summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
AgeCommit message (Collapse)AuthorFilesLines
2016-03-14rtc: pcf2127: add pcf2129 device idAkinobu Mita1-3/+6
There are only a few differences between PCF2127 and PCF2129 (PCF2127 has 512 bytes of general purpose SRAM and count-down timer). The rtc-pcf2127 driver currently doesn't use the PCF2127 specific functionality and Kconfig help text already says this driver supports PCF2127/29, so we can simply add pcf2129 to device id list. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2127: add support for spi interfaceAkinobu Mita2-11/+126
pcf2127 has selectable I2C-bus and SPI-bus interface support. This adds support for SPI interface. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf2127: convert to use regmapAkinobu Mita1-70/+144
pcf2127 has selectable I2C-bus and SPI-bus interface support. Currently rtc-pcf2127 driver only supports I2C. This is preparation for support for SPI interface. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add thermometer hwmon supportMichael Büsch2-0/+129
This adds support to - enable/disable the thermometer - set the temperature scanning interval - read the current temperature that is used for temp compensation. via hwmon interface Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add update_bits helper for eeprom accessMichael Büsch1-14/+25
This simplifies the update of single bits in the eeprom. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds1685: actually spin forever in poweroff error pathJosh Poimboeuf1-0/+1
objtool reports the following warnings: drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: duplicate frame pointer save drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x3: duplicate frame pointer setup drivers/rtc/rtc-ds1685.o: warning: objtool: ds1685_rtc_work_queue()+0x0: frame pointer state mismatch The warning message needs to be improved, but what it really means in this case is that ds1685_rtc_poweroff() has a possible code path where it can actually fall through to the next function in the object code, ds1685_rtc_work_queue(). The bug is caused by the use of the unreachable() macro in a place which is actually reachable. That causes gcc to assume that the printk() immediately before the unreachable() macro never returns, when in fact it does. So gcc places the printk() at the very end of the function's object code. When the printk() returns, the next function starts executing. The surrounding comment and printk message state that the code should spin forever, which explains the unreachable() statement. However the actual spin code is missing. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: hym8563: fix invalid year calculationAlexander Kochetkov1-1/+1
Year field must be in BCD format, according to hym8563 datasheet. Due to the bug year 2016 became 2010. Fixes: dcaf03849352 ("rtc: add hym8563 rtc-driver") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: use rtc->ops_lock to protect alarm operationsAkinobu Mita1-21/+4
ds3232->mutex is used to protect for alarm operations which need to access status and control registers. But we can use rtc->ops_lock instead. rtc->ops_lock is held when most of rtc_class_ops methods are called, so we only need to explicitly acquire it from irq handler in order to protect form concurrent accesses. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: fix issue when irq is shared several devicesAkinobu Mita1-69/+12
ds3232-core requests irq with IRQF_SHARED, so irq can be shared by several devices. But the irq handler for ds3232 unconditionally disables the irq at first and the irq is re-enabled only when the interrupt source was the ds3232's alarm. This behaviour breaks the devices sharing the same irq in the various scenarios. This converts to use threaded irq and remove outdated code in suspend/resume paths. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: remove unused UIE codeAkinobu Mita1-19/+1
UIE mode irqs are handled by the generic rtc core now. But there are remaining unused code fragments for it. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: add register access error checksAkinobu Mita1-7/+22
Add missing register access error checks and make it return error code or print error message. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ONAkinobu Mita1-7/+3
The rtctest (tools/testing/selftests/timers/rtctest.c) found that reading ds3232 rtc device immediately return the value 0x20 (RTC_AF) without waiting alarm interrupt. This is because alarm_irq_enable() of ds3232 driver changes RTC_AF flag in rtc->irq_data. So calling ioctl with RTC_AIE_ON generates invalid value in rtc device. The lower-level driver should not touch rtc->irq_data directly. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: merge ds3232 and ds3234Akinobu Mita4-194/+189
According to "Feature Comparison of the DS323x Real-Time Clocks" (http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and DS3234 are very similar. This merges rtc-ds3232 and rtc-ds3234 with using regmap. This change also enables to support alarm for ds3234. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds3232: convert to use regmapAkinobu Mita1-103/+113
This is preparation for merging rtc-ds3232 i2c driver and rtc-ds3234 spi driver. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Dennis Aberilla <denzzzhome@yahoo.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pxa: fix Kconfig indentationAlexandre Belloni1-4/+4
The pxa section is indented using spaces, use tabs. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add device tree property for trickle chargerMichael Büsch1-3/+103
The trickle charger resistor can be enabled via device tree property trickle-resistor-ohms. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add functions for EEPROM accessMichael Büsch1-0/+125
This adds functions for access to the EEPROM memory on the rv3029. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add i2c register update-bits helperMichael Büsch1-26/+28
This simplifies mask/set operations on device I2C registers. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add missing register definitionsMichael Büsch1-16/+45
This adds all (according to the data sheet) missing register and bit definitions. It also fixes the definition of the trickle charger bit masks. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Add "rv3029" I2C device idMichael Büsch1-0/+1
The C2 suffix does not appear in the latest datasheet, so add a device ID without it. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: Remove all 'C2' suffixes from identifiersMichael Büsch1-147/+148
The C2 suffix does not appear anymore in the latest device and data sheet versions. Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: enable COMPILE_TESTAlexandre Belloni1-23/+23
There are several arch-specific RTC drivers that can be successfully compiled on other platforms. Add a COMPILE_TEST dependency for those. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-03-14rtc: generic: allow building on all architecturesArnd Bergmann1-1/+11
There are four architectures using this driver, but since we can build it with COMPILE_TEST, we should try dealing with the absence of the asm/rtc.h header file, to avoid getting a build error: drivers/rtc/rtc-generic.c:12:21: fatal error: asm/rtc.h: No such file or directory This creates an alternative use of the driver, allowing architectures to pass a set of rtc_class_ops in platform data. We can convert the four architectures to use this and then remove the original code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf8523: properly handle oscillator stop bitAlexandre Belloni1-22/+3
The time and date register of the pcf8223 are undefined after a power reset. Properly handle the OS bit and return -EINVAL when that bit is set. It is properly removed when setting the time. This solves an issue where the time and date may be valid for rtc_valid_tm() but is not the current time. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: remove struct pcf85063Alexandre Belloni1-17/+5
No members of struct pcf85063 are used anymore, remove the whole structure. Reviewed-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: remove useless DRV_VERSIONAlexandre Belloni1-5/+0
Since the driver is mainlined there is no use for a separate version number. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: always show I2CAlexandre Belloni1-1/+0
Always show there is an I2C section, like the other sections. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: ds1685: passing bogus values to irq_restoreDan Carpenter1-4/+4
We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf56f1 ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: Use REGMAP_IRQ_REG for regmap-rtc-irqs initialisationLaxman Dewangan1-6/+6
Use macro REGMAP_IRQ_REG from regmap.h to initialise the regmap irq table for max77686 to have better coding style and improve readability. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: max77686: Add support for MAX20024/MAX77620 RTC IPLaxman Dewangan2-5/+46
Maxim Semiconductor's PMIC MAX77686 has RTC IP which is reused in the MAX77620/MAX20024 PMICs. Add support for these devices in MAX77686 RTC driver. This device does not have RTC alarm pending status outside of RTC IP. The RTC IP is having separate I2C address for its register access. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: mt6397: Remove plaform module aliasJavier Martinez Canillas1-1/+0
The driver uses the MODULE_ALIAS() macro to export a platform module alias to allow the module to be autoloaded if the device is registered using the legacy platform registration mechanism but the driver is always used by OF only machines so the alias is not needed and should just be removed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: remove useless century handlingAlexandre Belloni1-7/+0
pcf85063_get_datetime() tries to handle a century bit but that bit is not documented and the final value is never used anywhere else in the kernel. Reviewed-by: Juergen Borleis <jbe@pengutronix.de> Tested-by: Ulrich Ölmann <u.oelmann@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: vr41xx: Wire up alarm_irq_enableGeert Uytterhoeven1-6/+7
drivers/rtc/rtc-vr41xx.c:229: warning: ‘vr41xx_rtc_alarm_irq_enable’ defined but not used Apparently the conversion to alarm_irq_enable forgot to wire up the callback. Fixes: 16380c153a69c378 ("RTC: Convert rtc drivers to use the alarm_irq_enable method") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rv3029: reword Kconfig optionAlexandre Belloni1-2/+2
The Kconfig option for rv3029 is not mentioning any part number, explicitly show rv3029. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: as3722: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-1/+1
as3722 RTC IRQ is nested threaded and wired to the as3722 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: tps80031: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-1/+1
tps80031 RTC IRQ is nested threaded and wired to the tps80031 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: tps65910: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-1/+1
tps65910 RTC IRQ is nested threaded and wired to the tps65910 inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: tps6586x: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-1/+1
tps6586x RTC IRQ is nested threaded and wired to the tps6586x inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: palmas: Drop IRQF_EARLY_RESUME flagGrygorii Strashko1-2/+1
Palams RTC IRQ is nested threaded and wired to the Palmas inerrupt controller. So, this flag is not required for nested irqs anymore, since commit 3c646f2c6aa9 ("genirq: Don't suspend nested_thread irqs over system suspend") was merged. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: Group Kconfig entries by vendorSoren Brinkmann1-44/+44
The RTC entries are mostly grouped by vendor. Move the few outliers in place. Also, change the one occurrence of 'nxp' to 'NXP' to make all NXP entries consistent. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pic32: Add PIC32 real time clock driverJoshua Henderson3-0/+422
This driver adds support for the PIC32 real time clock and calendar peripheral: - reading and setting time - alarms provided by dedicated IRQ Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: unsupport UIE modeAkinobu Mita1-0/+3
The alarm for rx8025 only has a minute accuracy, so unsupport UIE mode. pcf8563 and hym8563 also have a minute accuracy and unsupport it. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: round up to nearest minute for a minute accuracy alarmAkinobu Mita1-1/+11
The alarm for rx8025 only has a minute accuracy, so round up to nearest minute when setting alarm. Without doing this, rtctest blocks one day after setting alarm to 5 seconds later. pcf8563 and hym8563 also have similar handling. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: protect ctrl1 register update by rtc->ops_lockAkinobu Mita1-0/+4
The ctrl1 register is accessed by alarm operations. But it is updated in threaded interrupt handler without acquiring rtc->ops_lock. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: rx8025: fix irq handler registrationAkinobu Mita1-2/+3
When IRQ line for this chips is connected, devm_request_threaded_irq() refuses to register irq handler with the following message. genirq: Threaded irq requested with handler=NULL and !ONESHOT for irq Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: s5m: De-inline large functions to save spaceKrzysztof Kozlowski1-4/+4
Few functions were marked inline even though they were relatively large and sometimes used in multiple places. De-inline them to let the compiler decide whether optimization makes sense. This fixes inline_hunt report: drivers/rtc/rtc-s5m.c: Deinline s5m8767_rtc_set_alarm_reg, save 704 bytes drivers/rtc/rtc-s5m.c: Deinline s5m8767_wait_for_udr_update, save 192 bytes Reported-by: Denys Vlasenko <vda.linux@googlemail.com> Cc: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: make class.c explicitly non-modularPaul Gortmaker1-13/+0
The Makefile/Kconfig currently controlling compilation of this code is: obj-$(CONFIG_RTC_CLASS) += rtc-core.o rtc-core-y := class.o interface.o drivers/rtc/Kconfig:menuconfig RTC_CLASS drivers/rtc/Kconfig: bool "Real Time Clock" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the code there is no doubt it is builtin-only. We don't replace module.h with init.h since the file does need to know what a struct module is. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: fix time/date settingJuergen Borleis1-23/+55
When setting a new time/date the RTC's clock must be stopped first, in order to write the time/date registers in an atomic manner. So, this change stops the clock first and then writes the time/date registers and the clock control register (to re-enable the clock) in one turn. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: fix time/date readingJuergen Borleis1-0/+7
Check if the RTC signals an invalid time/date (due to a battery power loss for example). In this case ignore the time/date until it is really set again. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14rtc: pcf85063: simplify code to read the current timeJuergen Borleis1-26/+21
By using i2c_smbus_read_i2c_block_data() the code is now much simpler. While at it: when reading the RTC's seconds register, all time/date registers are frozen until the RTC's year register is read. So it is important to read all time/date registers in one turn to not lose a second event. Make it more clear why the read must happen in this way. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 20:16:39 +0000