summaryrefslogtreecommitdiffstats
path: root/drivers/reset/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2019-10-24reset: simple: Add Realtek RTD1195/RTD1295Andreas Färber1-1/+2
Enable RESET_SIMPLE for ARCH_REALTEK. They can reuse the DesignWare bindings to avoid a new compatible. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-24reset: simple: Keep alphabetical orderAndreas Färber1-2/+2
Restore alphabetical order for Kconfig dependencies and help text. Compatibles got out of order too, but no functional change done here. Goal is to make it obvious where to add new platforms. Fixes: 64c47b624f64 ("reset: Add reset controller support for BM1880 SoC") Fixes: 1d7592f84f92 ("reset: simple: Enable for ASPEED systems") Fixes: 96a2f50305d1 ("reset: build simple reset controller driver for Agilex") Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-10-22reset: build simple reset controller driver for AgilexDinh Nguyen1-1/+1
The Intel SoCFPGA Agilex platform shares the same reset controller that is on the Stratix10. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-08-14Merge tag 'scmi-updates-5.4' of ↵Arnd Bergmann1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers ARM SCMI updates/fixes for v5.4 Handful of fixes/updates including: 1. SCMI v2.0(recently released) support for: - Performance protocol fast channels - Reset Management Protocol 2. SCMI infrastructure/core support for recieve(Rx) channels, asynchronous commands and delayed response 3. Usage of asynchronous commands for clock rate setting and sensor reading based on the attributes read from the firmware 4. Miscellaneous cleanups(typos, naming alignment with specification, and SPDX License identifier) 5. Couple of fixes: removal of extra check for invalid length and additional check to ensure platform/firmware has released shared memory before using it in OSPM * tag 'scmi-updates-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (22 commits) reset: Add support for resets provided by SCMI firmware: arm_scmi: Add RESET protocol in SCMI v2.0 dt-bindings: arm: Extend SCMI to support new reset protocol firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels firmware: arm_scmi: Use {get,put}_unaligned_le{32,64} accessors firmware: arm_scmi: Use asynchronous CLOCK_RATE_SET when possible firmware: arm_scmi: Drop config flag in clk_ops->rate_set firmware: arm_scmi: Add asynchronous sensor read if it supports firmware: arm_scmi: Drop async flag in sensor_ops->reading_get firmware: arm_scmi: Add support for asynchronous commands and delayed response firmware: arm_scmi: Add mechanism to unpack message headers firmware: arm_scmi: Separate out tx buffer handling and prepare to add rx firmware: arm_scmi: Add receive channel support for notifications firmware: arm_scmi: Segregate tx channel handling and prepare to add rx firmware: arm_scmi: Reorder some functions to avoid forward declarations firmware: arm_scmi: Check if platform has released shmem before using firmware: arm_scmi: Use the term 'message' instead of 'command' firmware: arm_scmi: Fix few trivial typos in comments firmware: arm_scmi: Remove extra check for invalid length message responses ... Link: https://lore.kernel.org/r/20190814172454.26191-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-12reset: Add support for resets provided by SCMISudeep Holla1-0/+11
On some ARM based systems, a separate Cortex-M based System Control Processor(SCP) provides the overall power, clock, reset and system control. System Control and Management Interface(SCMI) Message Protocol is defined for the communication between the Application Cores(AP) and the SCP. Adds support for the resets provided using SCMI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different ARM SCMI device operations provided by the ARM SCMI framework. Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2019-08-06reset: Add DesignWare IP support to simple resetGustavo Pimentel1-1/+1
The reset-simple driver can be now used on DesignWare IPs by default by selecting the following compatible strings: - snps,dw-high-reset for active high resets inputs - snps,dw-low-reset for active low resets inputs Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-07-04Merge tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson1-1/+2
arm/drivers Reset controller changes for v5.3 This tag adds support for the Bitmain BM1880 reset controller to the reset-simple driver and fixes a spelling mistake in the i.MX7 reset controller binding document. * tag 'reset-for-v5.3' of git://git.pengutronix.de/git/pza/linux: dt-bindings: reset: imx7: Fix the spelling of 'indices' reset: Add reset controller support for BM1880 SoC dt-bindings: reset: Add devicetree binding for BM1880 reset controller Link: https://lore.kernel.org/r/1562236632.6641.14.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-24reset: Add reset controller support for BM1880 SoCManivannan Sadhasivam1-1/+2
Add reset controller support for Bitmain BM1880 SoC reusing the reset-simple driver. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-28reset: imx7: Add support for i.MX8MQ IP block variantAndrey Smirnov1-2/+2
Add bits and pieces needed to support IP block variant found on i.MX8MQ SoCs. Cc: p.zabel@pengutronix.de Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: cphealy@gmail.com Cc: l.stach@pengutronix.de Cc: Leonard Crestez <leonard.crestez@nxp.com> Cc: "A.s. Dong" <aisheng.dong@nxp.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-imx@nxp.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> [p.zabel@pengutronix.de: fixed whitespace alignment] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-28reset: Add Broadcom STB SW_INIT reset controller driverFlorian Fainelli1-0/+8
Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: uniphier-usb3: Rename to reset-uniphier-glueKunihiko Hayashi1-5/+5
This driver works for controlling the reset lines including USB3 glue layer, however, this can be applied to other glue layers. Now this patch renames the driver from "reset-uniphier-usb3" to "reset-uniphier-glue". At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to CONFIG_RESET_UNIPHIER_GLUE. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-01-07reset: socfpga: add an early reset driver for SoCFPGADinh Nguyen1-1/+9
Create a separate reset driver that uses the reset operations in reset-simple. The reset driver for the SoCFPGA platform needs to register early in order to be able bring online timers that needed early in the kernel bootup. We do not need this early reset driver for Stratix10, because on arm64, Linux does not need the timers are that in reset. Linux is able to run just fine with the internal armv8 timer. Thus, we use a new binding "altr,stratix10-rst-mgr" for the Stratix10 platform. The Stratix10 platform will continue to use the reset-simple platform driver, while the 32-bit platforms(Cyclone5/Arria5/Arria10) will use the early reset driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [p.zabel@pengutronix.de: fixed socfpga of_device_id in reset-simple] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-10-05reset: qcom: PDC Global (Power Domain Controller) reset controllerSibi Sankar1-0/+9
Add reset controller for SDM845 SoCs to control reset signals provided by PDC Global for Modem, Compute, Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-20reset: meson: add meson audio arb driverJerome Brunet1-0/+7
The Amlogic Audio ARB is a simple device which enables or disables the access of Audio FIFOs to DDR on AXG based SoC. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: uniphier: add USB3 core reset controlKunihiko Hayashi1-0/+10
Add a reset line to enable USB3 core implemented in UniPhier SoCs. This reuses only the reset operations in reset-simple, because the reset-simple doesn't handle any SoC-dependent clocks and resets. This reset line is included in the USB3 glue layer, and it's necessary to enable clocks and deassert resets of the layer before using this reset line. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-07-16reset: qcom: AOSS (always on subsystem) reset controllerSibi Sankar1-0/+9
Add reset controller driver for Qualcomm SDM845 SoC to control reset signals provided by AOSS for Modem, Venus ADSP, GPU, Camera, Wireless, Display subsystem Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: stm32mp1: Enable stm32mp1 reset driverGabriel Fernandez1-0/+6
stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register. Writing '0' on reset SET register has no effect Writing '1' on reset SET register activates the reset of the corresponding peripheral Writing '0' on reset CLEAR register has no effect Writing '1' on reset CLEAR register releases the reset of the corresponding peripheral See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-03-27reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada1-0/+1
This config select's MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2018-02-20reset: simple: Enable for ASPEED systemsJoel Stanley1-3/+7
ASPEED BMC SoCs have a reset controller in the LPC IP that can be controlled using this driver to release the UARTs from reset. No special configuration is required, so only the compatible string is added. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-18Merge branch 'reset/arc' into reset/nextPhilipp Zabel1-0/+6
Merge the AXS10x driver, which is also merged into git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git for-next
2017-10-18reset: zx2967: use the reset-simple driverPhilipp Zabel1-8/+2
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-10-18reset: stm32: use the reset-simple driverPhilipp Zabel1-8/+3
The reset-simple driver can be used without changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Gabriel Fernandez <gabriel.fernandez@st.com>
2017-10-18reset: socfpga: use the reset-simple driverPhilipp Zabel1-8/+2
Add reset line status readback, inverted status support, and socfpga device tree quirks to the simple reset driver, and use it to replace the socfpga driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-10-17reset: sunxi: use reset-simple driverPhilipp Zabel1-0/+1
Use the newly created copies in the reset-simple driver to replace the sunxi platform driver code and reset operations. The separate sunxi driver still remains to register the early reset controllers, but it reuses the reset operations in reset-simple. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-10-17reset: add reset-simple to unify socfpga, stm32, sunxi, and zx2967Philipp Zabel1-0/+10
Copy reusable parts from the sunxi driver, to add a driver for simple reset controllers with reset lines that can be controlled by toggling bits in exclusive, contiguous register ranges using read-modify-write cycles under a spinlock. The following patches will replace compatible reset drivers with reset-simple, extending it where necessary. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Alexandru Gagniuc <alex.g@adaptrum.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
2017-10-04reset: socfpga: build the reset-socfpga for Stratix10 SOCDinh Nguyen1-1/+1
Enable the reset driver to get built for the Stratix10 platform. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-21reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TESTGeert Uytterhoeven1-1/+1
The HSDK reset driver is only useful when building for an ARC HSDK platform. While at it, drop the "default n", as that is the default. Fixes: e0be864f14240cb1 ("ARC: reset: introduce HSDKv1 reset driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [p.zabel@pengutronix.de: rebased, renamed RESET_HSDK_V1 to RESET_HSDK] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: introduce AXS10x reset driverEugeniy Paltsev1-0/+6
ARC AXS10x boards support custom IP-block which allows to control reset signals of selected peripherals. For example DW GMAC, etc... This block is controlled via memory-mapped register (AKA CREG) which represents up-to 32 reset lines. This regiter is self-clearing so we don't need to deassert line after reset. As of today only the following lines are used: - DW GMAC - line 5 Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: remove the misleading v1 suffix all overVineet Gupta1-3/+3
There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-18ARC: reset: Only build on archs that have IOMEMThomas Meyer1-0/+1
This avoids the error: drivers/reset/reset-hsdk-v1.o: In function `hsdkv1_reset_probe': /home/thomas/git/linux/drivers/reset/reset-hsdk-v1.c:101: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds1-0/+6
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-04reset: Add a reset controller driver for the Lantiq XWAY based SoCsMartin Blumenstingl1-0/+6
The reset controllers (on xRX200 and newer SoCs have two of them) are provided by the RCU module. This was initially implemented as a simple reset controller. However, the RCU module provides more functionality (ethernet GPHYs, USB PHY, etc.), which makes it a MFD device. The old reset controller driver implementation from arch/mips/lantiq/xway/reset.c did not honor this fact. For some devices the request and the status bits are different. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Cc: john@phrozen.org Cc: kishon@ti.com Cc: mark.rutland@arm.com Cc: linux-mips@linux-mips.org Cc: linux-mtd@lists.infradead.org Cc: linux-watchdog@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-spi@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/17125/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-07Revert "reset: Add a Gemini reset controller"Linus Walleij1-7/+0
This reverts commit 2acb037fc42b8ce5ae59a7d5db3c9b35672e3dd7. We ended up merging the reset controller into the clock controller so we can now get rid of this stand-alone implementation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-07-20ARC: reset: introduce HSDKv1 reset driverEugeniy Paltsev1-0/+6
The HSDK v1 periphery IPs can be reset by accessing some registers from the CGU block. The list of available reset lines is documented in the DT bindings. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-06-06reset: Add the TI SCI reset driverAndrew F. Davis1-0/+8
Some TI Keystone family of SoCs contain a system controller (like the Power Management Micro Controller (PMMC) on 66AK2G SoCs) that manage the low-level device control (like clocks, resets etc) for the various hardware modules present on the SoC. These device control operations are provided to the host processor OS through a communication protocol called the TI System Control Interface (TI SCI) protocol. This patch adds a reset driver that communicates to the system controller over the TI SCI protocol for performing reset management of various devices present on the SoC. Various reset functionalities are achieved by the means of different TI SCI device operations provided by the TI SCI framework. Signed-off-by: Andrew F. Davis <afd@ti.com> [s-anna@ti.com: documentation changes, revised commit message] Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> [p.zabel@pengutronix.de: const struct reset_control_ops] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-24reset: Add a Gemini reset controllerLinus Walleij1-0/+7
The Cortina Systems Gemini reset controller is a simple 32bit register with self-deasserting reset lines. It is accessed using regmap over syscon. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-05-24reset: ti_syscon: Rename TI_SYSCON_RESET to RESET_TI_SYSCONSuman Anna1-1/+1
Rename the current Kconfig name used for the TI SYSCON Reset driver from TI_SYSCON_RESET to RESET_TI_SYSCON to match the convention used for all the reset drivers present at the base reset folder. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15reset: Add Altera Arria10 SR Reset ControllerThor Thayer1-0/+7
This patch adds the reset controller functionality for Peripheral PHYs to the Arria10 System Resource Chip. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15reset: Add i.MX7 SRC reset driverAndrey Smirnov1-0/+7
Add reset controller driver exposing various reset faculties, implemented by System Reset Controller IP block. Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-01-20reset: zx2967: add reset controller driver for ZTE's zx2967 familyBaoyou Xie1-0/+6
This patch adds reset controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-11-18reset: Add Tegra BPMP reset driverThierry Reding1-0/+1
This driver uses the services provided by the BPMP firmware driver to implement a reset driver based on the MRQ_RESET request. Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-30reset: zynq: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: sunxi: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: stm32: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Gabriel Fernandez <gabriel.fernandez@st.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: socfpga: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-30reset: pistachio: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Damien Horsley <Damien.Horsley@imgtec.com> Acked-by: James Hartley <james.hartley@imgtec.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: meson: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: lpc18xx: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Acked-by: Joachim Eastwood <manabian@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-08-25reset: berlin: add driver Kconfig optionPhilipp Zabel1-0/+6
Visible only if COMPILE_TEST is enabled, this allows to include the driver in build tests. Cc: Antoine Tenart <antoine.tenart@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 09:35:19 +0000