summaryrefslogtreecommitdiffstats
path: root/drivers/s390/cio
AgeCommit message (Collapse)AuthorFilesLines
2020-12-18Merge tag 's390-5.11-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: "This is mainly to decouple udelay() and arch_cpu_idle() and simplify both of them. Summary: - Always initialize kernel stack backchain when entering the kernel, so that unwinding works properly. - Fix stack unwinder test case to avoid rare interrupt stack corruption. - Simplify udelay() and just let it busy loop instead of implementing a complex logic. - arch_cpu_idle() cleanup. - Some other minor improvements" * tag 's390-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: convert comma to semicolon s390/idle: allow arch_cpu_idle() to be kprobed s390/idle: remove raw_local_irq_save()/restore() from arch_cpu_idle() s390/idle: merge enabled_wait() and arch_cpu_idle() s390/delay: remove udelay_simple() s390/irq: select HAVE_IRQ_EXIT_ON_IRQ_STACK s390/delay: simplify udelay s390/test_unwind: use timer instead of udelay s390/test_unwind: fix CALL_ON_STACK tests s390: make calls to TRACE_IRQS_OFF/TRACE_IRQS_ON balanced s390: always clear kernel stack backchain before calling functions
2020-12-16Merge tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds2-0/+30
Pull VFIO updates from Alex Williamson: - Fix uninitialized list walk in error path (Eric Auger) - Use io_remap_pfn_range() (Jason Gunthorpe) - Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy) - Enable mdev request interrupt with CCW support (Eric Farman) - Enable interface to iommu_domain from vfio_group (Lu Baolu) * tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio: vfio/type1: Add vfio_group_iommu_domain() vfio-ccw: Wire in the request callback vfio-mdev: Wire in a request handler for mdev parent vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU vfio-pci: Use io_remap_pfn_range() for PCI IO memory vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
2020-12-16Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-blockLinus Torvalds5-11/+168
Pull block driver updates from Jens Axboe: "Nothing major in here: - NVMe pull request from Christoph: - nvmet passthrough improvements (Chaitanya Kulkarni) - fcloop error injection support (James Smart) - read-only support for zoned namespaces without Zone Append (Javier González) - improve some error message (Minwoo Im) - reject I/O to offline fabrics namespaces (Victor Gladkov) - PCI queue allocation cleanups (Niklas Schnelle) - remove an unused allocation in nvmet (Amit Engel) - a Kconfig spelling fix (Colin Ian King) - nvme_req_qid simplication (Baolin Wang) - MD pull request from Song: - Fix race condition in md_ioctl() (Dae R. Jeong) - Initialize read_slot properly for raid10 (Kevin Vigor) - Code cleanup (Pankaj Gupta) - md-cluster resync/reshape fix (Zhao Heming) - Move null_blk into its own directory (Damien Le Moal) - null_blk zone and discard improvements (Damien Le Moal) - bcache race fix (Dongsheng Yang) - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang, Lutz Pogrell, Md Haris Iqbal) - lightnvm NULL pointer deref fix (tangzhenhao) - sr in_interrupt() removal (Sebastian Andrzej Siewior) - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included as it made it easier for them to funnel the feature through the block driver tree. - Follow up fixes (Colin Ian King)" * tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits) block: drop dead assignments in loop_init() sr: Remove in_interrupt() usage in sr_init_command(). sr: Switch the sector size back to 2048 if sr_read_sector() changed it. cdrom: Reset sector_size back it is not 2048. drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c null_blk: Move driver into its own directory null_blk: Allow controlling max_hw_sectors limit null_blk: discard zones on reset null_blk: cleanup discard handling null_blk: Improve implicit zone close null_blk: improve zone locking block: Align max_hw_sectors to logical blocksize null_blk: Fail zone append to conventional zones null_blk: Fix zone size initialization bcache: fix race between setting bdev state to none and new write request direct to backing block/rnbd: fix a null pointer dereference on dev->blk_symlink_name block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name block/rnbd: call kobject_put in the failure path Documentation/ABI/rnbd-srv: add document for force_close block/rnbd-srv: close a mapped device from server side. ...
2020-12-16s390/delay: remove udelay_simple()Heiko Carstens1-1/+1
udelay_simple() callers can make use of the now simplified udelay() implementation. No need to keep it. Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-15Merge tag 'net-next-5.11' of ↵Linus Torvalds1-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-09s390/cio: fix use-after-free in ccw_device_destroy_consoleQinglang Miao1-2/+2
Use of sch->dev reference after the put_device() call could trigger the use-after-free bugs. Fix this by simply adjusting the position of put_device. Fixes: 37db8985b211 ("s390/cio: add basic protected virtualization support") Reported-by: Hulk Robot <hulkci@huawei.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> [vneethv@linux.ibm.com: Slight modification in the commit-message] Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-07s390/ccwgroup: use bus->dev_groups for bus-based sysfs attributesJulian Wiedmann1-9/+3
Bus drivers have their own way of describing the sysfs attributes that all devices on a bus should provide. Switch ccwgroup_attr_groups over to use bus->dev_groups, and thus free up dev->groups for usage by the ccwgroup device drivers. While adjusting the attribute naming, use ATTRIBUTE_GROUPS() to get rid of some boilerplate code. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-03vfio-ccw: Wire in the request callbackEric Farman2-0/+30
The device is being unplugged, so pass the request to userspace to ask for a graceful cleanup. This should free up the thread that would otherwise loop waiting for the device to be fully released. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-12-02s390/cio: remove pm support from ccw bus driverVineeth Vijayan5-258/+2
As part of removing broken pm-support from s390 arch, remove the pm callbacks from ccw-bus driver.The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from css-bus driverVineeth Vijayan2-139/+1
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove the unused pm callbacks from css-bus driver. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from IO subchannel driversVineeth Vijayan1-14/+0
The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Remove these unused pm callbacks from io-subchannel drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from chsc subchannel driverVineeth Vijayan1-29/+0
As part of removing the broken pm-support from s390 arch, remove the pm-calls from chsc subchannel driver. The power-management functions are unused since the 'commit 394216275c7d ("s390: remove broken hibernate / power management support")'. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-12-02s390/cio: remove pm support from eadm-sch driversVineeth Vijayan1-13/+0
The 'commit 394216275c7d ("s390: remove broken hibernate / power management support")' removes the pm-support. Remove the unused functions in eadm-sch drivers. Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-11-16s390/cio: Add support for FCES status notificationVineeth Vijayan3-10/+68
Fibre Channel Endpoint-Security event is received as an sei:nt0 type in the CIO layer. This information needs to be shared with the CCW device drivers using the path_events callback. Co-developed-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16s390/cio: Provide Endpoint-Security Mode per CUVineeth Vijayan1-0/+83
Add an interface in the CIO layer to retrieve the information about the Endpoint-Security Mode (ESM) of the specified CU. The ESM values are defined as 0-None, 1-Authenticated or 2, 3-Encrypted. [vneethv@linux.ibm.com: cleaned-up and modified description] Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16s390/cio: Export information about Endpoint-Security CapabilitySebastian Ott2-1/+17
Add a new sysfs attribute 'esc' per chpid. This new attribute exports the Endpoint-Security-Capability byte of channel-path description block, which could be 0-None, 1-Authentication, 2 and 3-Encryption. For example: $ cat /sys/devices/css0/chp0.34/esc 0 [vneethv@linux.ibm.com: cleaned-up & modified description] Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-16Merge tag 's390-5.10-1' of ↵Linus Torvalds5-59/+58
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Remove address space overrides using set_fs() - Convert to generic vDSO - Convert to generic page table dumper - Add ARCH_HAS_DEBUG_WX support - Add leap seconds handling support - Add NVMe firmware-assisted kernel dump support - Extend NVMe boot support with memory clearing control and addition of kernel parameters - AP bus and zcrypt api code rework. Add adapter configure/deconfigure interface. Extend debug features. Add failure injection support - Add ECC secure private keys support - Add KASan support for running protected virtualization host with 4-level paging - Utilize destroy page ultravisor call to speed up secure guests shutdown - Implement ioremap_wc() and ioremap_prot() with MIO in PCI code - Various checksum improvements - Other small various fixes and improvements all over the code * tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits) s390/uaccess: fix indentation s390/uaccess: add default cases for __put_user_fn()/__get_user_fn() s390/zcrypt: fix wrong format specifications s390/kprobes: move insn_page to text segment s390/sie: fix typo in SIGP code description s390/lib: fix kernel doc for memcmp() s390/zcrypt: Introduce Failure Injection feature s390/zcrypt: move ap_msg param one level up the call chain s390/ap/zcrypt: revisit ap and zcrypt error handling s390/ap: Support AP card SCLP config and deconfig operations s390/sclp: Add support for SCLP AP adapter config/deconfig s390/ap: add card/queue deconfig state s390/ap: add error response code field for ap queue devices s390/ap: split ap queue state machine state from device state s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG s390/zcrypt: introduce msg tracking in zcrypt functions s390/startup: correct early pgm check info formatting s390: remove orphaned extern variables declarations s390/kasan: make sure int handler always run with DAT on s390/ipl: add support to control memory clearing for nvme re-IPL ...
2020-09-30s390: remove orphaned function declarationsVasily Gorbik1-1/+0
arch/s390/pci/pci_bus.h: zpci_bus_init - only declaration left after commit 05bc1be6db4b ("s390/pci: create zPCI bus") arch/s390/include/asm/gmap.h: gmap_pte_notify - only declaration left after commit 4be130a08420 ("s390/mm: add shadow gmap support") arch/s390/include/asm/pgalloc.h: rcu_table_freelist_finish - only declaration left after commit 36409f6353fc ("[S390] use generic RCU page-table freeing code") arch/s390/include/asm/tlbflush.h: smp_ptlb_all - only declaration left after commit 5a79859ae0f3 ("s390: remove 31 bit support") arch/s390/include/asm/vtimer.h: init_cpu_vtimer - only declaration left after commit b5f87f15e200 ("s390/idle: consolidate idle functions and definitions") arch/s390/include/asm/pci.h: zpci_debug_info - only declaration left after commit 386aa051fb4b ("s390/pci: remove per device debug attribute") arch/s390/include/asm/vdso.h: vdso_alloc_boot_cpu - only declaration left after commit 4bff8cb54502 ("s390: convert to GENERIC_VDSO") arch/s390/include/asm/smp.h: smp_vcpu_scheduled - only declaration left after commit 67626fadd269 ("s390: enforce CONFIG_SMP") arch/s390/kernel/entry.h: restart_call_handler - only declaration left after commit 8b646bd75908 ("[S390] rework smp code") arch/s390/kernel/entry.h: startup_init_nobss - only declaration left after commit 2e83e0eb85ca ("s390: clean .bss before running uncompressed kernel") arch/s390/kernel/entry.h: s390_early_resume - only declaration left after commit 394216275c7d ("s390: remove broken hibernate / power management support") drivers/s390/char/raw3270.h: raw3270_request_alloc_bootmem - only declaration left after commit 33403dcfcdfd ("[S390] 3270 console: convert from bootmem to slab") drivers/s390/cio/device.h: ccw_device_schedule_sch_unregister - only declaration left after commit 37de53bb5290 ("[S390] cio: introduce ccw device todos") drivers/s390/char/tape.h: tape_hotplug_event - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_oper_handler - has only declaration since recorded git history. drivers/s390/char/tape.h: tape_noper_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_check_locate - only declaration left after commit 161beff8f40d ("s390/tape: remove tape block leftovers") drivers/s390/char/tape_std.h: tape_std_default_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_unexpect_uchk_handler - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_irq - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_has_failed - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_succeded - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_do_retry - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_read_opposite - has only declaration since recorded git history. drivers/s390/char/tape_std.h: tape_std_error_recovery_HWBUG - has only declaration since recorded git history. Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-30s390/cio: remove unused channel_subsystem_reinitVasily Gorbik1-14/+0
Added with commit 77e844b96440 ("s390/hibernate: add early resume function") unused since commit 394216275c7d ("s390: remove broken hibernate / power management support"). Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-26s390/stp: add support for leap secondsSven Schnelle1-0/+21
In the current implementation, leap seconds are only synchronized during the bootup process when the STP clock is synced. If the Leap second offset (LSO) changes the machine must be rebooted, which is not desired. This patch adds the required code to handle Leap second changes during runtime. If the Leap second changes, a Configuration change machine check is triggered. The STP code than schedules a Leap second insertion/deletion with do_adjtimex(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-15s390/cio: Helper functions to read CSSID, IID, and CHIDAlexandra Winter5-9/+104
Add helper functions to expose Channel Subsystem ID (CSSID), MIF Image Id (IID), Channel ID (CHID) and Channel Path ID (CHPID). These values are required by the qeth driver's exploitation of network- address-change-notifications to determine which entries belong to this interface. Store the Partition identifier in System log, as this may be used to map a Linux view to a Hardware view for debugging purpose. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15s390/cio: Add new Operation Code OC3 to PNSOAlexandra Winter3-13/+12
Add support for operation code 3 (OC3) of the Perform-Network-Subchannel-Operations (PNSO) function of the Channel-Subsystem-Call (CHSC) instruction. PNSO provides 2 operation codes: OC0 - BRIDGE_INFO OC3 - ADDR_INFO (new) Extend the function calls to *pnso* to pass the OC and add new response code 0108. Support for OC3 is indicated by a flag in the css_general_characteristics. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14s390/qdio: always use dev_name() for device name in QIBJulian Wiedmann2-2/+4
Passing a custom name from the device driver is nice - but in practice it's only zfcp who has been using this. So we might as well hard-code a naming scheme in the qdio layer, so that qeth also benefits from it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/qdio: clean up QDR setupJulian Wiedmann1-20/+13
__qdio_allocate_fill_qdr() is meant to set up one specific queue descriptor in the QDR. But for this simple task, it gets passed a bunch of global structs and offsets - and then navigates through the structs to find its actual operands. Clean up all the complicated pointer chasing & index calculation, and just pass a descriptor and its associated queue struct. While at it also add some virt_to_phys() translations, to clarify that addresses in the QDR are meant to be absolute. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-09-14s390/qdio: make qdio_handle_aobs() more robustJulian Wiedmann1-22/+20
When processing a PENDING buffer with no attached aob, the current code would get stuck on this buffer (as the 'continue' causes us to not advance the buffer index) and process it repeatedly until the loop terminates eventually. Luckily this should never happen - the HW must not use the PENDING state when no aob was provided. But we can still make this code path less fragile and protect against buggy devices. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-08-17s390/cio: add cond_resched() in the slow_eval_known_fn() loopVineeth Vijayan1-0/+5
The scanning through subchannels during the time of an event could take significant amount of time in case of platforms with lots of known subchannels. This might result in higher scheduling latencies for other tasks especially on systems with a single CPU. Add cond_resched() call, as the loop in slow_eval_known_fn() can be executed for a longer duration. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-03Merge tag 's390-5.9-1' of ↵Linus Torvalds3-46/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add support for function error injection. - Add support for custom exception handlers, as required by BPF_PROBE_MEM. - Add support for BPF_PROBE_MEM. - Add trace events for idle enter / exit for the s390 specific idle implementation. - Remove unused zcore memmmap device. - Remove unused "raw view" from s390 debug feature. - AP bus + zcrypt device driver code refactoring. - Provide cex4 cca sysfs attributes for cex3 for zcrypt device driver. - Expose only minimal interface to walk physmem for mm/memblock. This is a common code change and it has been agreed on with Mike Rapoport and Andrew Morton that this can go upstream via the s390 tree. - Rework of the s390 vmem/vmmemap code to allow for future memory hot remove. - Get rid of FORCE_MAX_ZONEORDER to finally allow for order-10 allocations again, instead of only order-8 allocations. - Various small improvements and fixes. * tag 's390-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits) s390/vmemmap: coding style updates s390/vmemmap: avoid memset(PAGE_UNUSED) when adding consecutive sections s390/vmemmap: remember unused sub-pmd ranges s390/vmemmap: fallback to PTEs if mapping large PMD fails s390/vmem: cleanup empty page tables s390/vmemmap: take the vmem_mutex when populating/freeing s390/vmemmap: cleanup when vmemmap_populate() fails s390/vmemmap: extend modify_pagetable() to handle vmemmap s390/vmem: consolidate vmem_add_range() and vmem_remove_range() s390/vmem: rename vmem_add_mem() to vmem_add_range() s390: enable HAVE_FUNCTION_ERROR_INJECTION s390/pci: clarify comment in s390_mmio_read/write s390/time: improve comparison for tod steering s390/time: select CLOCKSOURCE_VALIDATE_LAST_CYCLE s390/time: use CLOCKSOURCE_MASK s390/bpf: implement BPF_PROBE_MEM s390/kernel: expand exception table logic to allow new handling options s390/kernel: unify EX_TABLE* implementations s390/mm: allow order 10 allocations s390/mm: avoid trimming to MAX_ORDER ...
2020-07-20s390/qdio: remove internal polling in non-thinint pathJulian Wiedmann2-27/+2
For non-thinint devices in LPAR, qdio polls an idle Input Queue for a little while to catch more work. But platform support for thinints has been around practically _forever_ by now, so this micro-optimization is seeing 0 actual use. Remove it to reduce the overall complexity of the hot path. In the meantime we also grew support for driver-level polling (eg. NAPI in qeth), so it's quite questionable how useful this would actually be on current kernels. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: allow to scan all 128 Input SBALsJulian Wiedmann1-5/+1
The comment is inaccurate, qdio_inbound_q_moved() and/or its callers no longer get confused by a count of 128 completed SBALs. Scanning all 128 SBALs at once can improve IRQ reduction (as we now place the ACK at the right spot), and reduce the amount of processing needed to handle all completed SBALs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-20s390/qdio: fix statistics for 128 SBALsJulian Wiedmann3-14/+3
Old code would only scan up to 127 SBALs at once. So the last statistics bucket was set aside to count "discovered 127 SBALs with new work" events. But nowadays we allow to scan all 128 SBALs for Output Queues, and a subsequent patch will introduce the same for Input Queues. So fix up the accounting to use the last bucket only when all 128 SBALs have been discovered with new work. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-03vfio-ccw: Fix a build error due to missing include of linux/slab.hSean Christopherson1-0/+1
Include linux/slab.h to fix a build error due to kfree() being undefined. Fixes: 3f02cb2fd9d2 ("vfio-ccw: Wire up the CRW irq and CRW region") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703022628.6036-1-sean.j.christopherson@intel.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-17s390/qdio: warn about unexpected SLSB statesJulian Wiedmann1-5/+11
The way we produce SBALs to the device (first update q->nr_buf_used, then update the SLSB) should ensure that we never see some of the SLSB states when scanning the queue for progress. So make some noise if we do, this implies a bug in our SBAL tracking. Also tweak the WARN msg to provide more information. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17s390/qdio: clean up usage of qdio_dataJulian Wiedmann1-10/+7
This removes the last remaining accesses to ->qdio_data from internal code. Just pass the qdio_irq struct where needed instead. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/qdio: reduce SLSB writes during Input Queue processingJulian Wiedmann3-50/+20
Streamline the processing of QDIO Input Queues, and remove some intermittent SLSB updates (no deleting of old ACKs, no redundant transitions through NOT_INIT). Rather than counting ACKs, we now keep track of the whole batch of SBALs that were completed during the current polling cycle. Most completed SBALs stay in their initial state (ie. PRIMED or ERROR), except that the most recent SBAL in each sub-run is ACKed for IRQ reduction. The only logic changes happen in inbound_handle_work(), the other delta is just a renaming of the variables that track the SBAL batch. Note that in particular we don't need to flip the _oldest_ SBAL to an idle state (eg. NOT_INIT or ACKed) as a guard against catching our own tail. Since get_inbound_buffer_frontier() will never scan more than the remaining nr_buf_used SBALs, this scenario just doesn't occur. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/qdio: fine-tune SLSB updateJulian Wiedmann1-1/+8
xchg() for a single-byte location assembles to a 4-byte Compare&Swap, wrapped into a non-trivial amount of retry code that deals with concurrent modifications to the unaffected bytes. Change it to a simple byte-store, but preserve the memory ordering semantics that the CS provided. This simplifies the generated code for a hot path, and in theory also allows us to amortize the memory barriers over multiple SLSB updates. CC: Andreas Krebbel <krebbel@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-04vfio-ccw: make vfio_ccw_regops variables declarations staticVasily Gorbik1-2/+2
Fixes the following sparse warnings: drivers/s390/cio/vfio_ccw_chp.c:62:30: warning: symbol 'vfio_ccw_schib_region_ops' was not declared. Should it be static? drivers/s390/cio/vfio_ccw_chp.c:117:30: warning: symbol 'vfio_ccw_crw_region_ops' was not declared. Should it be static? Link: https://lkml.kernel.org/r/patch.git-a34be7aede18.your-ad-here.call-01591269421-ext-5655@work.hours Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-03vfio-ccw: Add trace for CRW eventEric Farman3-0/+32
Since CRW events are (should be) rare, let's put a trace in that routine too. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-9-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-03vfio-ccw: Wire up the CRW irq and CRW regionFarhan Ali3-0/+74
Use the IRQ to notify userspace that there is a CRW pending in the region, related to path-availability changes on the passthrough subchannel. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-8-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-03vfio-ccw: Introduce a new CRW regionFarhan Ali4-0/+87
This region provides a mechanism to pass a Channel Report Word that affect vfio-ccw devices, and needs to be passed to the guest for its awareness and/or processing. The base driver (see crw_collect_info()) provides space for two CRWs, as a subchannel event may have two CRWs chained together (one for the ssid, one for the subchannel). As vfio-ccw will deal with everything at the subchannel level, provide space for a single CRW to be transferred in one shot. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-7-farman@linux.ibm.com> [CH: added padding to ccw_crw_region] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Refactor IRQ handlersEric Farman1-6/+17
To simplify future expansion. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-6-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Introduce a new schib regionFarhan Ali5-3/+112
The schib region can be used by userspace to get the subchannel- information block (SCHIB) for the passthrough subchannel. This can be useful to get information such as channel path information via the SCHIB.PMCW fields. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-5-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Refactor the unregister of the async regionsEric Farman2-8/+13
This is mostly for the purposes of a later patch, since we'll need to do the same thing later. While we are at it, move the resulting function call to ahead of the unregistering of the IOMMU notifier, so that it's done in the reverse order of how it was created. Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-4-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Register a chp_event callback for vfio-ccwFarhan Ali1-0/+47
Register the chp_event callback to receive channel path related events for the subchannels managed by vfio-ccw. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-3-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Introduce new helper functions to free/destroy regionsFarhan Ali1-10/+18
Consolidate some of the cleanup code for the regions, so that as more are added we reduce code duplication. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200505122745.53208-2-farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-06-02vfio-ccw: Enable transparent CCW IPL from DASDJared Rossi1-7/+12
Remove the explicit prefetch check when using vfio-ccw devices. This check does not trigger in practice as all Linux channel programs are intended to use prefetch. It is expected that all ORBs issued by Linux will request prefetch. Although non-prefetching ORBs are not rejected, they will prefetch nonetheless. A warning is issued up to once per 5 seconds when a forced prefetch occurs. A non-prefetch ORB does not necessarily result in an error, however frequent encounters with non-prefetch ORBs indicate that channel programs are being executed in a way that is inconsistent with what the guest is requesting. While there is currently no known case of an error caused by forced prefetch, it is possible in theory that forced prefetch could result in an error if applied to a channel program that is dependent on non-prefetch. Signed-off-by: Jared Rossi <jrossi@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Message-Id: <20200506212440.31323-2-jrossi@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-05-28s390/cio, s390/qeth: cleanup PNSO CHSCAlexandra Winter4-154/+47
CHSC3D (PNSO - perform network subchannel operation) is used for OC0 (Store-network-bridging-information) as well as for OC3 (Store-network-address-information). So common fields are renamed from *brinfo* to *pnso*. Also *_bridge_host_* is changed into *_addr_change_*, e.g. qeth_bridge_host_event to qeth_addr_change_event, for the same reasons. The keywords in the card traces are changed accordingly. Remove unused L3 types, as PNSO will only return Layer2 entries. Make PNSO CHSC implementation more consistent with existing API usage: Add new function ccw_device_pnso() to drivers/s390/cio/device_ops.c and the function declaration to arch/s390/include/asm/ccwdev.h, which takes a struct ccw_device * as parameter instead of schid and calls chsc_pnso(). PNSO CHSC has no strict relationship to qdio. So move the calling function from qdio to qeth_l2 and move the necessary structures to a new file arch/s390/include/asm/chsc.h. Do response code evaluation only in chsc_error_from_response() and use return code in all other places. qeth_anset_makerc() was meant to evaluate the PNSO response code, but never did, because pnso_rc was already non-zero. Indentation was corrected in some places. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-28s390/qdio: remove q->first_to_kickJulian Wiedmann2-14/+7
q->first_to_kick is obsolete, and can be replaced by q->first_to_check. Both cursors start off at 0. Out of the three code paths that update first_to_check, the qdio_inspect_queue() path is irrelevant as it doesn't even touch first_to_kick anymore. This leaves us with the two tasklet-driven code paths. Here any update to first_to_check is followed by a call to qdio_kick_handler(), which advances first_to_kick by the same amount. So the two cursors will differ only for a tiny moment. Drivers have no way of deterministically observing this difference, and thus it doesn't matter which of the cursors we use for reporting an error to q->handler. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-28s390/qdio: fix up qdio_start_irq() kerneldocJulian Wiedmann1-1/+1
Document the actual semantics, correcting an old copy & paste mistake. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20s390/qdio: add IRQ reduction for error SBALsJulian Wiedmann1-12/+11
SBALs in PRIMED or ERROR state represent new work on the Input Queue. But while inbound_primed() does all sorts of ACK management for new PRIMED work, the same handling is currently missing for ERROR work. In particular the path for ERROR work doesn't clear up _old_ ACKs. Treat ERROR work the same as PRIMED work, but consider that the QEBSM auto-ACK feature doesn't apply here. So we need to set the ACK manually, as if it was a non-QEBSM device. Note that this doesn't aspire to actually improve performance, the main goal is to just unify the code paths and have consistent behaviour. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20s390/qdio: refactor ACK processing for primed SBALsJulian Wiedmann1-8/+7
inbound_primed() currently has two code paths - one for QEBSM that knows how to deal with multiple ACKs, and a non-QEBSM path that strictly assumes a single ACK on the queue. In preparation for a subsequent patch, slightly adjust the non-QEBSM path so that it can manage a queue with multiple ACKs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 14:15:36 +0000