summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2015-04-17drivers/rtc/rtc-ds1685.c: remove .owner assignment from platform_driverJoshua Kinard1-1/+0
The rtc driver core now sets the platform_driver 'owner' property, so remove the assignment from the DS1685 driver. Fixes: aaaf5fbf56f1: "rtc: add driver for DS1685 family of real time clocks" Signed-off-by: Joshua Kinard <kumba@gentoo.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-ab-b5ze-s3.c: constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-s3c.c: delete duplicate clock controlChanwoo Choi1-124/+39
The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Kukjin Kim <kgene@kernel.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: hctosys: do not treat lack of RTC device as errorFloris Bos1-1/+1
When using device trees on the ARM platform, it is not certain at compile time whether or not the system will have a RTC. If one enables CONFIG_HCTOSYS just in case the system booted has a RTC, and it turns out not to be, this will result in a big fat "unable to open rtc device" error being printed to console, even when "quiet" is set in the kernel cmdline. Fix this by outputting the message with loglevel info instead. Signed-off-by: Floris Bos <bos@je-eigen-domein.nl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-x1205.c: use sign_extend32() for sign extensionMartin Kepplinger1-2/+2
Despite its name, sign_extend32() is safe to use for 8 bit types too. (See https://lkml.org/lkml/2015/1/18/289). Signed-off-by: Martin Kepplinger <martink@posteo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-em3027.c: add device tree supportPeter Robinson1-0/+11
Set the of_match_table for this driver so that devices can be described in the device tree. This device is used in the Trimslice and is already defined in the Trimslice device tree. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17rtc: stmp3xxx: use optional crystal in low power statesUwe Kleine-König1-6/+60
The rtc's status register allows to determine if a 32k crystal is connected to keep the rtc running in low power states provided the corresponding fuse bits were blown correctly during production. (In case they were not, the right frequency can be stated in the device tree.) If there is no such crystal available force the 24 MHz XTAL clock to keep running to retain the right date and time. Otherwise use the crystal to save some power. It would be nice to only switch to the crystal when the XTAL clock is about to be disabled and keep the crystal off when unneeded because XTAL is always on while the chip is powered on. But as sudden power loss isn't detectable this is not save. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17drivers/rtc/rtc-pcf8563.c: simplify return from functionRobert Kmiec1-6/+1
This commit does not change any logic here. It just makes the code easier to read. This is how it looked like: If err != 0 return err; else return 0; Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15rtc: remove use of seq_printf return valueJoe Perches4-28/+34
The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14Merge tag 'mfd-for-linus-4.1' of ↵Linus Torvalds1-60/+0
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - Rename child driver [axp288_battery => axp288_fuel_gauge]; axp20x - Rename child driver [max77693-flash => max77693-led]; max77693 - Error handling fixes; intel_soc_pmic - GPIO tweaking; intel_soc_pmic - Remove non-DT code; vexpress-sysreg, tc3589x - Remove unused/legacy code; ti_am335x_tscadc, rts5249, rtsx_gops, rtsx_pcr, rtc-s5m, sec-core, max77693, menelaus, wm5102-tables - Trivial fixups; rtsx_pci, da9150-core, sec-core, max7769, max77693, mc13xxx-core, dln2, hi6421-pmic-core, rk808, twl4030-power, lpc_ich, menelaus, twl6040 - Update register/address values; rts5227, rts5249 - DT and/or binding document fixups; arizona, da9150, mt6397, axp20x, qcom-rpm, qcom-spmi-pmic - Couple of trivial core Kconfig fixups - Remove use of seq_printf return value; ab8500-debugfs - Remove __exit markups; menelaus, tps65010 - Fix platform-device name collisions; mfd-core New drivers/supported devices: - Add support for wm8280/wm8281 into arizona - Add support for COMe-cBL6 into kempld-core - Add support for rts524a and rts525a into rts5249 - Add support for ipq8064 into qcom_rpm - Add support for extcon into axp20x - New MediaTek MT6397 PMIC driver - New Maxim MAX77843 PMIC dirver - New Intel Quark X1000 I2C-GPIO driver - New Skyworks SKY81452 driver" * tag 'mfd-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: sec: Fix RTC alarm interrupt number on S2MPS11 mfd: wm5102: Remove registers for output 3R from readable list mfd: tps65010: Remove incorrect __exit markups mfd: devicetree: bindings: Add Qualcomm RPM regulator subnodes mfd: axp20x: Add support for extcon cell mfd: lpc_ich: Sort IDs mfd: twl6040: Remove wrong and unneeded "platform:twl6040" modalias mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's mfd: axp20x: Fix duplicate const for model names mfd: menelaus: Use macro for magic number mfd: menelaus: Drop support for SW controller VCORE mfd: menelaus: Delete omap_has_menelaus mfd: arizona: Correct type of gpio_defaults mfd: lpc_ich: Sort IDs mfd: Fix a typo in Kconfig mfd: qcom_rpm: Add support for IPQ8064 mfd: devicetree: qcom_rpm: Document IPQ8064 resources mfd: core: Fix platform-device name collisions mfd: intel_quark_i2c_gpio: Don't crash if !DMI dt-bindings: Add vendor-prefix for X-Powers ...
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - quite a few firmware fixes for RMI driver by Andrew Duggan - huion and uclogic drivers have been substantially overlaping in functionality laterly. This redundancy is fixed by hid-huion driver being merged into hid-uclogic; work done by Benjamin Tissoires and Nikolai Kondrashov - i2c-hid now supports ACPI GPIO interrupts; patch from Mika Westerberg - Some of the quirks, that got separated into individual drivers, have historically had EXPERT dependency. As HID subsystem matured (as well as the individual drivers), this made less and less sense. This dependency is now being removed by patch from Jean Delvare - Logitech lg4ff driver received a couple of improvements for mode switching, by Michal Malý - multitouch driver now supports clickpads, patches by Benjamin Tissoires and Seth Forshee - hid-sensor framework received a substantial update; namely support for Custom and Generic pages is being added; work done by Srinivas Pandruvada - wacom driver received substantial update; it now supports i2c-conntected devices (Mika Westerberg), Bamboo PADs are now properly supported (Benjamin Tissoires), much improved battery reporting (Jason Gerecke) and pen proximity cleanups (Ping Cheng) - small assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (68 commits) HID: sensor: Update document for custom sensor HID: sensor: Custom and Generic sensor support HID: debug: fix error handling in hid_debug_events_read() Input - mt: Fix input_mt_get_slot_by_key HID: logitech-hidpp: fix error return code HID: wacom: Add support for Cintiq 13HD Touch HID: logitech-hidpp: add a module parameter to keep firmware gestures HID: usbhid: yet another mouse with ALWAYS_POLL HID: usbhid: more mice with ALWAYS_POLL HID: wacom: set stylus_in_proximity before checking touch_down HID: wacom: use wacom_wac_finger_count_touches to set touch_down HID: wacom: remove hardcoded WACOM_QUIRK_MULTI_INPUT HID: pidff: effect can't be NULL HID: add quirk for PIXART OEM mouse used by HP HID: add HP OEM mouse to quirk ALWAYS_POLL HID: wacom: ask for a in-prox report when it was missed HID: hid-sensor-hub: Fix sparse warning HID: hid-sensor-hub: fix attribute read for logical usage id HID: plantronics: fix Kconfig default HID: pidff: support more than one concurrent effect ...
2015-04-13Merge branch 'for-4.1/sensor-hub' into for-linusJiri Kosina1-1/+1
Conflicts: drivers/iio/common/hid-sensors/hid-sensor-trigger.c include/linux/hid-sensor-hub.h
2015-04-03time, drivers/rtc: Don't bother with rtc_resume() for the nonstop clocksourceXunlei Pang1-2/+2
If a system does not provide a persistent_clock(), the time will be updated on resume by rtc_resume(). With the addition of the non-stop clocksources for suspend timing, those systems set the time on resume in timekeeping_resume(), but may not provide a valid persistent_clock(). This results in the rtc_resume() logic thinking no one has set the time and it then will over-write the suspend time again, which is not necessary and only increases clock error. So, fix this for rtc_resume(). This patch also improves the name of persistent_clock_exist to make it more grammatical. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-19-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc: Remove redundant rtc_valid_tm() from rtc_resume()Xunlei Pang1-4/+0
rtc_read_time() has already judged valid tm by rtc_valid_tm(), so just remove it. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-17-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/mxc: Update driver to address y2038/y2106 issuesXunlei Pang1-4/+4
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Replacing rtc_tm_to_time() with rtc_tm_to_time64() - Changing mxc_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-14-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/mxc: Convert get_alarm_or_time()/set_alarm_or_time() to use time64_tXunlei Pang1-15/+14
We want to convert mxc_rtc_set_mmss() to use rtc_class_ops's set_mmss64(), but it uses get_alarm_or_time()/set_alarm_or_time() internal interfaces which are y2038 unsafe. So here as a separate patch, it converts these two internal interfaces of "mxc" to use safe time64_t to make some preparations. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/mxc: Modify rtc_update_alarm() not to touch the alarm timeXunlei Pang1-18/+4
rtc_class_ops's set_alarm() shouldn't deal with the alarm date, as this is handled in the rtc core. See rtc_dev_ioctl()'s RTC_ALM_SET and RTC_WKALM_SET cases. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-12-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/mc13xxx: Update driver to address y2038/y2106 issuesXunlei Pang1-18/+14
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Changing mc13xxx_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-11-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/ab3100: Update driver to address y2038/y2106 issuesXunlei Pang1-28/+27
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing rtc_tm_to_time() with rtc_tm_to_time64() - Replacing rtc_time_to_tm() with rtc_time64_to_tm() - Changing ab3100_rtc_set_mmss() to use rtc_class_ops's set_mmss64() After this patch, the driver should not have any remaining y2038/y2106 issues. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-10-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc/test: Update driver to address y2038/y2106 issuesXunlei Pang1-2/+17
This driver has a number of y2038/y2106 issues. This patch resolves them by: - Replacing get_seconds() with ktime_get_real_seconds() - Replacing rtc_time_to_tm() with rtc_time64_to_tm() Also add test_rtc_set_mmss64() for testing rtc_class_ops's set_mmss64(), which can be activated by "test_mmss64" module parameter. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-9-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03drivers/rtc: Provide y2038 safe rtc_class_ops.set_mmss() replacementXunlei Pang2-2/+11
Currently the rtc_class_op's set_mmss() function takes a 32-bit second value (on 32-bit systems), which is problematic for dates past y2038. This patch provides a safe version named set_mmss64() using y2038 safe time64_t. After this patch, set_mmss() is deprecated and all its users will be fixed to use set_mmss64(), it can be removed when having no users. Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> [jstultz: Add whitespace fix for checkpatch] Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-8-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-03time: Add y2038 safe update_persistent_clock64()Xunlei Pang1-1/+1
As part of addressing in-kernel y2038 issues, this patch adds update_persistent_clock64() and replaces all the call sites of update_persistent_clock() with this function. This is a __weak implementation, which simply calls the existing y2038 unsafe update_persistent_clock(). This allows architecture specific implementations to be converted independently, and eventually y2038-unsafe update_persistent_clock() can be removed after all its architecture specific implementations have been converted to update_persistent_clock64(). Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1427945681-29972-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-25drivers/rtc/rtc-mrst: fix suspend/resumeLars-Peter Clausen1-8/+9
The Moorestown RTC driver implements suspend and resume callbacks and assigns them to the suspend and resume fields of the device_driver struct. These callbacks are never actually called by anything though. Modify the driver to properly use dev_pm_ops so that the suspend and resume functions are actually executed upon suspend/resume. [akpm@linux-foundation.org: device_driver.name is const char *] Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Feng Tang <feng.tang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-18rtc: at91rm9200: double locking bug in at91_rtc_interrupt()Dan Carpenter1-1/+1
There is a typo here so we deadlock. Fixes: dd1f1f391dd7 ('rtc: at91rm9200: rework wakeup and interrupt handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-12drivers/rtc/rtc-s3c.c: add .needs_src_clk to s3c6410 RTC dataJavier Martinez Canillas1-0/+1
Commit df9e26d093d3 ("rtc: s3c: add support for RTC of Exynos3250 SoC") added an "rtc_src" DT property to specify the clock used as a source to the S3C real-time clock. Not all SoCs needs this so commit eaf3a659086e ("drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock") changed to check the struct s3c_rtc_data .needs_src_clk to conditionally grab the clock. But that commit didn't update the data for each IP version so the RTC broke on the boards that needs a source clock. This is the case of at least Exynos5250 and Exynos5440 which uses the s3c6410 RTC IP block. This commit fixes the S3C rtc on the Exynos5250 Snow and Exynos5420 Peach Pit and Pi Chromebooks. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Doug Anderson <dianders@chromium.org> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@linaro.org> Cc: Tyler Baker <tyler.baker@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-06Merge branch 'irq-pm'Rafael J. Wysocki2-26/+109
* irq-pm: genirq / PM: describe IRQF_COND_SUSPEND tty: serial: atmel: rework interrupt and wakeup handling watchdog: at91sam9: request the irq with IRQF_NO_SUSPEND clk: at91: implement suspend/resume for the PMC irqchip rtc: at91rm9200: rework wakeup and interrupt handling rtc: at91sam9: rework wakeup and interrupt handling PM / wakeup: export pm_system_wakeup symbol genirq / PM: Add flag for shared NO_SUSPEND interrupt lines genirq / PM: better describe IRQF_NO_SUSPEND semantics
2015-03-04rtc: at91rm9200: rework wakeup and interrupt handlingBoris BREZILLON1-14/+48
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-04rtc: at91sam9: rework wakeup and interrupt handlingBoris BREZILLON1-12/+61
The IRQ line used by the RTC device is usually shared with the system timer (PIT) on at91 platforms. Since timers are registering their handlers with IRQF_NO_SUSPEND, we should expect being called in suspended state, and properly wake the system up when this is the case. Set IRQF_COND_SUSPEND flag when registering the IRQ handler to inform irq core that it can safely be called while the system is suspended. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-03rtc: s5m: Remove unused watchdog and sudden momentary power lossKrzysztof Kozlowski1-60/+0
The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) are never enabled. These are left-overs from board files. After removing them the driver's shutdown callback is empty so get rid of it as well. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-02-28drivers/rtc/rtc-ds1685.c: fix conditional in ↵Joshua Kinard1-2/+2
ds1685_rtc_sysfs_time_regs_{show,store} Fix a conditional statement checking for NULL in both ds1685_rtc_sysfs_time_regs_show and ds1685_rtc_sysfs_time_regs_store that was using a logical AND when it should be using a logical OR so that we fail out of the function properly if the condition ever evaluates to true. Fixes: aaaf5fbf56f1 ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Joshua Kinard <kumba@gentoo.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28rtc: ds1685: remove superfluous checks for out-of-range u8 valuesGeert Uytterhoeven1-6/+6
drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_read_alarm': drivers/rtc/rtc-ds1685.c:402: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:409: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:416: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c: In function `ds1685_rtc_set_alarm': drivers/rtc/rtc-ds1685.c:475: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:478: warning: comparison is always true due to limited range of data type drivers/rtc/rtc-ds1685.c:481: warning: comparison is always true due to limited range of data type u8 cannot contain a value larger than 0xff, hence drop the checks. Wrapping the checks in unlikely() indicated some sense of humor, though ;-) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Joshua Kinard <kumba@gentoo.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-28rtc: ds1685: fix ds1685_rtc_alarm_irq_enable build errorArnd Bergmann1-2/+0
The newly added ds1685 driver causes a build error when enabled without CONFIG_RTC_INTF_DEV: drivers/rtc/rtc-ds1685.c:919:22: error: 'ds1685_rtc_alarm_irq_enable' undeclared here (not in a function) .alarm_irq_enable = ds1685_rtc_alarm_irq_enable, Apparently the driver was incorrectly changed to reflect the interface change from 16380c153a69c ("RTC: Convert rtc drivers to use the alarm_irq_enable method"), which removed the respective #ifdef from all other rtc drivers. This does the same change that was merged for the other drivers before and removes the #ifdef, allowing the interrupts to be enabled through the in-kernel rtc interface independent of the existence of /dev/rtc. Fixes: aaaf5fbf56f ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joshua Kinard <kumba@gentoo.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-23HID: hid-sensor-hub: Extend API for async readsSrinivas Pandruvada1-1/+1
Add additional flag to read in async mode. In this mode the caller will get reply via registered callback for capture_sample. Callbacks can be registered using sensor_hub_register_callback function. The usage id parameter of the capture_sample can be matched with the usage id of the requested attribute. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-19Merge branch 'kconfig' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-17Merge tag 'cleanup-for-linus' of ↵Linus Torvalds1-28/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This is a good healthy set of various code removals. Total net delta is 8100 lines removed. Among the larger cleanups are: - Removal of old Samsung S3C DMA infrastructure by Arnd - Removal of the non-DT version of the 'lager' board by Magnus Damm - General stale code removal on OMAP and Davinci by Rickard Strandqvist - Removal of non-DT support on am3517 platforms by Tony Lindgren ... plus several other cleanups of various platforms across the board" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits) ARM: sirf: drop redundant function and marco declaration arm: omap: specify PMUs are for ARMv7 CPUs arm: shmobile: specify PMUs are for ARMv7 CPUs arm: iop: specify PMUs are for XScale CPUs arm: pxa: specify PMUs are for XScale CPUs arm: realview: specify PMU types ARM: SAMSUNG: remove unused DMA infrastructure ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC ARM: davinci: Remove CDCE949 driver ARM: at91: remove useless at91rm9200_set_type() ARM: at91: remove useless at91rm9200_dt_initialize() ARM: at91: move debug-macro.S into the common space ARM: at91: remove useless at91_sysirq_mask_rtx ARM: at91: remove useless config MACH_AT91SAM9_DT ARM: at91: remove useless config MACH_AT91RM9200_DT ARM: at91: remove unused mach/memory.h ARM: at91: remove useless header file includes ARM: at91: remove unneeded header file rtc: at91/Kconfig: remove useless options ARM: at91/Documentation: add a README for Atmel SoCs ...
2015-02-16rtc: add driver for DS1685 family of real time clocksJoshua Kinard3-0/+2343
This adds a driver for the Dallas/Maxim DS1685-family of RTC chips. It supports the DS1685/DS1687, DS1688/DS1691, DS1689/DS1693, DS17285/DS17287, DS17485/DS17487, and DS17885/DS17887 RTC chips. These chips are commonly found in SGI O2 and SGI Octane systems. It was originally derived from a driver patch submitted by Matthias Fuchs many years ago for use in EPPC-405-UC modules, which also used these RTCs. In addition to the time-keeping functions, this RTC also handles the shutdown mechanism of the O2 and Octane and acts as a partial NVRAM for the boot PROMS in these systems. Verified on both an SGI O2 and an SGI Octane. Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16rtc: isl12057: deprecate use of isl in compatible string for isilArnaud Ebalard1-1/+2
"isil" and "isl" prefixes are used at various locations inside the kernel to reference Intersil corporation. This patch is part of a series fixing those locations were "isl" is used in compatible strings to use the now expected "isil" prefix instead (NASDAQ symbol for Intersil and most used version). The old compatible string is kept for backward compatibility. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-16rtc: isl12022: deprecate use of isl in compatible string for isilArnaud Ebalard1-1/+2
"isil" and "isl" prefixes are used at various locations inside the kernel to reference Intersil corporation. This patch is part of a series fixing those locations were "isl" is used in compatible strings to use the now expected "isil" prefix instead (NASDAQ symbol for Intersil and most used version). The old compatible string is kept for backward compatibility. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-armada38x: add a new RTC driver for recent mvebu SoCsGregory CLEMENT3-0/+331
The new mvebu SoCs come with a new RTC driver. This patch adds the support for this new IP which is currently found in the Armada 38x SoCs. This RTC provides two alarms, but only the first one is used in the driver. The RTC also allows using periodic interrupts. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Arnaud Ebalard <arno@natisbad.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13rtc: rtc-ab-b5ze-s3: add sub-minute alarm supportArnaud Ebalard1-29/+262
Abracon AB-RTCMC-32.768kHz-B5ZE-S3 alarm is only accurate to the minute. For that reason, UIE mode is currently not supported by the driver. But the device provides a watchdog timer which can be coupled with the alarm mechanism to extend support and provide sub-minute alarm capability. This patch implements that extension. More precisely, it makes use of the watchdog timer for alarms which are less that four minutes in the future (with second accuracy) and use standard alarm mechanism for other alarms (with minute accuracy). Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13rtc: add support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chipArnaud Ebalard3-0/+814
This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Calendar module w/ I2C interface. This support includes RTC time reading and setting, Alarm (1 minute accuracy) reading and setting, and battery low detection. The device also supports frequency adjustment and two timers but those features are currently not implemented in this driver. Due to alarm accuracy limitation (and current lack of timer support in the driver), UIE mode is not supported. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-rk808.c: fix rtc time reading issueChris Zhong1-2/+8
After we set the GET_TIME bit, the rtc time can't be read immediately. We should wait up to 31.25 us, about one cycle of 32khz. Otherwise reading RTC time will return a old time. If we clear the GET_TIME bit after setting, the time of i2c transfer is certainly more than 31.25us. Doug said: : I think we are safe. At 400kHz (the max speed of this part) each bit can : be transferred no faster than 2.5us. In order to do a valid i2c : transaction we need to _at least_ write the address of the device and the : data onto the bus, which is 16 bits. 16 * 2.5us = 40us. That's above the : 31.25us [akpm@linux-foundation.org: tweak comment per review discussion] Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Heiko Stübner <heiko@sntech.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-isl12057.c: constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-at91sam9.c: constify struct regmap_configKrzysztof Kozlowski1-1/+1
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-imxdi.c: add more known register bitsJuergen Borleis1-4/+40
Intended for monitoring and controlling the security features. These bits are required to bring this unit back to live after a security violation event was detected. The code to bring it back to live will follow after a vendor clearance. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-imxdi.c: trivial clean up codeJuergen Borleis1-3/+3
Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree usersArnaud Ebalard1-6/+39
Current in-tree users of ISL12057 RTC chip (NETGEAR ReadyNAS 102, 104 and 2120) do not have the IRQ#2 pin of the chip (associated w/ the Alarm1 mechanism) connected to their SoC, but to a PMIC (TPS65251 FWIW). This specific hardware configuration allows the NAS to wake up when the alarms rings. Recently introduced alarm support for ISL12057 relies on the provision of an "interrupts" property in system .dts file, which previous three users will never get. For that reason, alarm support on those devices is not function. To support this use case, this patch adds a new DT property for ISL12057 (isil,irq2-can-wakeup-machine) to indicate that the chip is capable of waking up the device using its IRQ#2 pin (even though it does not have its IRQ#2 pin connected directly to the SoC). This specific configuration was tested on a ReadyNAS 102 by setting an alarm, powering off the device and see it reboot as expected when the alarm rang w/: # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm # shutdown -h now As a side note, the ISL12057 remains in the list of trivial devices, because the property is not per se required by the device to work but can help handle system w/ specific requirements. In exchange, the new feature is described in details in a specific documentation file. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-isl12057.c: add alarm support to Intersil ISL12057 RTC driverArnaud Ebalard1-8/+305
This patch adds alarm support to Intersil ISL12057 driver. This allows to configure the chip to generate an interrupt when the alarm matches current time value. Alarm can be programmed up to one month in the future and is accurate to the second. The patch was developed to support two different configurations: systems w/ and w/o RTC chip IRQ line connected to the main CPU. The latter is the one found on current 3 kernel users of the chip for which support was initially developed (Netgear ReadyNAS 102, 104 and 2120 NAS). On those devices, the IRQ#2 pin of the chip is not connected to the SoC but to a PMIC. This allows setting an alarm, powering off the device and have it wake up when the alarm rings. To support that configuration the driver does the following: 1. it has alarm_irq_enable() function returns -ENOTTY when no IRQ is passed to the driver. 2. it marks the device as a wakeup source in all cases (whether an IRQ is passed to the driver or not) to have 'wakealarm' sysfs entry created. 3. it marks the device has not supporting UIE mode when no IRQ is passed to the driver (see the commmit message of c9f5c7e7a84f) This specific configuration was tested on a ReadyNAS 102 by setting an alarm, powering off the device and see it reboot as expected when the alarm rang. The former configuration was tested on a Netgear ReadyNAS 102 after some soldering of the IRQ#2 pin of the RTC chip to a MPP line of the SoC (the one used usually handles the reset button). The test was performed using a modified .dts file reflecting this change (see below) and rtc-test.c program available in Documentation/rtc.txt. This test program ran as expected, which validates alarm supports, including interrupt support. As a side note, the ISL12057 remains in the list of trivial devices, i.e. no specific DT binding being added by this patch: i2c core automatically handles extraction of IRQ line info from .dts file. For instance, if one wants to reference the interrupt line for the alarm in its .dts file, adding interrupt and interrupt-parent properties works as expected: isl12057: isl12057@68 { compatible =3D "isil,isl12057"; interrupt-parent =3D <&gpio0>; interrupts =3D <6 IRQ_TYPE_EDGE_FALLING>; reg =3D <0x68>; }; FWIW, if someone is looking for a way to test alarm support on a system on which the chip IRQ line has the ability to boot the system (e.g. ReadyNAS 102, 104, etc): # echo 0 > /sys/class/rtc/rtc0/wakealarm # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm # shutdown -h now With the commands above, after a minute, the system comes back to life. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13drivers/rtc/rtc-pcf2123.c: add support for devicetreeJoshua Clayton1-0/+10
Add compatible string "nxp,rtc-pcf2123" Document the binding Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-09Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "Main changes: - Move efivarfs from the misc filesystem section to pseudo filesystem - Expose firmware platform size in sysfs - Improve robustness of get_memory_map() by removing assumptions on the size of efi_memory_desc_t. - various cleanups and fixes The biggest risk is the get_memory_map() change, which changes the way that both the arm64 and x86 EFI boot stub build the early memory map. There are no known regressions with it at the moment, BYMMV" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Don't look for chosen@0 node on DT platforms firmware: efi: Remove unneeded guid unparse efi/libstub: Call get_memory_map() to obtain map and desc sizes efi: Small leak on error in runtime map code efi: rtc-efi: Mark UIE as unsupported arm64/efi: efistub: Apply __init annotation efi: Expose underlying UEFI firmware platform size to userland efi: Rename efi_guid_unparse to efi_guid_to_str efi: Update the URLs for efibootmgr fs: Make efivarfs a pseudo filesystem, built by default with EFI