summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-11-27Merge tag 'net-5.10-rc6' of ↵Linus Torvalds3-47/+62
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.10-rc6, including fixes from the WiFi driver, and CAN subtrees. Current release - regressions: - gro_cells: reduce number of synchronize_net() calls - ch_ktls: release a lock before jumping to an error path Current release - always broken: - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header Previous release - regressions: - net/tls: fix missing received data after fast remote close - vsock/virtio: discard packets only when socket is really closed - sock: set sk_err to ee_errno on dequeue from errq - cxgb4: fix the panic caused by non smac rewrite Previous release - always broken: - tcp: fix corner cases around setting ECN with BPF selection of congestion control - tcp: fix race condition when creating child sockets from syncookies on loopback interface - usbnet: ipheth: fix connectivity with iOS 14 - tun: honor IOCB_NOWAIT flag - net/packet: fix packet receive on L3 devices without visible hard header - devlink: Make sure devlink instance and port are in same net namespace - net: openvswitch: fix TTL decrement action netlink message format - bonding: wait for sysfs kobject destruction before freeing struct slave - net: stmmac: fix upstream patch applied to the wrong context - bnxt_en: fix return value and unwind in probe error paths Misc: - devlink: add extra layer of categorization to the reload stats uAPI before it's released" * tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits) sock: set sk_err to ee_errno on dequeue from errq mptcp: fix NULL ptr dereference on bad MPJ net: openvswitch: fix TTL decrement action netlink message format can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0 can: m_can: fix nominal bitiming tseg2 min for version >= 3.1 can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given can: gs_usb: fix endianess problem with candleLight firmware ch_ktls: lock is not freed net/tls: Protect from calling tls_dev_del for TLS RX twice devlink: Make sure devlink instance and port are in same net namespace devlink: Hold rtnl lock while reading netdev attributes ptp: clockmatrix: bug fix for idtcm_strverscmp enetc: Let the hardware auto-advance the taprio base-time of 0 gro_cells: reduce number of synchronize_net() calls net: stmmac: fix incorrect merge of patch upstream ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init Documentation: netdev-FAQ: suggest how to post co-dependent series ibmvnic: enhance resetting status check during module exit ...
2020-11-20s390/qeth: fix tear down of async TX buffersJulian Wiedmann1-6/+0
When qeth_iqd_tx_complete() detects that a TX buffer requires additional async completion via QAOB, it might fail to replace the queue entry's metadata (and ends up triggering recovery). Assume now that the device gets torn down, overruling the recovery. If the QAOB notification then arrives before the tear down has sufficiently progressed, the buffer state is changed to QETH_QDIO_BUF_HANDLED_DELAYED by qeth_qdio_handle_aob(). The tear down code calls qeth_drain_output_queue(), where qeth_cleanup_handled_pending() will then attempt to replace such a buffer _again_. If it succeeds this time, the buffer ends up dangling in its replacement's ->next_pending list ... where it will never be freed, since there's no further call to qeth_cleanup_handled_pending(). But the second attempt isn't actually needed, we can simply leave the buffer on the queue and re-use it after a potential recovery has completed. The qeth_clear_output_buffer() in qeth_drain_output_queue() will ensure that it's in a clean state again. Fixes: 72861ae792c2 ("qeth: recovery through asynchronous delivery") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20s390/qeth: fix af_iucv notification raceJulian Wiedmann2-24/+58
The two expected notification sequences are 1. TX_NOTIFY_PENDING with a subsequent TX_NOTIFY_DELAYED_*, when our TX completion code first observed the pending TX and the QAOB then completes at a later time; or 2. TX_NOTIFY_OK, when qeth_qdio_handle_aob() picked up the QAOB completion before our TX completion code even noticed that the TX was pending. But as qeth_iqd_tx_complete() and qeth_qdio_handle_aob() can run concurrently, we may end up with a race that results in a sequence of TX_NOTIFY_DELAYED_* followed by TX_NOTIFY_PENDING. Which would confuse the af_iucv code in its tracking of pending transmits. Rework the notification code, so that qeth_qdio_handle_aob() defers its notification if the TX completion code is still active. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20s390/qeth: make af_iucv TX notification call more robustJulian Wiedmann1-1/+2
Calling into socket code is ugly already, at least check whether we are dealing with the expected sk_family. Only looking at skb->protocol is bound to cause troubles (consider eg. af_packet). Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20s390/qeth: Remove pnso workaroundAlexandra Winter1-16/+2
Remove workaround that supported early hardware implementations of PNSO OC3. Rely on the 'enarf' feature bit instead. Fixes: fa115adff2c1 ("s390/qeth: Detect PNSO OC3 capability") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> [jwi: use logical instead of bit-wise AND] Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20Merge tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+6
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - Doorbell Buffer freeing fix (Minwoo Im) - CSE log leak fix (Keith Busch) - blk-cgroup hd_struct leak fix (Christoph) - Flush request state fix (Ming) - dasd NULL deref fix (Stefan) * tag 'block-5.10-2020-11-20' of git://git.kernel.dk/linux-block: s390/dasd: fix null pointer dereference for ERP requests blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostats nvme: fix memory leak freeing command effects nvme: directly cache command effects log nvme: free sq/cq dbbuf pointers when dbbuf set fails block: mark flush request as IDLE when it is really finished
2020-11-16s390/dasd: fix null pointer dereference for ERP requestsStefan Haberland1-0/+6
When requeueing all requests on the device request queue to the blocklayer we might get to an ERP (error recovery) request that is a copy of an original CQR. Those requests do not have blocklayer request information or a pointer to the dasd_queue set. When trying to access those data it will lead to a null pointer dereference in dasd_requeue_all_requests(). Fix by checking if the request is an ERP request that can simply be ignored. The blocklayer request will be requeued by the original CQR that is on the device queue right behind the ERP request. Fixes: 9487cfd3430d ("s390/dasd: fix handling of internal requests") Cc: <stable@vger.kernel.org> #4.16 Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-03s390/pkey: fix paes selftest failure with paes and pkey static buildHarald Freudenberger1-14/+16
When both the paes and the pkey kernel module are statically build into the kernel, the paes cipher selftests run before the pkey kernel module is initialized. So a static variable set in the pkey init function and used in the pkey_clr2protkey function is not initialized when the paes cipher's selftests request to call pckmo for transforming a clear key value into a protected key. This patch moves the initial setup of the static variable into the function pck_clr2protkey. So it's possible, to use the function for transforming a clear to a protected key even before the pkey init function has been called and the paes selftests may run successful. Reported-by: Alexander Egorenkov <Alexander.Egorenkov@ibm.com> Cc: <stable@vger.kernel.org> # 4.20 Fixes: f822ad2c2c03 ("s390/pkey: move pckmo subfunction available checks away from module init") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-03s390/ap: fix ap devices reference countingHarald Freudenberger3-12/+21
With the last rework of the AP bus scan function one get_device() is missing causing the reference counter to be one instance too low. Together with binding/unbinding device drivers to an ap device it may end up in an segfault because the ap device is freed but a device driver still assumes it's pointer to the ap device is valid: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. Krnl PSW : 0404e00180000000 000000001472f3b6 (klist_next+0x7e/0x180) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Call Trace: [<000000001472f3b6>] klist_next+0x7e/0x180 ([<000000001472f36a>] klist_next+0x32/0x180) [<00000000147c14de>] bus_for_each_dev+0x66/0xb8 [<0000000014aab0d4>] ap_scan_adapter+0xcc/0x6c0 [<0000000014aab74a>] ap_scan_bus+0x82/0x140 [<0000000013f3b654>] process_one_work+0x27c/0x478 [<0000000013f3b8b6>] worker_thread+0x66/0x368 [<0000000013f44e32>] kthread+0x17a/0x1a0 [<0000000014af23e4>] ret_from_fork+0x24/0x2c Kernel panic - not syncing: Fatal exception: panic_on_oops Fixed by adjusting the reference count with get_device() on the right place. Also now the device drivers don't need to adjust the ap device's reference counting any more. This is now done in the ap bus probe and remove functions. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Fixes: 4f2fcccdb547 ("s390/ap: add card/queue deconfig state") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-10-26s390/ism: fix incorrect system EIDKarsten Graul1-1/+1
The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091ebb2a1 ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds40-955/+2328
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-10-16Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: "155 patches. Subsystems affected by this patch series: mm (dax, debug, thp, readahead, page-poison, util, memory-hotplug, zram, cleanups), misc, core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch, binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan, romfs, and fault-injection" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits) lib, uaccess: add failure injection to usercopy functions lib, include/linux: add usercopy failure capability ROMFS: support inode blocks calculation ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang sched.h: drop in_ubsan field when UBSAN is in trap mode scripts/gdb/tasks: add headers and improve spacing format scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command kernel/relay.c: drop unneeded initialization panic: dump registers on panic_on_warn rapidio: fix the missed put_device() for rio_mport_add_riodev rapidio: fix error handling path nilfs2: fix some kernel-doc warnings for nilfs2 autofs: harden ioctl table ramfs: fix nommu mmap with gaps in the page cache mm: remove the now-unnecessary mmget_still_valid() hack mm/gup: take mmap_lock in get_dump_page() binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot coredump: rework elf/elf_fdpic vma_dump_size() into common helper coredump: refactor page range dumping into common helper coredump: let dump_emit() bail out on short writes ...
2020-10-16mm/memory_hotplug: prepare passing flags to add_memory() and friendsDavid Hildenbrand1-1/+1
We soon want to pass flags, e.g., to mark added System RAM resources. mergeable. Prepare for that. This patch is based on a similar patch by Oscar Salvador: https://lkml.kernel.org/r/20190625075227.15193-3-osalvador@suse.de Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Juergen Gross <jgross@suse.com> # Xen related part Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Baoquan He <bhe@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: "Oliver O'Halloran" <oohall@gmail.com> Cc: Pingfan Liu <kernelfans@gmail.com> Cc: Nathan Lynch <nathanl@linux.ibm.com> Cc: Libor Pechacek <lpechacek@suse.cz> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Leonardo Bras <leobras.c@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julien Grall <julien@xen.org> Cc: Kees Cook <keescook@chromium.org> Cc: Roger Pau Monné <roger.pau@citrix.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wei Yang <richardw.yang@linux.intel.com> Link: https://lkml.kernel.org/r/20200911103459.10306-5-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds21-679/+1245
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-7/+11
Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ...
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds2-22/+10
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-09s390/zcrypt: fix wrong format specificationsHarald Freudenberger1-5/+5
Fixes 5 wrong format specification findings found by the kernel test robot in ap_queue.c: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat] __func__, status.response_code, Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: 2ea2a6099ae3 ("s390/ap: add error response code field for ap queue devices") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/zcrypt: Introduce Failure Injection featureHarald Freudenberger6-3/+151
Introduce a way to specify additional debug flags with an crpyto request to be able to trigger certain failures within the zcrypt device drivers and/or ap core code. This failure injection possibility is only enabled with a kernel debug build CONFIG_ZCRYPT_DEBUG) and should never be available on a regular kernel running in production environment. Details: * The ioctl(ICARSAMODEXPO) get's a struct ica_rsa_modexpo. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ICARSACRT) get's a struct ica_rsa_modexpo_crt. If the leftmost bit of the 32 bit unsigned int inputdatalength field is set, the uppermost 16 bits are separated and used als debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSECSENDCPRB) used to send CCA CPRBs get's a struct ica_xcRB. If the leftmost bit of the 32 bit unsigned int status field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. * The ioctl(ZSENDEP11CPRB) used to send EP11 CPRBs get's a struct ep11_urb. If the leftmost bit of the 64 bit unsigned int req_len field is set, the uppermost 16 bits of this field are used as debug flag value. The process is checked to have the CAP_SYS_ADMIN capability enabled or EPERM is returned. So it is possible to send an additional 16 bit value to the zcrypt API to be used to carry a failure injection command which may trigger special behavior within the zcrypt API and layers below. This 16 bit value is for the rest of the test referred as 'fi command' for Failure Injection. The lower 8 bits of the fi command construct a numerical argument in the range of 1-255 and is the 'fi action' to be performed with the request or the resulting reply: * 0x00 (all requests): No failure injection action but flags may be provided which may affect the processing of the request or reply. * 0x01 (only CCA CPRBs): The CPRB's agent_ID field is set to 'FF'. This results in an reply code 0x90 (Transport-Protocol Failure). * 0x02 (only CCA CPRBs): After the APQN to send to has been chosen, the domain field within the CPRB is overwritten with value 99 to enforce an reply with RY 0x8A. * 0x03 (all requests): At NQAP invocation the invalid qid value 0xFF00 is used causing an response code of 0x01 (AP queue not valid). The upper 8 bits of the fi command may carry bit flags which may influence the processing of an request or response: * 0x01: No retry. If this bit is set, the usual loop in the zcrypt API which retries an CPRB up to 10 times when the lower layers return with EAGAIN is abandoned after the first attempt to send the CPRB. * 0x02: Toggle special. Toggles the special bit on this request. This should result in an reply code RY~0x41 and result in an ioctl failure with errno EINVAL. This failure injection possibilities may get some further extensions in the future. As of now this is a starting point for Continuous Test and Integration to trigger some failures and watch for the reaction of the ap bus and zcrypt device driver code. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/zcrypt: move ap_msg param one level up the call chainHarald Freudenberger4-72/+82
Move the creating and disposal of the struct ap_message one level up the call chain. The ap message was constructed in the calling functions in msgtype50 and msgtype6 but only for the ica rsa messages. For CCA and EP11 CPRBs the ap message struct is created in the zcrypt api functions. This patch moves the construction of the ap message struct into the functions zcrypt_rsa_modexpo and zcrypt_rsa_crt. So now all the 4 zcrypt api functions zcrypt_rsa_modexpo, zcrypt_rsa_crt, zcrypt_send_cprb and zcrypt_send_ep11_cprb appear and act similar. There are no functional changes coming with this patch. However, the availability of the ap_message struct has advantages which will be needed by a follow up patch. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/ap/zcrypt: revisit ap and zcrypt error handlingHarald Freudenberger6-131/+116
Revisit the ap queue error handling: Based on discussions and evaluatios with the firmware folk here is now a rework of the response code handling for all the AP instructions. The idea is to distinguish between failures because of some kind of invalid request where a retry does not make any sense and a failure where another attempt to send the very same request may succeed. The first case is handled by returning EINVAL to the userspace application. The second case results in retries within the zcrypt API controlled by a per message retry counter. Revisit the zcrpyt error handling: Similar here, based on discussions with the firmware people here comes a rework of the handling of all the reply codes. Main point here is that there are only very few cases left, where a zcrypt device queue is switched to offline. It should never be the case that an AP reply message is 'unknown' to the device driver as it indicates a total mismatch between device driver and crypto card firmware. In all other cases, the code distinguishes between failure because of invalid message (see above - EINVAL) or failures of the infrastructure (see above - EAGAIN). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/ap: Support AP card SCLP config and deconfig operationsHarald Freudenberger1-1/+24
Support SCLP AP adapter config and deconfig operations: The sysfs deconfig attribute /sys/devices/ap/cardxx/deconfig for each AP card is now read-write. Writing in a '1' triggers a synchronous SCLP request to configure the adapter, writing in a '0' sends a synchronous SCLP deconfigure request. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/sclp: Add support for SCLP AP adapter config/deconfigHarald Freudenberger3-1/+66
Add support for AP bus adapter config and deconfig to the sclp core code. The code is statically build into the kernel when ZCRYPT is configured either as module or with static support. This is the base functionality for having configure/deconfigure support in the AP bus and card code. Another patch will exploit this soon. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Suggested-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/ap: add card/queue deconfig stateHarald Freudenberger7-142/+319
This patch adds a new config state to the ap card and queue devices. This state reflects the response code 0x03 "AP deconfigured" on TQAP invocation and is tracked with every ap bus scan. Together with this new state now a card/queue device which is 'deconfigured' is not disposed any more. However, for backward compatibility the online state now needs to take this state into account. So a card/queue is offline when the device is not configured. Furthermore a device can't get switched from offline to online state when not configured. The config state is shown in sysfs at /sys/devices/ap/cardxx/config for the card and /sys/devices/ap/cardxx/xx.yyyy/config for each queue within each card. It is a read-only attribute reflecting the negation of the 'AP deconfig' state as it is noted in the AP documents. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/ap: add error response code field for ap queue devicesHarald Freudenberger4-26/+101
On AP instruction failures the last response code is now kept in the struct ap_queue. There is also a new sysfs attribute showing this field (enabled only on debug kernels). Also slight rework of the AP_DBF macros to get some more content into one debug feature message line. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/ap: split ap queue state machine state from device stateHarald Freudenberger5-57/+155
The state machine for each ap queue covered a mixture of device states and state machine (firmware queue state) states. This patch splits the device states and the state machine states into two different enums and variables. The major state is the device state with currently these values: AP_DEV_STATE_UNINITIATED - fresh and virgin, not touched AP_DEV_STATE_OPERATING - queue dev is working normal AP_DEV_STATE_SHUTDOWN - remove/unbind/shutdown in progress AP_DEV_STATE_ERROR - device is in error state only when the device state is > UNINITIATED the state machine is run. The state machine represents the states of the firmware queue: AP_SM_STATE_RESET_START - starting point, reset (RAPQ) ap queue AP_SM_STATE_RESET_WAIT - reset triggered, waiting to be finished if irqs enabled, set up irq (AQIC) AP_SM_STATE_SETIRQ_WAIT - enable irq triggered, waiting to be finished, then go to IDLE AP_SM_STATE_IDLE - queue is operational but empty AP_SM_STATE_WORKING - queue is operational, requests are stored and replies may wait for getting fetched AP_SM_STATE_QUEUE_FULL - firmware queue is full, so only replies can get fetched For debugging each ap queue shows a sysfs attribute 'states' which displays the device and state machine state and is only available when the kernel is build with CONFIG_ZCRYPT_DEBUG enabled. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-07s390/zcrypt: introduce msg tracking in zcrypt functionsHarald Freudenberger5-124/+213
Introduce a new internal struct zcrypt_track with an retry counter field and a last return code field. Fill and update these fields at certain points during processing of an request/reply. This tracking info is then used to - avoid trying to resend the message forever. Now each message is tried to be send TRACK_AGAIN_MAX (currently 10) times and then the ioctl returns to userspace with errno EAGAIN. - avoid trying to resend the message on the very same card/domain. If possible (more than one APQN with same quality) don't use the very same qid as the previous attempt when again scheduling the request. This is done by adding penalty weight values when the dispatching takes place. There is a penalty TRACK_AGAIN_CARD_WEIGHT_PENALTY for using the same card as previously and another penalty define TRACK_AGAIN_QUEUE_WEIGHT_PENALTY to be considered when the same qid as the previous sent attempt is calculated. Both values make it harder to choose the very same card/domain but not impossible. For example when only one APQN is available a resend can only address the very same APQN. There are some more ideas for the future to extend the use of this tracking information. For example the last response code at NQAP and DQAP could be stored there, giving the possibility to extended tracing and debugging about requests failing to get processed properly. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+2
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/ctcm: remove orphaned function declarationsVasily Gorbik2-2/+0
drivers/s390/net/ctcm_fsms.h: fsm_action_nop - only declaration left after commit 04885948b101 ("ctc: removal of the old ctc driver") drivers/s390/net/ctcm_mpc.h: ctcmpc_open - only declaration left after commit 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: static checker cleanupsJulian Wiedmann5-23/+22
- Add/delete some blanks, white spaces and braces. - Fix misindentations. - Adjust a deprecated header include, and htons() conversion. - Remove extra 'return' statements. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: use netdev_name()Julian Wiedmann5-36/+35
Replace our custom version of netdev_name(). Once we started to allocate the netdev at probe time with commit d3d1b205e89f ("s390/qeth: allocate netdevice early"), this stopped working as intended anyway. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: constify the disciplinesJulian Wiedmann3-5/+5
The discipline struct is a fixed group of function pointers. So declare the L2 and L3 disciplines as constant. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: allow configuration of TX queues for OSA devicesJulian Wiedmann6-20/+53
For OSA devices that are _not_ configured in prio-queue mode, give users the option of selecting the number of active TX queues. This requires setting up the HW queues with a reasonable default QoS value in the QIB's PQUE parm area. As with the other device types, we bring up the device with a minimal number of TX queues for compatibility reasons. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: de-magic the QIB parm areaJulian Wiedmann2-35/+41
Use a proper struct, and only program the QIB extensions for devices where they are supported. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/qeth: keep track of wanted TX queuesJulian Wiedmann5-54/+61
When re-initializing a device, we can hit a situation where qeth_osa_set_output_queues() detects that it supports more or less HW TX queues than before. Right now we adjust dev->real_num_tx_queues from right there, but 1. it's getting more & more complicated to cover all cases, and 2. we can't re-enable the actually expected number of TX queues later because we lost the needed information. So keep track of the wanted TX queues (on initial setup, and whenever its changed via .set_channels), and later use that information when re-enabling the netdevice. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02s390/nvme: support firmware-assisted dump to NVMe disksAlexander Egorenkov2-6/+13
From the kernel perspective NVMe dump works exactly like zFCP dump. Therefore, adapt all places where code explicitly tests only for IPL of type FCP DUMP. And also set the memory end correctly in this case. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390: remove orphaned function declarationsVasily Gorbik4-17/+0
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/sclp: remove orphaned sclp_set_columns and sclp_set_htabVasily Gorbik2-20/+0
sclp_set_columns and sclp_set_htab are leftovers since commit 095761d28ae4 ("[S390] sclp_tty: remove ioctl interface."), remove them as a dead code. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/sclp_sdias: remove unused sclp_sdias_exitVasily Gorbik2-8/+0
sclp_sdias cannot be built as a module, CRASH_DUMP option is a bool not a tristate. zcore_exit() has already been removed with commit cbe62fac178c ("s390: char: make zcore explicitly non-modular"). Remove orphaned sclp_sdias_exit for consistency as well. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/cio: remove unused channel_subsystem_reinitVasily Gorbik1-14/+0
Added with commit 77e844b96440 ("s390/hibernate: add early resume function") unused since commit 394216275c7d ("s390: remove broken hibernate / power management support"). Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-29s390/3215: simplify the return expression of tty3215_open()Qinglang Miao1-6/+1
Simplify the return expression. Link: https://lkml.kernel.org/r/20200921131101.93037-1-miaoqinglang@huawei.com Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-28net/smc: introduce CHID callback for ISM devicesUrsula Braun1-0/+12
With SMCD version 2 the CHIDs of ISM devices are needed for the CLC handshake. This patch provides the new callback to retrieve the CHID of an ISM device. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net/smc: introduce System Enterprise ID (SEID)Ursula Braun2-0/+42
SMCD version 2 defines a System Enterprise ID (short SEID). This patch contains the SEID creation and adds the callback to retrieve the created SEID. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-26Merge tag 's390-5.9-7' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Vasily Gorbik: "Fix truncated ZCRYPT_PERDEV_REQCNT ioctl result. Copy entire reqcnt list" * tag 's390-5.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctl
2020-09-26s390/stp: add support for leap secondsSven Schnelle1-0/+21
In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig1-4/+4
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24s390/pkey: support CCA and EP11 secure ECC private keysHarald Freudenberger5-80/+756
This patch extends the pkey kernel module to support CCA and EP11 secure ECC (private) keys as source for deriving ECC protected (private) keys. There is yet another new ioctl to support this: PKEY_KBLOB2PROTK3 can handle all the old keys plus CCA and EP11 secure ECC keys. For details see ioctl description in pkey.h. The CPACF unit currently only supports a subset of 5 different ECC curves (P-256, P-384, P-521, ED25519, ED448) and so only keys of this curve type can be transformed into protected keys. However, the pkey and the cca/ep11 low level functions do not check this but simple pass-through the key blob to the firmware onto the crypto cards. So most likely the failure will be a response carrying an error code resulting in user space errno value EIO instead of EINVAL. Deriving a protected key from an EP11 ECC secure key requires a CEX7 in EP11 mode. Deriving a protected key from an CCA ECC secure key requires a CEX7 in CCA mode. Together with this new ioctl the ioctls for querying lists of apqns (PKEY_APQNS4K and PKEY_APQNS4KT) have been extended to support EP11 and CCA ECC secure key type and key blobs. Together with this ioctl there comes a new struct ep11kblob_header which is to be prepended onto the EP11 key blob. See details in pkey.h for the fields in there. The older EP11 AES key blob with some info stored in the (unused) session field is also supported with this new ioctl. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-24s390/zcrypt: Support for CCA APKA master keysHarald Freudenberger5-57/+154
Support for CCA APKA (used for CCA ECC keys) master keys. The existing mkvps sysfs attribute for each queue for cards in CCA mode is extended to show the APKA master key register states and verification pattern: Improve the mkvps sysfs attribute to display the APKA master key verification patterns for old, current and new master key registers. The APKA master key is used to encrypt CCA ECC secure keys. The syntax is analog to the existing AES mk verification patterns: APKA NEW: <new_apka_mk_state> <new_apka_mk_mkvp> APKA CUR: <cur_apka_mk_state> <cur_apka_mk_mkvp> APKA OLD: <old_apka_mk_state> <old_apka_mk_mkvp> with <new_apka_mk_state>: 'empty' or 'partial' or 'full' <cur_apka_mk_state>: 'valid' or 'invalid' <old_apka_mk_state>: 'valid' or 'invalid' <new_apka_mk_mkvp>, <cur_apka_mk_mkvp>, <old_apka_mk_mkvp> 8 byte hex string with leading 0x MKVP means Master Key Verification Pattern and is a folded hash over the key value. Only the states 'full' and 'valid' result in displaying a useful mkvp, otherwise a mkvp of all bytes zero is shown. If for any reason the FQ fails and the (cached) information is not available, the state '-' will be shown with the mkvp value also '-'. The values shown here are the very same as the cca panel tools displays. The internal function cca_findcard2() also supports to match against the APKA master key verification patterns and the pkey kernel module which uses this function needed compatible rewrite of these invocations. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-24s390/zcrypt: Fix ZCRYPT_PERDEV_REQCNT ioctlChristian Borntraeger1-1/+2
reqcnt is an u32 pointer but we do copy sizeof(reqcnt) which is the size of the pointer. This means we only copy 8 byte. Let us copy the full monty. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: af4a72276d49 ("s390/zcrypt: Support up to 256 crypto adapters.") Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-23s390/qeth: remove forward declarations in L2 codeJulian Wiedmann2-197/+188
Shuffle some code around (primarily all the discipline-related stuff) to get rid of all the unnecessary forward declarations. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23s390/qeth: consolidate teardown codeJulian Wiedmann4-74/+50
Clarify which discipline-specific steps are needed to roll back after error in qeth_l?_set_online(), and which are common to roll back from qeth_hardsetup_card(). Some steps (cancelling the RX modeset, draining the TX queues) are only necessary if the netdev was potentially UP before, so move them to the common qeth_set_offline(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>