summaryrefslogtreecommitdiffstats
path: root/drivers/reset/reset-sunxi.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-17reset: sunxi: use reset-simple driverPhilipp Zabel1-98/+6
Use the newly created copies in the reset-simple driver to replace the sunxi platform driver code and reset operations. The separate sunxi driver still remains to register the early reset controllers, but it reuses the reset operations in reset-simple. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-08-11reset: sunxi: fix number of reset linesPhilipp Zabel1-2/+2
The Allwinner reset controller has 32-bit registers, but resource_size is measured in bytes, not number of registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Chen-Yu Tsai <wens@csie.org>
2017-03-15reset: sunxi: fix for 64-bit compilationAndre Przywara1-8/+10
The Allwinner reset controller has 32-bit registers, so translating the reset cell number into a register and bit offset should not use any architecture dependent data size. Otherwise this breaks for 64-bit architectures like arm64. Fix this by making it clear that it's the hardware register width which matters here in the calculation. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-10-24reset: sunxi: make it explicitly non-modularPaul Gortmaker1-7/+2
The Kconfig currently controlling compilation of this code is: drivers/reset/Kconfig:config RESET_SUNXI drivers/reset/Kconfig: bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI drivers/reset/Kconfig: default ARCH_SUNXI or arch/arm/mach-sunxi/Kconfig:menuconfig ARCH_SUNXI arch/arm/mach-sunxi/Kconfig: bool "Allwinner SoCs" if ARCH_MULTI_V7 ...meaning that it currently is not being built as a module by anyone. Lets remove the few remaining traces of modular macro usage, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-05-30reset: sunxi: use devm_reset_controller_register()Masahiro Yamada1-11/+1
Use devm_reset_controller_register() for the reset controller registration and drop the .remove callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-08reset: sunxi: Make reset_control_ops constPhilipp Zabel1-1/+1
The sunxi_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-11-16reset: check return value of reset_controller_register()Masahiro Yamada1-2/+1
Currently, reset_controller_register() always return 0, but it would be better to check its return code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-16reset: sunxi: mark the of_device_id array as __initconstPhilipp Zabel1-1/+1
Since this array is static const, it should be marked as __initconst. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-16reset: sunxi: fix spinlock initializationTyler Baker1-0/+4
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimus Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-20reset: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-15reset: sunxi: allow MFD subdevices probeBoris BREZILLON1-3/+18
The current implementation uses sunxi_reset_init function for both early init and platform device probe. The sunxi_reset_init function uses DT to retrieve device resources, which will be an issue if reset controllers are registered from an MFD device that define resources from mfd_cell definition. Moreover, we can make of devm functions when we're in the probe context. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2013-11-22reset: Add Allwinner SoCs Reset Controller DriverMaxime Ripard1-0/+175
The Allwinner A31 and most of the other Allwinner SoCs have an IP maintaining a few other IPs in the SoC in reset by default. Among these IPs are the A31's High Speed Timers, hence why we can't use the regular driver construct in every cases, and need to call the registering function directly during machine initialisation. Apart from this, the implementation is fairly straightforward, and could easily be moved to a generic MMIO-based reset controller driver if the need ever arise. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>