summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07s390/qeth: fix L2 header access in qeth_l3_osa_features_check()Julian Wiedmann1-1/+1
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade199391 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix locking for discipline setup / removalJulian Wiedmann3-10/+7
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07s390/qeth: fix deadlock during recoveryJulian Wiedmann4-18/+34
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc68b9 ("qeth: serialize sysfs-triggered device configurations") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-24Merge tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+20
Pull block fixes from Jens Axboe: "A few stragglers in here, but mostly just straight fixes. In particular: - Set of rnbd fixes for issues around changes for the merge window (Gioh, Jack, Md Haris Iqbal) - iocost tracepoint addition (Baolin) - Copyright/maintainers update (Christoph) - Remove old blk-mq fast path CPU warning (Daniel) - loop max_part fix (Josh) - Remote IPI threaded IRQ fix (Sebastian) - dasd stable fixes (Stefan) - bcache merge window fixup and style fixup (Yi, Zheng)" * tag 'block-5.11-2020-12-23' of git://git.kernel.dk/linux-block: md/bcache: convert comma to semicolon bcache:remove a superfluous check in register_bcache block: update some copyrights block: remove a pointless self-reference in block_dev.c MAINTAINERS: add fs/block_dev.c to the block section blk-mq: Don't complete on a remote CPU in force threaded mode s390/dasd: fix list corruption of lcu list s390/dasd: fix list corruption of pavgroup group list s390/dasd: prevent inconsistent LCU device data s390/dasd: fix hanging device offline processing blk-iocost: Add iocg idle state tracepoint nbd: Respect max_part for all partition scans block/rnbd-clt: Does not request pdu to rtrs-clt block/rnbd-clt: Dynamically allocate sglist for rnbd_iu block/rnbd: Set write-back cache and fua same to the target device block/rnbd: Fix typos block/rnbd-srv: Protect dev session sysfs removal block/rnbd-clt: Fix possible memleak block/rnbd-clt: Get rid of warning regarding size argument in strlcpy blk-mq: Remove 'running from the wrong CPU' warning
2020-12-18Merge tag 's390-5.11-2' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "This is mainly to decouple udelay() and arch_cpu_idle() and simplify both of them. Summary: - Always initialize kernel stack backchain when entering the kernel, so that unwinding works properly. - Fix stack unwinder test case to avoid rare interrupt stack corruption. - Simplify udelay() and just let it busy loop instead of implementing a complex logic. - arch_cpu_idle() cleanup. - Some other minor improvements" * tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: convert comma to semicolon s390/idle: allow arch_cpu_idle() to be kprobed s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle() s390/idle: merge enabled_wait() and arch_cpu_idle() s390/delay: remove udelay_simple() s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK s390/delay: simplify udelay s390/test_unwind: use timer instead of udelay s390/test_unwind: fix CALL_ON_STACK tests s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced s390: always clear kernel stack backchain before calling functions
2020-12-17s390/dasd: fix list corruption of lcu listStefan Haberland1-1/+1
In dasd_alias_disconnect_device_from_lcu the device is removed from any list on the LCU. Afterwards the LCU is removed from the lcu list if it does not contain devices any longer. The lcu->lock protects the lcu from parallel updates. But to cancel all workers and wait for completion the lcu->lock has to be unlocked. If two devices are removed in parallel and both are removed from the LCU the first device that takes the lcu->lock again will delete the LCU because it is already empty but the second device also tries to free the LCU which leads to a list corruption of the lcu list. Fix by removing the device right before the lcu is checked without unlocking the lcu->lock in between. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: fix list corruption of pavgroup group listStefan Haberland1-0/+1
dasd_alias_add_device() moves devices to the active_devices list in case of a scheduled LCU update regardless if they have previously been in a pavgroup or not. Example: device A and B are in the same pavgroup. Device A has already been in a pavgroup and the private->pavgroup pointer is set and points to a valid pavgroup. While going through dasd_add_device it is moved from the pavgroup to the active_devices list. In parallel device B might be removed from the same pavgroup in remove_device_from_lcu() which in turn checks if the group is empty and deletes it accordingly because device A has already been removed from there. When now device A enters remove_device_from_lcu() it is tried to remove it from the pavgroup again because the pavgroup pointer is still set and again the empty group will be cleaned up which leads to a list corruption. Fix by setting private->pavgroup to NULL in dasd_add_device. If the device has been the last device on the pavgroup an empty pavgroup remains but this will be cleaned up by the scheduled lcu_update which iterates over all existing pavgroups. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: prevent inconsistent LCU device dataStefan Haberland1-0/+9
Prevent _lcu_update from adding a device to a pavgroup if the LCU still requires an update. The data is not reliable any longer and in parallel devices might have been moved on the lists already. This might lead to list corruptions or invalid PAV grouping. Only add devices to a pavgroup if the LCU is up to date. Additional steps are taken by the scheduled lcu update. Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1") Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-17s390/dasd: fix hanging device offline processingStefan Haberland1-1/+9
For an LCU update a read unit address configuration IO is required. This is started using sleep_on(), which has early exit paths in case the device is not usable for IO. For example when it is in offline processing. In those cases the LCU update should fail and not be retried. Therefore lcu_update_work checks if EOPNOTSUPP is returned or not. Commit 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration") accidentally removed the EOPNOTSUPP return code from read_unit_address_configuration(), which in turn might lead to an endless loop of the LCU update in offline processing. Fix by returning EOPNOTSUPP again if the device is not able to perform the request. Fixes: 41995342b40c ("s390/dasd: fix endless loop after read unit address configuration") Cc: stable@vger.kernel.org #5.3 Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-16Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-0/+30
Pull VFIO updates from Alex Williamson: - Fix uninitialized list walk in error path (Eric Auger) - Use io_remap_pfn_range() (Jason Gunthorpe) - Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy) - Enable mdev request interrupt with CCW support (Eric Farman) - Enable interface to iommu_domain from vfio_group (Lu Baolu) * tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Add vfio_group_iommu_domain() vfio-ccw: Wire in the request callback vfio-mdev: Wire in a request handler for mdev parent vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU vfio-pci: Use io_remap_pfn_range() for PCI IO memory vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
2020-12-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds7-2/+91
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, qla2xxx, smartpqi, target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major power management rework and a load of assorted minor updates. There are a few core updates (formatting fixes being the big one) but nothing major this cycle" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: mpt3sas: Update driver version to 36.100.00.00 scsi: mpt3sas: Handle trigger page after firmware update scsi: mpt3sas: Add persistent MPI trigger page scsi: mpt3sas: Add persistent SCSI sense trigger page scsi: mpt3sas: Add persistent Event trigger page scsi: mpt3sas: Add persistent Master trigger page scsi: mpt3sas: Add persistent trigger pages support scsi: mpt3sas: Sync time periodically between driver and firmware scsi: qla2xxx: Update version to 10.02.00.104-k scsi: qla2xxx: Fix device loss on 4G and older HBAs scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry scsi: qla2xxx: Fix the call trace for flush workqueue scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines scsi: qla2xxx: Handle aborts correctly for port undergoing deletion scsi: qla2xxx: Fix N2N and NVMe connect retry failure scsi: qla2xxx: Fix FW initialization error on big endian machines scsi: qla2xxx: Fix crash during driver load on big endian machines scsi: qla2xxx: Fix compilation issue in PPC systems scsi: qla2xxx: Don't check for fw_started while posting NVMe command scsi: qla2xxx: Tear down session if FW say it is down ...
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds10-78/+520
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-16Merge tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds4-31/+20
Pull block updates from Jens Axboe: "Another series of killing more code than what is being added, again thanks to Christoph's relentless cleanups and tech debt tackling. This contains: - blk-iocost improvements (Baolin Wang) - part0 iostat fix (Jeffle Xu) - Disable iopoll for split bios (Jeffle Xu) - block tracepoint cleanups (Christoph Hellwig) - Merging of struct block_device and hd_struct (Christoph Hellwig) - Rework/cleanup of how block device sizes are updated (Christoph Hellwig) - Simplification of gendisk lookup and removal of block device aliasing (Christoph Hellwig) - Block device ioctl cleanups (Christoph Hellwig) - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig) - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig) - sbitmap improvements (Pavel Begunkov) - Hybrid polling fix (Pavel Begunkov) - bvec iteration improvements (Pavel Begunkov) - Zone revalidation fixes (Damien Le Moal) - blk-throttle limit fix (Yu Kuai) - Various little fixes" * tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits) blk-mq: fix msec comment from micro to milli seconds blk-mq: update arg in comment of blk_mq_map_queue blk-mq: add helper allocating tagset->tags Revert "block: Fix a lockdep complaint triggered by request queue flushing" nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class blk-mq: add new API of blk_mq_hctx_set_fq_lock_class block: disable iopoll for split bio block: Improve blk_revalidate_disk_zones() checks sbitmap: simplify wrap check sbitmap: replace CAS with atomic and sbitmap: remove swap_lock sbitmap: optimise sbitmap_deferred_clear() blk-mq: skip hybrid polling if iopoll doesn't spin blk-iocost: Factor out the base vrate change into a separate function blk-iocost: Factor out the active iocgs' state check into a separate function blk-iocost: Move the usage ratio calculation to the correct place blk-iocost: Remove unnecessary advance declaration blk-iocost: Fix some typos in comments blktrace: fix up a kerneldoc comment block: remove the request_queue to argument request based tracepoints ...
2020-12-16s390/zcrypt: convert comma to semicolonZheng Yongjun2-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-16s390/delay: remove udelay_simple()Heiko Carstens1-1/+1
udelay_simple() callers can make use of the now simplified udelay() implementation. No need to keep it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-15Merge tag 'net-next-5.11' of ↵Linus Torvalds16-430/+489
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-14Merge tag 's390-5.11-1' of ↵Linus Torvalds35-1037/+355
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for the hugetlb_cma command line option to allocate gigantic hugepages using CMA - Add arch_get_random_long() support. - Add ap bus userspace notifications. - Increase default size of vmalloc area to 512GB and otherwise let it increase dynamically by the size of physical memory. This should fix all occurrences where the vmalloc area was not large enough. - Completely get rid of set_fs() (aka select SET_FS) and rework address space handling while doing that; making address space handling much more simple. - Reimplement getcpu vdso syscall in C. - Add support for extended SCLP responses (> 4k). This allows e.g. to handle also potential large system configurations. - Simplify KASAN by removing 3-level page table support and only supporting 4-levels from now on. - Improve debug-ability of the kernel decompressor code, which now prints also stack traces and symbols in case of problems to the console. - Remove more power management leftovers. - Other various fixes and improvements all over the place. * tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits) s390/mm: add support to allocate gigantic hugepages using CMA s390/crypto: add arch_get_random_long() support s390/smp: perform initial CPU reset also for SMT siblings s390/mm: use invalid asce for user space when switching to init_mm s390/idle: fix accounting with machine checks s390/idle: add missing mt_cycles calculation s390/boot: add build-id to decompressor s390/kexec_file: fix diag308 subcode when loading crash kernel s390/cio: fix use-after-free in ccw_device_destroy_console s390/cio: remove pm support from ccw bus driver s390/cio: remove pm support from css-bus driver s390/cio: remove pm support from IO subchannel drivers s390/cio: remove pm support from chsc subchannel driver s390/vmur: remove unused pm related functions s390/tape: remove unsupported PM functions s390/cio: remove pm support from eadm-sch drivers s390: remove pm support from console drivers s390/dasd: remove unused pm related functions s390/zfcp: remove pm support from zfcp driver s390/ap: let bus_register() add the AP bus sysfs attributes ...
2020-12-09s390/cio: fix use-after-free in ccw_device_destroy_consoleQinglang Miao1-2/+2
Use of sch->dev reference after the put_device() call could trigger the use-after-free bugs. Fix this by simply adjusting the position of put_device. Fixes: 37db8985b211 ("s390/cio: add basic protected virtualization support") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> [vneethv@linux.ibm.com: Slight modification in the commit-message] Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-07s390/qeth: make qeth_qdio_handle_aob() more robustJulian Wiedmann1-0/+1
When qeth_qdio_handle_aob() frees dangling allocations in the notified TX buffer, there are rare tear-down cases where qeth_drain_output_queue() would later call qeth_clear_output_buffer() for the same buffer - and thus end up walking the buffer a second time to check for dangling kmem_cache allocations. Luckily current code previously scrubs such a buffer, so qeth_clear_output_buffer() would find buf->buffer->element[i].addr as NULL and not do anything. But this is fragile, and we can easily improve it by consistently clearing the ->is_header flag after freeing the allocation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07s390/qeth: remove QETH_QDIO_BUF_HANDLED_DELAYED stateJulian Wiedmann2-5/+2
Reuse the QETH_QDIO_BUF_EMPTY state to indicate that a TX buffer has been completed with a QAOB notification, and may be cleaned up by qeth_cleanup_handled_pending(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07s390/qeth: don't replace a fully completed async TX bufferJulian Wiedmann1-38/+51
For TX buffers that require an additional async notification via QAOB, the TX completion code can now manage all the necessary processing if the notification has already occurred (or is occurring concurrently). In such cases we can avoid replacing the metadata that is associated with the buffer's slot on the ring, and just keep using the current one. As qeth_clear_output_buffer() will also handle any kmem cache-allocated memory that was mapped into the TX buffer, qeth_qdio_handle_aob() doesn't need to worry about it. While at it, also remove the unneeded forward declaration for qeth_init_qdio_out_buf(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07s390/qeth: use dev->groups for common sysfs attributesJulian Wiedmann9-76/+30
All qeth devices have a minimum set of sysfs attributes, and non-OSN devices share a group of additional attributes. Depending on whether the device is forced to use a specific discipline, the device_type then specifies further attributes. Shift the common attributes into dev->groups, so that the device_type only contains the discipline-specific attributes. This avoids exposing the common attributes to the disciplines, and nicely cleans up our sysfs code. While replacing the qeth_l*_*_device_attributes() helpers, switch from sysfs_*_groups() to the more generic device_*_groups(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07s390/ccwgroup: use bus->dev_groups for bus-based sysfs attributesJulian Wiedmann1-9/+3
Bus drivers have their own way of describing the sysfs attributes that all devices on a bus should provide. Switch ccwgroup_attr_groups over to use bus->dev_groups, and thus free up dev->groups for usage by the ccwgroup device drivers. While adjusting the attribute naming, use ATTRIBUTE_GROUPS() to get rid of some boilerplate code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-07s390/qeth: don't call INIT_LIST_HEAD() on iob's list entryJulian Wiedmann2-6/+5
INIT_LIST_HEAD() only needs to be called on actual list heads. While at it clarify the naming of the field. Suggested-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-04block: remove the request_queue to argument request based tracepointsChristoph Hellwig1-2/+1
The request_queue can trivially be derived from the request. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-03vfio-ccw: Wire in the request callbackEric Farman2-0/+30
The device is being unplugged, so pass the request to userspace to ask for a graceful cleanup. This should free up the thread that would otherwise loop waiting for the device to be fully released. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-12-02s390/cio: remove pm support from ccw bus driverVineeth Vijayan5-258/+2
As part of removing broken pm-support from s390 arch, remove the pm callbacks from ccw-bus driver.The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from css-bus driverVineeth Vijayan2-139/+1
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove the unused pm callbacks from css-bus driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from IO subchannel driversVineeth Vijayan1-14/+0
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove these unused pm callbacks from io-subchannel drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from chsc subchannel driverVineeth Vijayan1-29/+0
As part of removing the broken pm-support from s390 arch, remove the pm-calls from chsc subchannel driver. The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/vmur: remove unused pm related functionsVineeth Vijayan1-24/+0
The Power-management related functions are unused since 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove them from the unit-record device driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/tape: remove unsupported PM functionsVineeth Vijayan4-53/+0
The power-management related functions are unused since 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove them from tape drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from eadm-sch driversVineeth Vijayan1-13/+0
The 'commit 394216275c7d ("s390: remove broken hibernate / power management support")' removes the pm-support. Remove the unused functions in eadm-sch drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390: remove pm support from console driversVineeth Vijayan4-150/+15
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove the unsued pm functions from the console drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/dasd: remove unused pm related functionsVineeth Vijayan4-198/+2
The power-management related functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove them from dasd drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/zfcp: remove pm support from zfcp driverVineeth Vijayan4-80/+4
As part of removing the power management support from s390 arch, remove PM callbacks from the scsi/zfcp driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-01s390/ctcm: Use GFP_ATOMIC in ctcmpc_tx().Sebastian Andrzej Siewior2-6/+1
gfp_type() uses in_interrupt() to figure out the correct GFP mask. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. ctcmpc_tx() is used as net_device_ops::ndo_start_xmit. This callback is invoked with disabled bottom halves. Use GFP_ATOMIC for memory allocation in ctcmpc_tx(). Remove gfp_type() since the last user is gone. Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01s390/ctcm: Use GFP_KERNEL in add_channel().Sebastian Andrzej Siewior1-1/+1
gfp_type() uses in_interrupt() to figure out the correct GFP mask. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The memory allocation of `ch' a few lines above is using GFP_KERNEL, also an allocation a few lines later is using GFP_KERNEL. Use GFP_KERNEL for the memory allocation. Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01s390/ctcm: Use explicit allocation mask in ctcmpc_unpack_skb().Sebastian Andrzej Siewior1-1/+1
gfp_type() uses in_interrupt() to figure out the correct GFP mask. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The call chain of ctcmpc_unpack_skb(): ctcmpc_bh() -> ctcmpc_unpack_skb() ctcmpc_bh() is a tasklet handler so GFP_ATOMIC is needed. Use GFP_ATOMIC as allocation type in ctcmpc_unpack_skb(). Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01s390/ctcm: Avoid temporary allocation of struct pdu.Sebastian Andrzej Siewior1-25/+8
The size of struct pdu is 8 byte. The memory is allocated, initialized, used and deallocated a few lines later. It is more efficient to avoid the allocation/free dance and assign the values directly to skb's data part instead of using memcpy() for it. Avoid an allocation of struct pdu and use the resulting skb pointer instead. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [jwi: Fix-up the pdu_offset, adjust skb->len for the pushed length. Reflow the commit msg.] Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01s390/ctcm: Avoid temporary allocation of struct qllc.Sebastian Andrzej Siewior1-17/+4
The size of struct qllc is 2 byte. The memory for is allocated, initialized, used and deallocated a few lines later. It is more efficient to avoid the allocation/free dance and assign the values directly to skb's data part instead of using memcpy() for it. Avoid an allocation of struct qllc and use the resulting skb pointer instead. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [jwi: remove a newline, reflow the commit msg] Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01s390/ctcm: Avoid temporary allocation of struct th_header and th_sweep.Sebastian Andrzej Siewior3-53/+9
The size of struct th_header is 8 byte and the size of struct th_sweep is 16 byte. The memory for is allocated, initialized, used and deallocated a few lines later. It is more efficient to avoid the allocation/free dance and assign the values directly to skb's data part instead of using memcpy() for it. Avoid an allocation of struct th_sweep/th_header and use the resulting skb pointer instead. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [jwi: use skb_put_zero(), instead of skb_put() + memset to 0] Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01block: stop using bdget_disk for partition 0Christoph Hellwig1-3/+2
We can just dereference the point in struct gendisk instead. Also remove the now unused export. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: switch disk_part_iter_* to use a struct block_deviceChristoph Hellwig1-4/+4
Switch the partition iter infrastructure to iterate over block_device references instead of hd_struct ones mostly used to get at the block_device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove the nr_sects field in struct hd_structChristoph Hellwig1-3/+1
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-30s390/ap: let bus_register() add the AP bus sysfs attributesJulian Wiedmann1-29/+24
Instead of creating the sysfs attributes for the AP bus by hand, describe them in .bus_groups and let the driver core handle it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-my: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-47/+68
Trivial conflict in CAN, keep the net-next + the byteswap wrapper. Conflicts: drivers/net/can/usb/gs_usb.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27Merge tag 'net-5.10-rc6' of ↵Linus Torvalds3-47/+62
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc6, including fixes from the WiFi driver, and CAN subtrees. Current release - regressions: - gro_cells: reduce number of synchronize_net() calls - ch_ktls: release a lock before jumping to an error path Current release - always broken: - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header Previous release - regressions: - net/tls: fix missing received data after fast remote close - vsock/virtio: discard packets only when socket is really closed - sock: set sk_err to ee_errno on dequeue from errq - cxgb4: fix the panic caused by non smac rewrite Previous release - always broken: - tcp: fix corner cases around setting ECN with BPF selection of congestion control - tcp: fix race condition when creating child sockets from syncookies on loopback interface - usbnet: ipheth: fix connectivity with iOS 14 - tun: honor IOCB_NOWAIT flag - net/packet: fix packet receive on L3 devices without visible hard header - devlink: Make sure devlink instance and port are in same net namespace - net: openvswitch: fix TTL decrement action netlink message format - bonding: wait for sysfs kobject destruction before freeing struct slave - net: stmmac: fix upstream patch applied to the wrong context - bnxt_en: fix return value and unwind in probe error paths Misc: - devlink: add extra layer of categorization to the reload stats uAPI before it's released" * tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) sock: set sk_err to ee_errno on dequeue from errq mptcp: fix NULL ptr dereference on bad MPJ net: openvswitch: fix TTL decrement action netlink message format can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0 can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given can: gs_usb: fix endianess problem with candleLight firmware ch_ktls: lock is not freed net/tls: Protect from calling tls_dev_del for TLS RX twice devlink: Make sure devlink instance and port are in same net namespace devlink: Hold rtnl lock while reading netdev attributes ptp: clockmatrix: bug fix for idtcm_strverscmp enetc: Let the hardware auto-advance the taprio base-time of 0 gro_cells: reduce number of synchronize_net() calls net: stmmac: fix incorrect merge of patch upstream ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init Documentation: netdev-FAQ: suggest how to post co-dependent series ibmvnic: enhance resetting status check during module exit ...
2020-11-20s390/qeth: fix tear down of async TX buffersJulian Wiedmann1-6/+0
When qeth_iqd_tx_complete() detects that a TX buffer requires additional async completion via QAOB, it might fail to replace the queue entry's metadata (and ends up triggering recovery). Assume now that the device gets torn down, overruling the recovery. If the QAOB notification then arrives before the tear down has sufficiently progressed, the buffer state is changed to QETH_QDIO_BUF_HANDLED_DELAYED by qeth_qdio_handle_aob(). The tear down code calls qeth_drain_output_queue(), where qeth_cleanup_handled_pending() will then attempt to replace such a buffer _again_. If it succeeds this time, the buffer ends up dangling in its replacement's ->next_pending list ... where it will never be freed, since there's no further call to qeth_cleanup_handled_pending(). But the second attempt isn't actually needed, we can simply leave the buffer on the queue and re-use it after a potential recovery has completed. The qeth_clear_output_buffer() in qeth_drain_output_queue() will ensure that it's in a clean state again. Fixes: 72861ae792c2 ("qeth: recovery through asynchronous delivery") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20s390/qeth: fix af_iucv notification raceJulian Wiedmann2-24/+58
The two expected notification sequences are 1. TX_NOTIFY_PENDING with a subsequent TX_NOTIFY_DELAYED_*, when our TX completion code first observed the pending TX and the QAOB then completes at a later time; or 2. TX_NOTIFY_OK, when qeth_qdio_handle_aob() picked up the QAOB completion before our TX completion code even noticed that the TX was pending. But as qeth_iqd_tx_complete() and qeth_qdio_handle_aob() can run concurrently, we may end up with a race that results in a sequence of TX_NOTIFY_DELAYED_* followed by TX_NOTIFY_PENDING. Which would confuse the af_iucv code in its tracking of pending transmits. Rework the notification code, so that qeth_qdio_handle_aob() defers its notification if the TX completion code is still active. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>