summaryrefslogtreecommitdiffstats
path: root/drivers/ptp
AgeCommit message (Collapse)AuthorFilesLines
2020-03-30ptp: Avoid deadlocks in the programmable pin code.Richard Cochran2-2/+24
The PTP Hardware Clock (PHC) subsystem offers an API for configuring programmable pins. User space sets or gets the settings using ioctls, and drivers verify dialed settings via a callback. Drivers may also query pin settings by calling the ptp_find_pin() method. Although the core subsystem protects concurrent access to the pin settings, the implementation places illogical restrictions on how drivers may call ptp_find_pin(). When enabling an auxiliary function via the .enable(on=1) callback, drivers may invoke the pin finding method, but when disabling with .enable(on=0) drivers are not permitted to do so. With the exception of the mv88e6xxx, all of the PHC drivers do respect this restriction, but still the locking pattern is both confusing and unnecessary. This patch changes the locking implementation to allow PHC drivers to freely call ptp_find_pin() from their .enable() and .verify() callbacks. V2 ChangeLog: - fixed spelling in the kernel doc - add Vladimir's tested by tag Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reported-by: Yangbo Lu <yangbo.lu@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-05ptp: add VMware virtual PTP clock driverVivek Thampi3-0/+157
Add a PTP clock driver called ptp_vmw, for guests running on VMware ESXi hypervisor. The driver attaches to a VMware virtual device called "precision clock" that provides a mechanism for querying host system time. Similar to existing virtual PTP clock drivers (e.g. ptp_kvm), ptp_vmw utilizes the kernel's PTP hardware clock API to implement a clock device that can be used as a reference in Chrony for synchronizing guest time with host. The driver is only applicable to x86 guests running in VMware virtual machines with precision clock virtual device present. It uses a VMware specific hypercall mechanism to read time from the device. Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Vivek Thampi <vithampi@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24ptp: Add a ptp clock driver for IDT 82P33 SMU.Min Li4-0/+1192
The IDT 82P33 Synchronization Management Unit (SMU) family provides tools to manage timing references, clock sources and timing paths for IEEE 1588 / Precision Time Protocol (PTP) and Synchronous Ethernet (SyncE) based clocks. The device supports up to three independent timing paths that control: PTP clock synthesis; SyncE clock generation; and general purpose frequency translation. The device supports physical layer timing with Digital PLLs (DPLLs) and it supports packet based timing with Digitally Controlled Oscillators (DCOs). This patch adds support for ptp clock based on the device. Changes since v1: - As suggested by Richard Cochran: 1. Replace _mask_bit_count with the existing hweight8 2. Prefix all functions with idt82p33 3. Fix white space issues in Kconfig and Makefile 4. Remove forward declaration 5. Use adjfine instead of adjfreq for better resolution - As suggested by David Miller: 1. Replace CHAN_INIT macro with a static function idt82p33_channel_init 2. Employ reverse christmas tree ordering for local variables 3. Fix indentation problem by appropriate number of TAB then SPACE character Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-16ptp_qoriq: drop the code of alarmYangbo Lu1-28/+1
The alarm function hadn't been supported by PTP clock driver. The recommended solution PHC + phc2sys + nanosleep provides best performance. So drop the code of alarm in ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
2020-01-14ptp: free ptp device pin descriptors properlyVladis Dronov1-2/+2
There is a bug in ptp_clock_unregister(), where ptp_cleanup_pin_groups() first frees ptp->pin_{,dev_}attr, but then posix_clock_unregister() needs them to destroy a related sysfs device. These functions can not be just swapped, as posix_clock_unregister() frees ptp which is needed in the ptp_cleanup_pin_groups(). Fix this by calling ptp_cleanup_pin_groups() in ptp_clock_release(), right before ptp is freed. This makes this patch fix an UAF bug in a patch which fixes an UAF bug. Reported-by: Antti Laakso <antti.laakso@intel.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Link: https://lore.kernel.org/netdev/3d2bd09735dbdaf003585ca376b7c1e5b69a19bd.camel@intel.com/ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-12ptp: ixp46x: move adjacent to ethernet driverArnd Bergmann3-344/+1
The ixp46x ptp driver has a somewhat unusual setup, where the ptp driver and the ethernet driver are in different directories but access the same registers that are defined a platform specific header file. Moving everything into drivers/net/ makes it look more like most other ptp drivers and allows compile-testing this driver on other targets. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-07ptp: clockmatrix: Rework clockmatrix version information.Vincent Cheng2-64/+15
Simplify and fix the version information displayed by the driver. The new info better relects what is needed to support the hardware. Prev: Version: 4.8.0, Pipeline 22169 0x4001, Rev 0, Bond 5, CSR 311, IRQ 2 New: Version: 4.8.0, Id: 0x4001 Hw Rev: 5 OTP Config Select: 15 - Remove pipeline, CSR and IRQ because version x.y.z already incorporates this information. - Remove bond number because it is not used. - Remove rev number because register was not implemented, always 0 - Add HW Rev ID register to replace rev number - Add OTP config select to show the user configuration chosen by the configurable GPIO pins on start-up Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-02ptp: ptp_clockmatrix: constify copied structureJulia Lawall1-1/+1
The idtcm_caps structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-18/+15
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: introduce ptp_cancel_worker_syncVladimir Oltean1-0/+6
In order to effectively use the PTP kernel thread for tasks such as timestamping packets, allow the user control over stopping it, which is needed e.g. when the timestamping queues must be drained. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov2-18/+15
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-25ptp: Add a driver for InES time stamping IP core.Richard Cochran3-0/+863
The InES at the ZHAW offers a PTP time stamping IP core. The FPGA logic recognizes and time stamps PTP frames on the MII bus. This patch adds a driver for the core along with a device tree binding to allow hooking the driver to MII buses. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16ptp_qoriq: export extts_clean_up() functionYangbo Lu1-2/+2
Export extts_clean_up() function so that dpaa2-ptp driver is able to reuse it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-16ptp_qoriq: check valid status before reading extts fifoYangbo Lu1-3/+8
For PTP timer supporting external trigger timestamp FIFO, there is a valid bit in TMR_STAT register indicating the timestamp is available. For PTP timer without FIFO, there is not TMR_STAT register. This patch is to check the valid bit for the FIFO before reading timestamp, and to avoid operating TMR_STAT register for PTP timer without the FIFO. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-13ptp: clockmatrix: add I2C dependencyArnd Bergmann1-1/+1
Without I2C, we get a link failure: drivers/ptp/ptp_clockmatrix.o: In function `idtcm_xfer.isra.3': ptp_clockmatrix.c:(.text+0xcc): undefined reference to `i2c_transfer' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_init': ptp_clockmatrix.c:(.init.text+0x14): undefined reference to `i2c_register_driver' drivers/ptp/ptp_clockmatrix.o: In function `idtcm_driver_exit': ptp_clockmatrix.c:(.exit.text+0x10): undefined reference to `i2c_del_driver' Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-5/+15
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15ptp: Introduce strict checking of external time stamp options.Richard Cochran1-0/+2
User space may request time stamps on rising edges, falling edges, or both. However, the particular mode may or may not be supported in the hardware or in the driver. This patch adds a "strict" flag that tells drivers to ensure that the requested mode will be honored. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15ptp: Validate requests to enable time stamping of external signals.Richard Cochran1-5/+13
Commit 415606588c61 ("PTP: introduce new versions of IOCTLs") introduced a new external time stamp ioctl that validates the flags. This patch extends the validation to ensure that at least one rising or falling edge flag is set when enabling external time stamps. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12ptp: ptp_clockmatrix: Fix build errorYueHaibing1-1/+1
When do randbuilding, we got this warning: WARNING: unmet direct dependencies detected for PTP_1588_CLOCK Depends on [n]: NET [=y] && POSIX_TIMERS [=n] Selected by [y]: - PTP_1588_CLOCK_IDTCM [=y] Make PTP_1588_CLOCK_IDTCM depends on PTP_1588_CLOCK to fix this. Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06ptp: ptp_clockmatrix: Fix missing unlock on error in idtcm_probe()Wei Yongjun1-1/+3
Add the missing unlock before return from function idtcm_probe() in the error handling case. Fixes: 3a6ba7dc7799 ("ptp: Add a ptp clock driver for IDT ClockMatrix.") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-03ptp: Add a ptp clock driver for IDT ClockMatrix.Vincent Cheng5-0/+2201
The IDT ClockMatrix (TM) family includes integrated devices that provide eight PLL channels. Each PLL channel can be independently configured as a frequency synthesizer, jitter attenuator, digitally controlled oscillator (DCO), or a digital phase lock loop (DPLL). Typically these devices are used as timing references and clock sources for PTP applications. This patch adds support for the device. Co-developed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Vincent Cheng <vincent.cheng.xh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-10ptp: ptp_dte: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-07ptp: fix typo of "mechanism" in Kconfig help textAntonio Borneo1-2/+2
Fix typo s/mechansim/mechanism/ Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-02ptp_qoriq: Initialize the registers' spinlock before calling ptp_qoriq_settimeVladimir Oltean1-1/+2
Because ptp_qoriq_settime is being called prior to spin_lock_init, the following stack trace can be seen at driver probe time: [ 2.269117] the code is fine but needs lockdep annotation. [ 2.274569] turning off the locking correctness validator. [ 2.280027] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc7-01478-g01eaa67a4797 #263 [ 2.288073] Hardware name: Freescale LS1021A [ 2.292337] [<c0313cb4>] (unwind_backtrace) from [<c030e11c>] (show_stack+0x10/0x14) [ 2.300045] [<c030e11c>] (show_stack) from [<c1219440>] (dump_stack+0xcc/0xf8) [ 2.307235] [<c1219440>] (dump_stack) from [<c03b9b44>] (register_lock_class+0x730/0x73c) [ 2.315372] [<c03b9b44>] (register_lock_class) from [<c03b6190>] (__lock_acquire+0x78/0x270c) [ 2.323856] [<c03b6190>] (__lock_acquire) from [<c03b90cc>] (lock_acquire+0xe0/0x22c) [ 2.331649] [<c03b90cc>] (lock_acquire) from [<c123c310>] (_raw_spin_lock_irqsave+0x54/0x68) [ 2.340048] [<c123c310>] (_raw_spin_lock_irqsave) from [<c0e73fe4>] (ptp_qoriq_settime+0x38/0x80) [ 2.348878] [<c0e73fe4>] (ptp_qoriq_settime) from [<c0e746d4>] (ptp_qoriq_init+0x1f8/0x484) [ 2.357189] [<c0e746d4>] (ptp_qoriq_init) from [<c0e74aac>] (ptp_qoriq_probe+0xd0/0x184) [ 2.365243] [<c0e74aac>] (ptp_qoriq_probe) from [<c0b0a07c>] (platform_drv_probe+0x48/0x9c) [ 2.373555] [<c0b0a07c>] (platform_drv_probe) from [<c0b07a14>] (really_probe+0x1c4/0x400) [ 2.381779] [<c0b07a14>] (really_probe) from [<c0b07e28>] (driver_probe_device+0x78/0x1b8) [ 2.390003] [<c0b07e28>] (driver_probe_device) from [<c0b081d0>] (device_driver_attach+0x58/0x60) [ 2.398832] [<c0b081d0>] (device_driver_attach) from [<c0b082d4>] (__driver_attach+0xfc/0x160) [ 2.407402] [<c0b082d4>] (__driver_attach) from [<c0b05a84>] (bus_for_each_dev+0x68/0xb4) [ 2.415539] [<c0b05a84>] (bus_for_each_dev) from [<c0b06b68>] (bus_add_driver+0x104/0x20c) [ 2.423763] [<c0b06b68>] (bus_add_driver) from [<c0b0909c>] (driver_register+0x78/0x10c) [ 2.431815] [<c0b0909c>] (driver_register) from [<c030313c>] (do_one_initcall+0x8c/0x3ac) [ 2.439954] [<c030313c>] (do_one_initcall) from [<c1f013f4>] (kernel_init_freeable+0x468/0x548) [ 2.448610] [<c1f013f4>] (kernel_init_freeable) from [<c12344d8>] (kernel_init+0x8/0x10c) [ 2.456745] [<c12344d8>] (kernel_init) from [<c03010b4>] (ret_from_fork+0x14/0x20) [ 2.464273] Exception stack(0xea89ffb0 to 0xea89fff8) [ 2.469297] ffa0: 00000000 00000000 00000000 00000000 [ 2.477432] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.485566] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 Fixes: ff54571a747b ("ptp_qoriq: convert to use ptp_qoriq_init/free") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27ptp: correctly disable flags on old ioctlsJacob Keller1-2/+2
Commit 415606588c61 ("PTP: introduce new versions of IOCTLs", 2019-09-13) introduced new versions of the PTP ioctls which actually validate that the flags are acceptable values. As part of this, it cleared the flags value using a bitwise and+negation, in an attempt to prevent the old ioctl from accidentally enabling new features. This is incorrect for a couple of reasons. First, it results in accidentally preventing previously working flags on the request ioctl. By clearing the "valid" flags, we now no longer allow setting the enable, rising edge, or falling edge flags. Second, if we add new additional flags in the future, they must not be set by the old ioctl. (Since the flag wasn't checked before, we could potentially break userspace programs which sent garbage flag data. The correct way to resolve this is to check for and clear all but the originally valid flags. Create defines indicating which flags are correctly checked and interpreted by the original ioctls. Use these to clear any bits which will not be correctly interpreted by the original ioctls. In the future, new flags must be added to the VALID_FLAGS macros, but *not* to the V1_VALID_FLAGS macros. In this way, new features may be exposed over the v2 ioctls, but without breaking previous userspace which happened to not clear the flags value properly. The old ioctl will continue to behave the same way, while the new ioctl gains the benefit of using the flags fields. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Christopher Hall <christopher.s.hall@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-13PTP: introduce new versions of IOCTLsFelipe Balbi1-0/+63
The current version of the IOCTL have a small problem which prevents us from extending the API by making use of reserved fields. In these new IOCTLs, we are now making sure that flags and rsv fields are zero which will allow us to extend the API in the future. Reviewed-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-25ptp: ptp_dte: remove redundant dev_err messageDing Xiang1-4/+1
devm_ioremap_resource already contains error message, so remove the redundant dev_err message Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15ptp: add QorIQ PTP support for DPAA2Yangbo Lu1-1/+1
This patch is to add QorIQ PTP support for DPAA2. Although dpaa2-ptp.c driver is a fsl_mc_driver which is using MC APIs for register accessing, it's same IP block with eTSEC/DPAA/ENETC 1588 timer. We will convert to reuse ptp_qoriq driver by using register ioremap and dropping related MC APIs. Also allow to compile ptp_qoriq with COMPILE_TEST. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13ptp: ptp_clock: Publish scaled_ppm_to_ppbShalom Toledo1-1/+2
Publish scaled_ppm_to_ppb to allow drivers to use it. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 167Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 83 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.021731668@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner1-11/+1
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner6-84/+6
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09ptp_qoriq: fix NULL access if ptp dt node missingClaudiu Manoil1-0/+3
Make sure ptp dt node exists before accessing it in case of NULL pointer call trace. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-05Merge branch 'timers-2038-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull year 2038 updates from Thomas Gleixner: "Another round of changes to make the kernel ready for 2038. After lots of preparatory work this is the first set of syscalls which are 2038 safe: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 The syscall numbers are identical all over the architectures" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) riscv: Use latest system call ABI checksyscalls: fix up mq_timedreceive and stat exceptions unicore32: Fix __ARCH_WANT_STAT64 definition asm-generic: Make time32 syscall numbers optional asm-generic: Drop getrlimit and setrlimit syscalls from default list 32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option compat ABI: use non-compat openat and open_by_handle_at variants y2038: add 64-bit time_t syscalls to all 32-bit architectures y2038: rename old time and utime syscalls y2038: remove struct definition redirects y2038: use time32 syscall names on 32-bit syscalls: remove obsolete __IGNORE_ macros y2038: syscalls: rename y2038 compat syscalls x86/x32: use time64 versions of sigtimedwait and recvmmsg timex: change syscalls to use struct __kernel_timex timex: use __kernel_timex internally sparc64: add custom adjtimex/clock_adjtime functions time: fix sys_timer_settime prototype time: Add struct __kernel_timex time: make adjtime compat handling available for 32 bit ...
2019-02-19ptp_qoriq: don't pass a large struct by value but instead pass it by referenceColin Ian King1-3/+3
Passing the struct ptp_clock_info caps by parameter is passing over 130 bytes of data by value on the stack. Optimize this by passing it by reference instead. Also shinks the object code size: Before: text data bss dec hex filename 12596 2160 64 14820 39e4 drivers/ptp/ptp_qoriq.o After: text data bss dec hex filename 12567 2160 64 14791 39c7 drivers/ptp/ptp_qoriq.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp: add QorIQ PTP support for ENETCYangbo Lu1-1/+1
This patch is to add QorIQ PTP support for ENETC. ENETC PTP driver which is a PCI driver for same 1588 timer IP block will reuse QorIQ PTP driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: fix register memory mapYangbo Lu1-5/+6
The 1588 timer on eTSEC Ethernet controller uses different register memory map with DPAA Ethernet controller. Now the new ENETC Ethernet controller uses same reigster memory map with DPAA. To support ENETC, let's use register memory map of DPAA/ENETC in default. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: add little enadian supportYangbo Lu2-36/+45
There is QorIQ 1588 timer IP block on the new ENETC Ethernet controller. However it uses little endian mode which is different with before. This patch is to add little endian support for the driver by using "little-endian" dts node property. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: convert to use ptp_qoriq_init/freeYangbo Lu1-67/+77
Moved QorIQ PTP clock initialization/free into new functions ptp_qoriq_init()/ptp_qoriq_free(). These functions could also be reused by ENETC PTP drvier which is a PCI driver for same 1588 timer IP block. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: make ptp operations globalYangbo Lu1-11/+16
This patch is to make functions of ptp operations global, so that ENETC PTP driver which is a PCI driver for same 1588 timer IP block could reuse them. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12ptp_qoriq: make structure/function names more consistentYangbo Lu2-162/+162
Strings containing "ptp_qoriq" or "qoriq_ptp" which were used for structure/function names were complained by users. Let's just use the unique "ptp_qoriq" to make these names more consistent. This patch is just to unify the names using "ptp_qoriq". It hasn't changed any functions. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-10Merge tag 'y2038-new-syscalls' of ↵Thomas Gleixner1-1/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038 Pull y2038 - time64 system calls from Arnd Bergmann: This series finally gets us to the point of having system calls with 64-bit time_t on all architectures, after a long time of incremental preparation patches. There was actually one conversion that I missed during the summer, i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes and review comments. The following system calls are now added on all 32-bit architectures using the same system call numbers: 403 clock_gettime64 404 clock_settime64 405 clock_adjtime64 406 clock_getres_time64 407 clock_nanosleep_time64 408 timer_gettime64 409 timer_settime64 410 timerfd_gettime64 411 timerfd_settime64 412 utimensat_time64 413 pselect6_time64 414 ppoll_time64 416 io_pgetevents_time64 417 recvmmsg_time64 418 mq_timedsend_time64 419 mq_timedreceiv_time64 420 semtimedop_time64 421 rt_sigtimedwait_time64 422 futex_time64 423 sched_rr_get_interval_time64 Each one of these corresponds directly to an existing system call that includes a 'struct timespec' argument, or a structure containing a timespec or (in case of clock_adjtime) timeval. Not included here are new versions of getitimer/setitimer and getrusage/waitid, which are planned for the future but only needed to make a consistent API rather than for correct operation beyond y2038. These four system calls are based on 'timeval', and it has not been finally decided what the replacement kernel interface will use instead. So far, I have done a lot of build testing across most architectures, which has found a number of bugs. Runtime testing so far included testing LTP on 32-bit ARM with the existing system calls, to ensure we do not regress for existing binaries, and a test with a 32-bit x86 build of LTP against a modified version of the musl C library that has been adapted to the new system call interface [3]. This library can be used for testing on all architectures supported by musl-1.1.21, but it is not how the support is getting integrated into the official musl release. Official musl support is planned but will require more invasive changes to the library. Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/ Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/ Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
2019-02-07timex: use __kernel_timex internallyDeepa Dinamani1-1/+1
struct timex is not y2038 safe. Replace all uses of timex with y2038 safe __kernel_timex. Note that struct __kernel_timex is an ABI interface definition. We could define a new structure based on __kernel_timex that is only available internally instead. Right now, there isn't a strong motivation for this as the structure is isolated to a few defined struct timex interfaces and such a structure would be exactly the same as struct timex. The patch was generated by the following coccinelle script: virtual patch @depends on patch forall@ identifier ts; expression e; @@ ( - struct timex ts; + struct __kernel_timex ts; | - struct timex ts = {}; + struct __kernel_timex ts = {}; | - struct timex ts = e; + struct __kernel_timex ts = e; | - struct timex *ts; + struct __kernel_timex *ts; | (memset \| copy_from_user \| copy_to_user \)(..., - sizeof(struct timex)) + sizeof(struct __kernel_timex)) ) @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts, + struct __kernel_timex *ts, ...) { ... } @depends on patch forall@ identifier ts; identifier fn; @@ fn(..., - struct timex *ts) { + struct __kernel_timex *ts) { ... } Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: linux-alpha@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25ptp: fix debugfs_simple_attr.cocci warningsYueHaibing1-8/+8
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22ptp: add debugfs support for ptp_qoriqYangbo Lu4-2/+108
This patch is to add debugfs support for ptp_qoriq. Current debugfs supports to control fiper1/fiper2 loopback mode. If the loopback mode is enabled, the fiper1/fiper2 pulse is looped back into trigger1/ trigger2 input. This is very useful for validating hardware and driver without external hardware. Below is an example to enable fiper1 loopback. echo 1 > /sys/kernel/debug/2d10e00.ptp_clock/fiper1-loopback Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22ptp_qoriq: support external trigger stamp FIFOYangbo Lu1-14/+54
The external trigger stamp FIFO was introduced as a new feature for QorIQ 1588 timer IP block. This patch is to support it by adding a new dts property "fsl,extts-fifo". Any QorIQ 1588 timer supporting this feature is required to add this property in its dts node. In addition, the FIFO should be cleaned up before enabling external trigger interrupts. Otherwise, there will be interrupts immediately just after enabling external trigger interrupts. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>