] lpfc 8.3.20: Implement new SLI4 init procedures based on if_typeJames Smart1-66/+42
Implement new SLI4 init procedures based on if_type: - Add structure changes for new SLIPORT registers and BAR changes. - Update register names to be consistent with inteface spec terms. - Added union to encapsulate Hardward error registers. - Rework lpfc_sli4_post_status_check() around SLI-4's SLI_INTF type - Removed the lpfc_sli4_fw_cfg_check routine - Segmented driver logic to include evaluation of the if_type to engage different behaviors. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] lpfc 8.3.20: Implement the FC and SLI async event handlersJames Smart1-27/+102
Implement the FC and SLI async event handlers: - Updated MQ_CREATE_EXT mailbox structure to include fc and SLI async events. - Added the SLI trailer code. - Split physical field into type and number to reflect latest SLI spec. - Changed lpfc_acqe_fcoe to lpfc_acqe_fip to reflect latest Spec changes. - Added lpfc_acqe_fc_la structure for FC link attention async events. - Added lpfc_acqe_sli structure for sli async events. - Added lpfc_sli4_async_fc_evt routine to handle fc la async events. - Added lpfc_sli4_async_sli routine to handle sli async events. - Moved LPFC_TRAILER_CODE_FC to be handled by its own handler function. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 10:58:04 +0000