summaryrefslogtreecommitdiffstats
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds8-199/+169
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds1-13/+20
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-04Merge tag 'tasklets-v5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull tasklets API update from Kees Cook: "These are the infrastructure updates needed to support converting the tasklet API to something more modern (and hopefully for removal further down the road). There is a 300-patch series waiting in the wings to get set out to subsystem maintainers, but these changes need to be present in the kernel first. Since this has some treewide changes, I carried this series for -next instead of paining Thomas with it in -tip, but it's got his Ack. This is similar to the timer_struct modernization from a while back, but not nearly as messy (I hope). :) - Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)" * tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: tasklet: Introduce new initialization API treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD() usb: gadget: udc: Avoid tasklet passing a global
2020-08-03Merge tag 's390-5.9-1' of ↵Linus Torvalds18-631/+685
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for function error injection. - Add support for custom exception handlers, as required by BPF_PROBE_MEM. - Add support for BPF_PROBE_MEM. - Add trace events for idle enter / exit for the s390 specific idle implementation. - Remove unused zcore memmmap device. - Remove unused "raw view" from s390 debug feature. - AP bus + zcrypt device driver code refactoring. - Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver. - Expose only minimal interface to walk physmem for mm/memblock. This is a common code change and it has been agreed on with Mike Rapoport and Andrew Morton that this can go upstream via the s390 tree. - Rework of the s390 vmem/vmmemap code to allow for future memory hot remove. - Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10 allocations again, instead of only order-8 allocations. - Various small improvements and fixes. * tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/vmemmap: coding style updates s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections s390/vmemmap: remember unused sub-pmd ranges s390/vmemmap: fallback to PTEs if mapping large PMD fails s390/vmem: cleanup empty page tables s390/vmemmap: take the vmem_mutex when populating/freeing s390/vmemmap: cleanup when vmemmap_populate() fails s390/vmemmap: extend modify_pagetable() to handle vmemmap s390/vmem: consolidate vmem_add_range() and vmem_remove_range() s390/vmem: rename vmem_add_mem() to vmem_add_range() s390: enable HAVE_FUNCTION_ERROR_INJECTION s390/pci: clarify comment in s390_mmio_read/write s390/time: improve comparison for tod steering s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE s390/time: use CLOCKSOURCE_MASK s390/bpf: implement BPF_PROBE_MEM s390/kernel: expand exception table logic to allow new handling options s390/kernel: unify EX_TABLE* implementations s390/mm: allow order 10 allocations s390/mm: avoid trimming to MAX_ORDER ...
2020-08-03Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-blockLinus Torvalds4-13/+12
Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...
2020-07-31s390/qeth: use all configured RX buffersJulian Wiedmann1-12/+4
The (misplaced) comment doesn't make any sense, enforcing an uninitialized RX buffer won't help with IRQ reduction. So make the best use of all available RX buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: don't process empty bridge port eventsJulian Wiedmann1-0/+4
Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: integrate RX refill worker with NAPIJulian Wiedmann4-18/+26
Running a RX refill outside of NAPI context is inherently racy, even though the worker is only started for an entirely idle RX ring. >From the moment that the worker has replenished parts of the RX ring, the HW can use those RX buffers, raise an IRQ and cause our NAPI code to run concurrently to the RX refill worker. Instead let the worker schedule our NAPI instance, and refill the RX ring from there. Keeping accurate count of how many buffers still need to be refilled also removes some quirky arithmetic from the low-level code. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: tolerate pre-filled RX bufferJulian Wiedmann1-6/+14
When preparing a buffer for RX refill, tolerate that it already has a pool_entry attached. Otherwise we could easily leak such a pool_entry when re-driving the RX refill after an error (from eg. do_qdio()). This needs some minor adjustment in the code that drains RX buffer(s) prior to RX refill and during teardown, so that ->pool_entry is NULLed accordingly. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()Kees Cook1-1/+1
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-27s390/ism: indicate correct error reason in ism_alloc_dmb()Karsten Graul1-1/+1
When the ism driver allocates a new dmb in ism_alloc_dmb() it must first check for and reserve a slot in the sba bitmap. When find_next_zero_bit() finds no free slot then the return code is -ENOMEM. This code conflicts with the error when the alloc() fails later in the code. As a result of that the caller can not differentiate between out-of-memory conditions and sba-bitmap-full conditions. Fix that by using the return code -ENOSPC when the sba slot reservation failed. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20s390/qdio: remove internal polling in non-thinint pathJulian Wiedmann2-27/+2
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a little while to catch more work. But platform support for thinints has been around practically _forever_ by now, so this micro-optimization is seeing 0 actual use. Remove it to reduce the overall complexity of the hot path. In the meantime we also grew support for driver-level polling (eg. NAPI in qeth), so it's quite questionable how useful this would actually be on current kernels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: allow to scan all 128 Input SBALsJulian Wiedmann1-5/+1
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no longer get confused by a count of 128 completed SBALs. Scanning all 128 SBALs at once can improve IRQ reduction (as we now place the ACK at the right spot), and reduce the amount of processing needed to handle all completed SBALs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: fix statistics for 128 SBALsJulian Wiedmann3-14/+3
Old code would only scan up to 127 SBALs at once. So the last statistics bucket was set aside to count "discovered 127 SBALs with new work" events. But nowadays we allow to scan all 128 SBALs for Output Queues, and a subsequent patch will introduce the same for Input Queues. So fix up the accounting to use the last bucket only when all 128 SBALs have been discovered with new work. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-15s390/dasd: Use struct_size() helperGustavo A. R. Silva1-5/+3
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. Also, remove unnecessary variable _datasize_. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-15s390/dasd: fix inability to use DASD with DIAG driverStefan Haberland1-8/+17
During initialization of the DASD DIAG driver a request is issued that has a bio structure that resides on the stack. With virtually mapped kernel stacks this bio address might be in virtual storage which is unsuitable for usage with the diag250 call. In this case the device can not be set online using the DIAG discipline and fails with -EOPNOTSUP. In the system journal the following error message is presented: dasd: X.X.XXXX Setting the DASD online with discipline DIAG failed with rc=-95 Fix by allocating the bio structure instead of having it on the stack. Fixes: ce3dc447493f ("s390: add support for virtually mapped kernel stacks") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: stable@vger.kernel.org #4.20 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-14s390/qeth: constify the MPC initialization dataJulian Wiedmann3-18/+17
We're not modifying these data blobs, so mark them as constant. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: unify RX-mode hashtablesJulian Wiedmann4-14/+12
To keep track of the addresses programmed from an RX modeset, we have two separate hashtables (L2: mac_htable, L3: ip_mc_htable). These are never used at the same time, so unify them into a single rx_mode_addrs hashtable. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: cleanup OAT codeJulian Wiedmann1-28/+12
While initially just trying to fix up the indentation, condense a few lines and get rid of a goto label. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up a magic number in the OAT callbackJulian Wiedmann1-4/+2
Use the correct struct member instead of hardcoding its offset. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: use u64_to_user_ptr() in the OAT codeJulian Wiedmann1-4/+2
Use the correct helper for casting to a user pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up error handling for isolation mode cmdsJulian Wiedmann3-70/+40
As the cmd IO path has learned to propagate errnos back to its callers, let them deal with errors instead of trying to restore their previous configuration from within the IO error path. Also translate the HW error to a meaningful errno, instead of returning -EIO for all cases (and don't map this to -EOPNOTSUPP later on...). While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the data path always sees a valid isolation mode during reconfiguration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: don't clear the configured isolation modeJulian Wiedmann1-11/+11
When qeth_set_access_ctrl_online() is called during the device's initialization and discovers that isolation mode isn't supported, don't clear the user's currently configured mode. They intentionally choose to operate the device in this specific mode, and degrading the isolation is not an option. Only adjust the configuration when called via sysfs (ie. fallback = 1), and here follow the common pattern and restore it from prev_isolation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: only init the isolation mode when necessaryJulian Wiedmann1-5/+6
A newly initialized device defaults to ISOLATION_MODE_NONE, don't bother with programming this a second time. Then remove the OSD/OSX check, it's already done in the sysfs path whenever the user actually changes the configuration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: fine-tune errno when cmds are cancelledJulian Wiedmann1-1/+1
If we cancel all pending cmds (eg. when tearing down the device), don't blame it on an IO error. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: reject unsupported link type earlierJulian Wiedmann2-17/+27
Rather than delaying the decision until netdev setup, immediately reject a device when we discover that it has an unsupported link type (ie. Token Ring). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10s390/ap: rework crypto config info and default domain codeHarald Freudenberger1-148/+153
Rework of the QCI crypto info and how it is used. This is only a internal rework but does not affect the way how the ap bus acts with ap card and queue devices and domain handling. Tested on z15, z14, z12 (QCI support) and z196 (no QCI support). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-08Merge tag 'v5.8-rc4' into for-5.9/driversJens Axboe2-8/+16
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide a clean base and making the life for the NVMe changes easier. Signed-off-by: Jens Axboe <axboe@kernel.dk> * tag 'v5.8-rc4': (732 commits) Linux 5.8-rc4 x86/ldt: use "pr_info_once()" instead of open-coding it badly MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen .gitignore: Do not track `defconfig` from `make savedefconfig` io_uring: fix regression with always ignoring signals in io_cqring_wait() x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665 mm/page_alloc: fix documentation error vmalloc: fix the owner argument for the new __vmalloc_node_range callers mm/cma.c: use exact_nid true to fix possible per-numa cma leak ...
2020-07-03vfio-ccw: Fix a build error due to missing include of linux/slab.hSean Christopherson1-0/+1
Include linux/slab.h to fix a build error due to kfree() being undefined. Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-07-03s390/zcrypt: provide cex4 cca sysfs attributes for cex3Harald Freudenberger2-8/+132
This patch introduces the sysfs attributes serialnr and mkvps for cex2c and cex3c cards. These sysfs attributes are available for cex4c and higher since commit 7c4e91c0959b ("s390/zcrypt: new sysfs attributes serialnr and mkvps")' and this patch now provides the same for the older cex2 and cex3 cards. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/ap: rename and clarify ap state machine related stuffHarald Freudenberger3-138/+138
There is a state machine held for each ap queue device. The states and functions related to this where somethimes noted with _sm_ somethimes without. This patch clarifies and renames all the ap queue state machine related functions, enums and defines to have a _sm_ in the name. There is no functional change coming with this patch - it's only beautifying code. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: split ioctl function into smaller code unitsHarald Freudenberger1-72/+92
The zcrpyt_unlocked_ioctl() function has become large. So split away into new static functions the 4 ioctl ICARSAMODEXPO, ICARSACRT, ZSECSENDCPRB and ZSENDEP11CPRB. This makes the code more readable and is a preparation step for further improvements needed on these ioctls. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: code beautification and struct field renamesHarald Freudenberger9-149/+147
Some beautifications related to the internal only used struct ap_message and related code. Instead of one int carrying only the special flag now a u32 flags field is used. At struct CPRBX the pointers to additional data are now marked with __user. This caused some changes needed on code, where these structs are also used within the zcrypt misc functions. The ica_rsa_* structs now use the generic types __u8, __u32, ... instead of char, unsigned int. zcrypt_msg6 and zcrypt_msg50 use min_t() instead of min(). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/zcrypt: fix smatch warningsHarald Freudenberger2-8/+8
Fix these smatch warnings: zcrypt_api.c:986 _zcrypt_send_ep11_cprb() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:1008 _zcrypt_send_ep11_cprb() error: uninitialized symbol 'weight'. zcrypt_api.c:676 zcrypt_rsa_modexpo() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:694 zcrypt_rsa_modexpo() error: uninitialized symbol 'weight'. zcrypt_api.c:760 zcrypt_rsa_crt() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:778 zcrypt_rsa_crt() error: uninitialized symbol 'weight'. zcrypt_api.c:824 _zcrypt_send_cprb() warn: always true condition '(tdom >= 0) => (0-u16max >= 0)' zcrypt_api.c:846 _zcrypt_send_cprb() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:867 _zcrypt_send_cprb() error: uninitialized symbol 'weight'. zcrypt_api.c:1065 zcrypt_rng() error: uninitialized symbol 'pref_weight'. zcrypt_api.c:1079 zcrypt_rng() error: uninitialized symbol 'weight'. zcrypt_cex4.c:251 ep11_card_op_modes_show() warn: should '(1 << ep11_op_modes[i]->mode_bit)' be a 64 bit type? zcrypt_cex4.c:346 ep11_queue_op_modes_show() warn: should '(1 << ep11_op_modes[i]->mode_bit)' be a 64 bit type? Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-03s390/pkey: fix smatch warning inconsistent indentingHarald Freudenberger1-2/+2
Fix smatch warnings: pkey_api.c:1606 pkey_ccacipher_aes_attr_read() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-01s390/tty3270: remove function callback castsOscar Carter1-6/+6
In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, remove all the function callback casts. To do this modify the function prototypes accordingly. Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Message-Id: <20200627125417.18887-1-oscar.carter@gmx.com> Reviewed-by: Kees Cook <keescook@chromium.org> [heiko.carstens@de.ibm.com: coding style changes] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-01dcssblk: don't set bd_block_size in ->openChristoph Hellwig1-1/+0
bd_block_size contains a value that matches the logic block size when opening, so the statement is redundant. Even if it wasn't the dumb assignment would cause a a mismatch with bd_inode->i_blkbits. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig2-8/+7
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig2-2/+2
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-29s390/zcore: remove memmap deviceAlexander Egorenkov1-55/+2
Remove unused /sys/kernel/debug/zcore/memmap device. Since at least version 1.24.0 of s390-tools zfcpdump no longer needs it and reads /proc/vmcore instead. Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-27Merge tag 'scsi-fixes' of ↵Linus Torvalds1-2/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-6/+5
Pull networking fixes from David Miller: 1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen. 2) The default crypto algorithm selection in Kconfig for IPSEC is out of touch with modern reality, fix this up. From Eric Biggers. 3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii Nakryiko. 4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from Hangbin Liu. 5) Adjust packet alignment handling in ax88179_178a driver to match what the hardware actually does. From Jeremy Kerr. 6) register_netdevice can leak in the case one of the notifiers fail, from Yang Yingliang. 7) Use after free in ip_tunnel_lookup(), from Taehee Yoo. 8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir Oltean. 9) tg3 driver can sleep forever when we get enough EEH errors, fix from David Christensen. 10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet drivers, from Ciara Loftus. 11) Fix scanning loop break condition in of_mdiobus_register(), from Florian Fainelli. 12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon. 13) Endianness fix in mlxsw, from Ido Schimmel. 14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen. 15) Missing bridge mrp configuration validation, from Horatiu Vultur. 16) Fix circular netns references in wireguard, from Jason A. Donenfeld. 17) PTP initialization on recovery is not done properly in qed driver, from Alexander Lobakin. 18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong, from Rahul Lakkireddy. 19) Don't clear bound device TX queue of socket prematurely otherwise we get problems with ktls hw offloading, from Tariq Toukan. 20) ipset can do atomics on unaligned memory, fix from Russell King. 21) Align ethernet addresses properly in bridging code, from Thomas Martitz. 22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set, from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits) rds: transport module should be auto loaded when transport is set sch_cake: fix a few style nits sch_cake: don't call diffserv parsing code when it is not needed sch_cake: don't try to reallocate or unshare skb unconditionally ethtool: fix error handling in linkstate_prepare_data() wil6210: account for napi_gro_receive never returning GRO_DROP hns: do not cast return value of napi_gro_receive to null socionext: account for napi_gro_receive never returning GRO_DROP wireguard: receive: account for napi_gro_receive never returning GRO_DROP vxlan: fix last fdb index during dump of fdb with nhid sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket tc-testing: avoid action cookies with odd length. bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT net: dsa: sja1105: fix tc-gate schedule with single element net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules net: dsa: sja1105: unconditionally free old gating config net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top net: macb: free resources on failure path of at91ether_open() net: macb: call pm_runtime_put_sync on failure path ...
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig2-2/+3
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP actionSteffen Maier1-2/+11
Suppose that, for unrelated reasons, FSF requests on behalf of recovery are very slow and can run into the ERP timeout. In the case at hand, we did adapter recovery to a large degree. However due to the slowness a LUN open is pending so the corresponding fc_rport remains blocked. After fast_io_fail_tmo we trigger close physical port recovery for the port under which the LUN should have been opened. The new higher order port recovery dismisses the pending LUN open ERP action and dismisses the pending LUN open FSF request. Such dismissal decouples the ERP action from the pending corresponding FSF request by setting zfcp_fsf_req->erp_action to NULL (among other things) [zfcp_erp_strategy_check_fsfreq()]. If now the ERP timeout for the pending open LUN request runs out, we must not use zfcp_fsf_req->erp_action in the ERP timeout handler. This is a problem since v4.15 commit 75492a51568b ("s390/scsi: Convert timers to use timer_setup()"). Before that we intentionally only passed zfcp_erp_action as context argument to zfcp_erp_timeout_handler(). Note: The lifetime of the corresponding zfcp_fsf_req object continues until a (late) response or an (unrelated) adapter recovery. Just like the regular response path ignores dismissed requests [zfcp_fsf_req_complete() => zfcp_fsf_protstatus_eval() => return early] the ERP timeout handler now needs to ignore dismissed requests. So simply return early in the ERP timeout handler if the FSF request is marked as dismissed in its status flags. To protect against the race where zfcp_erp_strategy_check_fsfreq() dismisses and sets zfcp_fsf_req->erp_action to NULL after our previous status flag check, return early if zfcp_fsf_req->erp_action is NULL. After all, the former ERP action does not need to be woken up as that was already done as part of the dismissal above [zfcp_erp_action_dismiss()]. This fixes the following panic due to kernel page fault in IRQ context: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:000009859238c00b R2:00000e3e7ffd000b R3:00000e3e7ffcc007 S:00000e3e7ffd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP Modules linked in: ... CPU: 82 PID: 311273 Comm: stress Kdump: loaded Tainted: G E X ... Hardware name: IBM 8561 T01 701 (LPAR) Krnl PSW : 0404c00180000000 001fffff80549be0 (zfcp_erp_notify+0x40/0xc0 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000080 00000e3d00000000 00000000000000f0 0000000000030000 000000010028e700 000000000400a39c 000000010028e700 00000e3e7cf87e02 0000000010000000 0700098591cb67f0 0000000000000000 0000000000000000 0000033840e9a000 0000000000000000 001fffe008d6bc18 001fffe008d6bbc8 Krnl Code: 001fffff80549bd4: a7180000 lhi %r1,0 001fffff80549bd8: 4120a0f0 la %r2,240(%r10) #001fffff80549bdc: a53e0003 llilh %r3,3 >001fffff80549be0: ba132000 cs %r1,%r3,0(%r2) 001fffff80549be4: a7740037 brc 7,1fffff80549c52 001fffff80549be8: e320b0180004 lg %r2,24(%r11) 001fffff80549bee: e31020e00004 lg %r1,224(%r2) 001fffff80549bf4: 412020e0 la %r2,224(%r2) Call Trace: [<001fffff80549be0>] zfcp_erp_notify+0x40/0xc0 [zfcp] [<00000985915e26f0>] call_timer_fn+0x38/0x190 [<00000985915e2944>] expire_timers+0xfc/0x190 [<00000985915e2ac4>] run_timer_softirq+0xec/0x218 [<0000098591ca7c4c>] __do_softirq+0x144/0x398 [<00000985915110aa>] do_softirq_own_stack+0x72/0x88 [<0000098591551b58>] irq_exit+0xb0/0xb8 [<0000098591510c6a>] do_IRQ+0x82/0xb0 [<0000098591ca7140>] ext_int_handler+0x128/0x12c [<0000098591722d98>] clear_subpage.constprop.13+0x38/0x60 ([<000009859172ae4c>] clear_huge_page+0xec/0x250) [<000009859177e7a2>] do_huge_pmd_anonymous_page+0x32a/0x768 [<000009859172a712>] __handle_mm_fault+0x88a/0x900 [<000009859172a860>] handle_mm_fault+0xd8/0x1b0 [<0000098591529ef6>] do_dat_exception+0x136/0x3e8 [<0000098591ca6d34>] pgm_check_handler+0x1c8/0x220 Last Breaking-Event-Address: [<001fffff80549c88>] zfcp_erp_timeout_handler+0x10/0x18 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt Link: https://lore.kernel.org/r/20200623140242.98864-1-maier@linux.ibm.com Fixes: 75492a51568b ("s390/scsi: Convert timers to use timer_setup()") Cc: <stable@vger.kernel.org> #4.15+ Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-06-18s390/qeth: let isolation mode override HW offload restrictionsJulian Wiedmann1-2/+4
When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: fix error handling for isolation mode cmdsJulian Wiedmann1-4/+1
Current(?) OSA devices also store their cmd-specific return codes for SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code. So once we added stricter checking for the top-level field a while ago, none of the error logic that rolls back the user's configuration to its old state is applied any longer. For this specific cmd, go back to the old model where we peek into the cmd structure even though the top-level field indicated an error. Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-17s390/qdio: warn about unexpected SLSB statesJulian Wiedmann1-5/+11
The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: clean up usage of qdio_dataJulian Wiedmann1-10/+7
This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/zcrypt: use kzallocZou Wei1-2/+1
This patch fixes below warning reported by coccicheck drivers/s390/crypto/zcrypt_ep11misc.c:198:8-15: WARNING: kzalloc should be used for cprb, instead of kmalloc/memset Link: https://lkml.kernel.org/r/1587472548-105240-1-git-send-email-zou_wei@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/virtio: remove unused pm callbacksCornelia Huck1-26/+0
Support for hibernation on s390 has been recently been removed with commit 394216275c7d ("s390: remove broken hibernate / power management support"), no need to keep unused code around. Link: https://lkml.kernel.org/r/20200526093629.257649-1-cohuck@redhat.com Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-15 09:00:00 +0000