summaryrefslogtreecommitdiffstats
path: root/drivers/remoteproc/qcom_adsp_pil.c
AgeCommit message (Collapse)AuthorFilesLines
2018-09-26remoteproc: qcom: Rename Hexagon v5 PAS driverBjorn Andersson1-386/+0
The Hexagon v5 ADSP driver is used for more than only the ADSP and there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to qcom_q6v5_pas in order to better suite this. Cc: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-06remoteproc: qcom: adsp: Add SDM845 ADSP and CDSP supportBjorn Andersson1-0/+12
Add support for booting the Audio and Compute DSPs found in Qualcomm's SDM845 platform. As with the previous platforms the power rail handling needs to be updated once the appropriate support lands upstream. Acked-by: Rob Herring <robh@kernel.org> Tested-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-18remoteproc: qcom: adsp: Use common q6v5 helpersBjorn Andersson1-129/+27
Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted helper functions. The use of the handover callback does introduce latent disabling of proxy resources. But apart from this there should be no change in functionality. Reviewed-by: Rohit kumar <rohitkr@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Rohit kumar <rohitkr@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Introduce sysmonBjorn Andersson1-0/+12
The sysmon client communicates either via a dedicated SMD/GLINK channel or via QMI encoded messages over IPCROUTER with remote processors in order to perform graceful shutdown and inform about other remote processors shutting down. Acked-By: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: qcom: Register segments for core dumpSarangdhar Joshi1-0/+1
Register MDT segments with the remoteproc core dump functionality in order to include them in a core dump, in case of a recovery of the remote processor. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12soc: qcom: mdt-loader: Return relocation baseBjorn Andersson1-1/+3
In order to implement support for grabbing core dumps in remoteproc it's necessary to know the relocated base of the image, as the offsets from the virtual memory base might not be based on the physical address. Return the adjusted physical base address to the caller. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-02-12remoteproc: Remove null character write of shared memJitendra Sharma1-3/+0
remoteproc is writing '\0' in the shared mem region. This region is shared among multiple clients that are also trying to read. Hence they miss first character. Remove this null character write, as this mem area is supposed to be Read only. Further during every subsystem reboot, this region is initialized with default, hence no need to write this region. Signed-off-by: Jitendra Sharma <shajit@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Drop dangling find_rsc_table dummiesBjorn Andersson1-1/+0
As the core now deals with the lack of a resource table, remove the dangling custom dummy implementations of find_rsc_table from drivers. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-01-15remoteproc: Merge rproc_ops and rproc_fw_opsBjorn Andersson1-7/+2
There are currently a few different schemes used for overriding fw_ops or parts of fw_ops. Merge fw_ops into rproc_ops and expose the default ELF-loader symbols so that they can be assigned by the drivers. To keep backwards compatibility with the "default" case, a driver not specifying the "load" operation is assumed to want the full ELF-loader suit of functions. Reviewed-By: Loic Pallardy <loic.pallardy@st.com> Tested-By: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-09-09Merge tag 'rpmsg-v4.14' of git://github.com/andersson/remoteprocLinus Torvalds1-0/+3
Pull rpmsg updates from Bjorn Andersson: "This extends the Qualcomm GLINK implementation to support the additional features used for communicating with modem and DSP coprocessors in modern Qualcomm platforms. In addition to this there's support for placing virtio RPMSG buffers in non-System RAM" * tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc: (29 commits) rpmsg: glink: initialize ret to zero to ensure error status check is correct rpmsg: glink: fix null pointer dereference on a null intent dt-bindings: soc: qcom: Extend GLINK to cover SMEM remoteproc: qcom: adsp: Allow defining GLINK edge rpmsg: glink: Export symbols from common code rpmsg: glink: Release idr lock before returning on error rpmsg: glink: Handle remote rx done command rpmsg: glink: Request for intents when unavailable rpmsg: glink: Use the intents passed by remote rpmsg: glink: Receive and store the remote intent buffers rpmsg: glink: Add announce_create ops and preallocate intents rpmsg: glink: Add rx done command rpmsg: glink: Make RX FIFO peak accessor to take an offset rpmsg: glink: Use the local intents when receiving data rpmsg: glink: Add support for TX intents rpmsg: glink: Fix idr_lock from mutex to spinlock rpmsg: glink: Add support for transport version negotiation rpmsg: glink: Introduce glink smem based transport rpmsg: glink: Do a mbox_free_channel in remove rpmsg: glink: Return -EAGAIN when there is no FIFO space ...
2017-09-01remoteproc: qcom: adsp: Allow defining GLINK edgeBjorn Andersson1-0/+3
Introduce the GLINK subdev, which allows the definition of a GLINK edge as child of a remoteproc. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-29remoteproc: qcom: Use PTR_ERR_OR_ZEROHimanshu Jha1-4/+1
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-08-02remoteproc: qcom: Add support for SSR notificationsBjorn Andersson1-0/+6
This adds the remoteproc part of subsystem restart, which is responsible for emitting notifications to other processors in the system about a dying remoteproc instance. These notifications are propagated to the various communication systems in the various remote processors to shut down communication links that was left in a dangling state as the remoteproc was stopped (or crashed). Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: Drop qcom_scm_pas_supported() from adsp_probe()Sarangdhar Joshi1-5/+0
SCM call to check whether Peripheral Authentication Service (PAS) is supported returns false for ADSP on MSM8996. Drop this call from the driver so that the probe() function succeeds for ADSP PIL device. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: Use common SMD edge handlerBjorn Andersson1-0/+6
Call the common SMD edge handler to instantiate subdevices to bring associated SMD edges up and down as the remoteproc is started and stopped. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: Move qcom_mdt_loader into drivers/soc/qcomBjorn Andersson1-1/+1
With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: mdt_loader: Refactor MDT loaderBjorn Andersson1-28/+2
Pushing the SCM calls into the MDT loader reduces duplication in the callers and allows for non-remoteproc clients to use the helper for parsing and loading MDT files. Cc: Andy Gross <andy.gross@linaro.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06remoteproc: qcom: Extract non-mdt related helperBjorn Andersson1-0/+1
In preparation for moving the mdt loader out of remoteproc let's move the somewhat unrelated resource table dummy helper to a Qualcomm "common" file. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc.Avaneesh Kumar Dwivedi1-1/+9
This patch add slpi remoteproc support in existing adsp rproc driver. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> [bjorn: documented aggre2 and px-supply] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30remoteproc: qcom: Add additional agree2_clk and px regulator resource.Avaneesh Kumar Dwivedi1-5/+38
This patch add additional clock and regulator resource which are initialized based on compatible and has no impact on existing driver working. This resourse addition enable the existing driver to handle. low pass sensor processor device also. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-30remoteproc: qcom: Compatible string based resource initialization.Avaneesh Kumar Dwivedi1-14/+33
This patch initialize certain driver related data based on compatible string. This enable driver to handle more than one similar device in by differentiating in probe their private data. Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-19remoteproc: Update last rproc_put users to rproc_freeBjorn Andersson1-2/+2
The transition from rproc_put to rproc_free raced with the review of the Qualcomm ADSP and ST SLIMproc drivers and these where not updated accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-19remoteproc: qcom: adsp: Add missing MODULE_DEVICE_TABLEBjorn Andersson1-0/+1
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-16remoteproc: Add support for xo clockSarangdhar Joshi1-1/+29
Add xo clock support required to boot up Qualcomm ADSP processor. The ADSP remoteproc driver keeps xo clock enabled until the driver receives "handover" irq, in order to allow ADSP processor to vote for xo clock with rpm. Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-11-15remoteproc: Introduce Qualcomm ADSP PILBjorn Andersson1-0/+399
The Qualcomm ADSP Peripheral Image Loader is used on a variety of different Qualcomm platforms for loading firmware into and controlling the Hexagon based ADSP. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-23 00:38:39 +0000