summaryrefslogtreecommitdiffstats
path: root/drivers/reset/reset-uniphier.c
AgeCommit message (Collapse)AuthorFilesLines
2021-10-05reset: uniphier: Add NX1 reset supportKunihiko Hayashi1-0/+25
Add basic reset data for UniPhier NX1 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1633399842-1402-4-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-10-05reset: uniphier: Add audio system and video input reset control for PXs3Kunihiko Hayashi1-0/+2
Add reset lines for audio subsystem (AIO) and video input subsystem (EXIV) on UniPhier PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1633399842-1402-2-git-send-email-hayashi.kunihiko@socionext.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10reset: uniphier: enclose UNIPHIER_RESET_ID_END value in parenthesesPhilipp Zabel1-1/+1
Fixes a checkpatch error: ERROR: Macros with complex values should be enclosed in parentheses #23: FILE: drivers/reset/reset-uniphier.c:23: +#define UNIPHIER_RESET_ID_END (unsigned int)(-1) Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2020-01-02reset: uniphier: Add SCSSI reset control for each channelKunihiko Hayashi1-5/+8
SCSSI has reset controls for each channel in the SoCs newer than Pro4, so this adds missing reset controls for channel 1, 2 and 3. And more, this moves MCSSI reset ID after SCSSI. Fixes: 6b39fd590aeb ("reset: uniphier: add reset control support for SPI") Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-10/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-19reset: uniphier: add reset control support for SPIKunihiko Hayashi1-0/+9
Add reset control for SPI controller on UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: add LD11/LD20 stream demux system reset controlKatsuhiro Suzuki1-0/+2
Add reset lines for MPEG2 transport stream I/O and demux system (HSC) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: add SATA reset control support and change SATA-PHY IDKunihiko Hayashi1-1/+7
Add reset lines for SATA controller on UniPhier SoCs. This adds support for Pro4 and PXs3 in addition to PXs2. And this changes the ID of the reset line for SATA-PHY on PXs2. Since some SoCs have two controller instances with a common PHY, this moves the ID of SATA-PHY for consistency. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: add PCIe reset control supportKunihiko Hayashi1-0/+3
Add reset lines for PCIe controller on UniPhier SoCs. This adds support for Pro5, LD20 and PXs3. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-04-27reset: uniphier: fix USB clock line for LD20Masahiro Yamada1-3/+3
For LD20, the bit 5 of the offset 0x200c turned out to be a USB3 reset. The hardware document says it is the GIO reset despite LD20 has no GIO bus, confusingly. Also, fix confusing comments for PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: uniphier: add ethernet reset control support for PXs3Kunihiko Hayashi1-0/+2
Add reset lines for ethernet controller on PXs3 SoC. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset controlKatsuhiro Suzuki1-0/+3
Add reset lines for audio subsystem (AIO) on UniPhier Pro4/Pro5/PXs2 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-05reset: uniphier: add PXs3 reset dataMasahiro Yamada1-0/+26
Add basic reset data for Socionext's new SoC PXs3. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-04reset: uniphier: add ethernet reset control supportKunihiko Hayashi1-0/+4
Add reset lines for ethernet controller on Pro4, PXs2, LD11 and LD20 SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-14reset: uniphier: add analog amplifiers reset controlKatsuhiro Suzuki1-0/+15
Add a reset line for analog signal amplifier core (ADAMV) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-14reset: uniphier: add video input subsystem reset controlKatsuhiro Suzuki1-0/+2
Add a reset line for video input subsystem (EXIV) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-14reset: uniphier: add audio systems reset controlKatsuhiro Suzuki1-0/+4
Add reset lines for audio subsystem (AIO) and SoC internal audio codec (EVEA) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-11reset: uniphier: do not use per-SoC macro for system reset blockMasahiro Yamada1-33/+15
This macro turned out not so useful as I had expected. Hardware engineers said they would change reset bit assignments for every SoC going forward. This means we can not share the macros among SoCs. Just use primitive macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-08-11reset: uniphier: remove sLD3 SoC supportMasahiro Yamada1-32/+16
This SoC is too old. It is difficult to maintain any longer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-28reset: uniphier: add NAND and eMMC reset controlMasahiro Yamada1-0/+17
Add reset lines for the Denali NAND controller on all UniPhier SoCs, for the Cadence eMMC controller on LD11/LD20 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-08reset: uniphier: fix non static symbol warningsWei Yongjun1-10/+10
Fixes the following sparse warnings: drivers/reset/reset-uniphier.c:68:34: warning: symbol 'uniphier_sld3_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:73:34: warning: symbol 'uniphier_pro4_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:81:34: warning: symbol 'uniphier_pro5_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:89:34: warning: symbol 'uniphier_pxs2_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:103:34: warning: symbol 'uniphier_ld11_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:108:34: warning: symbol 'uniphier_ld20_sys_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:137:34: warning: symbol 'uniphier_sld3_mio_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:157:34: warning: symbol 'uniphier_pro5_sd_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:174:34: warning: symbol 'uniphier_ld4_peri_reset_data' was not declared. Should it be static? drivers/reset/reset-uniphier.c:187:34: warning: symbol 'uniphier_pro4_peri_reset_data' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-01-20reset: uniphier: add compatible string for LD11 SD-reset blockMasahiro Yamada1-0/+4
The LD11 SoC is equipped with not only MIO-reset but also SD-reset for controlling RST_n pin of the eMMC device. Update the binding document and remove unneeded "." from each line in itemization. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-22reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCsMasahiro Yamada1-8/+8
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24reset: uniphier: add reset controller driver for UniPhier SoCsMasahiro Yamada1-0/+440
This is the initial commit for UniPhier reset controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 21:43:07 +0000