summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18rtc: cmos: fix build on non-ACPI platformsAlexandre Belloni1-0/+3
Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need to be defined on non-ACPI platforms. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221018203512.2532407-1-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-18rtc: cmos: Fix wake alarm breakageRafael J. Wysocki1-3/+8
Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue") overlooked the fact that cmos_do_probe() depended on the preparations carried out by cmos_wake_setup() and the wake alarm stopped working after the ordering of them had been changed. Address this by partially reverting commit 4919d3eb2ec0 so that cmos_wake_setup() is called before cmos_do_probe() again and moving the rtc_wake_setup() invocation from cmos_wake_setup() directly to the callers of cmos_do_probe() where it will happen after a successful completion of the latter. Fixes: 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue") Reported-by: Zhang Rui <rui.zhang@intel.com> Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/5887691.lOV4Wx5bFT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-14Merge tag 'rtc-6.1' of ↵Linus Torvalds11-247/+98
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A great rework of the isl12022 driver makes up the bulk of the changes. There is also an important fix for CMOS and then the usual small fixes: - switch to devm_clk_get_enabled() where relevant - cmos: event handler registration fix - isl12022: code improvements" * tag 'rtc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: rv3028: Fix codestyle errors rtc: cmos: Fix event handler registration ordering issue rtc: k3: Use devm_clk_get_enabled() helper rtc: jz4740: Use devm_clk_get_enabled() helper rtc: mpfs: Use devm_clk_get_enabled() helper rtc: ds1685: Fix spelling of function name in comment block rtc: isl12022: switch to using regmap API rtc: isl12022: drop redundant write to HR register rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata() rtc: isl12022: use %ptR rtc: isl12022: simplify some expressions rtc: isl12022: drop a dev_info() rtc: isl12022: specify range_min and range_max rtc: isl12022: stop using deprecated devm_rtc_device_register() rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register() rtc: mxc: Use devm_clk_get_enabled() helper rtc: gamecube: Always reset HW_SRNPROT after read rtc: k3: detect SoC to determine erratum fix rtc: k3: wait until the unlock field is not zero rtc: mpfs: Remove printing of stray CR
2022-10-13rtc: rv3028: Fix codestyle errorsKe Sun1-3/+2
Compiler warnings： drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_set': drivers/rtc/rtc-rv3028.c:559:20: warning: statement will never be executed [-Wswitch-unreachable] 559 | u8 mode; | ^~~~ drivers/rtc/rtc-rv3028.c: In function 'rv3028_param_get': drivers/rtc/rtc-rv3028.c:526:21: warning: statement will never be executed [-Wswitch-unreachable] 526 | u32 value; | ^~~~~ Fix it by moving the variable declaration to the beginning of the function. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-rtc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Ke Sun <sunke@kylinos.cn> Link: https://lore.kernel.org/r/20221008071321.1799971-1-sunke@kylinos.cn Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: cmos: Fix event handler registration ordering issueRafael J. Wysocki1-10/+19
Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit. Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver") Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsingularity.net/ Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: k3: Use devm_clk_get_enabled() helperChristophe JAILLET1-18/+4
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 12843 4804 64 17711 452f drivers/rtc/rtc-ti-k3.o down to: 12523 4804 64 17391 43ef drivers/rtc/rtc-ti-k3.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/601288834ab71c0fddde7eedd8cdb8001254ed7e.1661329498.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: jz4740: Use devm_clk_get_enabled() helperChristophe JAILLET1-22/+3
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). As a side effect, some error messages are not logged anymore, so also use dev_err_probe() instead of dev_err() in case of error. At least the error code will be logged (and -EPROBE_DEFER will be filtered) Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 9025 2488 128 11641 2d79 drivers/rtc/rtc-jz4740.o down to: 8267 2080 128 10475 28eb drivers/rtc/rtc-jz4740.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/af10570000d7e103d70bbea590ce8df4f8902b67.1661330532.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: mpfs: Use devm_clk_get_enabled() helperChristophe JAILLET1-18/+1
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). That said, mpfs_rtc_init_clk() is the same as devm_clk_get_enabled(), so use this function directly instead. This also fixes an (unlikely) unchecked devm_add_action_or_reset() error. Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 5330 2208 0 7538 1d72 drivers/rtc/rtc-mpfs.o down to: 5074 2208 0 7282 1c72 drivers/rtc/rtc-mpfs.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/e55c959f2821a2c367a4c5de529a638b1cc6b8cd.1661329086.git.christophe.jaillet@wanadoo.fr Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: ds1685: Fix spelling of function name in comment blockColin Ian King1-1/+1
The function name is missing the letter 'd' in the comment block. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20221003153711.271630-1-colin.i.king@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: switch to using regmap APIRasmus Villemoes2-85/+26
The regmap abstraction allows us to avoid the private i2c transfer helpers, and also offers some nice utility functions such as the regmap_update_bits family. While at it, simplify the code even more by not keeping track of ->write_enabled: rtc_set_time is not a hot path, so one extra i2c read doesn't hurt (regmap_update_bits elides the write when the bits are already as desired). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-9-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: drop redundant write to HR registerRasmus Villemoes1-14/+0
There's nothing in the data sheet that says writing to one of the time keeping registers is necessary to start the RTC. It does so at the stop condition of the i2c transfer setting the WRTC bit: Upon initialization or power-up, the WRTC must be set to "1" to enable the RTC. Upon the completion of a valid write (STOP), the RTC starts counting. Moreover, even if such a write to one of the timekeeping registers was necessary, that's exactly what we do anyway just below when we actually write the given struct rtc_time to the device. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-8-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: use dev_set_drvdata() instead of i2c_set_clientdata()Rasmus Villemoes1-3/+2
As another preparation for removing direct references to the i2c_client in the helper functions, stash a pointer to the private data via dev_set_drvdata() instead of i2c_set_clientdata(). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-7-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: use %ptRRasmus Villemoes1-10/+2
Simplify the code and make the output format consistent with other RTC drivers by standardizing on using the %ptR printf extension. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-6-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: simplify some expressionsRasmus Villemoes1-4/+4
These instances of '&client->dev' might as well be spelled 'dev', since 'client' has been computed from 'dev' via 'client = to_i2c_client(dev)'. Later patches will get rid of that local variable 'client', so remove these unnecessary references so those later patches become easier to read. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-5-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: drop a dev_info()Rasmus Villemoes1-3/+0
This dev_info() seems to be a debug leftover, and it would only get printed once (or, once per battery change). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-4-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: specify range_min and range_maxRasmus Villemoes1-0/+2
The isl12022 can (only) keep track of times in the range 2000-2099. The data sheet says The calendar registers track date, month, year, and day of the week and are accurate through 2099, with automatic leap year correction. The lower bound of 2000 is obtained by simply observing that its YR register only counts from 00 through 99. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-3-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: isl12022: stop using deprecated devm_rtc_device_register()Rasmus Villemoes1-4/+7
The comments say that devm_rtc_device_register() is deprecated and that one should instead use devm_rtc_allocate_device() and [devm_]rtc_register_device. So do that. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220921114624.3250848-2-linux@rasmusvillemoes.dk Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-10-13rtc: stmp3xxx: Add failure handling for stmp3xxx_wdt_register()Lin Yujun1-0/+2
Use platform_device_put() to free platform device before print error message when platform_device_add() fails to run. Fixes: 1a71fb84fda6 ("rtc: stmp3xxx: add wdt-accessor function") Signed-off-by: Lin Yujun <linyujun809@huawei.com> Reviewed-by: Wolfram Sang <wsa@kernel.org> Link: https://lore.kernel.org/r/20220915065253.43668-1-linyujun809@huawei.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2022-08-23rtc: mxc: Use devm_clk_get_enabled() helperChristophe JAILLET1-25/+2
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code, the error handling paths and avoid the need of a dedicated function used with devm_add_action_or_reset(). Based on my test with allyesconfig, this reduces the .o size from: text data bss dec hex filename 6705 1968 0 8673 21e1 drivers/rtc/rtc-mxc.o down to: 6212 1968 0 8180 1ff4 drivers/rtc/rtc-mxc.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1b5ad1877304b01ddbba73ca615274a52f781aa2.1660582728.git.christophe.jaillet@wanadoo.fr
2022-08-23rtc: gamecube: Always reset HW_SRNPROT after readEmmanuel Gil Peyrot1-6/+5
This register would fail to be reset if reading the RTC bias failed for whichever reason. This commit reorganises the code around to unconditionally write it back to its previous value, unmap it, and return the result of regmap_read(), which makes it both simpler and more correct in the error case. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220823130702.1046-1-linkmauve@linkmauve.fr
2022-08-23rtc: k3: detect SoC to determine erratum fixBryan Brattlof1-18/+14
To allow new SoCs to use this device without a new compatible string, use a soc_device_attribute list to define all SoCs affected by the TI i2327 erratum and require help from their bootloaders to unlock this device. Signed-off-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220816173312.23243-2-bb@ti.com
2022-08-23rtc: k3: wait until the unlock field is not zeroBryan Brattlof1-1/+1
After writing the magic words to the KICK0 and KICK1 registers, we must wait for a 1 in the unlock field of the general control register to signify when the rtc device is in an unlocked state. Signed-off-by: Bryan Brattlof <bb@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220816173312.23243-1-bb@ti.com
2022-08-23rtc: mpfs: Remove printing of stray CRGeert Uytterhoeven1-4/+3
During boot, the driver prints out a stray carriage return character. Remove it, together with the preceding space character. While at it, change prescaler to "unsigned long", as returned by clk_get_rate(), to avoid truncating very large clock rates, and update the format specifiers. Fixes: 0b31d703598dc199 ("rtc: Add driver for Microchip PolarFire SoC") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/bce2ca405ef96b1363fd1370887409d9e8468422.1660659437.git.geert+renesas@glider.be
2022-08-16i2c: Make remove callback return voidUwe Kleine-König6-15/+6
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-09rtc: spear: set range maxZeng Jingxiang1-1/+1
In the commit f395e1d3b28d7c2c67b73bd467c4fb79523e1c65 ("rtc: spear: set range"), the value of RTC_TIMESTAMP_END_9999 was incorrectly set to range_min. 390 config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000; 391 config->rtc->range_max = RTC_TIMESTAMP_END_9999; Fixes: f395e1d3b28d ("rtc: spear: set range") Signed-off-by: Zeng Jingxiang <linuszeng@tencent.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220728100101.1906801-1-zengjx95@gmail.com
2022-08-08rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0Rafael J. Wysocki1-3/+0
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to use low-power S0 idle on the given platform than S3 (provided that the latter is supported) and it doesn't preclude using either of them (which of them will be used depends on the choices made by user space). For this reason, there is no benefit from checking that flag in use_acpi_alarm_quirks(). First off, it cannot be a bug to do S3 with use_acpi_alarm set, because S3 can be used on systems with ACPI_FADT_LOW_POWER_S0 and it must work if really supported, so the ACPI_FADT_LOW_POWER_S0 check is not needed to protect the S3-capable systems from failing. Second, suspend-to-idle can be carried out on a system with ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting use_acpi_alarm is needed to handle that case correctly, it should be set regardless of the ACPI_FADT_LOW_POWER_S0 value. Accordingly, drop the ACPI_FADT_LOW_POWER_S0 check from use_acpi_alarm_quirks(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/12054246.O9o76ZdvQC@kreacher
2022-08-08rtc: zynqmp: initialize fract_tickAlexandre Belloni1-1/+1
fract_tick is used uninitialized when fract_offset is 0 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20220727100018.3301470-1-alexandre.belloni@bootlin.com
2022-07-26rtc: Add NCT3018Y real time clock driverMia Lin3-0/+564
Add real time clock support for NCT3018Y. Signed-off-by: Mia Lin <mimi05633@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220713090647.8028-4-mimi05633@gmail.com
2022-07-26rtc: rx8025: fix 12/24 hour mode detection on RX-8035Mathew McBride1-4/+18
The 12/24hr flag in the RX-8035 can be found in the hour register, instead of the CTRL1 on the RX-8025. This was overlooked when support for the RX-8035 was added, and was causing read errors when the hour register 'overflowed'. To deal with the relevant register not always being visible in the relevant functions, determine the 12/24 mode at startup and store it in the driver state. Signed-off-by: Mathew McBride <matt@traverse.com.au> Fixes: f120e2e33ac8 ("rtc: rx8025: implement RX-8035 support") Cc: stable@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220706074236.24011-1-matt@traverse.com.au
2022-07-26rtc: cros-ec: Only warn once in .remove() about notifier_chain problemsUwe Kleine-König1-3/+1
When a remove platform device callback returns an error code, the driver core emits an error message ("remove callback returned a non-zero value. This will be ignored.\n") and still removes the device. As the driver already emits a more specific error message, return 0 to suppress the core's error message. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220707153156.214841-1-u.kleine-koenig@pengutronix.de
2022-07-26rtc: vr41xx: remove driverThomas Bogendoerfer3-374/+0
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220715135330.134684-1-tsbogend@alpha.franken.de
2022-07-26rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()Tom Rix1-3/+0
cppcheck reports [drivers/rtc/rtc-mpfs.c:219]: (style) Variable 'pending' is assigned a value that is never used. The fetched CONTROL_REG stored in pending is unused and partially duplicates the functionality of the later call to mpfs_rtc_clear(). This looks like leftover development code, so remove pending. Fixes: 0b31d703598d ("rtc: Add driver for Microchip PolarFire SoC") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220627205943.2075043-1-trix@redhat.com
2022-07-26rtc: rv8803: fix missing unlock on error in rv8803_set_time()Yang Yingliang1-1/+3
Add the missing unlock before return from function rv8803_set_time() in the error handling case. Fixes: f8176e0bb83f ("rtc: rv8803: initialize registers on post-probe voltage loss") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220627080822.3881072-1-yangyingliang@huawei.com
2022-07-26rtc: zynqmp: Add calibration set and get supportSrinivas Neeli1-19/+94
Zynqmp RTC controller has a calibration feature to compensate time deviation due to input clock inaccuracy. Set and get calibration API's are used for setting and getting calibration value from the controller calibration register. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220626070817.3780977-3-srinivas.neeli@xilinx.com
2022-07-26rtc: zynqmp: Updated calibration valueSrinivas Neeli1-1/+1
As per RTC spec default calibration value is 0x7FFF. We are in process to update the 0x7FFF as default value in the next version of TRM. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Acked-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220626070817.3780977-2-srinivas.neeli@xilinx.com
2022-07-26rtc: sun6i: add support for R329 RTCIcenowy Zheng1-0/+2
Allwinner R329 has a RTC with a similar time storage with H616 but a slightly different clock part. As we have already handled the R329 RTC clocks in the CCU driver, add a compatible string to RTC driver to allow probing of the RTC. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220626042756.58961-1-samuel@sholland.org
2022-06-24rtc: Directly use ida_alloc()/free()keliu1-3/+3
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220527073636.2474546-1-liuke94@huawei.com
2022-06-24rtc: Introduce ti-k3-rtcNishanth Menon3-0/+692
Introduce support for Texas Instruments Real Time Clock controller on newer K3 family of SoCs such as AM62x. The hardware module that is being supported is the "digital only" version which doesn't have capability of external wakeup sources and external power backup. However, for many practical applications, this should suffice as RTC is operational across low power sequences. The hardware block by itself is split into two distinct domains internally to further reduce the power consumption with the actual counter block and comparators clocked off a 32k clock source (which based on SoC integration can be sourced by an external crystal) and an register interface block which is driven by the bus clock. While optimal from power perspective, it does create some complicated synchronizations and sequences that one must be wary of in the driver handling. Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Georgi Vlaev <g-vlaev@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220623170808.20998-3-nm@ti.com
2022-06-24rtc: Add driver for Microchip PolarFire SoCConor Dooley3-0/+337
Add support for the built-in RTC on Microchip PolarFire SoC Co-Developed-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220601123320.2861043-2-conor.dooley@microchip.com
2022-06-24rtc: use simple i2c probeStephen Kitt21-63/+42
All these drivers have an i2c probe function which doesn't use the "struct i2c_device_id *id" parameter, so they can trivially be converted to the "probe_new" style of probe with a single argument. This change was done using the following Coccinelle script, and fixed up for whitespace changes: @ rule1 @ identifier fn; identifier client, id; @@ - static int fn(struct i2c_client *client, const struct i2c_device_id *id) + static int fn(struct i2c_client *client) { ...when != id } @ rule2 depends on rule1 @ identifier rule1.fn; identifier driver; @@ struct i2c_driver driver = { - .probe + .probe_new = ( fn | - &fn + fn ) , }; Signed-off-by: Stephen Kitt <steve@sk2.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220610162346.4134094-1-steve@sk2.org
2022-06-24rtc: Remove unused rtc_dev_exit().Tetsuo Handa2-11/+0
Commit 270a3bd6bdc21407 ("rtc: make class.c explicitly non-modular") removed rtc_dev_exit() call. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1e2f9a99-435d-e149-7456-dfacd53be85a@I-love.SAKURA.ne.jp
2022-06-24rtc: Replace flush_scheduled_work() with flush_work().Tetsuo Handa1-1/+1
Since "struct rtc_device" is per a device struct, I assume that clear_uie() needs to wait for only one work associated with that device. Therefore, wait for only that work using flush_work(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/8d3a0f55-d861-ba93-0d25-b1172eaa8343@I-love.SAKURA.ne.jp
2022-06-24rtc: isl1208: do not advertise update interrupt feature if no interrupt ↵Quentin Schulz1-3/+7
specified If an ISL1208 device does not have an interrupt line routed, the feature shouldn't be advertised (it is by default in rtc core) or it'll confuse userspace requesting that feature (such as hwclock from util-linux). Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220523145320.123713-1-foss+kernel@0leil.net
2022-06-24rtc: rv8803: re-initialize all Epson RX8803 registers on voltage lossAhmad Fatoum1-2/+38
The reference manuals of both the RX8803 and RV8803 dictate that "[On V2F/VLF = ] all registers must be initialized". The RV-8803 application manual (rev. 1.6) further specifies that crossing V_LOW2 threshold enables flag V2F and triggers a Power-On reset. According to table 3.11 in the document, all control registers are defined to sensible values. However, The Epson RX-8803 doesn't offer the same guarantees. It explicitly states: During the initial power-up, the TEST bit is reset to "0" and the VLF bit is set to "1". ∗ At this point, all other register values are _undefined_, so be sure to perform a reset before using the module. Commit d3700b6b6479 ("rtc: rv8803: Stop the clock while setting the time") also had this rationale: Indeed, all the registers must be initialized if the voltage has been lower than VLOW2 (triggering V2F), but not low enough to trigger a POR. We should follow the advice and initialize all applicable registers. We can group the registers into 3 groups: A) Already correctly handled registers: * 0B-0Ch | Timer Counter | unused and disabled by clearing TE in 0Dh * 0Dh | Extension Reg | already initialized in rv8803_regs_configure * 0Eh | Flag Reg | handled in IRQ handler, except for VLF, VDET * 0Eh | VLF, VDET | cleared in ->set_time * 10h | 100th Seconds | Already reset via RESET bit * 20-21h | Capture Buffer | holds timestamp unused by driver * 2Fh | Event Control | resets automatically B) Registers that are hardware initialized on POR, but not on VLF: * 0Fh | Control Reg * 2Ch | OSC Offset C) RAM that is undefined on voltage loss: * 00-06h | Date/Time * 07h | RAM * 08-0Ah | Alarm This means we should initialize after VLF the registers in group B (RV8803_CTRL and RV8803_OSC_OFFSET). Group C is all-zero after voltage loss on the RV-8803, but undefined on the RX-8803. This is ok for Date/Time because ->get_time returns an error code for as long as the voltage loss flag is active. It's cleared on ->set_time however. Zeroing both RAM and alarm ensures a fixed value is read afterwards. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220426071056.1187235-4-s.hauer@pengutronix.de
2022-06-24rtc: rv8803: initialize registers on post-probe voltage lossAhmad Fatoum1-0/+13
The driver probe currently initializes some registers to non-POR values. These values are not reinstated if the RTC experiences voltage loss later on. Fix this. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220426071056.1187235-3-s.hauer@pengutronix.de
2022-06-24rtc: rv8803: factor out existing register initialization to functionAhmad Fatoum1-14/+29
The driver probe currently initializes some registers to non-POR values. These values are not reinstated if the RTC experiences voltage loss later on. Prepare for fixing this by factoring out the initialization to a separate function. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220426071056.1187235-2-s.hauer@pengutronix.de
2022-06-24rtc: mc146818-lib: reduce RTC_UIP polling periodMateusz Jończyk1-4/+4
Waiting 1ms every time is not necessary, for example on some AMD boxes the RTC_UIP bit is documented as being high for around 270 microseconds in some cases [1], which agreed with experiments on an SB710 southbridge. So 100us seems optimal. This in preparation for mach_get_cmos_time() refactoring. The functions mc146818_get_time() and mach_get_cmos_time() in arch/x86/kernel/rtc.c perform the same function and the code is duplicated. mach_get_cmos_time() is busy waiting for the RTC_UIP bit to clear, so make mc146818_get_time() more similar to it by reducing the polling period. [1] AMD SB700/710/750 Register Reference Guide, page 307, https://developer.amd.com/wordpress/media/2012/10/43009_sb7xx_rrg_pub_1.00.pdf "SB700 A12: The UIP high pulse is 270 μS Typical when SS on SRC clock is OFF and 100μ min when SRC SS is ON." [sic] Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220225215011.861477-2-mat.jonczyk@o2.pl
2022-06-02Merge tag 'arm-multiplatform-5.19-2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM multiplatform updates from Arnd Bergmann: "The second part of the multiplatform changes now converts the Intel/Marvell PXA platform along with the rest. The patches went through several rebases before the merge window as bugs were found, so they remained separate. This has to touch a lot of drivers, in particular the touchscreen, pcmcia, sound and clk bits, to detach the driver files from the platform and board specific header files" * tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits) ARM: pxa/mmp: remove traces of plat-pxa ARM: pxa: convert to multiplatform ARM: pxa/sa1100: move I/O space to PCI_IOBASE ARM: pxa: remove support for MTD_XIP ARM: pxa: move mach/*.h to mach-pxa/ ARM: PXA: fix multi-cpu build of xsc3 ARM: pxa: move plat-pxa to drivers/soc/ ARM: mmp: rename pxa_register_device ARM: mmp: remove tavorevb board support ARM: pxa: remove unused mach/bitfield.h ARM: pxa: move clk register definitions to driver ARM: pxa: move smemc register access from clk to platform cpufreq: pxa3: move clk register access to clk driver ARM: pxa: remove get_clk_frequency_khz() ARM: pxa: pcmcia: move smemc configuration back to arch ASoC: pxa: i2s: use normal MMIO accessors ASoC: pxa: ac97: use normal MMIO accessors ASoC: pxa: use pdev resource for FIFO regs Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops Input: wm97xx - switch to using threaded IRQ ...
2022-06-01Merge tag 'rtc-5.19' of ↵Linus Torvalds11-18/+500
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A new driver represents the bulk of the changes and then we get the usual small fixes. New driver: - Renesas RZN1 rtc Drivers: - sun6i: Add nvmem support" * tag 'rtc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: mxc: Silence a clang warning rtc: rzn1: Fix a variable type rtc: rzn1: Fix error code in probe rtc: rzn1: Avoid mixing variables rtc: ftrtc010: Fix error handling in ftrtc010_rtc_probe rtc: mt6397: check return value after calling platform_get_resource() rtc: rzn1: fix platform_no_drv_owner.cocci warning rtc: gamecube: Add missing iounmap in gamecube_rtc_read_offset_from_sram rtc: meson: Fix email address in MODULE_AUTHOR rtc: simplify the return expression of rx8025_set_offset() rtc: pcf85063: Add a compatible entry for pca85073a dt-binding: pcf85063: Add an entry for pca85073a MAINTAINERS: Add myself as maintainer of the RZN1 RTC driver rtc: rzn1: Add oscillator offset support rtc: rzn1: Add alarm support rtc: rzn1: Add new RTC driver dt-bindings: rtc: rzn1: Describe the RZN1 RTC rtc: sun6i: Add NVMEM provider
2022-06-01rtc: mxc: Silence a clang warningFabio Estevam1-1/+1
Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/rtc/rtc-mxc.c:315:19: warning: cast to smaller integer type 'enum imx_rtc_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: ba7aa63000f2 ("rtc: mxc: use of_device_get_match_data") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220526011459.1167197-1-festevam@gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 09:58:22 +0000