summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2019-03-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-0/+38
Pull KVM updates from Paolo Bonzini: "ARM: - some cleanups - direct physical timer assignment - cache sanitization for 32-bit guests s390: - interrupt cleanup - introduction of the Guest Information Block - preparation for processor subfunctions in cpu models PPC: - bug fixes and improvements, especially related to machine checks and protection keys x86: - many, many cleanups, including removing a bunch of MMU code for unnecessary optimizations - AVIC fixes Generic: - memcg accounting" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (147 commits) kvm: vmx: fix formatting of a comment KVM: doc: Document the life cycle of a VM and its resources MAINTAINERS: Add KVM selftests to existing KVM entry Revert "KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()" KVM: PPC: Book3S: Add count cache flush parameters to kvmppc_get_cpu_char() KVM: PPC: Fix compilation when KVM is not enabled KVM: Minor cleanups for kvm_main.c KVM: s390: add debug logging for cpu model subfunctions KVM: s390: implement subfunction processor calls arm64: KVM: Fix architecturally invalid reset value for FPEXC32_EL2 KVM: arm/arm64: Remove unused timer variable KVM: PPC: Book3S: Improve KVM reference counting KVM: PPC: Book3S HV: Fix build failure without IOMMU support Revert "KVM: Eliminate extra function calls in kvm_get_dirty_log_protect()" x86: kvmguest: use TSC clocksource if invariant TSC is exposed KVM: Never start grow vCPU halt_poll_ns from value below halt_poll_ns_grow_start KVM: Expose the initial start value in grow_halt_poll_ns() as a module parameter KVM: grow_halt_poll_ns() should never shrink vCPU halt_poll_ns KVM: x86/mmu: Consolidate kvm_mmu_zap_all() and kvm_mmu_zap_mmio_sptes() KVM: x86/mmu: WARN if zapping a MMIO spte results in zapping children ...
2019-03-10Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-1/+11
Pull virtio updates from Michael Tsirkin: "Several fixes, most notably fix for virtio on swiotlb systems" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: silence an unused-variable warning virtio: hint if callbacks surprisingly might sleep virtio-ccw: wire up ->bus_name callback s390/virtio: handle find on invalid queue gracefully virtio-ccw: diag 500 may return a negative cookie virtio_balloon: remove the unnecessary 0-initialization virtio-balloon: improve update_balloon_size_func virtio-blk: Consider virtio_max_dma_size() for maximum segment size virtio: Introduce virtio_max_dma_size() dma: Introduce dma_max_mapping_size() swiotlb: Add is_swiotlb_active() function swiotlb: Introduce swiotlb_max_mapping_size()
2019-03-06virtio-ccw: wire up ->bus_name callbackCornelia Huck1-0/+8
Return the bus id of the ccw proxy device. This makes 'ethtool -i' show a more useful value than 'virtio' in the bus-info field. Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-06s390/virtio: handle find on invalid queue gracefullyHalil Pasic1-1/+3
A queue with a capacity of zero is clearly not a valid virtio queue. Some emulators report zero queue size if queried with an invalid queue index. Instead of crashing in this case let us just return -ENOENT. To make that work properly, let us fix the notifier cleanup logic as well. Cc: stable@vger.kernel.org Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-05Merge tag 's390-5.1-1' of ↵Linus Torvalds15-54/+132
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
2019-03-01s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=yMartin Schwidefsky1-14/+5
The dasd_eckd_restore_device() function calls dasd_generic_read_dev_chars with a temporary buffer on the stack. With CONFIG_VMAP_STACK=y this is a vmalloc address but dasd_generic_restore_device() uses the address of the buffer as I/O address. Circumvent this by using the already allocated cqr->data buffer for the RDC data. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-28s390/qeth: drop redundant state checkingJulian Wiedmann5-43/+13
Now that qeth always uses dev_close() to shutdown the interface, we can trust the locking and remove some custom state checks. qeth_l?_stop_card() is no longer called for a card in UP state, so remove the checks there too. This basically makes the UP state obsolete, so rip out the whole thing (except for the sysfs-visible string). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't special-case HW trap during suspendJulian Wiedmann2-12/+4
It makes no difference whether we 1. manually disarm the HW trap and call the offline code with recovery_mode == 1, or 2. call the offline code with recovery_mode == 0, and let it disarm the HW trap for us. So consolidate the two code paths in the suspend callback. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove driver-wide workqueueJulian Wiedmann1-18/+1
The qeth-wide workqueue is now only used by a single caller to schedule close_dev work. Just put it on a system queue instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: don't defer close_dev work during recoveryJulian Wiedmann4-5/+3
The recovery code already runs in a kthread, we don't have to defer the offlining further. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove a redundant check for card->devJulian Wiedmann1-1/+1
smatch complains that __qeth_l3_set_offline() first accesses card->dev, and then later checks whether the pointer is valid. Since commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), the pointer is _always_ valid - that patch merely missed to remove this one check. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: call dev_close() during recoveryJulian Wiedmann3-75/+20
When resetting an interface ("recovery"), qeth currently attempts to elide the call to dev_close(). We initially only call .ndo_close to quiesce the data path, and then offline & online the ccwgroup device. If the reset succeeded, a call to .ndo_open then resumes the data path along with some internal setup (dev_addr validation, RX modeset) that dev_open() would have usually triggered. dev_close() only gets called (via the close_dev worker) if the reset action fails. It's unclear whether this was initially done due to locking concerns, or rather to execute the reset transparently. Either way, temporarily closing the interface without dev_close() is fragile, and means we're susceptible to various races and unexpected behaviour. For instance: - Bypassing dev_deactivate_many() means that the qdiscs are not set to __QDISC_STATE_DEACTIVATED. Consequently any intermittent TX completion can wake up the txq, resulting in calls to .ndo_start_xmit while the data path is down. We have custom state checking to detect this case and drop such packets. - Because the IFF_UP flag doesn't reflect the interface's actual state during a reset, we have custom state checking in .ndo_open and .ndo_close to guard against invalid calls. - Considering that the reset might take a considerable amount of time (in particular if an IO fails and we end up waiting for its timeout), we _do_ want NETDEV_GOING_DOWN and NETDEV_DOWN events so that components like bonding, team, bridge, macvlan, vlan, ... can take appropriate action. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: unconditionally clear MAC_REGISTERED flagJulian Wiedmann2-2/+1
In its attempt to run only the minimal amount of tear down steps, qeth_l2_stop_card() fails to reset the "is dev_addr registered?" flag in some rare scenarios. But a future change to the tear down sequence would cause us to _always_ hit this issue, so patch it up before that code lands. Fix it by unconditionally clearing the flag bit. This also allows us to remove the additional cleanup step in qeth_dev_layer2_store(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: enable/disable the HW trap a little earlierJulian Wiedmann2-14/+17
When setting a L2 qeth device online, enable the HW trap as soon as the control plane is available. This allows us to catch any error that occurs during the very first commands. In the same spirit, the offline code should disable the HW trap as the very first step of its processing. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28s390/qeth: remove RECOVER stateJulian Wiedmann6-47/+25
The offline code uses a specific RECOVER state to indicate that the interface should be brought up when a qeth device is set online again. Rather than having a specific card-state for this, just put it in an internal flag bit and set the state to DOWN. When working with the card's state transitions, this reduces the complexity quite a bit. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-26s390/cio: Use cpa range elsewhere within vfio-ccwEric Farman1-12/+6
Since we have a little function to see whether a channel program address falls within a range of CCWs, let's use it in the other places of code that make these checks. (Why isn't ccw_head fully removed? Well, because this way some longs lines don't have to be reflowed.) Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190222183941.29596-3-farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-26s390/cio: Fix vfio-ccw handling of recursive TICsEric Farman1-1/+36
The routine ccwchain_calc_length() is tasked with looking at a channel program, seeing how many CCWs are chained together by the presence of the Chain-Command flag, and returning a count to the caller. Previously, it also considered a Transfer-in-Channel CCW as being an appropriate mechanism for chaining. The problem at the time was that the TIC CCW will almost certainly not go to the next CCW in memory (because the CC flag would be sufficient), and so advancing to the next 8 bytes will cause us to read potentially invalid memory. So that comparison was removed, and the target of the TIC is processed as a new chain. This is fine when a TIC goes to a new chain (consider a NOP+TIC to a channel program that is being redriven), but there is another scenario where this falls apart. A TIC can be used to "rewind" a channel program, for example to find a particular record on a disk with various orientation CCWs. In this case, we DO want to consider the memory after the TIC since the TIC will be skipped once the requested criteria is met. This is due to the Status Modifier presented by the device, though software doesn't need to operate on it beyond understanding the behavior change of how the channel program is executed. So to handle this, we will re-introduce the check for a TIC CCW but limit it by examining the target of the TIC. If the TIC doesn't go back into the current chain, then current behavior applies; we should stop counting CCWs and let the target of the TIC be handled as a new chain. But, if the TIC DOES go back into the current chain, then we need to keep looking at the memory after the TIC for when the channel breaks out of the TIC loop. We can't use tic_target_chain_exists() because the chain in question hasn't been built yet, so we will redefine that comparison with some small functions to make it more readable and to permit refactoring later. Fixes: 405d566f98ae ("vfio-ccw: Don't assume there are more ccws after a TIC") Signed-off-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20190222183941.29596-2-farman@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-02-22Merge tag 'kvm-s390-next-5.1-1' of ↵Paolo Bonzini2-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: Features for 5.1 - Clarify KVM related kernel messages - Interrupt cleanup - Introduction of the Guest Information Block (GIB) - Preparation for processor subfunctions in cpu model
2019-02-22s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystemPierre Morel3-11/+38
Libudev relies on having a subsystem link for non-root devices. To avoid libudev (and potentially other userspace tools) choking on the matrix device let us introduce a matrix bus and with it the matrix bus subsytem. Also make the matrix device reside within the matrix bus. Doing this we remove the forced link from the matrix device to the vfio_ap driver and the device_type we do not need anymore. Since the associated matrix driver is not the vfio_ap driver any more, we have to change the search for the devices on the vfio_ap driver in the function vfio_ap_verify_queue_reserved. Fixes: 1fde573413b5 ("s390: vfio-ap: base implementation of VFIO AP device driver") Cc: stable@vger.kernel.org Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-21pkey: Indicate old mkvp only if old and current mkvp are differentIngo Franzki1-1/+1
When the CCA master key is set twice with the same master key, then the old and the current master key are the same and thus the verification patterns are the same, too. The check to report if a secure key is currently wrapped by the old master key erroneously reports old mkvp in this case. Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-20s390/ism: ignore some errors during deregistrationSebastian Ott1-3/+9
Prior to dma unmap/free operations the ism driver tries to ensure that the memory is no longer accessed by the HW. When errors during deregistration of memory regions from the HW occur the ism driver will not unmap/free this memory. When we receive notification from the hypervisor that a PCI function has been detached we can no longer access the device and would never unmap/free these memory regions which led to complaints by the DMA debug API. Treat this kind of errors during the deregistration of memory regions from the HW as success since it is already ensured that the memory is no longer accessed by HW. Reported-by: Karsten Graul <kgraul@linux.ibm.com> Reported-by: Hans Wippel <hwippel@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-15s390/qeth: split out OSN netdev opsJulian Wiedmann3-15/+21
Rather than special-casing OSN in a number of places, just give this device type its own netdev_ops structure. When setting up the OSN net_device, also skip the handling of the various HW offloads (eg TSO). The device shouldn't be advertising any of them, and the OSN code paths in qeth don't have support for them. In particular RX VLAN filtering is not supported, so don't hook up those callbacks in the netdev_ops. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: add support for ETHTOOL_GRINGPARAMJulian Wiedmann1-0/+17
Implement a trivial callback that exposes the queue sizes. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: overhaul ethtool statisticsJulian Wiedmann6-216/+256
Accumulate per-TX queue statistics, and increase their size to 64 bit. Don't bother with enabling/disabling the statistics, the overhead is negligible. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: move ethtool code into its own fileJulian Wiedmann6-351/+346
Most of this is self-contained code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: reduce ethtool statisticsJulian Wiedmann4-123/+7
Counting the number of function calls and the time spent in functions is best left to proper tracing facilities. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: use a static Output Queue arrayJulian Wiedmann2-16/+7
qeth dynamically allocates an array for storing pointers to its Output Queue structures. Switch this to a static array - we are currently limited to 4 Output Queues, so shrinking the qeth_qdio_info struct by just a few bytes doesn't justify the additional complexity. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15s390/qeth: allow manual recovery when device is SOFTSETUPJulian Wiedmann1-1/+1
Once a qeth ccwgroup device is set online, it's also armed for internal recovery. So allow for testing that code path via sysfs, regardless of whether the interface is up or down. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+10
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13s390/zcrypt: use new state UNBOUND during queue driver rebindHarald Freudenberger3-4/+25
When an alternate driver (vfio-ap) has bound an ap queue and this binding is revised the ap queue device is in an intermittent state not bound to any driver. The internal state variable covered this with the state AP_STATE_BORKED which is also used to reflect broken devices. When now an ap bus scan runs such a device is destroyed and on the next scan reconstructed. So a stress test with high frequency switching the queue driver between the default and the vfio-ap driver hit this gap and the queue was removed until the next ap bus scan. This fix now introduces another state for the in-between condition for a queue momentary not bound to a driver and so the ap bus scan function skips this device instead of removing it. Also some very slight but maybe helpful debug feature messages come with this patch - in particular a message showing that a broken card/queue device will get removed. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-12s390/qeth: convert remaining legacy cmd callbacksJulian Wiedmann3-103/+121
This calls the existing errno translation helpers from the callbacks, adding trivial wrappers where necessary. For cmds that have no sophisticated errno translation, default to -EIO. For IPA cmds with no callback, fall back to a minimal default. This is currently being used by qeth_l3_send_setrouting(). Thus having all converted all callbacks, remove the legacy path in qeth_send_control_data_cb(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: convert bridgeport callbacksJulian Wiedmann1-54/+40
By letting the callbacks deal with error translation, we no longer need to pass the raw error codes back to the originator. This allows us to slim down the callback's private data, and nicely simplifies the code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: allow cmd callbacks to return errnosJulian Wiedmann6-64/+76
Error propagation from cmd callbacks currently works in a way where qeth_send_control_data_cb() picks the raw HW code from the response, and the cmd's originator later translates this into an errno. The callback itself only returns 0 ("done") or 1 ("expect more data"). This is 1. limiting, as the only means for the callback to report an internal error is to invent pseudo HW codes (such as IPA_RC_ENOMEM), that the originator then needs to understand. For non-IPA callbacks, we even provide a separate field in the IO buffer metadata (iob->rc) so the callback can pass back a return value. 2. fragile, as the originator must take care to not translate any errno that is returned by qeth's own IO code paths (eg -ENOMEM). Also, any originator that forgets to translate the HW codes potentially passes garbage back to its caller. For instance, see commit 2aa4867198c2 ("s390/qeth: translate SETVLAN/DELVLAN errors"). Introduce a new model where all HW error translation is done within the callback, and the callback returns > 0, if it expects more data (as before) == 0, on success < 0, with an errno Start off with converting all callbacks to the new model that either a) pass back pseudo HW codes, or b) have a dependency on a specific HW error code. Also convert c) the one callback that uses iob->rc, and d) qeth_setadpparms_change_macaddr_cb() so that it can pass back an error back to qeth_l2_request_initial_mac() even when the cmd itself was successful. The old model remains supported: if the callback returns 0, we still propagate the response's HW error code back to the originator. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: cancel cmd on early errorJulian Wiedmann2-9/+29
When sending cmds via qeth_send_control_data(), qeth puts the request on the IO channel and then blocks on the reply object until the response has been received. If the IO completes with error, there will never be a response and we block until the reply-wait hits its timeout. For this case, connect the request buffer to its reply object, so that we can immediately cancel the wait. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: simplify reply object handlingJulian Wiedmann1-57/+61
Current code enqueues & dequeues a reply object from the waiter list in various places. In particular, the dequeue & enqueue in qeth_send_control_data_cb() looks fragile - this can cause qeth_clear_ipacmd_list() to skip the active object. Add some helpers, and boil the logic down by giving qeth_send_control_data() the sole responsibility to add and remove objects. qeth_send_control_data_cb() and qeth_clear_ipacmd_list() will now only notify the reply object to interrupt its wait cycle. This can cause a slight delay in the removal, but that's no concern. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: limit trace to valid data of command requestJulian Wiedmann1-1/+1
'len' specifies how much data we send to the HW, don't dump beyond this boundary. As of today this is no big concern - commands are built in full, zeroed pages. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: align csum offload with TSO control logicJulian Wiedmann2-89/+47
csum offload and TSO have similar programming requirements. The TSO code was reworked with commit "s390/qeth: enhance TSO control sequence", adjust the csum control flow accordingly. Primarily this means replacing custom helpers with more generic infrastructure. Also, change the LP2LP check so that it warns on TX offload (not RX). This is where reduced csum capability actually matters. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: enable only required csum offload featuresJulian Wiedmann1-2/+9
Current code attempts to enable all advertised HW csum offload features. Future-proof this by enabling only those features that we actually use. Also, the IPv4 header csum feature is only needed for TX on L3 devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: consolidate filling of low-level cmd length fieldsJulian Wiedmann5-56/+28
The code to fill the IPA length fields is duplicated three times across the driver: 1. qeth_send_ipa_cmd() sets IPA_CMD_LENGTH, which matches the defaults in the IPA_PDU_HEADER template. 2. for OSN, qeth_osn_send_ipa_cmd() bypasses this logic and inserts the length passed by the caller. 3. SNMP commands (that can outgrow IPA_CMD_LENGTH) have their own way of setting the length fields, via qeth_send_ipa_snmp_cmd(). Consolidate this into qeth_prepare_ipa_cmd(), which all originators of IPA cmds already call during setup of their cmd. Let qeth_send_ipa_cmd() pull the length from the cmd instead of hard-coding IPA_CMD_LENGTH. For now, the SNMP code still needs to fix-up its length fields manually. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12s390/qeth: reduce data length for ARP cache queryJulian Wiedmann4-18/+7
qeth_l3_query_arp_cache_info() indicates a data length that's much larger than the actual length of its request (ie. the value passed to qeth_get_setassparms_cmd()). The confusion presumably comes from the fact that the cmd _response_ can be quite large - but that's no concern for the initial request IO. Fixing this up allows us to use the generic qeth_send_ipa_cmd() infrastructure. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11Merge tag 's390-5.0-3' of ↵Linus Torvalds2-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 bug fixes from Martin Schwidefsky: - Fix specification exception on z196 during ap probe - A fix for suspend-to-disk, the VMAP stack patch broke the swsusp_arch_suspend function - The EMC CKD ioctl of the dasd driver needs an additional size check for user space data - Revert an incorrect patch for the PCI base code that removed a bit lock that turned out to be required after all * tag 's390-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: Revert "s390/pci: remove bit_lock usage in interrupt handler" s390/zcrypt: fix specification exception on z196 during ap probe s390/dasd: fix using offset into zero size array error s390/suspend: fix stack setup in swsusp_arch_suspend
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-15/+33
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-14/+31
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ...
2019-02-07Merge tag 'vfio-ccw-20190204' of ↵Martin Schwidefsky1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features Pull vfio-ccw from Cornelia Huck with the following changes: - A fix in ccw chain processing.
2019-02-07s390/qdio: make SBAL address array type-safeJulian Wiedmann3-7/+7
There is no need to use void pointers, all drivers are in agreement about the underlying data structure of the SBAL arrays. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-05s390/cio: add function chsc_sgib()Michael Mueller2-0/+38
This patch implements the Set Guest Information Block operation to request association or disassociation of a Guest Information Block (GIB) with the Adapter Interruption Facility. The operation is required to receive GIB alert interrupts for guest adapters in conjunction with AIV and GISA. Signed-off-by: Michael Mueller <mimu@linux.ibm.com> Reviewed-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20190131085247.13826-9-mimu@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-02-04s390/qeth: conclude all event processing before offlining a cardJulian Wiedmann4-5/+15
Work for Bridgeport events is currently placed on a driver-wide workqueue. If the card is removed and freed while any such work is still active, this causes a use-after-free. So put the events on a per-card queue, where we can control their lifetime. As we also don't want stale events to last beyond an offline & online cycle, flush this queue when setting the card offline. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: cancel close_dev work before removing a cardJulian Wiedmann3-0/+4
A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: fix use-after-free in error pathJulian Wiedmann1-9/+6
The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-04s390/qeth: release cmd buffer in error pathsJulian Wiedmann1-0/+6
Whenever we fail before/while starting an IO, make sure to release the IO buffer. Usually qeth_irq() would do this for us, but if the IO doesn't even start we obviously won't get an interrupt for it either. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 21:30:04 +0000