summaryrefslogtreecommitdiffstats
path: root/drivers/rpmsg
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21rpmsg: core: Make remove handler for rpmsg driver optional.Pi-Hsun Shih1-1/+2
Most other bus (for example, SPI, i2c) have the remove handler for driver optional. Make remove handler for rpmsg driver optional too. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: change header file sort styleLoic Pallardy1-9/+9
Make header files alphabetical order. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: allocate buffer from parentLoic Pallardy1-3/+3
Remoteproc is now capable to create one specific sub-device per virtio link to associate a dedicated memory pool. This implies to change device used by virtio_rpmsg for buffer allocation from grand-parent to parent. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-03rpmsg: glink: smem: Support rx peak for size less than 4 bytesArun Kumar Neelakantam1-8/+4
The current rx peak function fails to read the data if size is less than 4bytes. Use memcpy_fromio to support data reads of size less than 4 bytes. Cc: stable@vger.kernel.org Fixes: f0beb4ba9b18 ("rpmsg: glink: Remove chunk size word align warning") Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-27rpmsg: smd: fix memory leak on channel createColin Ian King1-2/+5
Currently a failed allocation of channel->name leads to an immediate return without freeing channel. Fix this by setting ret to -ENOMEM and jumping to an exit path that kfree's channel. Detected by CoverityScan, CID#1473692 ("Resource Leak") Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: stable@vger.kernel.org Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-01rpmsg: glink: Remove chunk size word align warningChris Lew1-3/+0
It is possible for the chunk sizes coming from the non RPM remote procs to not be word aligned. Remove the alignment warning and continue to read from the FIFO so execution is not stalled. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: Convert to using %pOFn instead of device_node.nameRob Herring2-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-remoteproc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: char: Migrate to iter versions of read and writeBjorn Andersson1-11/+16
In order to be able to use the aio interface for writing to a rpmsg_char the write_iter function must be implemented, so migrate to iter version for read and write functions. Regular read and write uses the iter methods if present and is as such unaffected. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: Add compat ioctl for rpmsg char driverArun Kumar Neelakantam1-0/+2
Add compat ioctl callback to support 32bit user space applications. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Store edge name for glink deviceChris Lew1-0/+6
Channels may need to identify the edge their channel was probed for. Store the edge name by reading the label property from device tree or default to the node name. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: core: add support to power domains for devicesSrinivas Kandagatla1-0/+7
Some of the rpmsg devices need to switch on power domains to communicate with remote processor. For example on Qualcomm DB820c platform LPASS power domain needs to switched on for any kind of audio services. This patch adds the missing power domain support in rpmsg core. Without this patch attempting to play audio via QDSP on DB820c would reboot the system. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: smd: fix kerneldoc warningsSrinivas Kandagatla1-1/+8
This patch fixes below kerneldoc warnings qcom_smd.c:141: warning: Function parameter or member 'dev' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'name' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'new_channel_event' not described in 'qcom_smd_edge' qcom_smd.c:222: warning: Function parameter or member 'qsept' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'registered' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'state_change_event' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'drvdata' not described in 'qcom_smd_channel' qcom_smd.c:737: warning: Function parameter or member 'wait' not described in '__qcom_smd_send' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Fix various kerneldoc warnings.Srinivas Kandagatla1-16/+19
Fix below kerneldoc warnings while building with W=1 qcom_glink_native.c:53: warning: Function parameter or member 'data' not described in 'glink_defer_cmd' qcom_glink_native.c:75: warning: Function parameter or member 'data' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'id' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'size' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'reuse' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'in_use' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'offset' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'node' not described in 'glink_core_rx_intent' qcom_glink_native.c:116: warning: Function parameter or member 'features' not described in 'qcom_glink' qcom_glink_native.c:116: warning: Function parameter or member 'intentless' not described in 'qcom_glink' qcom_glink_native.c:524: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version' qcom_glink_native.c:551: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:570: warning: bad line: wire format and transmit qcom_glink_native.c:604: warning: Function parameter or member 'intent' not described in 'qcom_glink_advertise_intent' qcom_glink_native.c:604: warning: Excess function parameter 'size' description in 'qcom_glink_advertise_intent' qcom_glink_native.c:710: warning: Function parameter or member 'glink' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'cid' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'size' not described in 'qcom_glink_handle_intent_req' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: correctly annotate intent membersSrinivas Kandagatla1-5/+5
As intent structure members are not correctly annotated, leading to below warnings qcom_glink_native.c:614:16: warning: incorrect type in assignment (different base types) qcom_glink_native.c:614:16: expected unsigned short [unsigned] [usertype] id qcom_glink_native.c:614:16: got restricted __le16 [usertype] <noident> qcom_glink_native.c:615:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:615:18: expected unsigned short [unsigned] [usertype] lcid qcom_glink_native.c:615:18: got restricted __le16 [usertype] <noident> qcom_glink_native.c:616:19: warning: incorrect type in assignment (different base types) qcom_glink_native.c:616:19: expected unsigned int [unsigned] [usertype] count qcom_glink_native.c:616:19: got restricted __le32 [usertype] <noident> qcom_glink_native.c:617:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:617:18: expected unsigned int [unsigned] [usertype] size qcom_glink_native.c:617:18: got restricted __le32 [usertype] <noident> qcom_glink_native.c:618:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:618:18: expected unsigned int [unsigned] [usertype] liid qcom_glink_native.c:618:18: got restricted __le32 [usertype] <noident> Fix this by correctly annotating them. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-01rpmsg: smd: Add missing include of sizes.hNiklas Cassel1-0/+1
Add missing include of sizes.h. drivers/rpmsg/qcom_smd.c: In function ‘qcom_smd_channel_open’: drivers/rpmsg/qcom_smd.c:809:36: error: ‘SZ_4K’ undeclared (first use in this function) bb_size = min(channel->fifo_size, SZ_4K); ^~~~~ Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-04rpmsg: smd: do not use mananged resources for endpoints and channelsSrinivas Kandagatla1-9/+9
All the managed resources would be freed by the time release function is invoked. Handling such memory in qcom_smd_edge_release() would do bad things. Found this issue while testing Audio usecase where the dsp is started up and shutdown in a loop. This patch fixes this issue by using simple kzalloc for allocating channel->name and channel which is then freed in qcom_smd_edge_release(). Without this patch restarting a remoteproc would crash the system. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: char: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the rpmsg char driver source file and drop the previous boilerplate license text. The uapi header file already had the SPDX license identifier added as part of a mass update but the license text removal was deferred for later, and this patch drops the same. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: glink: Switch to SPDX license identifierSuman Anna4-36/+4
Use the appropriate SPDX license identifier in various rpmsg glink driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: smd: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the rpmsg SMD backend driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the virtio rpmsg bus driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: Switch to SPDX license identifierSuman Anna3-18/+4
Use the appropriate SPDX license identifier in the rpmsg core source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09Merge tag 'v4.17-rc4' into rpmsg-nextBjorn Andersson1-0/+2
Pick up fixes from rproc-v4.17-1 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: qcom_smd: Access APCS through mailbox frameworkBjorn Andersson2-19/+50
Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Reviewed-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: Add driver_override device attribute for rpmsg_deviceAnup Patel1-0/+39
This patch adds "driver_override" device attribute for rpmsg_device which will allow users to explicitly specify the rpmsg_driver to be used via sysfs entry. The "driver_override" device attribute implemented here is very similar to "driver_override" implemented for platform, pci, and amba bus types. One important use-case of "driver_override" device attribute is to force use of rpmsg_chrdev driver for certain rpmsg_device instances. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: added MODULE_ALIAS for rpmsg_charRamon Fried1-0/+2
Added "rpmsg:rpmsg_chrdev" MODULE_ALIAS to autoload rpmg_chrdev module automatically. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: smd: Use announce_create to process any receive workBjorn Andersson1-0/+18
It is possible that incoming data arrives before the client driver has reached a point in the probe method where adequate context for handling the incoming message has been established. In the event that the client's callback function returns an error the message will be left on the FIFO and by invoking the receive handler after the device has been probed the message will be picked off the FIFO and the callback invoked again. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: Only invoke announce_create for rpdev with endpointsBjorn Andersson1-1/+1
For special rpmsg devices without a primary endpoint there is nothing to announce so don't call the backend announce create function if we didn't create an endpoint. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: smd: Fix container_of macrosBjorn Andersson1-2/+2
The container_of macros should not use the same name for the parameter as the member to use for lookup, as this will result in a compilation error unless the passed parameter has the same name as the member. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27Revert "rpmsg: smd: Create device for all channels"Bjorn Andersson1-0/+5
In an effort to pick up channels that are in a funky state we optimistically tried to open all channels that we found, with the addition that we failed if the other side did not handshake the opening. But as we're starting the modem a second time all channels are found - in a "funky" state - and we try to open them. But the modem firmware requires the IPCRTR to be up in order to initialize. So any channels we try to open before that will fail and will not be opened again. This takes care of the regression, at the cost of reintroducing the previous behavior of handling of channels with "funky" states. Reverts commit c12fc4519f60 ("rpmsg: smd: Create device for all channels") Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-20rpmsg: glink: Use spinlock in tx pathBjorn Andersson1-7/+11
Switch the tx_lock to a spinlock we allow clients to use rpmsg_trysend() from atomic context. In order to allow clients to sleep while waiting for space in the FIFO we release the lock temporarily around the delay; which should be replaced by sending a READ_NOTIF and waiting for the remote to signal us that space has been made available. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-20rpmsg: smd: Use spinlock in tx pathBjorn Andersson1-10/+11
By switching the tx_lock to a spinlock we allow clients to use rpmsg_trysend() from atomic context. The mutex was interruptable as it was previously held for the duration of some client waiting for available space in the FIFO, but this was recently changed to only be held temporarily - allowing us to replace it with a spinlock. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-17rpmsg: smd: use put_device() if device_register failArvind Yadav1-1/+2
if device_register() returned an error! Always use put_device() to give up the reference initialized. unregister device for other return error. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-17rpmsg: glink: use put_device() if device_register failArvind Yadav1-1/+2
if device_register() returned an error! Always use put_device() to give up the reference initialized. And unregister device for other return error. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-05Merge tag 'rpmsg-v4.16' of git://github.com/andersson/remoteprocLinus Torvalds3-18/+54
Pull rpmsg updates from Bjorn Andersson: "This fixes a few issues found in the SMD and GLINK drivers and corrects the handling of SMD channels that are found in an (previously) unexpected state" * tag 'rpmsg-v4.16' of git://github.com/andersson/remoteproc: rpmsg: smd: Fix double unlock in __qcom_smd_send() rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel() rpmsg: smd: Don't hold the tx lock during wait rpmsg: smd: Fail send on a closed channel rpmsg: smd: Wake up all waiters rpmsg: smd: Create device for all channels rpmsg: smd: Perform handshake during open rpmsg: glink: smem: Ensure ordering during tx drivers: rpmsg: remove duplicate includes remoteproc: qcom: Use PTR_ERR_OR_ZERO() in glink prob
2018-01-19rpmsg: smd: Fix double unlock in __qcom_smd_send()Dan Carpenter1-5/+5
We're not holding the lock here, so we shouldn't unlock. Fixes: 178f3f75bb4e ("rpmsg: smd: Don't hold the tx lock during wait") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [bjorn: renamed "out" label to further distinguish the two exit paths] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-02rpmsg: glink: Fix missing mutex_init() in qcom_glink_alloc_channel()Wei Yongjun1-0/+1
qcom_glink_alloc_channel() allocates the mutex but not initialize it. Use mutex_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: smd: Don't hold the tx lock during waitBjorn Andersson1-0/+7
Holding the tx lock while waiting for tx-drain events from the remote side blocks try_send requests from failing quickly, so temporarily drop the tx lock while waiting. While this allows try_send to fail quickly it also could allow a subsequent send to succeed putting a smaller packet in the FIFO while we're waiting for room for our large packet. But as this lock is per channel we expect that clients with ordering concerns implements their own ordering mechanism. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: smd: Fail send on a closed channelBjorn Andersson1-6/+8
Move the check for a closed channel out from the tx-full loop to fail any send request on a non-open channel. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: smd: Wake up all waitersBjorn Andersson1-2/+2
It's possible to have multiple contexts waiting for new channel events and with an upcoming change it's possible to have multiple contexts waiting for a full FIFO. As such we need to wake them all up. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: smd: Create device for all channelsBjorn Andersson1-5/+0
Rather than selectively creating devices only for the channels that the remote have moved to "opening" state let's create devices for all channels found. The driver model will match drivers to the ones we care about and attempt to open these. The one case where this fails is if the user loads a firmware that lacks a particular channel of the previous firmware that was running, in which case we would find the old channel and attempt to probe it. The channel opening handshake will ensure this will result in a graceful failure. The result of this patch is that we will actively open the RPM channel even though it's left in a state other than "opening" after the boot loader's closing of the channel. Tested-by: Will Newton <will.newton@gmail.com> Reported-by: Jeremy McNicoll <jmcnicol@redhat.com> Reported-by: Will Newton <will.newton@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: smd: Perform handshake during openBjorn Andersson1-0/+30
Validate the the remote side is opening the channel that we've found by performing a handshake when opening the channel. Tested-by: Will Newton <will.newton@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-18rpmsg: glink: smem: Ensure ordering during txBjorn Andersson1-0/+3
Ensure the ordering of the fifo write and the update of the write index, so that the index is not updated before the data has landed in the fifo. Acked-By: Chris Lew <clew@codeaurora.org> Reported-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-12-06drivers: rpmsg: remove duplicate includesPravin Shedge1-2/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro4-6/+6
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-17Merge tag 'rpmsg-v4.15' of git://github.com/andersson/remoteprocLinus Torvalds2-12/+42
Pull rpmsg updates from Bjorn Andersson: - turn RPMSG_VIRTIO into a user selectable config - fix few bugs in GLINK - provide the support for specifying initial buffer sizes for GLINK channels. * tag 'rpmsg-v4.15' of git://github.com/andersson/remoteproc: rpmsg: glink: The mbox client knows_txdone rpmsg: glink: Add missing MODULE_LICENSE rpmsg: glink: Use best fit intent during tx rpmsg: glink: Add support to preallocate intents dt-bindings: soc: qcom: Support GLINK intents rpmsg: glink: Initialize the "intent_req_comp" completion variable rpmsg: Allow RPMSG_VIRTIO to be enabled via menuconfig or defconfig
2017-11-15rpmsg: glink: The mbox client knows_txdoneBjorn Andersson1-0/+1
As the GLINK driver is ticking the txdone of the mailbox channel (to implement the doorbell) it needs to set knows_txdone. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-14rpmsg: glink: Add missing MODULE_LICENSEBjorn Andersson1-0/+3
The qcom_glink_native driver is missing a MODULE_LICENSE(), correct this. Fixes: 835764ddd9af ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c") Cc: stable@vger.kernel.org Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30rpmsg: glink: Use best fit intent during txChris Lew1-3/+8
Intents can vary in size, try to find the best fitting remote intent instead of first fit when sending a message to the remote proc. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>