summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/pwm-bcm2835.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-17pwm: bcm2835: Support apply function for atomic configurationLino Sanfilippo1-45/+24
Use the newer .apply function of pwm_ops instead of .config, .enable, .disable and .set_polarity. This guarantees atomic changes of the pwm controller configuration. It also reduces the size of the driver. Since now period is a 64 bit value, add an extra check to reject periods that exceed the possible max value for the 32 bit register. This has been tested on a Raspberry PI 4. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: bcm2835: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: bcm2835: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: bcm2835: Dynamically allocate baseFlorian Fainelli1-0/+1
The newer 2711 and 7211 chips have two PWM controllers and failure to dynamically allocate the PWM base would prevent the second PWM controller instance being probed for succeeding with an -EEXIST error from alloc_pwms(). Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Suppress error message during deferred probeStefan Wahren1-2/+5
This suppresses error messages in case the PWM clock isn't ready yet. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Fix period_ns range checkStefan Wahren1-4/+5
The range check for period_ns was written under assumption of a fixed PWM clock. With clk-bcm2835 driver the PWM clock is a dynamic one. So fix this by doing the range check on the period register value. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-09-21pwm: bcm2835: Suppress error message for invalid period_nsStefan Wahren1-4/+1
The PWM config can be triggered via sysfs, so we better suppress the error message in case of an invalid period to avoid kernel log spamming. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: bcm2835: Improve precision of PWMSean Young1-3/+5
If sending IR with carrier of 455kHz using the pwm-ir-tx driver, the carrier ends up being 476kHz. The clock is set to bcm2835-pwm with a rate of 10MHz. A carrier of 455kHz has a period of 2198ns, but the arithmetic truncates this to 2100ns rather than 2200ns. So, use DIV_ROUND_CLOSEST() to reduce rounding errors, and we have a much more accurate carrier of 454.5kHz. Reported-by: Andreas Christ <andreas@christ-faesch.ch> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2018-12-24pwm: bcm2835: Switch to SPDX identifierStefan Wahren1-4/+1
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Bart Tanghe <bart.tanghe@thomasmore.be> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-08-21pwm: bcm2835: Support for polarity setting via DTStefan Wahren1-0/+2
This adds support for the third (optional) pwm cell to specify the polarity, which is needed by display backlights for example. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: bcm2835: Fix email address specificationStefan Wahren1-1/+1
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: bcm2835: Prevent division by zeroStefan Wahren1-1/+9
It's possible that the PWM clock becomes an orphan. So better check the result of clk_get_rate() in order to prevent a division by zero. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16pwm: bcm2835: Calculate scaler in ->config()Stefan Wahren1-5/+3
Currently pwm-bcm2835 assumes a fixed clock rate and stores the resulting scaler in the driver structure. But with the upcoming PWM clock support for clk-bcm2835 the rate could change, so calculate the scaler in the ->config() callback. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-11-17pwm: Add BCM2835 PWM driverBart Tanghe1-0/+205
Add PWM driver for Broadcom BCM2835 processor (Raspberry Pi) Signed-off-by: Bart Tanghe <bart.tanghe@thomasmore.be> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-03 13:37:32 +0000