summaryrefslogtreecommitdiffstats
path: root/drivers/sbus
AgeCommit message (Collapse)AuthorFilesLines
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky1-1/+0
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-14sbus: char: Remove meaningless jump label out_freeJing Xiangfeng1-3/+1
After commit 57a4a3d7f756 ("display7seg: Introduce the use of the managed version of kzalloc"), The out_free jump label has nothing to do but goto out. So remove it. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport2-2/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-17oradax: convert get_user_pages() --> pin_user_pages()John Hubbard1-5/+3
This code was using get_user_pages_fast(), in a "Case 2" scenario (DMA/RDMA), using the categorization from [1]. That means that it's time to convert the get_user_pages_fast() + put_page() calls to pin_user_pages_fast() + unpin_user_pages() calls. There is some helpful background in [2]: basically, this is a small part of fixing a long-standing disconnect between pinning pages, and file systems' use of those pages. [1] Documentation/core-api/pin_user_pages.rst [2] "Explicit pinning of user-space pages": https://lwn.net/Articles/807108/ Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18misc: move FLASH_MINOR into miscdevice.h and fix conflictsZhenzhong Duan1-3/+1
FLASH_MINOR is used in both drivers/char/nwflash.c and drivers/sbus/char/flash.c with conflict minor numbers. Move all the definitions of FLASH_MINOR into miscdevice.h. Rename FLASH_MINOR for drivers/char/nwflash.c to NWFLASH_MINOR and FLASH_MINOR for drivers/sbus/char/flash.c to SBUS_FLASH_MINOR. Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Link: https://lore.kernel.org/r/20200311071654.335-3-zhenzhong.duan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18misc: cleanup minor number definitions in c file into miscdevice.hZhenzhong Duan2-4/+0
HWRNG_MINOR and RNG_MISCDEV_MINOR are duplicate definitions, use unified HWRNG_MINOR instead and moved into miscdevice.h ANSLCD_MINOR and LCD_MINOR are duplicate definitions, use unified LCD_MINOR instead and moved into miscdevice.h MISCDEV_MINOR is renamed to PXA3XX_GCU_MINOR and moved into miscdevice.h Other definitions are just moved without any change. Link: https://lore.kernel.org/lkml/20200120221323.GJ15860@mit.edu/t/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Build-tested-by: Willy TARREAU <wtarreau@haproxy.com> Build-tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20200311071654.335-2-zhenzhong.duan@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann2-4/+2
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner5-0/+5
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14mm/gup: change GUP fast to use flags rather than a write 'bool'Ira Weiny1-1/+1
To facilitate additional options to get_user_pages_fast() change the singular write parameter to be gup_flags. This patch does not change any functionality. New functionality will follow in subsequent patches. Some of the get_user_pages_fast() call sites were unchanged because they already passed FOLL_WRITE or 0 for the write parameter. NOTE: It was suggested to change the ordering of the get_user_pages_fast() arguments to ensure that callers were converted. This breaks the current GUP call site convention of having the returned pages be the final parameter. So the suggestion was rejected. Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Mike Marshall <hubcap@omnibond.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-08docs: sparc: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the sparc documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. There is an except from a document under oradax dir. It doesn't seem to make much sense to convert this one to ReST, so let's add it as an included document. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-nextLinus Torvalds3-8/+8
Pull sparc updates from David Miller: - Automatic system call table generation, from Firoz Khan. - Clean up accesses to the OF device names by using full_name instead of path_component_name. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: ALSA: sparc: Use of_node_name_eq for node name comparisons sbus: Use of_node_name_eq for node name comparisons sparc: generate uapi header and system call table files sparc: add system call table generation support sparc: add __NR_syscalls along with NR_syscalls sparc: move __IGNORE* entries to non uapi header sparc: Use DT node full_name instead of name for resources sparc: Remove unused leon_trans_init sparc: Use device_type helpers to access the node type sparc: Use of_node_name_eq for node name comparisons sparc: Convert to using %pOFn instead of device_node.name sparc: prom: use property "name" directly to construct node names of: Drop full path from full_name for PDT systems sparc: Convert to using %pOF instead of full_name fs/openpromfs: Use of_node_name_eq for node name comparisons fs/openpromfs: use full_name instead of path_component_name
2018-12-05sbus: Use of_node_name_eq for node name comparisonsRob Herring3-8/+8
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02drivers/sbus/char: add of_node_put()Yangtao Li1-0/+2
use of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-02sbus: char: add of_node_put()Yangtao Li1-0/+1
use of_node_put() to release the refcount. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07oradax: remove redundant null check before kfreeColin Ian King1-2/+1
A null check before a kfree is redundant, so remove it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-07sbus: Use of_get_child_by_name helperRob Herring1-10/+1
Use the of_get_child_by_name() helper instead of open coding searching for the '/options' node. This removes directly accessing the name pointer as well. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15fix a series of Documentation/ broken file name referencesMauro Carvalho Chehab1-1/+1
As files move around, their previous links break. Fix the references for them. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-05-15Remove jsflash driverJens Axboe3-668/+0
Nobody is using it anymore, and it's been abandoned. Since David is fine with removing it, kill it. Suggested-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-11jsflash: handle highmem pagesChristoph Hellwig1-2/+4
Just kmap the bio single page payload before processing it. (and yes, now highmem on sparc32 anyway, but kmap_(un)map atomic are nops, so this gives the right example) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-30sparc64: Fix mistake in oradax license textRob Gardner1-1/+1
The license text in both oradax files mistakenly specifies "version 3" of the GNU General Public License. This is corrected to specify "version 2". Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01sparc64: Properly range check DAX completion indexRob Gardner1-1/+1
Each Oracle DAX CCB has a corresponding completion area, and the required number of areas must fit within a previously allocated array of completion areas beginning at the requested index. Since the completion area index is specified by a file offset, a user can pass arbitrary values, including negative numbers. So the index must be thoroughly range checked to prevent access to addresses outside the bounds of the allocated completion area array. The index cannot be negative, and it cannot exceed the total array size, less the number of CCBs requested. The old code did not check for negative values and was off by one on the upper bound. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18sparc64: Oracle DAX driver depends on SPARC64Guenter Roeck1-1/+2
sparc:allmodconfig fails to build as follows. ERROR: "mdesc_release" [drivers/sbus/char/oradax.ko] undefined! ERROR: "sun4v_hvapi_register" [drivers/sbus/char/oradax.ko] undefined! ERROR: "mdesc_get_property" [drivers/sbus/char/oradax.ko] undefined! ERROR: "mdesc_node_by_name" [drivers/sbus/char/oradax.ko] undefined! ERROR: "mdesc_grab" [drivers/sbus/char/oradax.ko] undefined! ERROR: "sun4v_ccb_info" [drivers/sbus/char/oradax.ko] undefined! ERROR: "sun4v_ccb_submit" [drivers/sbus/char/oradax.ko] undefined! ERROR: "sun4v_ccb_kill" [drivers/sbus/char/oradax.ko] undefined! The symbols are only available with SPARC64 builds, thus the driver depends on it. Fixes: dd0273284c74 ("sparc64: Oracle DAX driver") Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-01-29oradax: Fix return value check in dax_attach()Wei Yongjun1-2/+2
In case of error, the function class_create() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: dd0273284c74 ("sparc64: Oracle DAX driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22sparc64: Oracle DAX driverRob Gardner3-0/+1014
DAX is a coprocessor which resides on the SPARC M7 (DAX1) and M8 (DAX2) processor chips, and has direct access to the CPU's L3 caches as well as physical memory. It can perform several operations on data streams with various input and output formats. This driver provides a transport mechanism and has limited knowledge of the various opcodes and data formats. A user space library provides high level services and translates these into low level commands which are then passed into the driver and subsequently the hypervisor and the coprocessor. The library is the recommended way for applications to use the coprocessor, and the driver interface is not intended for general use. Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com> Signed-off-by: Sanath Kumar <sanath099@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17openprom: Deprecate pci_get_bus_and_slot()Sinan Kaya1-2/+3
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Hard-coding the domain as 0 since domain information is not available. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: David S. Miller <davem@davemloft.net>
2017-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-1/+0
Pull sparc updates from David Miller: 1) Add missing cmpxchg64() for 32-bit sparc. 2) Timer conversions from Allen Pais and Kees Cook. 3) vDSO support, from Nagarathnam Muthusamy. 4) Fix sparc64 huge page table walks based upon bug report by Al Viro, from Nitin Gupta. 5) Optimized fls() for T4 and above, from Vijay Kumar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix page table walk for PUD hugepages sparc64: Convert timers to user timer_setup() sparc64: convert mdesc_handle.refcnt from atomic_t to refcount_t sparc/led: Convert timers to use timer_setup() sparc64: Use sparc optimized fls and __fls for T4 and above sparc64: SPARC optimized __fls function sparc64: SPARC optimized fls function sparc64: Define SPARC default __fls function sparc64: Define SPARC default fls function vDSO for sparc sparc32: Add cmpxchg64(). sbus: char: Move D7S_MINOR to include/linux/miscdevice.h sparc: time: Remove unneeded linux/miscdevice.h include sparc64: mmu_context: Add missing include files
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27sbus: char: Move D7S_MINOR to include/linux/miscdevice.hCorentin Labbe1-1/+0
This patch move the define for D7S_MINOR to include/linux/miscdevice.h. It's better that all minor number are in the same place. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20sbus: Convert to using %pOF instead of full_nameRob Herring3-6/+6
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27block: don't set bounce limit in blk_init_queueChristoph Hellwig1-0/+1
Instead move it to the callers. Those that either don't use bio_data() or page_address() or are specific to architectures that do not support highmem are skipped. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: introduce new block status code typeChristoph Hellwig1-2/+2
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-28jsflash: stop sharing request queue across multiple gendisksOmar Sandoval1-14/+36
Compile-tested only (by hacking it to compile on x86). Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds5-5/+5
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20openprom: fix warningSam Ravnborg1-24/+16
Fix following warnings: openprom.c:510:2: warning: 'tmp' may be used uninitialized in this function [-Wmaybe-uninitialized] openprom.c:503:3: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized] openprom.c:459:8: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized] openprom.c:422:7: warning: 'str' may be used uninitialized in this function [-Wmaybe-uninitialized] Fixed by introducing PTR_ERR etc. This simplified the code as a nice side effect. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04convert a bunch of open-coded instances of memdup_user_nul()Al Viro1-10/+3
A _lot_ of ->write() instances were open-coding it; some are converted to memdup_user_nul(), a lot more remain... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15drivers/sbus/char/envctrl.c: ignore orderly_poweroff return valueJoel Stanley2-8/+2
orderly_poweroff() unconditionally returns 0, so remove the dead code that checks the return value. A future patch will change the return type to void. Signed-off-by: Joel Stanley <joel@jms.id.au> Acked-by: David S. Miller <davem@davemloft.net> Cc: Fabian Frederick <fabf@skynet.be> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-20sbus: char: drop owner assignment from platform_driversWolfram Sang5-5/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcDavid S. Miller2-3/+14
Conflicts: arch/sparc/mm/init_64.c Conflict was simple non-overlapping additions. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04bbc-i2c: Fix BBC I2C envctrl on SunBlade 2000Christopher Alexander Tobias Schulze2-3/+14
Fix regression in bbc i2c temperature and fan control on some Sun systems that causes the driver to refuse to load due to the bbc_i2c_bussel resource not being present on the (second) i2c bus where the temperature sensors and fan control are located. (The check for the number of resources was removed when the driver was ported to a pure OF driver in mid 2008.) Signed-off-by: Christopher Alexander Tobias Schulze <cat.schulze@alice-dsl.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21drivers/sbus/char: Micro-optimization in display7seg.cRasmus Villemoes1-4/+1
Flipping a bit doesn't need four lines of code; and gcc seems to actually generate two branches. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21display7seg: Introduce the use of the managed version of kzallocHimangi Saraogi1-3/+2
This patch moves data allocated using kzalloc to managed data allocated using devm_kzalloc and cleans now unnecessary kfrees in probe and remove functions. The header file is added to make the devm function explicitly available. The following Coccinelle semantic patch was used for making a part of the change: @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression e; @@ removefn(...) { <... - kfree(e); ...> } Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16jsflash: missed conversion from rq->buffer to bio_data(rq->bio)Jens Axboe1-1/+1
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-20Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2]David Howells1-1/+0
sparc_cpu_model isn't in asm/system.h any more, so remove a comment about it. Signed-off-by: David Howells <dhowells@redhat.com> cc: "David S. Miller" <davem@davemloft.net> cc: sparclinux@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28sparc: delete non-required instances of include <linux/init.h>Paul Gortmaker5-5/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31bbc_i2c: fix section mismatch warningSam Ravnborg1-2/+2
Fix following warning: WARNING: drivers/sbus/char/bbc.o(.text+0x674): Section mismatch in reference from the function bbc_i2c_probe() to the function .init.text:T.463() The function bbc_i2c_probe() references the function __init T.463(). This is often because bbc_i2c_probe lacks a __init annotation or the annotation of T.463 is wrong. bbc_i2c_probe() referenced the inlined attach_one_i2c(). As probe may be called after init drop __init annotations on all functions used by bbc_i2c_probe() The warning was seen with a sparc64 defconfig build Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>