summaryrefslogtreecommitdiffstats
path: root/drivers/power
AgeCommit message (Collapse)AuthorFilesLines
2017-11-15Merge tag 'for-v4.15' of ↵Linus Torvalds6-9/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: - misc minor fixes * tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: cpcap-charger: fix incorrect return value check power: supply: replace pr_* with dev_* power: supply: pcf50633-charger: remove redundant variable charging_start power: supply: generic-adc-battery: remove redundant variable pdata power: supply: max8997: Improve a size determination in probe
2017-11-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual rocket-science from trivial tree for 4.15" * 'for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: MAINTAINERS: relinquish kconfig MAINTAINERS: Update my email address treewide: Fix typos in Kconfig kfifo: Fix comments init/Kconfig: Fix module signing document location misc: ibmasm: Return error on error path HID: logitech-hidpp: fix mistake in printk, "feeback" -> "feedback" MAINTAINERS: Correct path to uDraw PS3 driver tracing: Fix doc mistakes in trace sample tracing: Kconfig text fixes for CONFIG_HWLAT_TRACER MIPS: Alchemy: Remove reverted CONFIG_NETLINK_MMAP from db1xxx_defconfig mm/huge_memory.c: fixup grammar in comment lib/xz: Add fall-through comments to a switch statement
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds4-18/+477
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-13Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
2017-11-13power: supply: cpcap-charger: fix incorrect return value checkPan Bian1-1/+1
Function platform_get_irq_byname() returns a negative error code on failure, and a zero or positive number on success. However, in function cpcap_usb_init_irq(), positive IRQ numbers are also taken as error cases. Use "if (irq < 0)" instead of "if (!irq)" to validate the return value of platform_get_irq_byname(). Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-13Merge branches 'pm-pci', 'pm-avs' and 'pm-docs'Rafael J. Wysocki1-5/+5
* pm-pci: PCI / PM: Add dev_dbg() to print device suspend power states PCI / PM: Do not resume any devices in pci_pm_prepare() * pm-avs: PM / AVS: Use %pS printk format for direct addresses * pm-docs: PM: docs: Fix formatting typo in devices.rst
2017-11-06power: supply: replace pr_* with dev_*Aishwarya Pant2-2/+2
Use kernel preferred dev_* family of functions in place of pr_*, wherever a device object is present. Done with the help of coccinelle. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06power: supply: pcf50633-charger: remove redundant variable charging_startColin Ian King1-2/+0
Variable charging_start is being set but is never read, it is therefore redundant and can be removed. Cleans up sparse warning: drivers/power/supply/pcf50633-charger.c:61:3: warning: Value stored to 'charging_start' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06power: supply: generic-adc-battery: remove redundant variable pdataColin Ian King1-2/+0
Pointer pdata is assigned but never used, so remove it. Cleans up the clang warning: drivers/power/supply/generic-adc-battery.c:211:2: warning: Value stored to 'pdata' is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-06power: supply: max8997: Improve a size determination in probeMarkus Elfring1-2/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-11-03Update MIPS email addressesPaul Burton1-2/+2
MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman4-0/+4
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-29power: supply: sbs-message: fix some code style issuesWolfram Sang1-3/+4
Use 'unsigned int' and curly braces for 'else'. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-29power: supply: sbs-battery: remove unchecked return varWolfram Sang1-1/+1
Since the return value is not checked anyhow, we don't need to store it. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-29power: supply: sbs-battery: remove superfluous variable initWolfram Sang1-7/+3
Those variables are immediately assigned a value afterwards. Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28power: supply: sbs-battery: move gpio present detect to sbs_get_propertyPhil Reid1-10/+13
Currently when a gpio is defined for battery presence it is only used in the sbs_get_battery_presence_and_health function for 2 properties. All other properties currently try to read data form the battery before returning an error if not present. We should know in advance that no data is going to returned. As the driver tries multiple times to access a property, this prevents a lot of smbus accesses, which had a significant effect on device boot-up. As when the device is registered lots of property accesses are attempted during boot. If no gpio is used for presence detection no change in behaviour should occur. Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28power: supply: sbs-manager: Add alert callback and battery change notificationPhil Reid2-5/+127
This adds smb alert support via the smbus_alert driver to generate power_supply_changed notifications when either external power is removed / applied or a battery inserted / removed. Use the i2c alert callback to notify the attached battery driver that a change has occurred. Signed-off-by: Phil Reid <preid@electromag.com.au> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-28power: Adds support for Smart Battery System ManagerKarl-Heinz Schneider3-0/+337
This patch adds support for Smart Battery System Manager. A SBSM is a device listening at I2C/SMBus address 0x0a and is capable of communicating up to four I2C smart battery devices. All smart battery devices are listening at address 0x0b, so the SBSM muliplexes between them. The driver makes use of the I2C-Mux framework to allow smart batteries to be bound via device tree, i.e. the sbs-battery driver. Via sysfs interface the online state and charge type are presented. If the driver is bound as ltc1760 (an implementation of a Dual Smart Battery System Manager) the charge type can also be changed from trickle to fast. Signed-off-by: Karl-Heinz Schneider <karl-heinz@schneider-inet.de> Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi1-1/+1
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-12treewide: Fix typos in KconfigMasanari Iida1-1/+1
This patch fixes some spelling typos found in Kconfig files. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-10-11PM / AVS: Use %pS printk format for direct addressesHelge Deller1-5/+5
Use the %pS instead of the %pF printk format specifier for printing symbols from direct addresses. This is needed for the ia64, ppc64 and parisc64 architectures. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-09-09Merge tag 'for-v4.14' of ↵Linus Torvalds19-489/+1383
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset changes from Sebastian Reichel: "New chip/feature support: - bq27xxx: support updating battery config from DT - bq24190: support loading battery charge info from DT - LTC2941: add LTC2942/LTC2944 support - max17042: add ACPI support - max1721x: new driver Misc: - Move bq27xxx w1 driver from w1 into power-supply subsystem - Introduce power_supply_set_input_current_limit_from_supplier - constify stuff - some minor fixes" * tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits) power: supply: bq27xxx: enable writing capacity values for bq27421 power: supply: bq24190_charger: Get input_current_limit from our supplier power: supply: bq24190_charger: Export 5V boost converter as regulator power: supply: bq24190_charger: Add power_supply_battery_info support power: supply: bq24190_charger: Add property system-minimum-microvolt power: supply: bq24190_charger: Enable devicetree config dt-bindings: power: supply: Add docs for TI BQ24190 battery charger power: supply: bq27xxx: Remove duplicate chip data arrays power: supply: bq27xxx: Enable data memory update for certain chips power: supply: bq27xxx: Add chip IDs for previously shadowed chips power: supply: bq27xxx: Create single chip data table power: supply: bq24190_charger: Add ti,bq24192i to devicetree table power: supply: bq24190_charger: Add input_current_limit property power: supply: Add power_supply_set_input_current_limit_from_supplier helper power: supply: max17042_battery: Fix compiler warning power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies() power: supply: make device_attribute const power: supply: max17042_battery: Fix ACPI interrupt issues power: supply: max17042_battery: Add support for ACPI enumeration power: supply: lp8788: Make several arrays static const * const ...
2017-09-07Merge tag 'mfd-next-4.14' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - RK805 Power Management IC (PMIC) - ROHM BD9571MWV-M MFD Power Management IC (PMIC) - Texas Instruments TPS68470 Power Management IC (PMIC) & LEDs New Device Support: - Add support for HiSilicon Hi6421v530 to hi6421-pmic-core - Add support for X-Powers AXP806 to axp20x - Add support for X-Powers AXP813 to axp20x - Add support for Intel Sunrise Point LPSS to intel-lpss-pci New Functionality: - Amend API to provide register layout; atmel-smc Fix-ups: - DT re-work; omap, nokia - Header file location change {I2C => MFD}; dm355evm_msp, tps65010 - Fix chip ID formatting issue(s); rk808 - Optionally register touchscreen devices; da9052-core - Documentation improvements; twl-core - Constification; rtsx_pcr, ab8500-core, da9055-i2c, da9052-spi - Drop unnecessary static declaration; max8925-i2c - Kconfig changes (missing deps and remove module support) - Slim down oversized licence statement; hi6421-pmic-core - Use managed resources (devm_*); lp87565 - Supply proper error checking/handling; t7l66xb Bug Fixes: - Fix counter duplication issue; da9052-core - Fix potential NULL deference issue; max8998 - Leave SPI-NOR write-protection bit alone; lpc_ich - Ensure device is put into reset during suspend; intel-lpss - Correct register offset variable size; omap-usb-tll" * tag 'mfd-next-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (61 commits) mfd: intel_soc_pmic: Differentiate between Bay and Cherry Trail CRC variants mfd: intel_soc_pmic: Export separate mfd-cell configs for BYT and CHT dt-bindings: mfd: Add bindings for ZII RAVE devices mfd: omap-usb-tll: Fix register offsets mfd: da9052: Constify spi_device_id mfd: intel-lpss: Put I2C and SPI controllers into reset state on suspend mfd: da9055: Constify i2c_device_id mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices mfd: t7l66xb: Handle return value of clk_prepare_enable mfd: Add ROHM BD9571MWV-M PMIC DT bindings mfd: intel_soc_pmic_chtwc: Turn Kconfig option into a bool mfd: lp87565: Convert to use devm_mfd_add_devices() mfd: Add support for TPS68470 device mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Haswell/Broadwell mfd: syscon: atmel-smc: Add helper to retrieve register layout mfd: axp20x: Use correct platform device ID for many PEK dt-bindings: mfd: axp20x: Introduce bindings for AXP813 mfd: axp20x: Add support for AXP813 PMIC dt-bindings: mfd: axp20x: Add AXP806 to supported list of chips mfd: Add ROHM BD9571MWV-M MFD PMIC driver ...
2017-09-05Merge tag 'pm-4.14-rc1' of ↵Linus Torvalds1-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...
2017-09-04mfd: twl: Move header file out of I2C realmWolfram Sang1-1/+1
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-31power: supply: bq27xxx: enable writing capacity values for bq27421H. Nikolaus Schaller1-4/+0
Tested on Pyra prototype with bq27421. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-30power: supply: bq24190_charger: Get input_current_limit from our supplierHans de Goede1-0/+30
On some devices the USB Type-C port power (USB PD 2.0) negotiation is done by a separate port-controller IC, while the current limit is controlled through another (charger) IC. It has been decided to model this by modelling the external Type-C power brick (adapter/charger) as a power-supply class device which supplies the charger-IC, with its voltage-now and current-max representing the negotiated voltage and max current draw. This commit adds support for this to the bq24190_charger driver by adding an external_power_changed callback and calling power_supply_set_input_current_limit_from_supplier from this callback. This callback will only get called if the bq24190 has a parent-supply. Note this replaces the functionality to get the current-limit from an extcon device, which will be removed in a follow-up commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-30power: supply: bq24190_charger: Export 5V boost converter as regulatorHans de Goede1-0/+112
Register the 5V boost converter as a regulator named "usb_otg_vbus". This commit also adds support for bq24190_platform_data, through which non device-tree platforms can pass the regulator_init_data (containing mappings for the consumer amongst other things). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq24190_charger: Add power_supply_battery_info supportLiam Breck1-0/+87
Set pre-charge and charge-term current, obtained from power_supply_battery_info. Add sysfs attributes precharge_current & charge_term_current. Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq24190_charger: Add property system-minimum-microvoltLiam Breck1-0/+25
Set minimum system voltage limit obtained from device property. Cc: Hans de Goede <hdegoede@redhat.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq24190_charger: Enable devicetree configLiam Breck1-20/+36
Add get_config(). Rename set_mode_host() to set_config(). Call get_config() and hw_init() after power_supply_register(). No functional changes. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Liam Breck <kernel@networkimprov.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Remove duplicate chip data arraysLiam Breck1-159/+10
BQ2751X & BQ27510G3 have identical regs & props. BQ2750X & BQ27510G3 have identical props. BQ27500 & BQ27510G1 & BQ27510G2 have identical regs & props. BQ27500 & BQ27520G2 have identical props. Remove the duplicate arrays. No functional changes to the driver. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Enable data memory update for certain chipsLiam Breck1-49/+126
Support data memory update on BQ27425. Parameters from TI datasheets are also provided for BQ27500, 545, 421, 441, 621; however these are commented out, as they are not tested. Add BQ27XXX_O_CFGUP & _O_RAM for use in bq27xxx_chip_data[n].opts and by data memory update functions. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Add chip IDs for previously shadowed chipsLiam Breck2-59/+77
For the existing features, these chips act like others already ID'd, so they had false but functional IDs. We will be adding features which require correct IDs, so the following IDs are added: BQ2752X, 531, 542, 546, 742, 425, 441, 621 Chip-specific features are now tracked by BQ27XXX_O_* flags in di->opts. No functional changes to the driver. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq27xxx: Create single chip data tableLiam Breck1-61/+60
To support new features which require different data for each chip, we unify the bq27xxx_regs and bq27xxx_battery_props tables into a single one. No functional changes to the driver. Signed-off-by: Liam Breck <kernel@networkimprov.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq24190_charger: Add ti,bq24192i to devicetree tableLiam Breck1-0/+1
bq24192i was previously only in ID table, so add it to DT table. Cc: Tony Lindgren <tony@atomide.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Liam Breck <kernel@networkimprov.net> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: bq24190_charger: Add input_current_limit propertyHans de Goede1-0/+35
Export the input current limit of the charger as a POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT property on the charger power_supply class device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: Add power_supply_set_input_current_limit_from_supplier helperHans de Goede1-0/+41
On some devices the USB Type-C port power (USB PD 2.0) negotiation is done by a separate port-controller IC, while the current limit is controlled through another (charger) IC. It has been decided to model this by modelling the external Type-C power brick (adapter/charger) as a power-supply class device which supplies the charger-IC, with its voltage-now and current-max representing the negotiated voltage and max current draw. This commit adds a power_supply_set_input_current_limit_from_supplier helper function which charger power-supply drivers can call to get the max-current from their supplier and have this applied through their set_property call-back to their input-current-limit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-29power: supply: max17042_battery: Fix compiler warningHans de Goede1-1/+1
Fix drivers/power/supply/max17042_battery.c:1059:6: warning: 'acpi_id' may be used uninitialized in this function. No idea why my gcc version did not catch this. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28power: supply: core: Delete two error messages for a failed memory ↵Markus Elfring1-6/+2
allocation in power_supply_check_supplies() Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28power: supply: make device_attribute constBhumika Goyal1-1/+1
Make these const as they are only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28power: supply: max17042_battery: Fix ACPI interrupt issuesHans de Goede1-5/+15
On some x86/ACPI boards the DSDT defines an ACPI event handler for the max17047 IRQ, this causes several problems: 1) We need to share the IRQ to avoid an error getting it 2) Even of we are willing to share, we may fail to share because some DSDTs claim it exclusivly 3) If we are unable to share the IRQ, or the IRQ is only listed as an ACPI event source and not in the max1704 firmware node, then the charge threshold IRQ (which is used to give an IRQ every 1 percent charge change) becomes a problem, the ACPI event handler will not update this to the next 1 percent threshold, so the IRQ keeps firing and we get an IRQ storm pegging 1 CPU core. This happens despite the max17042 driver not setting the charge threshold because Windows uses it and leaves it set on reboot. So if we are unable to get the IRQ we need to reprogram the charge threshold to its disabled setting. This commit fixes al of the above, while at it it also makes the error msg when being unable to get the IRQ consistent with other messages. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-28power: supply: max17042_battery: Add support for ACPI enumerationHans de Goede1-1/+21
Some x86 devices enumerate a max17047 fuel-gauge through a MAX17047 ACPI firmware-node, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-25PM / AVS: rockchip-io: add io selectors and supplies for RV1108David Wu1-0/+38
This adds the necessary data for handling io voltage domains on the RV1108. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-15power: wm831x_power: Support USB charger current limit managementBaolin Wang1-0/+72
Integrate with the newly added USB charger interface to limit the current we draw from the USB input based on the input device configuration identified by the USB stack, allowing us to charge more quickly from high current inputs without drawing more current than specified from others. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-08-12power: supply: lp8788: Make several arrays static const * constColin Ian King1-6/+12
Don't populate various read only arrays on the stack but make them static const, making the object code smaller and saves 148 bytes overall: Before: text data bss dec hex filename 11940 4496 64 16500 4074 lp8788-charger.o After: text data bss dec hex filename 11472 4816 64 16352 3fe0 lp8788-charger.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11power: supply: charger-manager: Slighly simplify codeChristophe JAILLET1-2/+1
Use 'sizeof(*var)' instead of the equivalent 'sizeof(data structure type)' because it is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11power: supply: charger-manager: Fix a commentChristophe JAILLET1-2/+2
Update a comment which is no more up to date since commit 2ed9e9b653095. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-11power: supply: charger-manager: Fix a NULL pointer dereference in ↵Christophe JAILLET1-0/+2
'charger_manager_probe()' 'devm_kzalloc()' can return NULL. Return -ENOMEM in this case in order to avoid a NULL pointer dereference later on. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2017-08-09power: supply: Fix power_supply_am_i_supplied to return -ENODEV when apropriateHans de Goede1-2/+3
Commit 2848e039c562 ("power: supply: Make power_supply_am_i_supplied return -ENODEV if there are no suppliers") was supposed to make power_supply_am_i_supplied() return -ENODEV when there are no supplies which supply the supply passed to it. But instead it will only return -ENODEV when there are no supplies at all as data->count++; is incremented on every call of the iterator, rather then only when __power_supply_is_supplied_by returns true. This commit fixes this. Fixes: 2848e039c562 ("power: supply: Make power_supply_am_i_supplied ...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>