summaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio
AgeCommit message (Collapse)AuthorFilesLines
2021-06-07s390/ccwgroup: use BUS_NOTIFY_UNBOUND_DRIVER to trigger ungroupingJulian Wiedmann1-1/+1
ccwgroup_notifier() currently listens for BUS_NOTIFY_UNBIND_DRIVER events, and triggers an ungrouping for the affected device. Looking at __device_release_driver(), we can wait for a little longer until the driver has been fully unbound and eg. bus->remove() has been called. So listen for BUS_NOTIFY_UNBOUND_DRIVER instead. Due to locking the current code should work just fine, but this clarifies our intent. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-07s390/ccwgroup: simplify ungrouping when driver deregistersJulian Wiedmann1-9/+0
driver_unregister() ends up calling __device_release_driver() for each device that is bound to the driver. Thus ccwgroup_notifier() will see a BUS_NOTIFY_UNBIND_DRIVER event for these ccwgroup devices, and trigger the ungrouping. So there's no need to also trigger the ungrouping from within ccwgroup_driver_unregister(), remove it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-06-07s390/ccwgroup: release the cdevs from within dev->release()Julian Wiedmann1-32/+17
Wiring up the cdevs is an essential part of the gdev creation. So release them during the gdev destruction, ie. on the last put_device(). This could cause us to hold on to the cdevs a tiny bit longer, but that's not a real concern. As we have much less certainty of what context this put_device() is executed from, switch to irqsave locking. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-05-12vfio-ccw: Serialize FSM IDLE state with I/O completionEric Farman1-2/+10
Today, the stacked call to vfio_ccw_sch_io_todo() does three things: 1) Update a solicited IRB with CP information, and release the CP if the interrupt was the end of a START operation. 2) Copy the IRB data into the io_region, under the protection of the io_mutex 3) Reset the vfio-ccw FSM state to IDLE to acknowledge that vfio-ccw can accept more work. The trouble is that step 3 is (A) invoked for both solicited and unsolicited interrupts, and (B) sitting after the mutex for step 2. This second piece becomes a problem if it processes an interrupt for a CLEAR SUBCHANNEL while another thread initiates a START, thus allowing the CP and FSM states to get out of sync. That is: CPU 1 CPU 2 fsm_do_clear() fsm_irq() fsm_io_request() vfio_ccw_sch_io_todo() fsm_io_helper() Since the FSM state and CP should be kept in sync, let's make a note when the CP is released, and rely on that as an indication that the FSM should also be reset at the end of this routine and open up the device for more work. Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20210511195631.3995081-4-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-05-12vfio-ccw: Reset FSM state to IDLE inside FSMEric Farman2-2/+1
When an I/O request is made, the fsm_io_request() routine moves the FSM state from IDLE to CP_PROCESSING, and then fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL received a cc0. Yet, the error case to go from CP_PROCESSING back to IDLE is done after the FSM call returns. Let's move this up into the FSM proper, to provide some better symmetry when unwinding in this case. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20210511195631.3995081-3-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-05-12vfio-ccw: Check initialized flag in cp_init()Eric Farman1-0/+4
We have a really nice flag in the channel_program struct that indicates if it had been initialized by cp_init(), and use it as a guard in the other cp accessor routines, but not for a duplicate call into cp_init(). The possibility of this occurring is low, because that flow is protected by the private->io_mutex and FSM CP_PROCESSING state. But then why bother checking it in (for example) cp_prefetch() then? Let's just be consistent and check for that in cp_init() too. Fixes: 71189f263f8a3 ("vfio-ccw: make it safe to access channel programs") Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20210511195631.3995081-2-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-05-06Merge tag 's390-5.13-2' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - add support for system call stack randomization - handle stale PCI deconfiguration events - couple of defconfig updates - some fixes and cleanups * tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility s390/entry: add support for syscall stack randomization s390/configs: change CONFIG_VIRTIO_CONSOLE to "m" s390/cio: remove invalid condition on IO_SCH_UNREG s390/cpumf: remove call to perf_event_update_userpage s390/cpumf: move counter set size calculation to common place s390/cpumf: beautify if-then-else indentation s390/configs: enable CONFIG_PCI_IOV s390/pci: handle stale deconfiguration events s390/pci: rename zpci_configure_device()
2021-04-30s390/cio: remove invalid condition on IO_SCH_UNREGVineeth Vijayan1-2/+1
The condition to check the cdev pointer validity on css_sch_device_unregister() is a leftover from the 'commit 8cc0dcfdc1c0 ("s390/cio: remove pm support from ccw bus driver")'. This could lead to a situation, where detaching the device is not happening completely. Remove this invalid condition in the IO_SCH_UNREG case. Link: https://lore.kernel.org/r/20210423100843.2230969-1-vneethv@linux.ibm.com Fixes: 8cc0dcfdc1c0 ("s390/cio: remove pm support from ccw bus driver") Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Suggested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Tested-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-28Merge tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds1-7/+10
Pull VFIO updates from Alex Williamson: - Embed struct vfio_device into vfio driver structures (Jason Gunthorpe) - Make vfio_mdev type safe (Jason Gunthorpe) - Remove vfio-pci NVLink2 extensions for POWER9 (Christoph Hellwig) - Update vfio-pci IGD extensions for OpRegion 2.1+ (Fred Gao) - Various spelling/blank line fixes (Zhen Lei, Zhou Wang, Bhaskar Chowdhury) - Simplify unpin_pages error handling (Shenming Lu) - Fix i915 mdev Kconfig dependency (Arnd Bergmann) - Remove unused structure member (Keqian Zhu) * tag 'vfio-v5.13-rc1' of git://github.com/awilliam/linux-vfio: (43 commits) vfio/gvt: fix DRM_I915_GVT dependency on VFIO_MDEV vfio/iommu_type1: Remove unused pinned_page_dirty_scope in vfio_iommu vfio/mdev: Correct the function signatures for the mdev_type_attributes vfio/mdev: Remove kobj from mdev_parent_ops->create() vfio/gvt: Use mdev_get_type_group_id() vfio/gvt: Make DRM_I915_GVT depend on VFIO_MDEV vfio/mbochs: Use mdev_get_type_group_id() vfio/mdpy: Use mdev_get_type_group_id() vfio/mtty: Use mdev_get_type_group_id() vfio/mdev: Add mdev/mtype_get_type_group_id() vfio/mdev: Remove duplicate storage of parent in mdev_device vfio/mdev: Add missing error handling to dev_set_name() vfio/mdev: Reorganize mdev_device_create() vfio/mdev: Add missing reference counting to mdev_type vfio/mdev: Expose mdev_get/put_parent to mdev_private.h vfio/mdev: Use struct mdev_type in struct mdev_device vfio/mdev: Simplify driver registration vfio/mdev: Add missing typesafety around mdev_device vfio/mdev: Do not allow a mdev_type to have a NULL parent pointer vfio/mdev: Fix missing static's on MDEV_TYPE_ATTR's ...
2021-04-12vfio/mdev: Correct the function signatures for the mdev_type_attributesJason Gunthorpe1-6/+9
The driver core standard is to pass in the properly typed object, the properly typed attribute and the buffer data. It stems from the root kobject method: ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr,..) Each subclass of kobject should provide their own function with the same signature but more specific types, eg struct device uses: ssize_t (*show)(struct device *dev, struct device_attribute *attr,..) In this case the existing signature is: ssize_t (*show)(struct kobject *kobj, struct device *dev,..) Where kobj is a 'struct mdev_type *' and dev is 'mdev_type->parent->dev'. Change the mdev_type related sysfs attribute functions to: ssize_t (*show)(struct mdev_type *mtype, struct mdev_type_attribute *attr,..) In order to restore type safety and match the driver core standard There are no current users of 'attr', but if it is ever needed it would be hard to add in retroactively, so do it now. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <18-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-12vfio/mdev: Remove kobj from mdev_parent_ops->create()Jason Gunthorpe1-1/+1
The kobj here is a type-erased version of mdev_type, which is already stored in the struct mdev_device being passed in. It was only ever used to compute the type_group_id, which is now extracted directly from the mdev. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Message-Id: <17-v2-d36939638fc6+d54-vfio2_jgg@nvidia.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-04-12s390/cio: use DECLARE_WAIT_QUEUE_HEAD for static work_queue_head_tVineeth Vijayan1-2/+1
Use DECLARE_WAIT_QUEUE_HEAD to declare and statically initialize the work_queue_head_t. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-05s390/cio: use DECLARE_WAIT_QUEUE_HEAD() for wait_queueShixin Liu1-2/+1
wait_queue_head_t can be initialized automatically with DECLARE_WAIT_QUEUE_HEAD() rather than explicitly calling init_waitqueue_head(). Signed-off-by: Shixin Liu <liushixin2@huawei.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-05s390/cio: use DEFINE_SPINLOCK() for spinlockShixin Liu1-2/+1
static spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Signed-off-by: Shixin Liu <liushixin2@huawei.com> Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22s390/qdio: let driver manage the QAOBJulian Wiedmann3-113/+9
We are spending way too much effort on qdio-internal bookkeeping for QAOB management & caching, and it's still not robust. Once qdio's TX path has detached the QAOB from a PENDING buffer, we lost all track of it until it shows up in a CQ notification again. So if the device is torn down before that notification arrives, we leak the QAOB. Just have the driver take care of it, and simply pass down a QAOB if they want a TX with async-completion capability. For a buffer in PENDING state that requires the QAOB for final completion, qeth can now also try to recycle the buffer's QAOB rather than unconditionally freeing it. This also eliminates the qdio_outbuf_state array, which was only needed to transfer the aob->user1 tag from the driver to the qdio layer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22s390/cio: add CRW inject functionalityVineeth Vijayan4-1/+213
This patch introduces the mechanism to inject artificial events to the CIO layer. One of the main-event type which triggers the CommonIO operations are Channel Report events. When a malfunction or other condition affecting channel-subsystem operation is recognized, a Channel Report Word (consisting of one or more CRWs) describing the condition is made pending for retrieval and analysis by the program. The CRW contains information concerning the identity and state of a facility following the detection of the malfunction or other condition. The patch introduces two debugfs interfaces which can be used to inject 'artificial' events from the userspace. It is intended to provide an easy means to increase the test coverage for CIO code. And this functionality can be enabled via a new configuration option CONFIG_CIO_INJECT. The newly introduces debugfs interfaces can be used as mentioned below to generate different fake-events. To use the crw_inject, first we should enable it by using enable_inject interface. i.e echo 1 > /sys/kernel/debug/s390/cio/enable_inject After the first step, user can simulate CRW as follows: echo <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid> \ > /sys/kernel/debug/s390/cio/crw_inject Example: A permanent error ERC on CHPID 0x60 would look like this: echo 0 0 0 4 0 6 0x60 > /sys/kernel/debug/s390/cio/crw_inject and an initialized ERC on the same CHPID: echo 0 0 0 4 0 2 0x60 > /sys/kernel/debug/s390/cio/crw_inject Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22s390/cio: introduce CIO debugfs directoryVineeth Vijayan3-1/+27
This patch introduces an s390 Common I/O layer debugfs directory that is intended to provide access to debugging-related CIO functions and data. The directory is created as /sys/kernel/debug/s390/cio Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/cio: return -EFAULT if copy_to_user() failsEric Farman1-1/+1
Fixes: 120e214e504f ("vfio: ccw: realize VFIO_DEVICE_G(S)ET_IRQ_INFO ioctls") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/cio: return -EFAULT if copy_to_user() failsWang Qing1-2/+2
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Fixes: e01bcdd61320 ("vfio: ccw: realize VFIO_DEVICE_GET_REGION_INFO ioctl") Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Link: https://lore.kernel.org/r/1614600093-13992-1-git-send-email-wangqing@vivo.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-08s390/time,idle: get rid of unsigned long longHeiko Carstens1-1/+1
Get rid of unsigned long long, and use unsigned long instead everywhere. The usage of unsigned long long is a leftover from 31 bit kernel support. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-02-13s390/qdio: remove 'merge_pending' mechanismJulian Wiedmann1-50/+9
For non-QEBSM devices, get_buf_states() merges PENDING and EMPTY buffers into a single group of finished buffers. To allow the upper-layer driver to differentiate between the two states, qdio_check_pending() looks at each buffer's state again and sets the sbal_state flag to QDIO_OUTBUF_STATE_FLAG_PENDING accordingly. So effectively we're spending overhead on _every_ Output Queue inspection, just to avoid some additional TX completion calls in case a group of buffers has completed with mixed EMPTY / PENDING state. Given that PENDING buffers should rarely occur, this is a bad trade-off. In particular so as the additional checks in get_buf_states() affect _all_ device types (even those that don't use the PENDING state). Rip it all out, and just report the PENDING completions separately as we already do for QEBSM devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-13s390/qdio: improve handling of PENDING buffers for QEBSM devicesJulian Wiedmann1-2/+9
For QEBSM devices the 'merge_pending' mechanism in get_buf_states() doesn't apply, and we can actually get SLSB_P_OUTPUT_PENDING returned. So for this case propagating the PENDING state to the driver via the queue's sbal_state doesn't make sense and creates unnecessary overhead. Instead introduce a new QDIO_ERROR_* flag that gets passed to the driver, and triggers the same processing as if the buffers were flagged as QDIO_OUTBUF_STATE_FLAG_PENDING. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-13s390/qdio: rework q->qdio_error indicationJulian Wiedmann2-19/+16
When inspecting a queue, any error is currently returned back through the queue's qdio_error field. Turn this into a proper variable that gets passed through the call chain, so that the lifetime is clear and the error state can be accessed along the way. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-13s390/qdio: inline qdio_kick_handler()Julian Wiedmann3-25/+12
We don't kick the handler for Input Queues anymore. Move the remaining code into its only caller. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-09s390/qdio: track time of last data IRQ for each deviceJulian Wiedmann4-3/+8
We currently track the time of the most recent QDIO Adapter Interrupt. This is a system-wide timestamp (as such interrupts are not bound to one specific qdio device). If interrupt processing stalls on one device but is functional for a different device, the timestamp continues to be updated and is of no help for problem diagnosis. So for debugging purposes also track the time of the last Data IRQ on a per-device level. Collect this data in the legacy non-AI path as well. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-09s390/qdio: make thinint registration symmetricJulian Wiedmann3-25/+12
tiqdio_add_device() adds the device to the tiq_list of eligible targets for a data IRQ, which gets walked on each QDIO Adapter Interrupt to inspect their DSCIs. But currently the tiqdio_add_device() / tiqdio_remove_device() calls are not symmetric - the device is removed within qdio_shutdown(), but only added by qdio_activate(). So depending on the call sequence and encountered errors, we might be trying to remove a list entry in qdio_shutdown() that was never even added to the list. This required additional INIT_LIST_HEAD() calls to ensure that the list entry was always in a consistent state. All drivers now fence the IRQ delivery via qdio_start_irq() / qdio_stop_irq(), so we can nicely integrate this tiq_list management with the other steps needed for QDIO Adapter IRQ (de-)registration (qdio_establish_thinint() / qdio_shutdown_thinint()). As the naming suggests these get called during qdio_establish() and qdio_shutdown(), with proper symmetry and roll-back after errors. With this we longer need to worry about misplaced list removals, and thus can clean up the list API abuse (INIT_LIST_HEAD() should not be called on list entries). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-09s390/qdio: adopt new tasklet APIJulian Wiedmann3-11/+5
Convert the Output Queue tasklet code to take a tasklet_struct as parameter. Then initialize the tasklet with tasklet_setup() to indicate that we follow the new model. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-09s390/qdio: remove qdio_inbound_q_moved() wrapperJulian Wiedmann1-6/+1
It's used in just one place, inline it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-02-09s390/qdio: remove Input tasklet codeJulian Wiedmann5-119/+26
Both qeth and zfcp have fully moved to the polling-driven flow for Input Queues with commit 0a6e634535f1 ("s390/qdio: extend polling support to multiple queues") and commit 0b524abc2dd1 ("scsi: zfcp: Lift Input Queue tasklet from qdio"). So remove the tasklet code for Input Queues, streamline the IRQ handlers and push the tasklet struct into struct qdio_output_q. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-19s390/cio: use dma helpers for setting masksJulian Wiedmann2-12/+34
Bypassing the DMA API is bad style, even when we don't expect any actual problems. Let's utilize the right API helpers for setting the DMA masks and check for returned errors, so that we benefit from common sanity checks. io_subchannel_allocate_dev() required some extra massaging, so that we can return an errno other than -ENOMEM. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-01-19s390/cio: remove ccw_device_add() wrapperJulian Wiedmann1-10/+3
Set the bus type when initializing the cdev structure. The device core won't act on it until we call device_add(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-12-18Merge tag 's390-5.11-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "This is mainly to decouple udelay() and arch_cpu_idle() and simplify both of them. Summary: - Always initialize kernel stack backchain when entering the kernel, so that unwinding works properly. - Fix stack unwinder test case to avoid rare interrupt stack corruption. - Simplify udelay() and just let it busy loop instead of implementing a complex logic. - arch_cpu_idle() cleanup. - Some other minor improvements" * tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: convert comma to semicolon s390/idle: allow arch_cpu_idle() to be kprobed s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle() s390/idle: merge enabled_wait() and arch_cpu_idle() s390/delay: remove udelay_simple() s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK s390/delay: simplify udelay s390/test_unwind: use timer instead of udelay s390/test_unwind: fix CALL_ON_STACK tests s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced s390: always clear kernel stack backchain before calling functions
2020-12-16Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-0/+30
Pull VFIO updates from Alex Williamson: - Fix uninitialized list walk in error path (Eric Auger) - Use io_remap_pfn_range() (Jason Gunthorpe) - Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy) - Enable mdev request interrupt with CCW support (Eric Farman) - Enable interface to iommu_domain from vfio_group (Lu Baolu) * tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Add vfio_group_iommu_domain() vfio-ccw: Wire in the request callback vfio-mdev: Wire in a request handler for mdev parent vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU vfio-pci: Use io_remap_pfn_range() for PCI IO memory vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds5-11/+168
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-16s390/delay: remove udelay_simple()Heiko Carstens1-1/+1
udelay_simple() callers can make use of the now simplified udelay() implementation. No need to keep it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-15Merge tag 'net-next-5.11' of ↵Linus Torvalds1-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-09s390/cio: fix use-after-free in ccw_device_destroy_consoleQinglang Miao1-2/+2
Use of sch->dev reference after the put_device() call could trigger the use-after-free bugs. Fix this by simply adjusting the position of put_device. Fixes: 37db8985b211 ("s390/cio: add basic protected virtualization support") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> [vneethv@linux.ibm.com: Slight modification in the commit-message] Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-07s390/ccwgroup: use bus->dev_groups for bus-based sysfs attributesJulian Wiedmann1-9/+3
Bus drivers have their own way of describing the sysfs attributes that all devices on a bus should provide. Switch ccwgroup_attr_groups over to use bus->dev_groups, and thus free up dev->groups for usage by the ccwgroup device drivers. While adjusting the attribute naming, use ATTRIBUTE_GROUPS() to get rid of some boilerplate code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-03vfio-ccw: Wire in the request callbackEric Farman2-0/+30
The device is being unplugged, so pass the request to userspace to ask for a graceful cleanup. This should free up the thread that would otherwise loop waiting for the device to be fully released. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-12-02s390/cio: remove pm support from ccw bus driverVineeth Vijayan5-258/+2
As part of removing broken pm-support from s390 arch, remove the pm callbacks from ccw-bus driver.The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from css-bus driverVineeth Vijayan2-139/+1
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove the unused pm callbacks from css-bus driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from IO subchannel driversVineeth Vijayan1-14/+0
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove these unused pm callbacks from io-subchannel drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from chsc subchannel driverVineeth Vijayan1-29/+0
As part of removing the broken pm-support from s390 arch, remove the pm-calls from chsc subchannel driver. The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from eadm-sch driversVineeth Vijayan1-13/+0
The 'commit 394216275c7d ("s390: remove broken hibernate / power management support")' removes the pm-support. Remove the unused functions in eadm-sch drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16s390/cio: Add support for FCES status notificationVineeth Vijayan3-10/+68
Fibre Channel Endpoint-Security event is received as an sei:nt0 type in the CIO layer. This information needs to be shared with the CCW device drivers using the path_events callback. Co-developed-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16s390/cio: Provide Endpoint-Security Mode per CUVineeth Vijayan1-0/+83
Add an interface in the CIO layer to retrieve the information about the Endpoint-Security Mode (ESM) of the specified CU. The ESM values are defined as 0-None, 1-Authenticated or 2, 3-Encrypted. [vneethv@linux.ibm.com: cleaned-up and modified description] Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16s390/cio: Export information about Endpoint-Security CapabilitySebastian Ott2-1/+17
Add a new sysfs attribute 'esc' per chpid. This new attribute exports the Endpoint-Security-Capability byte of channel-path description block, which could be 0-None, 1-Authentication, 2 and 3-Encryption. For example: $ cat /sys/devices/css0/chp0.34/esc 0 [vneethv@linux.ibm.com: cleaned-up & modified description] Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds5-59/+58
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-09-30s390: remove orphaned function declarationsVasily Gorbik1-1/+0
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/cio: remove unused channel_subsystem_reinitVasily Gorbik1-14/+0
Added with commit 77e844b96440 ("s390/hibernate: add early resume function") unused since commit 394216275c7d ("s390: remove broken hibernate / power management support"). Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-03 05:06:23 +0000