summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/constants.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-16scsi: fix upper bounds check of sense key in scsi_sense_key_string()Tyrel Datwyler1-2/+3
Commit 655ee63cf371 ("scsi constants: command, sense key + additional sense string") added a "Completed" sense string with key 0xF to snstext[], but failed to updated the upper bounds check of the sense key in scsi_sense_key_string(). Fixes: 655ee63cf371 ("[SCSI] scsi constants: command, sense key + additional sense strings") Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi: reduce CONFIG_SCSI_CONSTANTS=y impact by 8kRasmus Villemoes1-5/+21
On 64 bit, struct error_info has 6 bytes of padding, which amounts to over 4k of wasted space in the additional[] array. We could easily get rid of that by instead using separate arrays for the codes and the pointers. However, we can do even better than that and save an additional 6 bytes per entry: In the table, just store the sizeof() the corresponding string literal. The cumulative sum of these is then the appropriate offset into additional_text, which is built from the concatenation (with '\0's inbetween) of the strings. $ scripts/bloat-o-meter /tmp/vmlinux vmlinux add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-8488 (-8464) function old new delta scsi_extd_sense_format 136 160 +24 additional 11312 2824 -8488 The Kconfig help text used to say that CONFIG_SCSI_CONSTANTS=y costs around 75 KB, but that was a little exaggerated. The actual number was closer to 44K, and 36K with this patch. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi: move Additional Sense Codes to separate fileRasmus Villemoes1-827/+3
This is a purely mechanical move of the list of additional sense codes to a separate file, in preparation for reducing the impact of choosing CONFIG_SCSI_CONSTANTS=y by about 8k. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-11scsi: make some Additional Sense strings more grep'ableRasmus Villemoes1-18/+9
There's little point in breaking these strings over multiple lines. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-01-09scsi: Conditionally compile in constants.cHannes Reinecke1-44/+0
Instead of having constants.c littered with ifdef statements we should be moving dummy functions into the header and condintionally compile in constants.c if selected. And update the Kconfig description to reflect the actual size difference. Suggested-by: Christoph Hellwig <hch@infradead.org> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi: use per-cpu buffer for formatting scsi_print_result()Hannes Reinecke1-22/+0
Convert scsi_print_result() to use the per-cpu buffer for decoding the command result and disposition. Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi: use per-cpu buffer for formatting senseHannes Reinecke1-107/+0
Convert sense buffer logging to use the per-cpu buffer to avoid line breakup. Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi: use external buffer for command loggingHannes Reinecke1-72/+2
Use an external buffer for __scsi_print_command() and move command logging over to use the per-cpu logging buffer. With that we can guarantee the command always will always be formatted in one line. So we can even print out a variable length command correctly across several lines. Finally rename __scsi_print_command() to __scsi_format_comment() to better reflect the functionality. Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-01-09scsi: asc/ascq codes, sync to T10 2014/12/21Douglas Gilbert1-1/+27
The last time these SCSI asc/ascq codes were synced with T10 was 2013/06/05. Sync the SCSI ASC/ASCQ number to string tables with those found at http://www.t10.org/lists/asc-num.txt dated 2014/12/21. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-12-02scsi: set fmt to NULL scsi_extd_sense_format() by defaultDan Carpenter1-0/+3
One of the two callers passes an unintialized pointer as "fmt" and expects it to be set to NULL if there is no format string. Let's make this function work as expected. Fixes: d811b848ebb7 ('scsi: use sdev as argument for sense code printing') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: add SPC-3 command definitionsHannes Reinecke1-4/+0
SPC-3 defines SERVICE ACTION IN(12), SERVICE_ACTION OUT(12), SERVICE ACTION OUT(16), and SERVICE ACTION BIDIRECTIONAL. And READ MEDIA SERIAL NUMBER has long since been deprecated. So update callers to refer to the new cdb name. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16Hannes Reinecke1-1/+0
SPC-3 defines SERVICE ACTION IN(12) and SERVICE ACTION IN(16). So rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to be consistent with SPC and to allow for better distinction. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Robert Elliott <elliott@hp.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: simplify scsi_log_(send|completion)Hannes Reinecke1-3/+38
Simplify scsi_log_(send|completion) by externalizing scsi_mlreturn_string() and always print the command address. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_show_result()Hannes Reinecke1-16/+0
Open-code scsi_print_result in sd.c, and cleanup logging to not print duplicate informations. Also remove the call to scsi_show_result() in ufshcd.c to be consistent with other callers of scsi_execute(). With that we can remove scsi_show_result in constants.c Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: separate out scsi_(host|driver)byte_string()Hannes Reinecke1-14/+44
Export functions for later use. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: repurpose the last argument from print_opcode_name()Hannes Reinecke1-15/+10
print_opcode_name() was only ever called with a '0' argument from LLDDs and ULDs which were _not_ supporting variable length CDBs, so the 'if' clause was never triggered. Instead we should be using the last argument to specify the cdb length to avoid accidental overflow when reading the cdb buffer. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: consolidate opcode lookup in scsi_opcode_sa_name()Hannes Reinecke1-16/+23
Consolidate the CDB opcode lookup in scsi_opcode_sa_name(), so that we don't have to call several functions to figure out the CDB opcode string. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: merge print_opcode_name()Hannes Reinecke1-60/+38
Instead of having two versions of print_opcode_name() we should be consolidating them into one version. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: implement scsi_opcode_sa_nameHannes Reinecke1-78/+53
Implement a lookup array for SERVICE ACTION commands instead of hardcoding it in a large switch statement. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_print_status()Hannes Reinecke1-35/+0
Last caller is gone, so we can remove it. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: do not decode sense extrasHannes Reinecke1-62/+0
Currently we're only decoding sense extras for tape devices. And even there only for fixed format sense formats. As this is of rather limited use in the general case we should be stop trying to decode sense extras; the tape driver does its own decoding anyway. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: stop decoding if scsi_normalize_sense() failsHannes Reinecke1-18/+16
If scsi_normalize_sense() fails we couldn't decode the sense buffer, and the scsi_sense_hdr fields are invalid. For those cases we should rather dump the sense buffer and not try to decode invalid fields. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: use sdev as argument for sense code printingHannes Reinecke1-60/+60
We should be using the standard dev_printk() variants for sense code printing. [hch: remove __scsi_print_sense call in xen-scsiback, Acked by Juergen] [hch: folded bracing fix from Dan Carpenter] Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-12scsi: remove scsi_cmd_print_sense_hdr()Hannes Reinecke1-14/+0
Unused. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2013-07-09[SCSI] scsi constants: command, sense key + additional sense stringsDouglas Gilbert1-48/+187
It has been several years since the SCSI constants.c file has been updated. The attached is against lk 3.10 and brings the command strings, sense keys and additional sense code strings into sync with spc4r36g.pdf. Certain SCSI command names that previously only took the opcode (i.e. byte 0 of the cdb) into account, have been split into several command names using the associated service action field to differentiate. For example, persistent reservations that previously had 2 commands (i.e. "in" and "out") have been expanded to 12 commands (e.g. "Persistent reserve in, read reservation"). Sync SCSI command names, sense key strings and additional sense code strings with SPC-4 draft revision 36g [jejb: whitespace fix] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-14[SCSI] add DID_TARGET_FAILURE and DID_NEXUS_FAILURE to hostbyte_table in ↵Moger, Babu1-1/+2
constants.c Without this patch, scsi_show_result prints hostbyte as invalid for statuses that are not defined in hostbyte_table (when scsi logging is enabled). Signed-off-by: Babu Moger <babu.moger@netapp.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-05-23Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
2011-05-10treewide: fix a few typos in commentsJustin P. Mattock1-1/+1
- kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-15[SCSI] Log thin provisioning threshold eventShyam Iyer1-0/+1
At least log the message that we received a THIN PROVISIONING SOFT THRESHOLD REACHED Unit Attention. Also added it to unit attention decodes. Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-02[SCSI] Fix warning: zero-length gnu_printf format stringJean Sacren1-3/+3
warning: zero-length gnu_printf format string Fix the above warning by inserting a space into the literal string. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-19[SCSI] Fix printing of failed 32-byte commandsMartin K. Petersen1-0/+3
Having the large CDB allocation logic in sd.c means that scsi_io_completion does not have access to the command buffer. That in turn causes garbage to be printed when a 32-byte command fails. Move the command printing to sd_done where the command buffer is intact. Clear the command buffer pointer after the extended CDB has been freed. Make scsi_print_command ignore commands with NULL CDB pointers to inhibit printing of garbled command strings. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-19[SCSI] Fix printing of variable length commandsMartin K. Petersen1-10/+7
We dereferenced the MAINTENANCE IN array when decoding variable length commands. Use the right array. Also consolidate identical if statements below. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] scsi: Add missing command definitionsMartin K. Petersen1-0/+1
Add definitions for UNMAP, WRITE SAME{16,32} and GET LBA STATUS commands. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-22[SCSI] update scsi/constants.cDouglas Gilbert1-20/+75
It has been 3 years since this file was sync-ed with www.t10.org . Information taken from the last bunch of drafts released in May 2009. More asc/ascq codes are coming for thin provisioning; when approved and allocated another patch could add them prior to this patch going live. Changelog: - add some new command names and rename two commands - sync asc/ascq table with www.t10.org/lists/asc-num.txt - correct bug in scsi_extd_sense_format() [second for loop] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-03-12[SCSI] Remove SUGGEST flagsMartin K. Petersen1-10/+3
The SUGGEST_* flags in the SCSI command result have been out of fashion for a while and we don't actually use them in the error handling. Remove the remaining occurrences. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13[SCSI] scsi: add transport host byte errors (v3)Mike Christie1-1/+2
Currently, if there is a transport problem the iscsi drivers will return outstanding commands (commands being exeucted by the driver/fw/hw) with DID_BUS_BUSY and block the session so no new commands can be queued. Commands that are caught between the failure handling and blocking are failed with DID_IMM_RETRY or one of the scsi ml queuecommand return values. When the recovery_timeout fires, the iscsi drivers then fail IO with DID_NO_CONNECT. For fcp, some drivers will fail some outstanding IO (disk but possibly not tape) with DID_BUS_BUSY or DID_ERROR or some other value that causes a retry and hits the scsi_error.c failfast check, block the rport, and commands caught in the race are failed with DID_IMM_RETRY. Other drivers, may hold onto all IO and wait for the terminate_rport_io or dev_loss_tmo_callbk to be called. The following patches attempt to unify what upper layers will see drivers like multipath can make a good guess. This relies on drivers being hooked into their transport class. This first patch just defines two new host byte errors so drivers can return the same value for when a rport/session is blocked and for when the fast_io_fail_tmo fires. The idea is that if the LLD/class detects a problem and is going to block a rport/session, then if the LLD wants or must return the command to scsi-ml, then it can return it with DID_TRANSPORT_DISRUPTED. This will requeue the IO into the same scsi queue it came from, until the fast io fail timer fires and the class decides what to do. When using multipath and the fast_io_fail_tmo fires then the class can fail commands with DID_TRANSPORT_FAILFAST or drivers can use DID_TRANSPORT_FAILFAST in their terminate_rport_io callbacks or the equivlent in iscsi if we ever implement more advanced recovery methods. A LLD, like lpfc, could continue to return DID_ERROR and then it will hit the normal failfast path, so drivers do not have fully be ported to work better. The point of the patches is that upper layers will not see a failure that could be recovered from while the rport/session is blocked until fast_io_fail_tmo/recovery_timeout fires. V3 Remove some comments. V2 Fixed patch/diff errors and renamed DID_TRANSPORT_BLOCKED to DID_TRANSPORT_DISRUPTED. V1 initial patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02[SCSI] add support for variable length extended commandsBoaz Harrosh1-7/+3
Add support for variable-length, extended, and vendor specific CDBs to scsi-ml. It is now possible for initiators and ULD's to issue these types of commands. LLDs need not change much. All they need is to raise the .max_cmd_len to the longest command they support (see iscsi patch). - clean-up some code paths that did not expect commands to be larger than 16, and change cmd_len members' type to short as char is not enough. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] Add Documentation and integrate into docbook buildRob Landley1-1/+0
Add Documentation/DocBook/scsi_midlayer.tmpl, add to Makefile, and update lots of kerneldoc comments in drivers/scsi/*. Updated with comments from Stefan Richter, Stephen M. Cameron, James Bottomley and Randy Dunlap. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] add DID_REQUEUE string to scsi_show_result host tableMike Christie1-1/+1
I was working on patches which add new transport error values, when I noticed that DID_REQUEUE was not in the hostbyte_table. I do not think there is any way to hit the code path where scsi_show_result is called and where you return DID_REQUEUE, because DID_REQUEUE causes scsi-ml to always requeue the command. However, for completeness and because I want to one day send a patch that tries to add new host bytes values, I am sending this patch. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-12[SCSI] Fix device not ready printkJames Bottomley1-0/+14
Because scsi_print_sense_hdr prefixes with KERN_INFO, the output from scsi_io_completion looks like: sd 0:0:0:0: [sdb] Device not ready: <6>: Sense Key : 0x2 [current] : ASC=0x4 ASCQ=0x3 By using scsi_show_sense_hdr, we can get the much more appealing output: sd 0:0:0:0: [sdb] Device not ready: Sense Key : 0x2 [current] sd 0:0:0:0: [sdb] Device not ready: ASC=0x4 ASCQ=0x3 Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] make scsi_decode_sense_buffer and scsi_decode_sense_extras staticAdrian Bunk1-2/+2
Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] constants.c: Update ASC list and make it constMartin K. Petersen1-1/+6
Add missing additional sense code and provide pointer to upstream reference (from Doug Gilbert). Add missing const (from Michael Tokarev). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] constants.c: cleanup, verbose result printingMartin K. Petersen1-122/+145
Clean up constants.c and make result printing more user friendly: - Refactor the command and sense functions so that the actual formatting can be called from the various helper functions with the correct prefix. - Replace scsi_print_hostbyte() and scsi_print_driverbyte() with scsi_print_result() which is verbose when CONFIG_SCSI_CONSTANTS is on. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] update additional sense codes and some opcode namesDouglas Gilbert1-38/+88
Following on from my post titled: "additional sense codes need update" see the attachment against lk 2.6.17 . ChangeLog: - update additional sense codes table to agree with SPC-4 revision 5a (14 June 2006) - adjust some of the opcode names Signed-off-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-10[SCSI] remove scsi_request infrastructureChristoph Hellwig1-11/+1
With Achim patch the last user (gdth) is switched away from scsi_request so we an kill it now. Also disables some code in i2o_scsi that was broken since the sg driver stopped using scsi_requests. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-10[SCSI] drivers/scsi: Use ARRAY_SIZE macroTobias Klauser1-20/+13
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-15[SCSI] Move scsi_print_msg to SPI classMatthew Wilcox1-108/+0
scsi_print_msg() is an SPI-specific concept. This patch moves it from constants.c to scsi_transport_spi.c and updates the Kconfig to link in the SPI class for the drivers which use scsi_print_msg(). Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] Mark some core scsi data structures constArjan van de Ven1-8/+8
patch below marks a few scsi core datastructures as const, so that they end up in the .rodata section and don't cacheline share with things that get dirtied Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>