summaryrefslogtreecommitdiffstats
path: root/drivers/regulator/fan53555.c
AgeCommit message (Collapse)AuthorFilesLines
2014-09-18regulator: fan53555: Fix null pointer dereferenceAxel Lin1-1/+1
Set di->regulator before dereference it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-18regulator: fan53555: Fixup report wrong vendor messageAxel Lin1-2/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-17regulator: fan53555: fix wrong cast in probeHeiko Stübner1-1/+1
The vendor-id gathered from the dt match-data was cast to int but assigned to an unsigned long, producing warnings on at least sparc, like drivers/regulator/fan53555.c: In function 'fan53555_regulator_probe': >> drivers/regulator/fan53555.c:373:16: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] di->vendor = (int) match->data; Fix this by using an appropriate cast. Reported-by: kbuild test robot Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-16regulator: fan53555: add support for Silergy SYR82x regulatorsHeiko Stuebner1-15/+87
Silergy SYR82x regulators share the exact same functionality and register layout as the Fairchild FAN53555 regulators. Therefore extend the driver to add support for them. Both types use the same vendor id in their ID1 register, so it's not possible to distinguish them automatically. Similarly, the types also do not match. Type 8 used by the SYR827 and SYR828 start at 712.5mV and increment in 12.5mv steps, while the FAN53555 type 8 starts at 600mV and increments in 10mV steps. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-16regulator: fan53555: add devicetree supportHeiko Stuebner1-4/+46
Add the ability to parse regulator-data from the devicetree. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-16regulator: fan53555: use set_ramp_delay to set the ramp up slew rateHeiko Stuebner1-11/+42
The regulator constraints already provide a field for the ramp_delay, so there is no need to set this manually. Therefore implement the set_ramp_delay callback and convert the pdata value to the constraint value if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-15regulator: fan53555: enable vin supplyHeiko Stuebner1-0/+1
The regulator can be supplied by a parent regulator through its vin pin, so add the supply_name for it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-02-20regulator: fan53555: Remove redundant error messageSachin Kamat1-3/+2
kzalloc prints its own OOM message upon failure. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20regulator: fan53555: Do not hardcode return valuesSachin Kamat1-4/+4
Propagate the error values returned by the function instead. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17regulator: fan53555: Convert to devm_regulator_registerAxel Lin1-11/+1
Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-07-30regulator: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell1-1/+1
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-20regulator: fan53555: Use PTR_RET functionAlexandru Gheorghiu1-3/+1
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20regulator: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10regulator: fan53555: remove vsel_max not usedYunfan Zhang1-3/+0
The max voltage will be bounded by min_uV, uV_step and n_voltages, so remove it to avoid confusing. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Reviewed-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-10regulator: Fairchild fan53555 supportYunfan Zhang1-0/+325
This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. Signed-off-by: Yunfan Zhang <yfzhang@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:13:43 +0000