summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2010-02-17[SCSI] zfcp: Dont use 0 to indicate invalid LUN in rec traceChristof Schmitt2-6/+8
0 is a valid value for a LUN. It is slightly confusing to also see 0 in the trace entries relating to adapter and port. Change this to use 0xFFFFFFFFFFFFFFFF in the LUN field when the trace entry does not relate to a LUN or unit. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] zfcp: Fix warnings from smatchChristof Schmitt1-11/+2
The smatch tool from http://repo.or.cz/w/smatch.git warns about this: drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device' drivers/s390/scsi/zfcp_scsi.c +64 zfcp_scsi_command_fail(5) warn: variable dereferenced before check 'scpnt->device->host' drivers/s390/scsi/zfcp_scsi.c +93 zfcp_scsi_queuecommand(23) warn: variable dereferenced before check 'unit' Fix the first two warnings by removing the checks for scpnt->device and -> host: As long as the SCSI command exists, there is also a scsi_device and a Scsi_Host. Fix the last warning by removing the BUG_ON checks in zfcp_scsi_queuecommand, they are leftovers from previous paranoia about wrong pointers between data structures. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] zfcp: Remove unused payload field from zfcp_dbf_san_recordChristof Schmitt1-2/+2
Remove the unused payload field from the struct zfcp_dbf_san_record, saving some space in the SAN trace. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] zfcp: Remove two FIXME commentsChristof Schmitt2-2/+2
On a link down, the adapter reopen is not strictly necessary, but it helps flushing pending requests as quickly as possible. Add a comment mentioning this. qdio returning a problem on the response queue is an unlikely event. The recovery mentioned in the comment might resolve it, so implement it. This also has the advantage that it creates an entry in the recovery trace to see if and when this is occurring. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] zfcp: Move FSF request tracking code to new fileChristof Schmitt8-98/+203
Move the code for tracking FSF requests to new file to have this code in one place. The functions for adding and removing requests on the I/O path are already inline. The alloc and free functions are only called once, so it does not hurt to inline them and add them to the same file. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17[SCSI] zfcp: Remove function zfcp_reqlist_find_safeChristof Schmitt4-41/+29
Always use the FSF request id as a reference to the FSF request. With this change the function zfcp_reqlist_find_safe is no longer needed and can be removed. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-16Merge branch 'master' of ↵David S. Miller15-62/+105
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds1-5/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla2xxx: Obtain proper host structure during response-queue processing. [SCSI] compat_ioct: fix bsg SG_IO [SCSI] qla2xxx: make msix interrupt handler safe for irq [SCSI] zfcp: Report FC BSG errors in correct field [SCSI] mptfusion : mptscsih_abort return value should be SUCCESS instead of value 0.
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack2-2/+2
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09[S390] qdio: prevent call trace if CHPID is offlineJan Glauber1-0/+2
If a CHPID is offline during a device shutdown the ccw_device_halt|clear may fail and the qdio device stays in state STOPPED until the shutdown is finished. If an interrupt occurs before the device is set to INACTIVE the STOPPED state triggers a WARN_ON in the interrupt handler. Prevent this WARN_ON by catching the STOPPED state in the interrupt handler. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-09[S390] qdio: continue polling for buffer state ERRORUrsula Braun1-1/+1
Inbound traffic handling may hang if next buffer to check is in state ERROR, polling is stopped and the final check for further available inbound buffers disregards buffers in state ERROR. This patch includes state ERROR when checking availability of more inbound buffers. Cc: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-08[SCSI] zfcp: Report FC BSG errors in correct fieldSwen Schillig1-5/+4
The status FC_CTELS_STATUS_REJECT for all FC BSG errors is not appropriate. Instead, report -EIO in the result field if there was a problem in zfcp with the FC BSG request. If the request is good from our point of view, report result 0, status FC_CTELS_STATUS_OK and let userspace read the Accept or Reject from the payload (as documented in scsi_bsg_fc.h). Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds7-41/+81
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] aic79xx: check for non-NULL scb in ahd_handle_nonpkt_busfree [SCSI] zfcp: Set hardware timeout as requested by BSG request. [SCSI] zfcp: Introduce bsg_timeout callback. [SCSI] scsi_transport_fc: Allow LLD to reset FC BSG timeout [SCSI] zfcp: add missing compat ptr conversion [SCSI] zfcp: Fix linebreak in hba trace [SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG request [SCSI] qla2xxx: Update version number to 8.03.01-k10. [SCSI] fc-transport: Use packed modifier for fc_bsg_request structure. [SCSI] qla2xxx: Perform fast mailbox read of flash regardless of size nor address alignment. [SCSI] qla2xxx: Correct FCP2 recovery handling. [SCSI] scsi_lib: Fix bug in completion of bidi commands [SCSI] mptsas: Fix issue with chain pools allocation on katmai [SCSI] aacraid: fix File System going into read-only mode [SCSI] lpfc: fix file permissions
2010-01-27[S390] zcrypt: Do not remove coprocessor for error 8/72Felix Beck2-0/+4
In a case where the number of the input data is bigger than the modulus of the key, the coprocessor adapters will report an 8/72 error. This case is not caught yet, thus the adapter will be taken offline. To prevent this, we return an -EINVAL instead. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] sclp_vt220: set initial terminal window sizeHendrik Brueckner1-0/+4
When opening a SCLP VT220 terminal, the terminal window size is not initialized (defaults to zero). Since the SCLP VT220 terminal supports only 80x24, explicitly set the window size to prevent (n)curses applications from guessing the default setting. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-27[S390] dasd: fix possible NULL pointer errorsStefan Haberland4-15/+9
Fix possible NULL pointer in DASD messages and correct discipline checking. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-25net: use helpers to access uc list V2Jiri Pirko1-1/+1
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23Merge branch 'master' of ↵David S. Miller16-352/+248
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-01-17[SCSI] zfcp: Set hardware timeout as requested by BSG request.Swen Schillig4-16/+22
The hardware used with zfcp provides a timer for CT and ELS requests instead of an abort capability for these commands. To correctly handle the FC BSG timeouts, pass the timeout from the BSG requests to the hardware. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] zfcp: Introduce bsg_timeout callback.Swen Schillig3-0/+8
Introduce a zfcp callback for timeouts triggered from FC BSG. With zfcp, the underlying hardware cannot abort CT or ELS requests, so there is nothing to do when the block layer timeout expires. To avoid interference with the block layer timeout, simply indicate that the block layer timer should be reset. The timer running in the hardware for the pending CT or ELS request will return the request when it expires. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] zfcp: add missing compat ptr conversionHeiko Carstens1-2/+7
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] zfcp: Fix linebreak in hba traceChristof Schmitt1-1/+1
Advance the correct pointer when inserting the linebreak for the HBA trace. It was missing in the output since the pointer to the output buffer was never advanced, and the linebreak character was overwritten later. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] zfcp: Issue zfcp_fc_wka_port_put after FC CT BSG requestChristof Schmitt1-22/+43
The patch "zfcp: Simplify handling of ct and els requests" accidentally removed the call to zfcp_fc_wka_port_put for FC CT BSG requests, thus not issuing a "close" request for the WKA ports. Introduce a CT specific handler to first call zfcp_fc_wka_port_put and then continue with the generic handler when returning from FC CT BSG requests. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-13qeth: default BLKT values for new OSA/3 hardwareEinar Lueck2-18/+29
Set default BLKT values for new OSA/3 hardware. Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13qeth: avoid recovery during device online settingUrsula Braun2-3/+0
If a qeth device is set online, several initialisation steps are performed. If a failure in one of these steps occurs, the qeth device is reset into DOWN state. If due to the failure a qeth recovery is scheduled and started in another thread, this might cause all kinds of conflicts, even a kernel panic. The patch forbids scheduling of a qeth recovery while online processing is performed till the card is in state SOFTSETUP. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13qeth: HiperSockets Network Traffic AnalyzerUrsula Braun8-86/+336
New feature to trace HiperSockets network traffic for debugging purposes. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13[S390] tape_char: add missing compat_ptr conversionHeiko Carstens1-3/+15
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] zcrypt: add sanity check before copy_from_user()Heiko Carstens1-1/+3
It's not obvious that copy_from_user() is called with a sane length parameter here. Even though it currently seems to be correct better add a check to prevent stack corruption / exploits. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] con3215: remove empty ioctl functionHeiko Carstens1-17/+0
...instead of adding a compat ioctl function which would do nothing as well. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] dasd: add proper compat pointer conversion for symmetrix ioctlHeiko Carstens1-5/+9
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] tape_block: remove ioctl functionHeiko Carstens1-39/+0
This is just a complicated construct which always returns -EINVAL. Just remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] fs3270: add missing compat ptr conversionHeiko Carstens1-6/+11
Add missing compat ptr conversion including two additional whitespace changes that aren't worth a separate patch. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] vmcp: add missing compat ptr conversionHeiko Carstens1-3/+9
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] cio: add missing compat ptr conversionHeiko Carstens1-8/+15
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-13[S390] dasd: add missing compat ptr conversionHeiko Carstens1-5/+9
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) sky2: Fix oops in sky2_xmit_frame() after TX timeout Documentation/3c509: document ethtool support af_packet: Don't use skb after dev_queue_xmit() vxge: use pci_dma_mapping_error to test return value netfilter: ebtables: enforce CAP_NET_ADMIN e1000e: fix and commonize code for setting the receive address registers e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e: perform 10/100 adaptive IFS only on parts that support it e1000e: don't accumulate PHY statistics on PHY read failure e1000e: call pci_save_state() after pci_restore_state() netxen: update version to 4.0.72 netxen: fix set mac addr netxen: fix smatch warning netxen: fix tx ring memory leak tcp: update the netstamp_needed counter when cloning sockets TI DaVinci EMAC: Handle emac module clock correctly. dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips ixgbe: Fix compiler warning about variable being used uninitialized netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() mv643xx_eth: don't include cache padding in rx desc buffer size ... Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
2010-01-10Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_cmds.h include/linux/sysctl.h
2010-01-07claw: use "claw" as root device nameUrsula Braun1-1/+1
Claw module cannot be loaded together with qeth, because "qeth" has been errorneously used as root device name. It is changed into "claw". Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-04[S390] qdio: convert global statistics to per-device statsJan Glauber7-265/+177
Revamp the qdio performance statistics and move them from procfs to debugfs using the seq_file interface. Since the statistics are not intended for the general user the removal of /proc/qdio_perf should not surprise anyone. The per device statistics are disabled by default, writing 1 to /<debugfs mountpoint>/qdio/<device bus ID>/statistics enables the statistics for the given device. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-29drivers/s390/net/qeth_l2_main.c: use %pM to shown MAC addressH Hartley Sweeten1-18/+6
Use the %pM kernel extension to display the MAC address. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-18[S390] Use strim instead of strstrip to avoid false warnings.Heiko Carstens1-1/+1
Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] qdio: add counter for input queue full conditionJan Glauber3-1/+5
Add a counter to the qdio performance statistics that indicates that no free buffers were left in the input queue. If the counter gets increased it means that the qdio adapter filled all available buffers and possibly had more buffers ready but could not transmit them. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] qdio: remove superfluous log entries and WARN_ONs.Jan Glauber1-9/+1
* Don't write debug feature log entries for sl, slsb and sbal since these elements can be located from the qdio_q pointer which is also logged. * Convert WARN_ON for wrong alignment of sbal to BUG_ON. * Remove WARN_ON's for wrong alignment of q / qib / slib since these alignments should be guaranteed by kmem_cache_alloc alignment / struct aligned attribute / __get_free_page. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] cio: fix channel path varyPeter Oberparleiter3-14/+19
Channel path vary is currently broken: channel paths which are varied offline are still used by Linux. The reason for this is that: * the path mask indicating which paths of an I/O device can be used is reset by each internal I/O request * the logic that checks if a path group is already in its designated target state incorrectly interprets the result "is correctly set" as "is correctly set and available" Fix this by resetting the path mask only for internal I/O requests which affect the path mask and by correcting the pgid check logic. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] drivers: Correct size given to memsetJulia Lawall1-2/+2
Memset should be given the size of the structure, not the size of the pointer. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; T *x; expression E; @@ memset(x, E, sizeof( + * x)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] tape: Add pr_fmt() macro to all tape source filesMichael Holzheu8-0/+18
Without defining the pr_fmt() macro, the "tape: " prefix will not be printed when using the pr_xxx printk macros. This patch adds the missing definitions. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] tty: PTR_ERR return of wrong pointer in fs3270_open()Roel Kluin1-1/+1
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] dasd: PTR_ERR return of wrong pointer inRoel Kluin1-1/+1
Return the PTR_ERR of the correct pointer. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] dasd: move dasd-diag kmsg to dasdStefan Haberland1-20/+22
The DIAG discipline does not have a own driver name. It shows up as dasd-eckd or dasd-fba. So messages for dasd-diag are moved to the generic dasd part. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-12-18[S390] cio: fix drvdata usage for the console subchannelSebastian Ott1-0/+1
Using dev_set_drvdata prior to device_register will force the driver core to kmalloc its private data. Since we use this for the console subchannel lets set the drvdata before taking the subchannels spinlock. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 17:22:07 +0000