summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-03-13Merge tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-blockLinus Torvalds3-12/+193
Pull block fixes from Jens Axboe: "A few fixes that should go into this release. This contains: - Fix for a corruption issue with the s390 dasd driver (Stefan) - Fixup/improvement for the flush insertion change that we had in this series (Ming) - Fix for the partition suppor for host aware zoned devices (Shin'ichiro) - Fix incorrect blk-iocost comparison (Tejun) The diffstat looks large, but that's a) mostly dasd, and b) the flush fix from Ming adds a big comment" * tag 'block-5.6-2020-03-13' of git://git.kernel.dk/linux-block: block: Fix partition support for host aware zoned block devices blk-mq: insert flush request to the front of dispatch queue s390/dasd: fix data corruption for thin provisioned devices blk-iocost: fix incorrect vtime comparison in iocg_is_idle()
2020-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds6-70/+130
Pull networking fixes from David Miller: "It looks like a decent sized set of fixes, but a lot of these are one liner off-by-one and similar type changes: 1) Fix netlink header pointer to calcular bad attribute offset reported to user. From Pablo Neira Ayuso. 2) Don't double clear PHY interrupts when ->did_interrupt is set, from Heiner Kallweit. 3) Add missing validation of various (devlink, nl802154, fib, etc.) attributes, from Jakub Kicinski. 4) Missing *pos increments in various netfilter seq_next ops, from Vasily Averin. 5) Missing break in of_mdiobus_register() loop, from Dajun Jin. 6) Don't double bump tx_dropped in veth driver, from Jiang Lidong. 7) Work around FMAN erratum A050385, from Madalin Bucur. 8) Make sure ARP header is pulled early enough in bonding driver, from Eric Dumazet. 9) Do a cond_resched() during multicast processing of ipvlan and macvlan, from Mahesh Bandewar. 10) Don't attach cgroups to unrelated sockets when in interrupt context, from Shakeel Butt. 11) Fix tpacket ring state management when encountering unknown GSO types. From Willem de Bruijn. 12) Fix MDIO bus PHY resume by checking mdio_bus_phy_may_suspend() only in the suspend context. From Heiner Kallweit" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) net: systemport: fix index check to avoid an array out of bounds access tc-testing: add ETS scheduler to tdc build configuration net: phy: fix MDIO bus PM PHY resuming net: hns3: clear port base VLAN when unload PF net: hns3: fix RMW issue for VLAN filter switch net: hns3: fix VF VLAN table entries inconsistent issue net: hns3: fix "tc qdisc del" failed issue taprio: Fix sending packets without dequeueing them net: mvmdio: avoid error message for optional IRQ net: dsa: mv88e6xxx: Add missing mask of ATU occupancy register net: memcg: fix lockdep splat in inet_csk_accept() s390/qeth: implement smarter resizing of the RX buffer pool s390/qeth: refactor buffer pool code s390/qeth: use page pointers to manage RX buffer pool seg6: fix SRv6 L2 tunnels to use IANA-assigned protocol number net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed net/packet: tpacket_rcv: do not increment ring index on drop sxgbe: Fix off by one in samsung driver strncpy size arg net: caif: Add lockdep expression to RCU traversal primitive MAINTAINERS: remove Sathya Perla as Emulex NIC maintainer ...
2020-03-12s390/dasd: fix data corruption for thin provisioned devicesStefan Haberland3-12/+193
Devices are formatted in multiple of tracks. For an Extent Space Efficient (ESE) volume we get errors when accessing unformatted tracks. In this case the driver either formats the track on the flight for write requests or returns zero data for read requests. In case a request spans multiple tracks, the indication of an unformatted track presented for the first track is incorrectly applied to all tracks covered by the request. As a result, tracks containing data will be handled as empty, resulting in zero data being returned on read, or overwriting existing data with zero on write. Fix by determining the track that gets the NRF error. For write requests only format the track that is surely not formatted. For Read requests all tracks before have returned valid data and should not be touched. All tracks after the unformatted track might be formatted or not. Those are returned to the blocklayer to build a new request. When using alias devices there is a chance that multiple write requests trigger a format of the same track which might lead to data loss. Ensure that a track is formatted only once by maintaining a list of currently processed tracks. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-11s390/qeth: implement smarter resizing of the RX buffer poolJulian Wiedmann4-19/+56
The RX buffer pool is allocated in qeth_alloc_qdio_queues(). A subsequent pool resizing is then handled in a very simple way: first free the current pool, then allocate a new pool of the requested size. There's two ways where this can go wrong: 1. if the resize action happens _before_ the initial pool was allocated, then a subsequent initialization will call qeth_alloc_qdio_queues() and fill the pool with a second(!) set of pages. We consume twice the planned amount of memory. This is easy to fix - just skip the resizing if the queues haven't been allocated yet. 2. if the initial pool was created by qeth_alloc_qdio_queues() but a subsequent resizing fails, then the device has no(!) RX buffer pool. The next initialization will _not_ call qeth_alloc_qdio_queues(), and attempting to back the RX buffers with pages in qeth_init_qdio_queues() will fail. Not very difficult to fix either - instead of re-allocating the whole pool, just allocate/free as many entries to match the desired size. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11s390/qeth: refactor buffer pool codeJulian Wiedmann1-32/+51
In preparation for a subsequent fix, split out helpers to allocate/free individual pool entries. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11s390/qeth: use page pointers to manage RX buffer poolJulian Wiedmann2-19/+18
The RX buffer elements are always backed with full pages, reflect this in the pointer type. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann3-1/+2
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: handle error when backing RX bufferJulian Wiedmann1-4/+9
qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-10s390/qeth: don't reset default_out_queueJulian Wiedmann1-1/+0
When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-29Merge tag 'scsi-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes. Three are in drivers for fairly obvious bugs. The fourth is a set of regressions introduced by the compat_ioctl changes because some of the compat updates wrongly replaced .ioctl instead of .compat_ioctl" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: compat_ioctl: cdrom: Replace .ioctl with .compat_ioctl in four appropriate places scsi: zfcp: fix wrong data and display format of SFP+ temperature scsi: sd_sbc: Fix sd_zbc_report_zones() scsi: libfc: free response frame from GPN_ID
2020-02-24scsi: zfcp: fix wrong data and display format of SFP+ temperatureBenjamin Block2-2/+2
When implementing support for retrieval of local diagnostic data from the FCP channel, the wrong data format was assumed for the temperature of the local SFP+ connector. The Fibre Channel Link Services (FC-LS-3) specification is not clear on the format of the stored integer, and only after consulting the SNIA specification SFF-8472 did we realize it is stored as two's complement. Thus, the used data and display format is wrong, and highly misleading for users when the temperature should drop below 0°C (however unlikely that may be). To fix this, change the data format in `struct fsf_qtcb_bottom_port` from unsigned to signed, and change the printf format string used to generate `zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`. Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com Fixes: a10a61e807b0 ("scsi: zfcp: support retrieval of SFP Data via Exchange Port Data") Fixes: 6028f7c4cd87 ("scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver") Cc: <stable@vger.kernel.org> # 5.5+ Reviewed-by: Jens Remus <jremus@linux.ibm.com> Reviewed-by: Fedor Loshakov <loshakov@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-22Merge tag 's390-5.6-4' of ↵Linus Torvalds8-37/+39
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index
2020-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-18/+14
Pull networking fixes from David Miller: 1) Limit xt_hashlimit hash table size to avoid OOM or hung tasks, from Cong Wang. 2) Fix deadlock in xsk by publishing global consumer pointers when NAPI is finished, from Magnus Karlsson. 3) Set table field properly to RT_TABLE_COMPAT when necessary, from Jethro Beekman. 4) NLA_STRING attributes are not necessary NULL terminated, deal wiht that in IFLA_ALT_IFNAME. From Eric Dumazet. 5) Fix checksum handling in atlantic driver, from Dmitry Bezrukov. 6) Handle mtu==0 devices properly in wireguard, from Jason A. Donenfeld. 7) Fix several lockdep warnings in bonding, from Taehee Yoo. 8) Fix cls_flower port blocking, from Jason Baron. 9) Sanitize internal map names in libbpf, from Toke Høiland-Jørgensen. 10) Fix RDMA race in qede driver, from Michal Kalderon. 11) Fix several false lockdep warnings by adding conditions to list_for_each_entry_rcu(), from Madhuparna Bhowmik. 12) Fix sleep in atomic in mlx5 driver, from Huy Nguyen. 13) Fix potential deadlock in bpf_map_do_batch(), from Yonghong Song. 14) Hey, variables declared in switch statement before any case statements are not initialized. I learn something every day. Get rids of this stuff in several parts of the networking, from Kees Cook. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs. bnxt_en: Improve device shutdown method. net: netlink: cap max groups which will be considered in netlink_bind() net: thunderx: workaround BGX TX Underflow issue ionic: fix fw_status read net: disable BRIDGE_NETFILTER by default net: macb: Properly handle phylink on at91rm9200 s390/qeth: fix off-by-one in RX copybreak check s390/qeth: don't warn for napi with 0 budget s390/qeth: vnicc Fix EOPNOTSUPP precedence openvswitch: Distribute switch variables for initialization net: ip6_gre: Distribute switch variables for initialization net: core: Distribute switch variables for initialization udp: rehash on disconnect net/tls: Fix to avoid gettig invalid tls record bpf: Fix a potential deadlock with bpf_map_do_batch bpf: Do not grab the bucket spinlock by default on htab batch ops ice: Wait for VF to be reset/ready before configuration ice: Don't tell the OS that link is going down ice: Don't reject odd values of usecs set by user ...
2020-02-20s390/qeth: fix off-by-one in RX copybreak checkJulian Wiedmann1-1/+1
The RX copybreak is intended as the _max_ value where the frame's data should be copied. So for frame_len == copybreak, don't build an SG skb. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20s390/qeth: don't warn for napi with 0 budgetJulian Wiedmann1-1/+0
Calling napi->poll() with 0 budget is a legitimate use by netpoll. Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-20s390/qeth: vnicc Fix EOPNOTSUPP precedenceAlexandra Winter1-16/+13
When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19s390/qdio: fill SBALEs with absolute addressesJulian Wiedmann4-18/+19
sbale->addr holds an absolute address (or for some FCP usage, an opaque request ID), and should only be used with proper virt/phys translation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-19s390/qdio: fill SL with absolute addressesJulian Wiedmann2-13/+13
As the comment says, sl->sbal holds an absolute address. qeth currently solves this through wild casting, while zfcp doesn't care. Handle this properly in the code that actually builds the SL. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> [for qdio] Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-17s390/pkey/zcrypt: spelling s/crytp/crypt/Geert Uytterhoeven1-2/+2
Fix typos in a comments. Link: https://lkml.kernel.org/r/20200212084622.9219-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-17s390/cio: use kobj_to_dev() APIchenqiwu1-2/+2
Use kobj_to_dev() API instead of container_of(). Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: chenqiwu <chenqiwu@xiaomi.com> Signed-off-by: chenqiwu <qiwuchen55@gmail.com> Message-Id: <1581688293-17283-1-git-send-email-qiwuchen55@gmail.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-17s390/cio: cio_ignore_proc_seq_next should increase position indexVasily Averin1-2/+3
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206283 Link: https://lore.kernel.org/r/d44c53a7-9bc1-15c7-6d4a-0c10cb9dffce@virtuozzo.com Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-11Merge tag 'vfio-ccw-20200206' of ↵Vasily Gorbik1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into HEAD fix style of SPDX License Identifier * tag 'vfio-ccw-20200206' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw: vfio-ccw: Use the correct style for SPDX License Identifier Link: https://lkml.kernel.org/r/20200206170331.1032-1-cohuck@redhat.com Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-11s390/qdio: don't allocate *aob array with GFP_ATOMICJulian Wiedmann1-1/+1
The only way to reach this allocation is via qdio_establish() qdio_detect_hsicq() qdio_enable_async_operation() and since qdio_establish() uses wait_event_*() just a few lines ealier, we can trust that it certainly is never called from atomic context. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-10s390/qdio: simplify ACK trackingJulian Wiedmann3-24/+14
Current code uses a 'polling' flag to keep track of whether an Input Queue has any ACKed SBALs. QEBSM devices might have multiple ACKed SBALs, and those are tracked separately with 'ack_count'. By also setting ack_count for non-QEBSM devices (to a fixed value of 1), we can use 'ack_count != 0' as replacement for the polling flag. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-10s390/zcrypt: fix card and queue total counter wrapHarald Freudenberger4-16/+18
The internal statistic counters for the total number of requests processed per card and per queue used integers. So they do wrap after a rather huge amount of crypto requests processed. This patch introduces uint64 counters which should hold much longer but still may wrap. The sysfs attributes request_count for card and queue also used only %ld and now display the counter value with %llu. This is not a security relevant fix. The int overflow which happened is not in any way exploitable as a security breach. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-10s390/pkey: fix missing length of protected key on returnHarald Freudenberger1-1/+1
The pkey ioctl call PKEY_SEC2PROTK updates a struct pkey_protkey on return. The protected key is stored in, the protected key type is stored in but the len information was not updated. This patch now fixes this and so the len field gets an update to refrect the actual size of the protected key value returned. Fixes: efc598e6c8a9 ("s390/zcrypt: move cca misc functions to new code file") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reported-by: Christian Rund <RUNDC@de.ibm.com> Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-02-05Merge tag 's390-5.6-2' of ↵Linus Torvalds8-87/+2105
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: "The second round of s390 fixes and features for 5.6: - Add KPROBES_ON_FTRACE support - Add EP11 AES secure keys support - PAES rework and prerequisites for paes-s390 ciphers selftests - Fix page table upgrade for hugetlbfs" * tag 's390-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pkey/zcrypt: Support EP11 AES secure keys s390/zcrypt: extend EP11 card and queue sysfs attributes s390/zcrypt: add new low level ep11 functions support file s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprb s390/zcrypt: enable card/domain autoselect on ep11 cprbs s390/crypto: enable clear key values for paes ciphers s390/pkey: Add support for key blob with clear key value s390/crypto: Rework on paes implementation s390: support KPROBES_ON_FTRACE s390/mm: fix dynamic pagetable upgrade for hugetlbfs
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan3-21/+19
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-30s390/pkey/zcrypt: Support EP11 AES secure keysHarald Freudenberger3-102/+1401
Extend the low level ep11 misc functions implementation by several functions to support EP11 key objects for paes and pkey: - EP11 AES secure key generation - EP11 AES secure key generation from given clear key value - EP11 AES secure key blob check - findcard function returns list of apqns based on given criterias - EP11 AES secure key derive to CPACF protected key Extend the pkey module to be able to generate and handle EP11 secure keys and also use them as base for deriving protected keys for CPACF usage. These ioctls are extended to support EP11 keys: PKEY_GENSECK2, PKEY_CLR2SECK2, PKEY_VERIFYKEY2, PKEY_APQNS4K, PKEY_APQNS4KT, PKEY_KBLOB2PROTK2. Additionally the 'clear key' token to protected key now uses an EP11 card if the other ways (via PCKMO, via CCA) fail. The PAES cipher implementation needed a new upper limit for the max key size, but is now also working with EP11 keys. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: extend EP11 card and queue sysfs attributesHarald Freudenberger1-20/+253
This patch introduces new sysfs attributes for EP11 cards and queues: An EP11 card gets four new sysfs attributes: /sys/devices/ap/cardxx/API_ordinalnr The EP11 card firmware API ordinal number. /sys/devices/ap/cardxx/FW_version The EP11 card firmware major and minor version. /sys/devices/ap/cardxx/serialnr Displays the serial number of the EP11 card. The serial number is a 16 character string unique for this EP11 card. /sys/devices/ap/cardxx/op_modes Displays operation modes for this EP11 card. Known operation modes are: FIPS2009, BSI2009, FIPS2011, BSI2011 and BSICC2017. The EP11 queues get two new sysfs attributes: /sys/devices/ap/cardxx/xx.yyyy/mkvps Displays information about the master key(s) states and verification patterns. Two lines are displayed: WK CUR: <wk_cur_state> <wk_cur_vp> WK NEW: <wk_new_state> <wk_new_vp> with <wk_cur_state>: 'invalid' or 'valid' <wk_new_state>: 'empty' or 'uncommitted' or 'committed' <wk_cur_vp> and <wk_new_vp>: '-' or a 32 byte hash pattern /sys/devices/ap/cardxx/xx.yyyy/op_modes Displays operation modes for this EP11 queue. Known operation modes are: FIPS2009, BSI2009, FIPS2011, BSI2011 and BSICC2017. The card information displayed with the sysfs attributes is fresh fetched from the card if the card is online, otherwise cached values are used. The queue information displayed with the sysfs attributes is always fetched on the fly and not cached. So each read of any of these sysfs attributes will cause an request/reply CPRB communication with the EP11 crypto card. The queue attributes address the corresponding EP11 domain within the EP11 card. The card attributes addresses any domain within the EP11 card (subject to the dispatch algorithm within the zcrypt device driver). If the addressed domain is offline or for card addressing all domains are offline the attributes will display '-' for state and verification patterns and an empty string for op mode, serial number, API_ordinalnr and FW_version. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: add new low level ep11 functions support fileHarald Freudenberger4-1/+428
This patch introduces two new files which provide some low level functions to interact with EP11 crypto cards: ep11_get_card_info() sends an EP11 query module info CPRB to the addressed card, processes the returning reply and exposes some of the information returned in the new ep11_card_info struct. ep11_get_domain_info() sends an EP11 query domain info CPRB to the addressed card/queue, processes the returning reply and exposes some of the information returned in the new ep11_domain_info struct. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: ep11 structs rework, export zcrypt_send_ep11_cprbHarald Freudenberger2-4/+11
Minor rework for struct ep11_cprb and struct ep11_urb. Use of u8, u16, u32 instead of unsigned char. Declare pointers to mem from userspace with __user to give sparse a chance to check. Export zcrypt_send_ep11_cprb() function as this function will be called by code in progress which will build ep11 cprbs within the zcrypt device driver zoo and send them to EP11 crypto cards. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/zcrypt: enable card/domain autoselect on ep11 cprbsHarald Freudenberger1-4/+7
For EP11 CPRBs there was only to choose between specify one or more ep11 targets or not give a target at all. Without any target the zcrypt code assumed AUTOSELECT. For EP11 this ended up in choosing any EP11 APQN with regards to the weight. However, CCA CPRBs can have a more fine granular target addressing. The caller can give 0xFFFF as AUTOSELECT for the card and/or the domain. So it's possible to address any card but domain given or any domain but card given. This patch now introduces the very same for EP11 CPRB handling. An EP11 target entry now may contain 0xFFFF as card and/or domain value with the meaning of ANY card or domain. So now the same behavior as with CCA CPRBs becomes possible: Address any card with given domain or address any domain within given card. For convenience the zcrypt.h header file now has two new defines AUTOSEL_AP and AUTOSEL_DOM covering the 0xFFFF value to address card any and domain any. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-30s390/pkey: Add support for key blob with clear key valueHarald Freudenberger2-6/+55
This patch adds support for a new key blob format to the pkey kernel module. The new key blob comprises a clear key value together with key type information. The implementation tries to derive an protected key from the blob with the clear key value inside with 1) the PCKMO instruction. This may fail as the LPAR profile may disable this way. 2) Generate an CCA AES secure data key with exact the clear key value. This requires to have a working crypto card in CCA Coprocessor mode. Then derive an protected key from the CCA AES secure key again with the help of a working crypto card in CCA mode. If both way fail, the transformation of the clear key blob into a protected key will fail. For the PAES cipher this would result in a failure at setkey() invocation. A clear key value exposed in main memory is a security risk. The intention of this new 'clear key blob' support for pkey is to provide self-tests for the PAES cipher key implementation. These known answer tests obviously need to be run with well known key values. So with the clear key blob format there is a way to provide knwon answer tests together with an pkey clear key blob for the in-kernel self tests done at cipher registration. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-26s390/qeth: remove HARDSETUP stateJulian Wiedmann5-21/+3
qeth_l?_stop_card() is _never_ called while in HARDSETUP state, and there's no other usage of the card state that relies on the DOWN -> HARDSETUP -> SOFTSETUP transition. As related cleanup, remove the check in qeth_realloc_buffer_pool() as it is already done by the callers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26s390/qeth: make cmd/reply matching more flexibleJulian Wiedmann3-12/+39
When data is received on the READ channel, the matching logic for cmds that are waiting for a reply is currently hard-coded into the channel's main IO callback. Move this into a per-cmd callback, so that we can apply custom matching logic for each individual cmd. This also allows us to remove the coarse-grained check for unexpected non-IPA replies, since they will no longer match against _all_ pending cmds. Note that IDX cmds use _no_ matcher, since their reply is synchronously received as part of the cmd's IO. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26s390/qeth: consolidate online/offline codeJulian Wiedmann4-184/+107
Large parts of the online/offline code are identical now, and cleaning up the remaining stuff is easier with a shared core. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26s390/qeth: consolidate QDIO queue setupJulian Wiedmann4-17/+9
Move some duplicated logic into a shared code path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-26s390/qeth: shift some bridgeport code aroundJulian Wiedmann3-39/+22
qeth_l2_setup_bridgeport_attrs() is entirely unrelated to sysfs functionality, move it where it belongs. While at it merge all the bridgeport-specific code in the set-online path together. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller7-7/+10
2020-01-09s390/zcrypt: move ap device reset from bus to driver codeHarald Freudenberger6-5/+8
This patch moves the reset invocation of an ap device when fresh detected from the ap bus to the probe() function of the driver responsible for this device. The virtualisation of ap devices makes it necessary to remove unconditioned resets on fresh appearing apqn devices. It may be that such a device is already enabled for guest usage. So there may be a race condition between host ap bus and guest ap bus doing the reset. This patch moves the reset from the ap bus to the zcrypt drivers. So if there is no zcrypt driver bound to an ap device - for example the ap device is bound to the vfio device driver - the ap device is untouched passed to the vfio device driver. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-09s390/zcrypt: Fix CCA cipher key gen with clear key value functionHarald Freudenberger1-2/+2
Regression tests showed that the CCA cipher key function which generates an CCA cipher key with given clear key value does not work correctly. At parsing the reply CPRB two limits are wrong calculated resulting in rejecting the reply as invalid with s390dbf message "_ip_cprb_helper reply with invalid or unknown key block". Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support") Cc: Stable <stable@vger.kernel.org> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-07vfio-ccw: Use the correct style for SPDX License IdentifierNishad Kamdar1-2/+2
This patch corrects the SPDX License Identifier style in header file related to S/390 common i/o drivers. It assigns explicit block comment to the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Fixes: 3cd90214b70f ("vfio: ccw: add tracepoints for interesting error paths") Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Message-Id: <20191225122054.GA4598@nishad> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-38/+43
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26s390/qeth: remove QETH_RX_PULL_LENJulian Wiedmann2-3/+4
Since commit f677fcb9aeb6 ("s390/qeth: ensure linear access to packet headers"), the CQ-specific skbs are allocated with a slightly bigger linear part than necessary. Shrink it down to the maximum that's needed by qeth_extract_skb(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26s390/qeth: use napi_gro_frags() for SG skbsJulian Wiedmann1-17/+50
For non-linear packets, get the skb for attaching the page fragments from napi_get_frags() so that it can be recycled during GRO. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26s390/qeth: consolidate RX codeJulian Wiedmann4-174/+153
To reduce the path length and levels of indirection, move the RX processing from the sub-drivers into the core. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: fix initialization on old HWJulian Wiedmann1-3/+1
I stumbled over an old OSA model that claims to support DIAG_ASSIST, but then rejects the cmd to query its DIAG capabilities. In the old code this was ok, as the returned raw error code was > 0. Now that we translate the raw codes to errnos, the "rc < 0" causes us to fail the initialization of the device. The fix is trivial: don't bail out when the DIAG query fails. Such an error is not critical, we can still use the device (with a slightly reduced set of features). Fixes: 742d4d40831d ("s390/qeth: convert remaining legacy cmd callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: vnicc Fix init to defaultAlexandra Winter1-1/+3
During vnicc_init wanted_char should be compared to cur_char and not to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce the default values as desired values. Note, that it is expected, that a card comes online with default values. This patch was tested with private card firmware. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24s390/qeth: Fix vnicc_is_in_use if rx_bcast not setAlexandra Winter1-2/+1
Symptom: After vnicc/rx_bcast has been manually set to 0, bridge_* sysfs parameters can still be set or written. Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast. Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters. Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 18:57:14 +0000