summaryrefslogtreecommitdiffstats
path: root/drivers/reset/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-06-06reset: Add the TI SCI reset driverAndrew F. Davis1-0/+1
Some TI Keystone family of SoCs contain a system controller (like the Power Management Micro Controller (PMMC) on 66AK2G SoCs) that manage the low-level device control (like clocks, resets etc) for the various hardware modules present on the SoC. These device control operations are provided to the host processor OS through a communication protocol called the TI System Control Interface (TI SCI) protocol. This patch adds a reset driver that communicates to the system controller over the TI SCI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different TI SCI device operations provided by the TI SCI framework. Signed-off-by: Andrew F. Davis <afd@ti.com> [s-anna@ti.com: documentation changes, revised commit message] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> [p.zabel@pengutronix.de: const struct reset_control_ops] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-24reset: Add a Gemini reset controllerLinus Walleij1-0/+1
The Cortina Systems Gemini reset controller is a simple 32bit register with self-deasserting reset lines. It is accessed using regmap over syscon. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-24reset: ti_syscon: Rename TI_SYSCON_RESET to RESET_TI_SYSCONSuman Anna1-1/+1
Rename the current Kconfig name used for the TI SYSCON Reset driver from TI_SYSCON_RESET to RESET_TI_SYSCON to match the convention used for all the reset drivers present at the base reset folder. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15reset: Add Altera Arria10 SR Reset ControllerThor Thayer1-0/+1
This patch adds the reset controller functionality for Peripheral PHYs to the Arria10 System Resource Chip. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15reset: Add i.MX7 SRC reset driverAndrey Smirnov1-0/+2
Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-01-20reset: zx2967: add reset controller driver for ZTE's zx2967 familyBaoyou Xie1-0/+1
This patch adds reset controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-11-18reset: Add Tegra BPMP reset driverThierry Reding1-0/+1
This driver uses the services provided by the BPMP firmware driver to implement a reset driver based on the MRQ_RESET request. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-30reset: hi6220: allow to compile test driver on other architecturesPhilipp Zabel1-1/+1
Also remove the RESET_CONTROLLER dependency, this Kconfig file is included inside the menuconfig already. Cc: Chen Feng <puck.chen@hisilicon.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: zynq: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: sunxi: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: stm32: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: socfpga: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: pistachio: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Damien Horsley <Damien.Horsley@imgtec.com> Acked-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: meson: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: lpc18xx: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: berlin: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: ath79: add driver Kconfig optionPhilipp Zabel1-1/+1
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Aban Bedel <albeu@free.fr> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24reset: uniphier: add reset controller driver for UniPhier SoCsMasahiro Yamada1-0/+1
This is the initial commit for UniPhier reset controller driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-24drivers: reset: Add STM32 reset driverMaxime Coquelin1-0/+1
The STM32 MCUs family IPs can be reset by accessing some registers from the RCC block. The list of available reset lines is documented in the DT bindings. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-29reset: add TI SYSCON based reset driverAndrew F. Davis1-0/+1
Add a reset-controller driver for performing reset management of various devices present on the SoC, with the reset registers shared between devices in a common register memory space. This driver uses the syscon/regmap frameworks to actually implement the various reset functionalities needed by the reset consumer devices. Signed-off-by: Andrew F. Davis <afd@ti.com> [s-anna@ti.com: add documentation, syscon name change] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-06-01reset: Add support for the Amlogic Meson SoC Reset ControllerNeil Armstrong1-0/+1
This patch adds the platform driver for the Amlogic Meson SoC Reset Controller. The Meson8b and GXBB SoCs are supported. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-04-01reset: Add Oxford Semiconductor Reset Controller driverNeil Armstrong1-0/+1
Add System reset controller driver for Oxford Semiconductor OXNAS SoC Family. CC: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-02-05reset: img: Add Pistachio reset controller driverDamien Horsley1-0/+1
Add reset controller driver for Pistachio SoC Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-20reset: hi6220: Reset driver for hisilicon hi6220 SoCChen Feng1-0/+1
Add reset driver for hi6220-hikey board,this driver supply deassert of IP on hi6220 SoC. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-11-16reset: remove redundant $(CONFIG_RESET_CONTROLLER) from MakefileMasahiro Yamada1-1/+1
The directory drivers/reset/ is guarded by CONFIG_RESET_CONTROLLER in driver/Makefile. CONFIG_RESET_CONTROLLER is boolean, so it always evaluates to 'y' in drivers/reset/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-08-16Merge branch 'reset/ath79' into reset/nextPhilipp Zabel1-0/+1
2015-08-04reset: reset-zynq: Adding support for Xilinx Zynq reset controller.Moritz Fischer1-0/+1
This adds a reset controller driver to control the Xilinx Zynq AP-SoC's various resets. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-08-04reset: Add a driver for the reset controller on the AR71XX/AR9XXXAlban Bedel1-0/+1
The AR71XX/AR9XXX SoC have a simple reset controller with one bit per reset line. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-08-03reset: add driver for lpc18xx rguJoachim Eastwood1-0/+1
Add reset driver for the Reset Generation Unit (RGU) found on NXP LPC18xx and LPC43xx devies. This reset controller features up to 64 reset lines connected to different blocks and peripheral in the SoC. Most reset lines on the controller are self clearing except for those dealing with the Cortex-M0 cores on LPC43xx devices. This driver also registers a restart handler that can be used to reset the entire device. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-10-20reset: add the Berlin reset controller driverAntoine Ténart1-0/+1
Add a reset controller for Marvell Berlin SoCs which is used by the USB PHYs drivers (for now). Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
2014-04-25reset: add driver for socfpgaSteffen Trumtrar1-0/+1
Add a reset-controller driver for the socfpga platform. The reset-controller has four banks with up to 32 entries all encapsulated in one module block. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com> --- Notes: Changes since v2: - remove superfluous ret in probe function - add Acked-by Changes since v1: - use BITS_PER_LONG everywhere instead of MAX_BANK_WIDTH - print pdev->dev.of_node->full_name on error - use proper IS_ERR/PTR_ERR
2014-03-11drivers: reset: STi SoC system configuration reset controller supportStephen Gallimore1-0/+1
This patch adds a reset controller implementation for STMicroelectronics STi family SoCs; it allows a group of related reset like controls found in multiple system configuration registers to be represented by a single controller device. System configuration registers are accessed through the regmap framework and the mfd/syscon driver. The implementation optionally supports waiting for the reset action to be acknowledged in a separate status register and supports both active high and active low reset lines. These properties are common across all the reset channels in a specific reset controller instance, hence all channels in a paritcular controller are expected to behave in the same way. Signed-off-by: Stephen Gallimore <stephen.gallimore@st.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2013-11-22reset: Add Allwinner SoCs Reset Controller DriverMaxime Ripard1-0/+1
The Allwinner A31 and most of the other Allwinner SoCs have an IP maintaining a few other IPs in the SoC in reset by default. Among these IPs are the A31's High Speed Timers, hence why we can't use the regular driver construct in every cases, and need to call the registering function directly during machine initialisation. Apart from this, the implementation is fairly straightforward, and could easily be moved to a generic MMIO-based reset controller driver if the need ever arise. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
2013-04-12reset: Add reset controller APIPhilipp Zabel1-0/+1
This adds a simple API for devices to request being reset by separate reset controller hardware and implements the reset signal device tree binding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Pavel Machek <pavel@ucw.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 13:34:52 +0000