summaryrefslogtreecommitdiffstats
path: root/drivers/s390/net
AgeCommit message (Collapse)AuthorFilesLines
2018-08-09s390/qeth: use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: don't restrict qeth_card to DMA memoryJulian Wiedmann3-14/+19
Allocating the main qeth_card struct with GFP_DMA blocks us from moving it into netdev_priv(). But the only reason why we need DMA memory is the ccw1 structs embedded into each ccw channel. So extract those into separate allocations, like we already do for the cmd buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: clean up card initializationJulian Wiedmann1-34/+10
The qeth_card struct is kzalloc-ed, so remove all the redundant 0-initializations. While at it, split up what's left of qeth_determine_card_type(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: do basic setup for data channelJulian Wiedmann1-9/+15
The data channel currently doesn't need a setup operation, because we don't use pre-allocated cmd buffers for its IO. But subsequent changes will introduce further setup that also applies to the data channel. This refactors things a bit, so that the new stuff can then be automatically applied to all channels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: use qeth_setup_ccw() to set up all CCWsJulian Wiedmann4-43/+16
Re-work the helper a little bit, so that it can be used for all CCWs that qeth issues. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: reduce hard-coded access to ccw channelsJulian Wiedmann2-28/+31
Where possible use accessor macros and local pointers to access the ccw channels. This makes it less likely to miss a spot. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09s390/qeth: extract helper for MPC protocol typeJulian Wiedmann3-24/+15
Just a little code deduplication. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: speed up L2 IQD xmitJulian Wiedmann3-56/+30
Modify the L2 OSA xmit path so that it also supports L2 IQD devices (in particular, their HW header requirements). This allows IQD devices to advertise NETIF_F_SG support, and eliminates the allocation overhead for the HW header. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: add support for constrained HW headersJulian Wiedmann4-22/+30
Some transmit modes require that the HW header is located in the same page as the initial protocol headers in skb->data. Let callers specify the size of this contiguous header range, and enforce it when building the HW header. While at it, apply some gentle renaming to the relevant L2 code so that it matches the L3 code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: merge linearize-check into HW header constructionJulian Wiedmann4-70/+80
When checking whether an skb needs to be linearized to fit into an IO buffer, it's desirable to consider the skb's final size and layout (ie. after the HW header was added). But a subsequent linearization can then cause the re-positioned HW header to violate its alignment restrictions. Dealing with this situation in two different code paths is quite tricky. This patch integrates a) linearize-check and b) HW header construction into one 3 step-sequence: 1. evaluate how the HW header needs to be added (to identify if it takes up an additional buffer element), then 2. check if the required buffer elements exceed the device's limit. Linearize when necessary and re-evaluate the HW header placement. 3. Add the HW header in the best-possible way: a) push, without taking up an additional buffer element b) push, but consume another buffer element c) allocate a header object from the cache. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: add statistics for consumed buffer elementsJulian Wiedmann4-23/+24
Nowadays an skb fragment typically spans over multiple pages. So replace the obsolete, SG-only 'fragments' counter with one that tracks the consumed buffer elements. This is what actually matters for performance. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: use core MTU range checkingJulian Wiedmann5-37/+2
qeth's ndo_change_mtu() only applies some trivial bounds checking. Set up dev->min_mtu properly, so that dev_set_mtu() can do this for us. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: simplify max MTU handlingJulian Wiedmann4-41/+45
When the MPC initialization code discovers the HW-specific max MTU, apply the resulting changes straight to the netdevice. If this is the device's first initialization, also set its MTU (HiperSockets: the max MTU; else: a layer-specific default value). Then cap the current MTU by the new max MTU. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: don't cache HW port numberJulian Wiedmann3-7/+4
The netdevice is always available now, so get the portno from there. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: allocate netdevice earlyJulian Wiedmann6-88/+94
Allocation of the netdevice is currently delayed until a qeth card first goes online. This complicates matters in several places, where we need to cache values instead of applying them straight to the netdevice. Improve on this by moving the allocation up to where the qeth card itself is created. This is also one step in direction of eventually placing the qeth card into netdev_priv(). In all subsequent code, remove the now redundant checks whether card->dev is valid. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: remove redundant netif_carrier_ok() checksJulian Wiedmann3-3/+3
netif_carrier_off() does its own checking. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: reset layer2 attribute on layer switchJulian Wiedmann1-0/+1
After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field. If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21s390/qeth: fix race in used-buffer accountingJulian Wiedmann1-1/+2
By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: speed-up IPv4 OSA xmitJulian Wiedmann1-12/+21
Move the xmit of offload-eligible (ie IPv4) traffic on OSA over to the new, copy-free path. As with L2, we'll need to preserve the skb_orphan() behaviour of the old code path until TX completion is sufficiently fast. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: speed-up L3 IQD xmitJulian Wiedmann1-83/+128
This implements a new xmit path for L3 HiperSockets, which carves the HW header from skb headroom instead of allocating it from the hdr cache. It also adds NETIF_F_SG support. The delta in qeth_l3_xmit() is all just removal of IQD-specific code and some minor consolidation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: add a L3 xmit wrapperJulian Wiedmann1-57/+65
In preparation for future work, move the high-level xmit work into a separate wrapper. This matches the L2 xmit code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: increase GSO max size for eligible L3 devicesJulian Wiedmann1-2/+3
When a L3 device doesn't offer TSO, allow the stack to build full-size GSO skbs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: clean up exported symbolsJulian Wiedmann4-13/+8
Remove some redundant EXPORTs. While at it, also move some L2-only prototypes into the proper header file. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: consolidate ccwgroup driver definitionJulian Wiedmann1-21/+21
Reshuffle the code a bit so that everything is in one place. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: clean up Output Queue selectionJulian Wiedmann5-27/+27
Consolidate duplicated code, fix the misuse of RTN_UNSPEC and simplify the handling of non-unicast traffic on IQD devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: fine-tune RX modesettingJulian Wiedmann2-7/+5
Changing a device's address lists (or its promisc mode) already triggers an RX modeset, there's no need to do it manually from the L2 driver's ndo_vlan_rx_kill_vid() hook. Also when setting a device online, dev_open() already calls dev_set_rx_mode(). So a manual modeset is only necessary from the recovery path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: remove unused buffer->aob pointerJulian Wiedmann2-8/+0
Except for tracing, the pointer is not used. At the same time, accessing it from qeth_qdio_output_handler() is racy: whenever qeth_qdio_cq_handler() gets control, its call to qeth_qdio_handle_aob() frees the AOB. So the AOB pointer that qeth_qdio_output_handler() stores into 'buffer' can go stale at any time, and trigger a use-after-free. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12s390/qeth: various buffer management cleanupsJulian Wiedmann1-46/+20
Use the new qeth_scrub_qdio_buffer() helper, remove an extra parameter from qeth_clear_output_buffer(), init the bufstates.user field just once (in qeth_flush_buffers()) and remove some noisy trace messages. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-30/+57
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: consistently re-enable device featuresJulian Wiedmann4-17/+16
commit e830baa9c3f0 ("qeth: restore device features after recovery") and commit ce3443564145 ("s390/qeth: rely on kernel for feature recovery") made sure that the HW functions for device features get re-programmed after recovery. But we missed that the same handling is also required when a card is first set offline (destroying all HW context), and then online again. Fix this by moving the re-enable action out of the recovery-only path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: don't clobber buffer on async TX completionJulian Wiedmann2-6/+27
If qeth_qdio_output_handler() detects that a transmit requires async completion, it replaces the pending buffer's metadata object (qeth_qdio_out_buffer) so that this queue buffer can be re-used while the data is pending completion. Later when the CQ indicates async completion of such a metadata object, qeth_qdio_cq_handler() tries to free any data associated with this object (since HW has now completed the transfer). By calling qeth_clear_output_buffer(), it erronously operates on the queue buffer that _previously_ belonged to this transfer ... but which has been potentially re-used several times by now. This results in double-free's of the buffer's data, and failing transmits as the buffer descriptor is scrubbed in mid-air. The correct way of handling this situation is to 1. scrub the queue buffer when it is prepared for re-use, and 2. later obtain the data addresses from the async-completion notifier (ie. the AOB), instead of the queue buffer. All this only affects qeth devices used for af_iucv HiperTransport. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]Vasily Gorbik1-2/+2
*ether_addr*_64bits functions have been introduced to optimize performance critical paths, which access 6-byte ethernet address as u64 value to get "nice" assembly. A harmless hack works nicely on ethernet addresses shoved into a structure or a larger buffer, until busted by Kasan on smth like plain (u8 *)[6]. qeth_l2_set_mac_address calls qeth_l2_remove_mac passing u8 old_addr[ETH_ALEN] as an argument. Adding/removing macs for an ethernet adapter is not that performance critical. Moreover is_multicast_ether_addr_64bits itself on s390 is not faster than is_multicast_ether_addr: is_multicast_ether_addr(%r2) -> %r2 llc %r2,0(%r2) risbg %r2,%r2,63,191,0 is_multicast_ether_addr_64bits(%r2) -> %r2 llgc %r2,0(%r2) risbg %r2,%r2,63,191,0 So, let's just use is_multicast_ether_addr instead of is_multicast_ether_addr_64bits. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/qeth: fix race when setting MAC addressJulian Wiedmann1-4/+11
When qeth_l2_set_mac_address() finds the card in a non-reachable state, it merely copies the new MAC address into dev->dev_addr so that __qeth_l2_set_online() can later register it with the HW. But __qeth_l2_set_online() may very well be running concurrently, so we can't trust the card state without appropriate locking: If the online sequence is past the point where it registers dev->dev_addr (but not yet in SOFTSETUP state), any address change needs to be properly programmed into the HW. Otherwise the netdevice ends up with a different MAC address than what's set in the HW, and inbound traffic is not forwarded as expected. This is most likely to occur for OSD in LPAR, where commit 21b1702af12e ("s390/qeth: improve fallback to random MAC address") now triggers eg. systemd to immediately change the MAC when the netdevice is registered with a NET_ADDR_RANDOM address. Fixes: bcacfcbc82b4 ("s390/qeth: fix MAC address update sequence") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30Revert "s390/qeth: use Read device to query hypervisor for MAC"Julian Wiedmann1-1/+1
This reverts commit b7493e91c11a757cf0f8ab26989642ee4bb2c642. On its own, querying RDEV for a MAC address works fine. But when upgrading from a qeth that previously queried DDEV on a z/VM NIC (ie. any kernel with commit ec61bd2fd2a2), the RDEV query now returns a _different_ MAC address than the DDEV query. If the NIC is configured with MACPROTECT, z/VM apparently requires us to use the MAC that was initially returned (on DDEV) and registered. So after upgrading to a kernel that uses RDEV, the SETVMAC registration cmd for the new MAC address fails and we end up with a non-operabel interface. To avoid regressions on upgrade, switch back to using DDEV for the MAC address query. The downgrade path (first RDEV, later DDEV) is fine, in this case both queries return the same MAC address. Fixes: b7493e91c11a ("s390/qeth: use Read device to query hypervisor for MAC") Reported-by: Michal Kubecek <mkubecek@suse.com> Tested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30s390/ism: add device driver for internal shared memorySebastian Ott4-0/+857
Add support for the Internal Shared Memory vPCI Adapter. This driver implements the interfaces of the SMC-D protocol. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook2-13/+16
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds7-292/+229
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-02Merge branch 'timers/urgent' into timers/coreThomas Gleixner5-117/+117
Pick up urgent fixes to apply dependent cleanup patch
2018-04-27s390/qeth: improve fallback to random MAC addressJulian Wiedmann1-10/+13
If READ MAC fails to fetch a valid MAC address, allow some more device types (IQD and z/VM OSD) to fall back to a random address. Also use eth_hw_addr_random(), for indicating to userspace that the address type is NET_ADDR_RANDOM. Note that while z/VM has various protection schemes to prohibit custom addresses on its NICs, they are all optional. So we should at least give it a try. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: add IPv6 RX checksum offload supportKittipon Meesompop3-8/+33
Check if a qeth device supports IPv6 RX checksum offload, and hook it up into the existing NETIF_F_RXCSUM support. As NETIF_F_RXCSUM is now backed by a combination of HW Assists, we need to be a little smarter when dealing with errors during a configuration change: - switching on NETIF_F_RXCSUM only makes sense if at least one HW Assist was enabled successfully. - for switching off NETIF_F_RXCSUM, all available HW Assists need to be deactivated. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: add IPv6 TX checksum offload supportKittipon Meesompop5-15/+38
Check if a qeth device supports IPv6 TX checksum offload, and advertise NETIF_F_IPV6_CSUM accordingly. Add support for setting the relevant bits in IPv6 packet descriptors. Currently this has only limited use (ie. UDP, or Jumbo Frames). For any TCP traffic with a standard MSS, the TCP checksum gets calculated as part of the linear GSO segmentation. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: extend Checksum Offload Assists for IPv6Kittipon Meesompop3-52/+60
Add some wrappers to make the protocol-specific Assist code a little more generic, and use them for sending protocol-agnostic commands in the Checksum Offload Assist code. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: query IPv6 assists during hardsetupKittipon Meesompop2-8/+5
For new functionality, the L2 subdriver will start using IPv6 assists. So move the query from the L3 subdriver into the common setup path. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: add stats counter for RX csum offloadKittipon Meesompop2-3/+9
This matches the statistics we gather for the TX offload path. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: disregard IPv4 header for RX csum offloadJulian Wiedmann1-1/+0
The kernel does its own validation of the IPv4 header checksum, drivers/HW are not required to handle this. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: extract csum offload helpersJulian Wiedmann3-59/+33
This consolidates the checksum offload code that was duplicated over the two qeth subdrivers. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: de-indent else after returnKittipon Meesompop1-22/+21
Trivial cleanup, in preparation for a subsequent patch. Signed-off-by: Kittipon Meesompop <kmeesomp@linux.vnet.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/net: set HW port number in netdeviceUrsula Braun4-0/+7
struct net_device contains a dev_port field. Store the OSA port number in this field. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: don't worry about IPs on VLAN removalJulian Wiedmann1-87/+0
When removing a VLAN ID on a L3 device, the driver currently attempts to walk and unregister the VLAN device's IP addresses. This can be safely removed - before qeth_l3_vlan_rx_kill_vid() even gets called, we receive an inet[6]addr event for each IP on the device and qeth_l3_handle_ip_event() unregisters the address accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27s390/qeth: convert vlan spinlock to mutexJulian Wiedmann3-9/+10
As the vid_list is only accessed from process context, there's no need to protect it with a spinlock. Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-10 22:11:42 +0000