summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/virtual.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-20regulator: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-14drivers/regulator/virtual: avoid world-writable sysfs files.Rusty Russell1-5/+5
In line with practice for module parameters, we're adding a build-time check that sysfs files aren't world-writable. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-07-30regulator: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-12regulator: Remove all platform_set_drvdata(pdev, NULL) in driversAxel Lin1-2/+0
Since 0998d06310 "device-core: Ensure drvdata = NULL when no driver is bound", this is done by driver core after device_release or on probe failure. Thus we can remove all platform_set_drvdata(pdev, NULL) in drivers. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-19regulator: virtual: Replace strict_strtol with kstrtolAxel Lin1-4/+4
strict_strtol is deprecated and results in a checkpatch warning. Replace it with kstrtol. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-18regulator: virtual: Convert to use devm_* APIsAxel Lin1-13/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-28regulator: Convert virtual and userspace regulator consumer drivers to use ↵Axel Lin1-11/+1
module_platform_driver() This patch converts virtual and userspace regulator consumer drivers to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-31regulator: Add module.h to drivers/regulator users as requiredPaul Gortmaker1-0/+1
Another group of drivers that are taking advantage of the implicit presence of module.h -- and will break when we pull the carpet out from under them during a cleanup. Fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-03Regulators: virtual - use sysfs attribute groupsDmitry Torokhov1-31/+33
Instead of open-coding sysfs attribute group use canned solution. Also add __devinit/__devexit markups for probe and remove methods and use 'bool' where it makes sense. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Improve virtual consumer probe error handlingMark Brown1-4/+8
Report errors to the user and try harder to clean up if we're not able to probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Make virtual consumer a bit more chattyMark Brown1-0/+8
This makes it easier to read the logs when doing testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Make virtual consumer use dev_printkMark Brown1-16/+18
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-09-22regulator: Report regulator_get() failure in virtual consumerMark Brown1-0/+2
The core will no longer complain so we should log an error here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-06-15regulator: Set MODULE_ALIAS for regulator driversMark Brown1-0/+1
Several of the regulator drivers didn't have MODULE_ALIAS so couldn't be auto loaded. Add the MODULE_ALIAS in case they do get built as modules. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-04-28regulator/virtual: fix strings compare predicatesMike Rapoport1-4/+4
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: Mark attributes table for virtual regulator staticMark Brown1-1/+1
It's not exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: minor cleanup of virtual consumerAndrew Morton1-0/+4
On Thu, 15 Jan 2009 16:10:22 -0800 Andrew Morton <akpm@linux-foundation.org> wrote: > On Wed, 14 Jan 2009 13:16:27 -0800 > David Brownell <david-b@pacbell.net> wrote: > > > From: David Brownell <dbrownell@users.sourceforge.net> > > > > Minor cleanup to the regulator set_mode sysfs support: > > switch to sysfs_streq() in set_mode(), which is also > > a code shrink. Use the same strings that get_mode() > > uses, shrinking data too. > > > > Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> > > --- > > drivers/regulator/virtual.c | 8 ++++---- > > 1 file changed, 4 insertions(+), 4 deletions(-) > > > > --- a/drivers/regulator/virtual.c > > +++ b/drivers/regulator/virtual.c > > @@ -226,13 +226,13 @@ static ssize_t set_mode(struct device *d > > unsigned int mode; > > int ret; > > > > - if (strncmp(buf, "fast", strlen("fast")) == 0) > > + if (sysfs_streq(buf, "fast\n") == 0) > > mode = REGULATOR_MODE_FAST; > > - else if (strncmp(buf, "normal", strlen("normal")) == 0) > > + else if (sysfs_streq(buf, "normal\n") == 0) > > mode = REGULATOR_MODE_NORMAL; > > - else if (strncmp(buf, "idle", strlen("idle")) == 0) > > + else if (sysfs_streq(buf, "idle\n") == 0) > > mode = REGULATOR_MODE_IDLE; > > - else if (strncmp(buf, "standby", strlen("standby")) == 0) > > + else if (sysfs_streq(buf, "standby\n") == 0) > > mode = REGULATOR_MODE_STANDBY; > > we don't need the \n's, do we? oh, it's for the string sharing. Sneaky. I wonder how many people will try to fix that up for us? Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-03-31regulator: minor cleanup of virtual consumerDavid Brownell1-4/+4
Minor cleanup to the regulator set_mode sysfs support: switch to sysfs_streq() in set_mode(), which is also a code shrink. Use the same strings that get_mode() uses, shrinking data too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-07-30regulator: regulator test harnessMark Brown1-0/+345
This provides a virtual regulator test harness which exposes a sysfs interface for setting power requirements, intended for test purposes only. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>