summaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/ste_modem_rproc.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-02remoteproc/ste: add blank lines after declarationsSuman Anna1-2/+2
Fix couple of checkpatch warnings of the type, "WARNING: Missing a blank line after declarations" Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2015-03-12remoteproc: add IOMMU hardware capability flagSuman Anna1-0/+1
The remoteproc framework currently relies on iommu_present() on the bus the device is on, to perform MMU management. However, this logic doesn't scale for multi-arch, especially for processors that do not have an IOMMU. Replace this logic instead by using a h/w capability flag for the presence of IOMMU in the rproc structure. This issue is seen on OMAP platforms when trying to add a remoteproc driver for a small Cortex M3 called the WkupM3 used for suspend / resume management on TI AM335/AM437x SoCs. This processor does not have an MMU. Same is the case with another processor subsystem PRU-ICSS on AM335/AM437x. All these are platform devices, and the current iommu_present check will not scale for the same kernel image to support OMAP4/OMAP5 and AM335/AM437x. The existing platform implementation drivers - OMAP remoteproc, STE Modem remoteproc and DA8xx remoteproc, are updated as well to properly configure the newly added rproc field. Cc: Robert Tivy <rtivy@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suman Anna <s-anna@ti.com> [small change in the commit title and in a single comment] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2014-10-20remoteproc: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-02-24remoteproc/ste_modem: staticize local symbolsJingoo Han1-2/+2
These local symbols are used only in this file. Fix the following sparse warnings: drivers/remoteproc/ste_modem_rproc.c:167:27: warning: symbol 'sproc_fw_ops' was not declared. Should it be static? drivers/remoteproc/ste_modem_rproc.c:196:25: warning: symbol 'sproc_dev_cb' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> [standartize patch title] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-05-07Merge tag 'remoteproc-3.10' of ↵Linus Torvalds1-15/+30
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc update from Ohad Ben-Cohen: - Some refactoring, cleanups and small improvements from Sjur Brændeland. The improvements are mainly about better supporting varios virtio properties (such as virtio's config space, status and features). I now see that I messed up while commiting one of Sjur's patches and erroneously put myself as the author, as well as letting a nasty typo sneak in. I will not fix this in order to avoid rebasing the patches. Sjur - sorry! - A new remoteproc driver for OMAP-L13x (technically a DaVinci platform) from Robert Tivy. - Extend OMAP support to OMAP5 as well, from Vincent Stehlé. - Fix Kconfig VIRTUALIZATION dependency, from Suman Anna (a non-critical fix which arrived late during the rc cycle). * tag 'remoteproc-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: remoteproc: fix kconfig dependencies for VIRTIO remoteproc/davinci: add a remoteproc driver for OMAP-L13x DSP remoteproc: support default firmware name in rproc_alloc() remoteproc/omap: support OMAP5 too remoteproc: set vring addresses in resource table remoteproc: support virtio config space. remoteproc: perserve resource table data remoteproc: calculate max_notifyid by counting vrings remoteproc: code cleanup of resource parsing remoteproc: parse STE-firmware and find resource table address remoteproc: add find_loaded_rsc_table firmware ops remoteproc: refactor rproc_elf_find_rsc_table()
2013-04-07remoteproc: calculate max_notifyid by counting vringsSjur Brændeland1-1/+1
Simplify handling of max_notifyid by simply counting the number of vrings. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by: Ido Yariv <ido@wizery.com> [small terminology changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05remoteproc: parse STE-firmware and find resource table addressSjur Brændeland1-14/+29
Parse the STE firmware and scan the TOC-table to find the address of the loaded resource table. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> [rebase patch; update terminology] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2013-04-05remoteproc/ste: fix memory leak on shutdownDmitry Tarnyagin1-1/+6
Fixes coherent memory leakage, caused by non-deallocated firmware image chunk. Cc: stable@vger.kernel.org Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-by: Ido Yariv <ido@wizery.com> [slightly edit subject and commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-09-22remoteproc: Add STE modem driverSjur Brændeland1-0/+322
Add support for the STE modem shared memory driver. This driver hooks into the remoteproc framework in order to manage configuration and the virtio devices. This driver adds custom firmware handlers, because STE modem uses a custom firmware layout. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> cc: Linus Walleij <linus.walleij@linaro.org> cc: Alan Cox <alan@lxorguk.ukuu.org.uk> [ohad: validate mdev->ops, move setup() to probe/remove, trivial style changes] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>