summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/be2iscsi/be.h
AgeCommit message (Collapse)AuthorFilesLines
2017-01-05scsi: be2iscsi: Remove unused struct membersJitendra Bhivare1-3/+0
Fix errors reported in static analysis. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23scsi: be2iscsi: Update copyright informationJitendra Bhivare1-2/+2
Change the copyright to: Copyright © xxxx - 2016 Broadcom Update email.ids: @avagotech.com - @broadcom.com Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23scsi: be2iscsi: Fix to add timer for UE detectionJitendra Bhivare1-4/+5
UE detection in health check is done in a work scheduled in global wq. UE caused due to transient parity errors are recoverable and reported within 1s. If this check for TPE gets delayed, PF0 might initiate soft-reset and then status of UE recoverable is lost. Handle UE detection in timer routine. Move out EQ delay update work from health check. Make the IOCTL for EQ delay update non-blocking as the completion status is ignored. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23scsi: be2iscsi: Fix to make boot discovery non-blockingJitendra Bhivare1-0/+2
Boot work involves: 1. Find and fetch configured boot session and its handle. 2. Attempt to open the session if its not. 3. Get the session details for boot kset creation. 4. Logout of that session owned by FW. 5. Create boot kset for session details. All these actions were done in blocking call with retries in global wq. Other works in wq suffered if the IOCTLs stalled or timed out. This change moves all the boot work to make it non-blocking. The work queued in global wq just issues the IOCTL depending on the action to be taken and mcc wq schedules work depending on status of the IOCTL. Initial boot_work is started on link and ASYNC event. The other code changes move all boot related functions in one place and follow naming conventions. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-23scsi: be2iscsi: Remove isr_lock and dead codeJitendra Bhivare1-1/+1
todo_mcc_cq is not needed as only MCC work is queued. todo_cq is not used at all. Rename functions to be consistent. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Couple MCC tag and WRB alloc and freeJitendra Bhivare1-1/+1
WARN_ON(atomic_read(&mccq->used) >= mccq->len) seen when FW gets into UE. MCCQ overflow is happening because driver discards any new request and frees up the tag. The tag allocation controls the number of MCC WRB posted. It is being replenished but WRBs are not hence the WARN_ON. Allocation and freeing of WRB and tags for MCC is now done in one place. This helps to achieve proper accounting of WRB indices and MCC tags. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Use macros for MCC WRB and CQE fieldsJitendra Bhivare1-1/+7
Rename mcc_numtag to mcc_tag_status. MCC CQE status is processed using macros already defined in be_cmds.h. Add MCC_Q_WRB_ and MCC_Q_CMD_TAG_MASK macros to map to already defined CQE_STATUS_ macros to be consistent when posting MCC. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Remove unused mcc_cq_lockJitendra Bhivare1-1/+0
mcc_cq_lock spin_lock is used only in beiscsi_process_mcc which is called only when all interrupts are disabled from mgmt_epfw_cleanup during unloading of driver. There is no other context where there can be contention for the processing of CQ. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix to use atomic bit operations for tag_stateJitendra Bhivare1-4/+3
beiscsi_mccq_compl sets MCC_TAG_STATE_TIMEOUT before setting up tag_mem_state. be_mcc_compl_process_isr checks for MCC_TAG_STATE_TIMEOUT first then accesses tag_mem_state which might be still getting populated in the process context. Fix: Set MCC_TAG_STATE_TIMEOUT after tag_mem_state is populated. Removed MCC_TAG_STATE_COMPLETED. When posted its in running state and the running state is cleared in be_mcc_compl_process_isr. be_mcc_notify now takes tag argument to set it to running state. Use bit operations for tag_state. Use barriers before setting the state. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-02-23be2iscsi: Fix mbox synchronization replacing spinlock with mutexJitendra Bhivare1-1/+1
This is second part of actual fix for soft lockup. All mbox cmds issued using BMBX and MCC are synchronized using mutex mbox_lock instead of spin_lock. Used mutex_lock_interruptible where ever possible. Signed-off-by: Jitendra Bhivare <jitendra.bhivare@avagotech.com> Reviewed-by: Shane Seymour <shane.seymour@hpe.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-11irq_poll: make blk-iopoll available outside the block layerChristoph Hellwig1-2/+2
The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
2015-10-27be2iscsi: Revert ownership to EmulexKetan Mukadam1-2/+2
We would like to get the following updates in: Revert ownership to "Emulex" from "Avago Technologies" Signed-off-by: Ketan Mukadam <ketan.mukadam@avagotech.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-05-18MAINTAINERS, be2iscsi: change email domainMinh Tran1-3/+3
be2iscsi change of ownership from Emulex to Avago Technologies recently. We like to get the following updates in: changed "Emulex" to "Avago Technologies", changed email addresses from "emulex.com" to "avagotech.com", updated MAINTAINER list for be2iscsi driver. Signed-off-by: Minh Tran <minh.tran@avagotech.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2014-09-16be2iscsi: Fix the copyright yearJayamohan Kallickal1-1/+1
Change the copyright year to 2014 Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28be2iscsi: Fix interrupt Coalescing mechanism.Jayamohan Kallickal1-0/+11
Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-03-15[SCSI] be2iscsi: Fix the session cleanup when reboot/shutdown happensJayamohan Kallickal1-0/+1
In iSCSI Boot scenario, when machine is reboot/shutdown phase the active sessions are not closed. Driver queue cleanup is done as part of unload and device is disabled. Sessions are still active, iSCSI commands are issued from session which comes to driver, as driver cleanup and device disabled there is kernel stack dump with errors. Fix is invoking iscsi_session_failure with ISCSI_ERR_INVALID_HOST on all the active sessions when shutdown routine is called. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-03-15[SCSI] be2iscsi: Fix handling timed out MBX completion from FWJayamohan Kallickal1-0/+10
When an MBX command timeout happens,the resources associated with the MBX command were freed. If FW were to give the response to host after the timeout value set by driver then driver crashes as the MBX Cmd resources were already freed. This patch fixes this issue by maintaing a state flag for each of the MBX command posted/timedout/completed. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-25[SCSI] be2iscsi: Fix soft lock up issue during UE or if FW taking time to ↵Jayamohan Kallickal1-1/+1
respond The timeout set in MBX_CMD is 100sec and the ready bit checking in BMBX mode is done for 4sec. After 4sec the task is scheduled out for 5 secs to avoid kernel soft lockup stack trace. The loop of 4sec ready bit check and then schedule out is done until the following conditon occur - The Ready Bit is Set - The timeout set in MBX_CMD expires Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] be2scsi: Update copyright dates to 2013Jayamohan Kallickal1-1/+1
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Update the copyright informationJohn Soni Jose1-1/+1
Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Fix driver support for Skyhawk-R adapter.John Soni Jose1-1/+1
Fix support for Skyhawk-R adapter by populating the pci_id_table Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-27[SCSI] be2iscsi: Fix kernel panic in blk_iopoll disable mode.John Soni Jose1-0/+3
Kernel used to panic while running IO is disable mode, as there was an issue with getting the correct EQ on which completion has come. Fix done is create workqueue per hba and work item for each EQ created. Signed-off-by: John Soni Jose <sony.john-n@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-04-23[SCSI] be2iscsi: Remove unused OFFSET_IN_PAGE() macroRoland Dreier1-4/+0
Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2011-04-15[SCSI] be2iscsi: change in copyright noticeJayamohan Kallickal1-5/+5
- Modifying copyright year to 2011 - Replacing Serverengines with Emulex as Serverengines Corp has been acquired by Emulex Corp Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-07-28[SCSI] be2iscsi: Fix warnings from new checkpatch.plJayamohan Kallickal1-3/+3
The latest checkpatch.pl throws some new warnings. Fixing it to get rid of a bunch of warnings Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] be2iscsi: Adding support for BE3Jayamohan Kallickal1-0/+3
This patch contains changes to support the BE3 chip Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] be2iscsi: changing copyright to 2010Jayamohan Kallickal1-1/+1
This patch replaces 2009 with 2010 in copyright statement Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18[SCSI] be2iscsi: Enable async mode for mcc ringsJayamohan Kallickal1-3/+13
This patches enables async mode for mcc rings so that multiple requests can be queued. Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] be2iscsi: Adding msix and mcc_rings V3Jayamohan Kallickal1-15/+9
This patch enables msix for be2iscsi. It also enables use of mcc_rings for fw commands. Since the mcc eq creation is dependent on msix I am sending as one patch Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02[SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driverJayamohan Kallickal1-0/+183
[v2: fixed up virt_to_bus() issue spotted by sfr] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 14:30:19 +0000