| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix the following coccicheck warning:
drivers/rpmsg/qcom_glink_native.c:1677:8-16:
WARNING: use scnprintf or sprintf
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220607120649.78436-1-zhangxuezhi1@coolpad.com
|
|
The qcom_glink.name is read from DTS but never used further, never
referenced, so drop it. This also fixes kerneldoc warning:
drivers/rpmsg/qcom_glink_native.c:125:
warning: Function parameter or member 'name' not described in 'qcom_glink'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-2-krzysztof.kozlowski@linaro.org
|
|
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad(), to keep existing
pad-behavior of strncpy, similarly to commit 08de420a8014 ("rpmsg:
glink: Replace strncpy() with strscpy_pad()"). This fixes W=1 warning:
In function ‘qcom_glink_rx_close’,
inlined from ‘qcom_glink_work’ at ../drivers/rpmsg/qcom_glink_native.c:1638:4:
drivers/rpmsg/qcom_glink_native.c:1549:17: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
1549 | strncpy(chinfo.name, channel->name, sizeof(chinfo.name));
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220519073330.7187-1-krzysztof.kozlowski@linaro.org
|
|
The rpmsg_chrdev driver has been replaced by the rpmsg_ctrl driver
for the /dev/rpmsg_ctrlX devices management. The reference for the
driver override is now the rpmsg_ctrl.
Update the rpmsg_chrdev_register_device function to reflect the update,
and rename the function to use the rpmsg_ctrldev prefix.
The platform drivers are updated accordingly.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-8-arnaud.pouliquen@foss.st.com
|
|
Replace zero-length array with flexible-array member and make use
of the struct_size() helper in kzalloc(). For example:
struct glink_defer_cmd {
struct list_head node;
struct glink_msg msg;
u8 data[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220216030720.1839503-1-chi.minghao@zte.com.cn
|
|
kernel documentation specification:
"The return value, if any, should be described in a dedicated section
named Return."
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211108140126.3530-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The current design sleeps unconditionally in TX FIFO full case and
wakeup only after sleep timer expires which adds random delays in
clients TX path.
Avoid sleep and use READ_NOTIFY command so that writer can be woken up
when remote notifies about read completion by sending IRQ.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-7-git-send-email-deesin@codeaurora.org
|
|
If a channel is being rapidly restarting and the kobj release worker is
busy, there is a chance the rpdev_release function will run after the
channel struct itself has been released.
There should not be a need to decouple the channel from rpdev in the
rpdev release since that should only happen from the close commands.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-6-git-send-email-deesin@codeaurora.org
|
|
Un-register and register of rpmsg driver is sending invalid open_ack
on closed channel.
To avoid sending invalid open_ack case unregister the rpmsg device
after receiving the local_close_ack from remote side.
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
[bjorn: s/strlcpy/strscpy/]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-5-git-send-email-deesin@codeaurora.org
|
|
With current design the transport can send packets of size upto
FIFO_SIZE which is 16k and return failure for all packets above 16k.
Add TX_DATA_CONT command to send packets greater than 16k by splitting
into 8K chunks.
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1596086296-28529-4-git-send-email-deesin@codeaurora.org
|
|
The use of strncpy() is considered deprecated for NUL-terminated
strings[1]. Replace strncpy() with strscpy_pad() (as it seems this case
expects the NUL padding to fill the allocation following the flexible
array). This additionally silences a warning seen when building under
-Warray-bounds:
./include/linux/fortify-string.h:38:30: warning: '__builtin_strncpy' offset 24 from the object at '__mptr' is out of the bounds of referenced subobject 'data' with type 'u8[]' {aka 'unsigned char[]'} at offset 24 [-Warray-bounds]
38 | #define __underlying_strncpy __builtin_strncpy
| ^
./include/linux/fortify-string.h:50:9: note: in expansion of macro '__underlying_strncpy'
50 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
drivers/rpmsg/qcom_glink_native.c: In function 'qcom_glink_work':
drivers/rpmsg/qcom_glink_native.c:36:5: note: subobject 'data' declared here
36 | u8 data[];
| ^~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/20210728020745.GB35706@embeddedor
Link: https://lore.kernel.org/r/20210818060533.3569517-4-keescook@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
When idr_find() returns NULL to intent, no error return code of
qcom_glink_rx_data() is assigned.
To fix this bug, ret is assigned with -ENOENT in this case.
Fixes: 64f95f87920d ("rpmsg: glink: Use the local intents when receiving data")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20210306133624.17237-1-baijiaju1990@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
When the endpoint device is created by the application, a destination
address is specified in the rpmsg_channel_info structure. Since the
rpmsg_endpoint structure does not store the destination address,
this destination address must be specified when sending a message.
Replaces rpmsg_send with rpmsg_sendto to allow to specify the
destination address. This implementation is requested for compatibly with
some rpmsg backends like the virtio backend.
For this, the GLINK an SMD drivers have been updated to support the
rpmsg_sendto, even if the destination address is ignored for these
backends. For these drivers, the rpmsg_send and rpmsg_trysend ops are
preserved to avoid breaking the legacy.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210311140413.31725-5-arnaud.pouliquen@foss.st.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This introduces rpmsg_char support for GLINK and fixes a few issues"
* tag 'rpmsg-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc:
rpmsg: glink: Expose rpmsg name attr for glink
rpmsg: glink: Add support for rpmsg glink chrdev
rpmsg: Guard against null endpoint ops in destroy
rpmsg: glink: Use complete_all for open states
rpmsg: virtio: fix compilation warning for virtio_rpmsg_channel description
rpmsg: Avoid double-free in mtk_rpmsg_register_device
rpmsg: smd: Fix a kobj leak in in qcom_smd_parse_edge()
|
|
Expose the name field as an attr so clients listening to uevents for
rpmsg can identify the edge the events correspond to.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Link: https://lore.kernel.org/r/1593017121-7953-5-git-send-email-deesin@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
RPMSG provides a char device interface to userspace. Probe the rpmsg
chrdev channel to enable the rpmsg_ctrl device creation on glink
transports.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Link: https://lore.kernel.org/r/1593017121-7953-4-git-send-email-deesin@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The open_req and open_ack completion variables are the state variables
to represet a remote channel as open. Use complete_all so there are no
races with waiters and using completion_done.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Link: https://lore.kernel.org/r/1593017121-7953-2-git-send-email-deesin@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
By just cancelling the deferred rx worker during GLINK instance teardown
any pending deferred commands are leaked, so free them.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Attempting to transmit rx_done messages after the GLINK instance is
being torn down will cause use after free and memory leaks. So cancel
the intent_work and free up the pending intents.
With this there are no concurrent accessors of the channel left during
qcom_glink_native_remove() and there is therefor no need to hold the
spinlock during this operation - which would prohibit the use of
cancel_work_sync() in the release function. So remove this.
Fixes: 1d2ea36eead9 ("rpmsg: glink: Add rx done command")
Cc: stable@vger.kernel.org
Acked-by: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The device release function is set before registering with rpmsg. If
rpmsg registration fails, the framework will call device_put(), which
invokes the release function. The channel create logic does not need to
free rpdev if rpmsg_register_device() fails and release is called.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In a remote processor crash scenario, there is no guarantee the remote
processor sent close requests before it went into a bad state. Remove
the reference that is normally handled by the close command in the
so channel resources can be released.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Chris Lew <clew@codeaurora.org>
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Extra channel reference put when remote sending OPEN_ACK after timeout
causes use-after-free while handling next remote CLOSE command.
Remove extra reference put in timeout case to avoid use-after-free.
Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver")
Cc: stable@vger.kernel.org
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Memory allocated for re-usable intents are not freed during channel
cleanup which causes memory leak in system.
Check and free all re-usable memory to avoid memory leak.
Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents")
Cc: stable@vger.kernel.org
Acked-By: Chris Lew <clew@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct {
...
struct intent_pair intents[];
} __packed * msg;
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*msg) + sizeof(struct intent_pair) * count
with:
struct_size(msg, intents, count)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
It is possible for the chunk sizes coming from the non RPM remote procs
to not be word aligned. Remove the alignment warning and continue to
read from the FIFO so execution is not stalled.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Channels may need to identify the edge their channel was probed for.
Store the edge name by reading the label property from device tree or
default to the node name.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Fix below kerneldoc warnings while building with W=1
qcom_glink_native.c:53: warning: Function parameter or member 'data' not described in 'glink_defer_cmd'
qcom_glink_native.c:75: warning: Function parameter or member 'data' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'id' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'size' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'reuse' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'in_use' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'offset' not described in 'glink_core_rx_intent'
qcom_glink_native.c:75: warning: Function parameter or member 'node' not described in 'glink_core_rx_intent'
qcom_glink_native.c:116: warning: Function parameter or member 'features' not described in 'qcom_glink'
qcom_glink_native.c:116: warning: Function parameter or member 'intentless' not described in 'qcom_glink'
qcom_glink_native.c:524: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version'
qcom_glink_native.c:524: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version'
qcom_glink_native.c:551: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:551: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version_ack'
qcom_glink_native.c:570: warning: bad line: wire format and transmit
qcom_glink_native.c:604: warning: Function parameter or member 'intent' not described in 'qcom_glink_advertise_intent'
qcom_glink_native.c:604: warning: Excess function parameter 'size' description in 'qcom_glink_advertise_intent'
qcom_glink_native.c:710: warning: Function parameter or member 'glink' not described in 'qcom_glink_handle_intent_req'
qcom_glink_native.c:710: warning: Function parameter or member 'cid' not described in 'qcom_glink_handle_intent_req'
qcom_glink_native.c:710: warning: Function parameter or member 'size' not described in 'qcom_glink_handle_intent_req'
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As intent structure members are not correctly annotated, leading to below warnings
qcom_glink_native.c:614:16: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:614:16: expected unsigned short [unsigned] [usertype] id
qcom_glink_native.c:614:16: got restricted __le16 [usertype] <noident>
qcom_glink_native.c:615:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:615:18: expected unsigned short [unsigned] [usertype] lcid
qcom_glink_native.c:615:18: got restricted __le16 [usertype] <noident>
qcom_glink_native.c:616:19: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:616:19: expected unsigned int [unsigned] [usertype] count
qcom_glink_native.c:616:19: got restricted __le32 [usertype] <noident>
qcom_glink_native.c:617:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:617:18: expected unsigned int [unsigned] [usertype] size
qcom_glink_native.c:617:18: got restricted __le32 [usertype] <noident>
qcom_glink_native.c:618:18: warning: incorrect type in assignment (different base types)
qcom_glink_native.c:618:18: expected unsigned int [unsigned] [usertype] liid
qcom_glink_native.c:618:18: got restricted __le32 [usertype] <noident>
Fix this by correctly annotating them.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Use the appropriate SPDX license identifier in various rpmsg
glink driver source files and drop the previous boilerplate
license text.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Switch the tx_lock to a spinlock we allow clients to use rpmsg_trysend()
from atomic context.
In order to allow clients to sleep while waiting for space in the FIFO
we release the lock temporarily around the delay; which should be
replaced by sending a READ_NOTIF and waiting for the remote to signal
us that space has been made available.
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
qcom_glink_alloc_channel() allocates the mutex but not initialize it.
Use mutex_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As the GLINK driver is ticking the txdone of the mailbox channel (to
implement the doorbell) it needs to set knows_txdone.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The qcom_glink_native driver is missing a MODULE_LICENSE(), correct
this.
Fixes: 835764ddd9af ("rpmsg: glink: Move the common glink protocol implementation to glink_native.c")
Cc: stable@vger.kernel.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Intents can vary in size, try to find the best fitting remote intent
instead of first fit when sending a message to the remote proc.
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The base intents prequeued during channel creation may not satisfy a
channel's throughput requirement. Add support for intents dt-binding to
allow channels to specify the size and amount of intents to prequeue
during endpoint announcement.
Signed-off-by: Chris Lew <clew@codeaurora.org>
[bjorn: Altered how defaults are expressed]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The "intent_req_comp" variable is used without initialization which
results in NULL pointer dereference in qcom_glink_request_intent().
we need to initialize the completion variable before using it.
Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable")
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
We need to free "intent" and "intent->data" on a couple error paths.
Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents")
Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
If qcom_glink_tx() fails, then we need to unlock before returning the
error code.
Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable")
Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The new switch cases for RPM_CMD_RX_DONE, RPM_CMD_RX_DONE_W_REUSE,
RPM_CMD_RX_INTENT_REQ_ACK, RPM_CMD_INTENT and RPM_CMD_RX_INTENT_REQ from
4 recent commits are not setting ret and so a later non-zero check on ret
is testing on a garbage value in ret. Fix this by initializing ret to zero.
Detected by CoverityScan CID#1455249 ("Uninitialized scalar variable")
Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents)
Fixes: dacbb35e930f ("glink: Receive and store the remote intent buffers")
Fixes: 27b9c5b66b23 ("rpmsg: glink: Request for intents when unavailable")
Fixes: 88c6060f5a7f ("rpmsg: glink: Handle remote rx done command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
In the case where glink->intentless is true and the call
to qcom_glink_tx fails then we have a condition where ret is
non-zero and intent is null, causing a null pointer deference
when setting intent->in_use to false. Add an extra check to
only dereference intent if intent is non-null.
Detected by: CoverityScan CID#1455247 ("Explicit null dereferenced")
Fixes: 88c6060f5a7f ("rpmsg: glink: Handle remote rx done command")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The common code needs to export the probe and remove symbols in order
for the SMEM and RPM drivers to access them when compiled as a module.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The idr_lock should be released in the case that we don't find the given
channel.
Fixes: 44f6df922a26 ("rpmsg: glink: Fix idr_lock from mutex to spinlock")
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Once the remote side sends a rx done ack, check for the intent reuse
information from it and suitably discard or reuse the remote passed
intent buffers.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
While sending data, we search for suitable sized intent to map and
simply fail if a intent is not found. Instead request for a intent of
required size and wait till one is alloted.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
While sending data, use the remote intent id buffer of suitable size
that was passed by remote previously.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Just like we allocating and sending intent ids to remote, remote side
allocates and sends us the intents as well. So save the intent ids and
use it later while sending data targeting the appropriate intents based
on the size.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Preallocate local intent buffers and pass the intent ids to the remote.
This way there are some default intents available for the remote to
start sending data without having to wait by sending intent requests. Do
this by adding the rpmsg announce_create ops, which gets called right
after the rpmsg device gets probed.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Send RX data receive ack to remote and also inform that local intent
buffer is used and freed. This informs the remote to request for next
set of intent buffers before doing a send operation.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
To fully read the received rx data from FIFO both the command and data
has to be read. Currently we read command, data separately and process
them. By adding an offset parameter to RX FIFO peak accessor, command
and data can be read together, simplifying things. So introduce this.
Acked-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
