summaryrefslogtreecommitdiffstats
path: root/drivers/pwm/core.c
AgeCommit message (Collapse)AuthorFilesLines
2017-07-06pwm: Silently error out on EPROBE_DEFERJerome Brunet1-1/+3
In of_pwm_get(), if we fail to get the PWM chip due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Try to load modules during pwm_get()Hans de Goede1-0/+14
Add a module name string to the pwm_lookup struct and if specified try to load the module using request_module() if pwmchip_find_by_name() is unable to find the PWM chip. This is a last resort to work around drivers that can't - and can't be made to - deal with deferred probe. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [thierry.reding@gmail.com: rename new macro, reword commit message] [thierry.reding@gmail.com: add comment explaining use-case] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Don't hold pwm_lookup_lock longer than necessaryHans de Goede1-10/+8
There is no need to hold pwm_lookup_lock after we're done with looping over pwm_lookup_list, so release it earlier. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Make the PWM_POLARITY flag in DTB optionalLothar Wassmann1-10/+12
Change the PWM chip driver registration so that a chip driver that supports polarity inversion can still be used with DTBs that don't provide the polarity flag as part of the specifier. This is done to provide polarity inversion support for the pwm-imx driver without having to modify all existing DTS files. Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-30pwm: Print error messages with pr_err() instead of pr_debug()Lothar Wassmann1-2/+2
Make the messages that are printed in case of fatal errors actually visible to the user without having to recompile the driver with debugging enabled. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2017-01-04pwm: Remove pwm_can_sleep()Thierry Reding1-12/+0
The last user of this function has been removed, so it is no longer needed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-09-05pwm: Unexport children before chip removalDavid Hsu1-0/+2
Exported pwm channels aren't removed before the pwmchip and are leaked. This results in invalid sysfs files. This fix removes all exported pwm channels before chip removal. Signed-off-by: David Hsu <davidhsu@google.com> Fixes: 76abbdde2d95 ("pwm: Add sysfs interface") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-07-25Merge branch 'for-4.8/capture' into for-nextThierry Reding1-0/+27
2016-06-10pwm: Add PWM capture supportLee Jones1-0/+27
Supply a PWM capture callback op in order to pass back information obtained by running analysis on a PWM signal. This would normally (at least during testing) be called from the sysfs routines with a view to printing out PWM capture data which has been encoded into a string. Signed-off-by: Lee Jones <lee.jones@linaro.org> [thierry.reding@gmail.com: make capture data unsigned int for symmetry] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-06-10pwm: Improve args checking in pwm_apply_state()Brian Norris1-1/+2
It seems like in the process of refactoring pwm_config() to utilize the newly-introduced pwm_apply_state() API, some args/bounds checking was dropped. In particular, I noted that we are now allowing invalid period selections, e.g.: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle [... driver may or may not reject the value, or trigger some logic bug ...] It's better to see: # echo 1 > /sys/class/pwm/pwmchip0/export # cat /sys/class/pwm/pwmchip0/pwm1/period 100 # echo 101 > /sys/class/pwm/pwmchip0/pwm1/duty_cycle -bash: echo: write error: Invalid argument This patch reintroduces some bounds checks in both pwm_config() (for its signed parameters; we don't want to convert negative values into large unsigned values) and in pwm_apply_state() (which fix the above described behavior, as well as other potential API misuses). Fixes: 5ec803edcb70 ("pwm: Add core infrastructure to allow atomic updates") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17Merge branch 'for-4.7/pwm-atomic' into for-nextThierry Reding1-90/+132
2016-05-17Merge branch 'for-4.7/pwm-args' into for-nextThierry Reding1-6/+20
2016-05-17pwm: Add information about polarity, duty cycle and period to debugfsHeiko Stübner1-0/+5
The PWM states make it possible to also output the polarity, duty cycle and period information in the debugfs summary output. This simplifies gathering information about PWMs without needing to walk through the sysfs attributes of every PWM. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [thierry.reding@gmail.com: use more spaces in debugfs output] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Switch to the atomic APIBoris Brezillon1-1/+4
Replace legacy pwm_get/set_xxx() and pwm_config/enable/disable() calls by pwm_get/apply_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Add core infrastructure to allow atomic updatesBoris Brezillon1-68/+119
Add an ->apply() method to the pwm_ops struct to allow PWM drivers to implement atomic updates. This method is preferred over the ->enable(), ->disable() and ->config() methods if available. Add the pwm_apply_state() function to the PWM user API. Note that the pwm_apply_state() does not guarantee the atomicity of the update operation, it all depends on the availability and implementation of the ->apply() method. pwm_enable/disable/set_polarity/config() are now implemented as wrappers around the pwm_apply_state() function. pwm_adjust_config() is allowing smooth handover between the bootloader and the kernel. This function tries to adapt the current PWM state to the PWM arguments coming from a PWM lookup table or a DT definition without changing the duty_cycle/period proportion. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [thierry.reding@gmail.com: fix a couple of typos] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Add hardware readout infrastructureBoris Brezillon1-0/+3
Add a ->get_state() function to the pwm_ops struct to let PWM drivers initialize the PWM state attached to a PWM device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Move the enabled/disabled info into pwm_stateBoris Brezillon1-4/+9
Prepare the transition to PWM atomic update by moving the enabled and disabled state into the pwm_state struct. This way we can easily update the whole PWM state by copying the new state in the ->state field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Introduce the pwm_state conceptBoris Brezillon1-4/+4
The PWM state, represented by its period, duty_cycle and polarity is currently directly stored in the PWM device. Declare a pwm_state structure embedding those field so that we can later use this struct to atomically update all the PWM parameters at once. All pwm_get_xxx() helpers are now implemented as wrappers around pwm_get_state(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Keep PWM state in sync with hardware stateBoris Brezillon1-14/+0
Before the introduction of pwm_args, the core was resetting the PWM period and polarity states to the reference values (those provided through the DT, a PWM lookup table or hardcoded in the driver). Now that all PWM users are correctly using pwm_args to configure their PWM device, we can safely remove the pwm_apply_args() call in pwm_get() and of_pwm_get(). We can also get rid of the pwm_set_period() call in pwm_apply_args(), because PWM users are now directly using pargs->period instead of pwm_get_period(). By doing that we avoid messing with the current PWM period. The only remaining bit in pwm_apply_args() is the initial polarity setting, and it should go away when all PWM users have been patched to use the atomic API (with this API the polarity will be set along with other PWM arguments when configuring the PWM). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Get rid of pwm->lockBoris BREZILLON1-15/+4
PWM devices are not protected against concurrent accesses. The lock in struct pwm_device might let PWM users think it is, but it's actually only protecting the enabled state. Removing this lock should be fine as long as all PWM users are aware that accesses to the PWM device have to be serialized, which seems to be the case for all of them except the sysfs interface. Patch the sysfs code by adding a lock to the pwm_export struct and making sure it's taken for all relevant accesses to the exported PWM device. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-17pwm: Fix pwm_apply_args() call sitesBoris Brezillon1-10/+17
pwm_apply_args() is supposed to initialize a PWM device according to the arguments provided by the DT or the PWM lookup, but this function was called inside pwm_device_request(), which in turn was called before the core had a chance to initialize the pwm->args fields. Fix that by calling pwm_apply_args directly in pwm_get() and of_pwm_get() after initializing pwm->args field. This commit also fixes an invalid pointer dereference introduced by commit e39c0df1be5a ("pwm: Introduce the pwm_args concept"). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: e39c0df1be5a ("pwm: Introduce the pwm_args concept") Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-03pwm: Use kcalloc() instead of kzalloc()Thierry Reding1-1/+1
kcalloc() should be preferred for allocations of arrays over kzalloc() with multiplication. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-03pwm: Add missing newlineThierry Reding1-0/+1
checkpatch requires that declarations be separated from code by a blank line. Add one for readability and to silence the warning. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-05-03pwm: Introduce the pwm_args conceptBoris Brezillon1-7/+14
Currently the PWM core mixes the current PWM state with the per-platform reference config (specified through the PWM lookup table, DT definition or directly hardcoded in PWM drivers). Create a struct pwm_args to store this reference configuration, so that PWM users can differentiate between the current and reference configurations. Patch all places where pwm->args should be initialized. We keep the pwm_set_polarity/period() calls until all PWM users are patched to use pwm_args instead of pwm_get_period/polarity(). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [thierry.reding@gmail.com: reword kerneldoc comments] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2016-01-21pwm: Mark all devices as "might sleep"Thierry Reding1-1/+1
Commit d1cd21427747 ("pwm: Set enable state properly on failed call to enable") introduced a mutex that is needed to protect internal state of PWM devices. Since that mutex is acquired in pwm_set_polarity() and in pwm_enable() and might potentially block, all PWM devices effectively become "might sleep". It's rather pointless to keep the .can_sleep field around, but given that there are external users let's postpone the removal for the next release cycle. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: Return -ENODEV if no PWM lookup match is foundThierry Reding1-1/+3
When looking up a PWM using the lookup table, assume that all entries will have been added already, so failure to find a match means that no corresponding entry has been registered. This fixes an issue where -EPROBE_DEFER would be returned if the PWM lookup table is empty. After this fix, -EPROBE_DEFER is reserved for situations where no provider has yet registered for a matching entry. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-11-10pwm: Set enable state properly on failed call to enableJonathan Richardson1-7/+26
The pwm_enable() function didn't clear the enabled bit if a call to the driver's ->enable() callback returned an error. The result was that the state of the PWM core was wrong. Clearing the bit when enable returns an error ensures the state is properly set. Tested-by: Jonathan Richardson <jonathar@broadcom.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> [thierry.reding@gmail.com: add missing kerneldoc for the lock] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-17pwm: Clean up kerneldocThierry Reding1-6/+38
Clean up kerneldoc in preparation for including the PWM documentation in DocBook. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-08-17pwm: Remove useless whitespaceThierry Reding1-1/+0
Remove useless tabs used for padding in structure definitions as well as some blank lines. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-07-20pwm: Add the pwm_is_enabled() helperBoris Brezillon1-2/+2
Some PWM drivers are testing the PWMF_ENABLED flag. Create a helper function to hide the logic behind enabled test. This will allow us to smoothly move from the current approach to an atomic PWM update approach. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-06-12pwm: Add pwmchip_add_with_polarity() APITim Kryger1-3/+20
Add a new function to register a PWM chip with channels that have their initial polarity as specified by an additional parameter. This benefits drivers of controllers that by default operate with inversed polarity by removing the need to modify the polarity during initialization. Signed-off-by: Tim Kryger <tim.kryger@gmail.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> [thierry.reding@gmail.com: export pwmchip_add_with_polarity()] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-05-06pwm: Add support to remove registered consumer lookup tablesShobhit Kumar1-0/+17
In case some drivers are unloading, they can remove lookup tables which they had registered during their load time to avoid redundant entries if loaded again. CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-04-23pwm: Remove __init initializer for pwm_add_table()Shobhit Kumar1-1/+1
For platforms that don't support DT, some early MFD modules can register lookup tables. Remove the __init annotation so that this works. This is similar to gpio_add_lookup_table() which allows late additions. CC: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-02-03pwm: Remove unnecessary check before of_node_put()Markus Elfring1-1/+1
The of_node_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-29pwm: Fix uninitialized warnings in pwm_get()Geert Uytterhoeven1-15/+14
With some versions of gcc (e.g. 4.1.2): drivers/pwm/core.c: In function ‘pwm_get’: drivers/pwm/core.c:610: warning: ‘polarity’ may be used uninitialized in this function drivers/pwm/core.c:609: warning: ‘period’ may be used uninitialized in this function While these are false positives, we can get rid of them by refactoring the code to store a pointer to the best match, as suggested before by Thierry Reding. This does require moving the mutex_unlock() down. Fixes: d717ea73e36dd565 ("pwm: Fix period and polarity in pwm_get() for non-perfect matches") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-25pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.Xiubo Li1-1/+1
Since we cannot make sure the 'chip->npwm' will always be none zero here, and then if either equal to zero, the kzalloc() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kzalloc(). Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-08-18pwm: Fix period and polarity in pwm_get() for non-perfect matchesGeert Uytterhoeven1-2/+6
If pwm_get() finds a look-up entry with a perfect match (both dev_id and con_id match), the loop is aborted, and "p" still points to the correct struct pwm_lookup. If only an entry with a matching dev_id or con_id is found, the loop terminates after traversing the whole list, and "p" now points to arbitrary memory, not part of the pwm_lookup list. Then pwm_set_period() and pwm_set_polarity() will set random values for period resp. polarity. To fix this, save period and polarity when finding a new best match, just like is done for chip (for the provider) and index. This fixes the LCD backlight on r8a7740/armadillo-legacy, which was fed period 0 and polarity -1068821144 instead of 33333 resp. 1. Fixes: 3796ce1d4d4b ("pwm: add period and polarity to struct pwm_lookup") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21pwm: add period and polarity to struct pwm_lookupAlexandre Belloni1-1/+7
Add period and polarity members to struct pwm_lookup so that platforms using the lookup table can be treated the same way as those using the device tree. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-20pwm: use seq_puts() instead of seq_printf()Jingoo Han1-3/+3
For a constant format without additional arguments, use seq_puts() instead of seq_printf(). Also, the following checkpatch warning is fixed. WARNING: Prefer seq_puts to seq_printf Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: Use the DT macro directly when parsing PWM DT flagsLaurent Pinchart1-4/+3
Don't redefine a PWM_SPEC_POLARITY macro with a value identical to PWM_POLARITY_INVERTED, use the PWM DT macro directly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add sysfs interfaceH Hartley Sweeten1-2/+23
Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-10pwm: devm: alloc correct pointer sizeWolfram Sang1-2/+2
The allocated object should be the size of what the pointer is pointing to and not the size of the pointer itself. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-02-26Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds1-0/+14
Pull PWM changes from Thierry Reding: "A new driver has been added to support the PWM mode of the timer counter blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained suspend and resume functionality. User drivers can now query the core for whether access to a PWM device will sleep (if the PWM chip is on a slow bus such as I2C or SPI). The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state in addition to the FB layer's blanking states. To round things off, a few fixes and cleanups are also included" * tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: twl: Use to_twl() instead of container_of() pwm: tegra: assume CONFIG_OF pwm_backlight: Validate dft_brightness in main probe function pwm: Export pwm_{set,get}_chip_data() pwm: Make Kconfig entries more consistent pwm: Add can_sleep property to drivers pwm: Add pwm_can_sleep() as exported API to users pwm-backlight: handle BL_CORE_FBBLANK state pwm: pwm-tiecap: Low power sleep support pwm: pwm-tiehrpwm: Low power sleep support pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver pwm: vt8500: Add polarity support pwm: vt8500: Register write busy test performed incorrectly pwm: atmel: add Timer Counter Block PWM driver
2013-02-01pwm: Add devm_of_pwm_get() as exported API for usersPeter Ujfalusi1-0/+30
When booted with DT users can use devm version of of_pwm_get() to benefit from automatic resource release. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-02-01pwm: core: Rename of_pwm_request() to of_pwm_get() and export itPeter Ujfalusi1-4/+4
Allow client driver to use of_pwm_get() to get the PWM they need. This is needed for drivers which handle more than one PWM separately, like leds-pwm driver, which have: pwmleds { compatible = "pwm-leds"; kpad { label = "omap4::keypad"; pwms = <&twl_pwm 0 7812500>; max-brightness = <127>; }; charging { label = "omap4:green:chrg"; pwms = <&twl_pwmled 0 7812500>; max-brightness = <255>; }; }; in the dts files. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2013-01-30pwm: Export pwm_{set,get}_chip_data()Thierry Reding1-0/+2
When building a driver as a module, these functions need to be exported for linking to succeed. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2013-01-30pwm: Add pwm_can_sleep() as exported API to usersFlorian Vaussard1-0/+12
Calls to some external PWM chips can sleep. To help users, add pwm_can_sleep() API. Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-12-06pwm: Export of_pwm_xlate_with_flags()Thierry Reding1-0/+1
Drivers may want to use this function if they support any of the flags that can be passed via a third cell in the DT specifier. Since those drivers may be built as modules the symbol needs to be exported to make sure that it can be accessed. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-11-22pwm: Device tree support for PWM polarityPhilip, Avinash1-0/+28
Add support for encoding PWM properties in bit encoded form with of_pwm_xlate_with_flags() function support. Platforms require platform specific PWM properties has to populate in 3rd cell of the pwm-specifier and PWM driver should also set .of_xlate support with this function. Currently PWM property polarity encoded in bit position 0 of the third cell in pwm-specifier. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-10-05pwm: Check for negative duty-cycle and periodThierry Reding1-1/+1
Make sure the duty-cycle and period passed in are not negative. This should eventually be made implicit by making them unsigned. While at it, the drivers' .config() implementations can have the equivalent checks removed. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Axel Lin <axel.lin@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: "Philip, Avinash" <avinashphilip@ti.com> Cc: Vaibhav Bedia <vaibhav.bedia@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com>