summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/lpfc/lpfc_disc.h
AgeCommit message (Collapse)AuthorFilesLines
2014-03-15[SCSI] lpfc 8.3.44: Fix kernel panics from corrupted ndlp listJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Update copyrights for 8.3.41 modificationsJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] lpfc 8.3.41: Add first burst support to driverJames Smart1-0/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] lpfc 8.3.34: Add LOGO support after ABTS complianceJames Smart1-4/+6
Make compliant with FC specs by sending LOGO after ABTS timeouts Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2010-12-21[SCSI] lpfc 8.3.20: Updates to FC discovery commandsJames Smart1-1/+1
Updated commands used for ELS to utilize VPI Allocate RPI at node creation time and pass in ELS commnads. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-21[SCSI] lpfc 8.3.19: Added support for ELS RRQ commandJames Smart1-0/+17
Added support for ELS RRQ command - Add new routine lpfc_set_rrq_active() to track XRI qualifier state. - Add new module parameter lpfc_enable_rrq to control RRQ operation. - Add logic to ELS RRQ completion handler and xri qualifier timeout to clear XRI qualifier state. - Use OX_ID from XRI_ABORTED_CQE for RRQ payload. - Tie abort and XRI_ABORTED_CQE andler to RRQ generation. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-27[SCSI] lpfc 8.3.13: FC Discovery Fixes and enhancements.James Smart1-0/+2
- Retry PLOGI up to 48 times when LS_RJT reason is "Unable to supply requested data." - When dev loss timeout occures do not change state if there is an outstanding REG_LOGIN. - Add logic to ignore REG_LOGIN completion if discovery is restarted while waiting for REG_LOGIN. - Only change state on REG_LOGIN completion if still in state waiting for REG_LOGIN completion. - Only send ADISCs to FCP-2 Targets (not Initiators). Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] lpfc 8.3.12: Fix discovery issuesJames Smart1-0/+1
- Add code to prevent unreg_vpi mailbox command from failing. - Add code to reset the HBA if unreg_vpi mailbox fails with busy status. - Remove code that was clearing the nlp_type stored during rport discovery. Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] lpfc 8.3.6 : FC Protocol FixesJames Smart1-2/+0
FC protocol fixes. - Fix send sequence logic to handle multi SGL IOCBs. - Fix FDISC completion always setting VPORT state to failed. - Ported the fix on reporting of max_vpi to uppper layer. - Fix incorrect number of Vports allowed to be created. - Fixed Dead FCoE port after creating vports. - Added handling of ELS request for Reinstate Recovery Qualifier (RRQ) - Handle unsolicited CT exchange initiator receiving CT exchange ABTS - Migrate LUN queue depth ramp up code to scsi mid-layer. - Made ABTS WQE go to the same WQ as the WQE to be aborted. - Fix Vport does not rediscover after FCF goes away. - Fixed lpfc_unreg_vfi failure after devloss timeout. - Fixed RPI bit leak. - Fix hbq pointer corruption during target discovery. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and ↵James Smart1-1/+1
update logging This patch include the following fixes and changes: - Fix crash when "error" is echoed to board_mode sysfs parameter - Fix FCoE Parameter parsing in regions 23 - Fix driver crash when creating vport with large number of targets on SLI4 - Fix bug with npiv message being logged when it is not supported by the adapter - Fix a potential dereferencing mailbox structure after free bug - Fix firmware crash after vport create with high target count - Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs - Fix Block guard logging - Fix a memory corruption issue during GID_FT IO prep - Fix crash while processing unsolicited FC frames - Fix failed to allocate XRI message is not a critical failure - Update and fix formatting in some log messages - Fix missing new line characters in log messages - Removed the use of the locally defined FC transport layer related macros - Check the rsplen in lpfc_handle_fcp_err function before using rsplen Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-06-08[SCSI] lpfc 8.3.2 : Miscellaneous ChangesJames Smart1-0/+1
Miscellaneous Changes: - Convert from SLI2_ACTIVE flag to more correct SLI_ACTIVE (generic) flag - Reposition log verbose messaging definitions - Update naming for vpi object name from vport slang name - Handle deferred error attention condition - Add 10G link support - Small bug fixup Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-04-27[SCSI] lpfc 8.3.1: misc fixes/changesJames Smart1-0/+1
8.3.1 Fixes/Changes : - Fix incorrect byte-swapping on word 4 of IOCB (data length) which caused LUNs to not be discovered on big-endian (e.g. PPC) - Remove a bad cast of MBslimaddr which loses the __iomem (sparse) - Make lpfc_debugfs_mask_disc_trc static (sparse) - Correct misspelled word BlockGuard in lpfc_logmsg.h comment - Replaced repeated code segment for canceling IOCBs from a list with a function call, lpfc_sli_cancel_iocbs(). - Increased HBQ buffers to support 40KB SSC sequences. - Added sysfs interface to update speed and topology parameter without link bounce. - Fixed bug with sysfs fc_host WWNs not being updated after changing the WWNs. - Check if the active mailbox is NULL in the beginning of the mailbox timeout handler - fixes panic in the mailbox timeout handler while running IO stress test - Fixed system panic in lpfc_pci_remove_one() due to ndlp indirect reference to phba through vport - Removed de-reference of scsi device after call to scsi_done() to fix panic in scsi completion path while accessing scsi device after scsi_done is called. - Fixed "Nodelist not empty" message when unloading the driver after target reboot test - Added LP2105 HBA model description - Added code to print all 16 words of unrecognized ASYNC events - Fixed memory leak in vport create + delete loop - Added support for handling dual error bit from HBA - Fixed a driver NULL pointer dereference in lpfc_sli_process_sol_iocb - Fixed a discovery bug with FC switch reboot in lpfc_setup_disc_node - Take NULL termintator into account when calculating available buffer space Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc ↵James Smart1-0/+20
vendor events Added support for new sysfs attributes: lpfc_stat_data_ctrl and lpfc_max_scsicmpl_time. The attributes control statistical reporting of io load. Added support for new fc vendor events for error reporting. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handlingJames Smart1-0/+3
Added new sysfs attribute lpfc_max_scsicmpl_time. Attribute, when enabled, will control target queue depth based on I/O completion time. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Miscellaneous discovery FixesJames Smart1-16/+17
Miscellaneous discovery fixes: - Flush RSCN buffers on vports when reseting HBA. - Fix incorrect FLOGI after vport reg failed - Fix a potential fabric ELS race condition - Fix handling of failed PLOGI command under high lip rates - Fix FDISC handling - Fix debug logging for npiv handling Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] lpfc 8.2.5 : Correct ndlp referencing issuesJames Smart1-1/+32
Correct ndlp referencing issues: - Fix ndlp kref issues due to race conditions between threads - Fix cancel els delay retry event which missed an ndlp reference count Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 2James Smart1-0/+1
Miscellaneous Small Fixes - part 2 - Fix ndlp left in PLOGI state after link up - Fix cannot rcv unsol ELS frames after running HBA resets for a few minutes - Fix HBQ buffer_count implemention - Fix RPI leak - Fix crash while deleting vports while HBA is reset - Revert the FCP Fbits offset back to 7 - Fix panic when deleting vports - Remove unused code in switch statement outside of a case - Reject PLOGI from invalid PName or NName of 0 - Ignore PLOGI responses from WWPName or WWNName of 0 - Fix debugfs hbqinfo display for ppc - Added 8G to list of supported speeds for sysfs parameter - Defer ndlp cleanup to dev-loss timeout handler - Added support for WRITE_VPARMS mailbox command by applications Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : FC Discovery FixesJames Smart1-1/+0
FC Discovery Fixes: - Fix up lpfc_drop_node() vs lpfc_nlp_not_used() usage - Clear ADISC flag when unregistering RPI and REMOVE ndlps if in recovery. - Fix usage of UNUSED list and ndlps - Fix PLOGI race conditions - Reset link if NameServer PLOGI errors occur - Synchronize GID_FT queries with PLOGI receptions Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] lpfc 8.2.3 : Miscellaneous Small Fixes - part 1James Smart1-1/+1
Miscellaneous Small Fixes - part 1 - Fix typo kmzlloc -> kzalloc - Fix discovery ndlp use after free panic - Fix link event causing flood of 0108 messages - Relieve some mbox congestion on link up with 100 vports - Fix broken vport parameters - Prevent lock recursion in logo_reglogin_issue - Split uses of error variable in lpfc_pci_probe_one into retval and error - Remove completion code related to dev_loss_tmo - Remove unused LPFC_MAX_HBQ #define - Don't compare pointers to 0 for sparse - Make 2 functions static for sparse - Fix default rpi cleanup code causing rogue ndlps to remain on the NPR list - Remove annoying ELS messages when driver is unloaded - Fix Cannot issue Register Fabric login problems on link up - Remove LPFC_EVT_DEV_LOSS_DELAY - Fix FC port swap test leads to device going offline - Fix vport CT flags to only be set when accepted - Add code to handle signals during vport_create - Fix too many retries in FC-AL mode - Pull lpfc_port_link_failure out of lpfc_linkdown_port Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-06-17[SCSI] lpfc: bug fixesJames Smart1-1/+2
Following the NPIV support, the following changes have been accumulated in the testing and qualification of the driver: - Fix affinity of ELS ring to slow/deferred event processing - Fix Ring attention masks - Defer dev_loss_tmo timeout handling to worker thread - Consolidate link down error classification for better error checking - Remove unused/deprecated nlp_initiator_tmr timer - Fix for async scan - move adapter init code back into pci_probe_one context. Fix async scan interfaces. - Expand validation of ability to create vports - Extract VPI resource cnt from firmware - Tuning of Login/Reject policies to better deal with overwhelmned targets - Misc ELS and discovery fixes - Export the npiv_enable attribute to sysfs - Mailbox handling fix - Add debugfs support - A few other small misc fixes: - wrong return values, double-frees, bad locking - Added adapter failure heartbeat Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3James Smart1-2/+6
NPIV support is added to the driver. It utilizes the interfaces of the fc transport for the creation and deletion of vports. Within the driver, a new Scsi_Host is created for each NPIV instance, and is paired with a new instance of a FC port. This allows N FC Port elements to share a single Adapter. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] lpfc: NPIV: split portsJames Smart1-3/+3
The driver is reorganized to separate the handling of the adapter from the handling of the FC port. Adapter handling includes submissions of command requests, receiving responses, and managing adapter resources. The FC port includes the discovery engine, login handling, and the mapping of a Scsi_Host on the "port". Although not a large functional change, as it touches core structures and functions, resulting in a large text delta. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Update copyright year to 2007James Smart1-1/+1
Update copyright year to 2007 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Collapse discovery lists to a single node listJames Smart1-20/+0
Collapse discovery lists to a single node list. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reference count node structures for node lifetime ↵James Smart1-2/+1
management Reference count node structures for node lifetime management. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Reorganize lpfc_nlp_list() and callers to prepare for ↵James Smart1-2/+0
nodelist simplification Reorganize lpfc_nlp_list() and callers to prepare for nodelist simplification. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06[SCSI] lpfc 8.1.12 : Rework offline path to solve HBA reset issuesJames Smart1-0/+1
Rework offline path to solve HBA reset issues Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Add support for dev_loss_tmo_callbk and ↵James Smart1-5/+1
fast_io_fail_tmo_callbk Add support for new dev_loss_tmo callback Goodness is that it removes code for a parallel nodev timer that existed in the driver Add support for the new fast_io_fail callback Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-19[SCSI] lpfc 8.1.5 : Fix Discovery processing for NPorts that hit nodev_tmo ↵James Smart1-0/+1
during discovery Fix Discovery processing for NPorts that hit nodev_tmo during discovery Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Added support for FANJamie Wellnitz1-0/+1
Added support for FAN Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz1-6/+12
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Added code to adjust lun queue depth to avoid target ↵James.Smart@Emulex.Com1-0/+2
overloading Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Remove RPI hash from the driverJames.Smart@Emulex.Com1-1/+0
Table was not providing a lot of value and injected a couple of errors. Removed it and made functionality inline. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Update copyright noticesJames.Smart@Emulex.Com1-13/+13
Update copyright notice text and include year 2005. Add Copyright notice for Christoph Hellwig to several files: lpfc.h lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Remove $Id$ keyword strings.James.Smart@Emulex.Com1-4/+0
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18lpfc: add Emulex FC driver version 8.0.281-0/+206
From: James.Smart@Emulex.Com Modified for kernel import and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 00:14:20 +0000