summaryrefslogtreecommitdiffstats
path: root/drivers/power/ab8500_fg.c
AgeCommit message (Collapse)AuthorFilesLines
2016-08-11power: move power supply drivers to power/supplySebastian Reichel1-3272/+0
This moves all power supply drivers from drivers/power/ to drivers/power/supply/. The intention is a cleaner source tree, since drivers/power/ also contains frameworks unrelated to power supply, like adaptive voltage scaling. Signed-off-by: Sebastian Reichel <sre@kernel.org>
2016-03-17power: ab8500: convert to use match_string() helperAndy Shevchenko1-10/+5
The new helper returns index of the mathing string in an array. We would use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-13power_supply: Change ownership from driver to coreKrzysztof Kozlowski1-76/+48
Change the ownership of power_supply structure from each driver implementing the class to the power supply core. The patch changes power_supply_register() function thus all drivers implementing power supply class are adjusted. Each driver provides the implementation of power supply. However it should not be the owner of power supply class instance because it is exposed by core to other subsystems with power_supply_get_by_name(). These other subsystems have no knowledge when the driver will unregister the power supply. This leads to several issues when driver is unbound - mostly because user of power supply accesses freed memory. Instead let the core own the instance of struct 'power_supply'. Other users of this power supply will still access valid memory because it will be freed when device reference count reaches 0. Currently this means "it will leak" but power_supply_put() call in next patches will solve it. This solves invalid memory references in following race condition scenario: Thread 1: charger manager Thread 2: power supply driver, used by charger manager THREAD 1 (charger manager) THREAD 2 (power supply driver) ========================== ============================== psy = power_supply_get_by_name() Driver unbind, .remove power_supply_unregister() Device fully removed psy->get_property() The 'get_property' call is executed in invalid context because the driver was unbound and struct 'power_supply' memory was freed. This could be observed easily with charger manager driver (here compiled with max17040 fuel gauge): $ cat /sys/devices/virtual/power_supply/cm-battery/capacity & $ echo "1-0036" > /sys/bus/i2c/drivers/max17040/unbind [ 55.725123] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 55.732584] pgd = d98d4000 [ 55.734060] [00000000] *pgd=5afa2831, *pte=00000000, *ppte=00000000 [ 55.740318] Internal error: Oops: 80000007 [#1] PREEMPT SMP ARM [ 55.746210] Modules linked in: [ 55.749259] CPU: 1 PID: 2936 Comm: cat Tainted: G W 3.19.0-rc1-next-20141226-00048-gf79f475f3c44-dirty #1496 [ 55.760190] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 55.766270] task: d9b76f00 ti: daf54000 task.ti: daf54000 [ 55.771647] PC is at 0x0 [ 55.774182] LR is at charger_get_property+0x2f4/0x36c [ 55.779201] pc : [<00000000>] lr : [<c034b0b4>] psr: 60000013 [ 55.779201] sp : daf55e90 ip : 00000003 fp : 00000000 [ 55.790657] r10: 00000000 r9 : c06e2878 r8 : d9b26c68 [ 55.795865] r7 : dad81610 r6 : daec7410 r5 : daf55ebc r4 : 00000000 [ 55.802367] r3 : 00000000 r2 : daf55ebc r1 : 0000002a r0 : d9b26c68 [ 55.808879] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 55.815994] Control: 10c5387d Table: 598d406a DAC: 00000015 [ 55.821723] Process cat (pid: 2936, stack limit = 0xdaf54210) [ 55.827451] Stack: (0xdaf55e90 to 0xdaf56000) [ 55.831795] 5e80: 60000013 c01459c4 0000002a c06f8ef8 [ 55.839956] 5ea0: db651000 c06f8ef8 daebac00 c04cb668 daebac08 c0346864 00000000 c01459c4 [ 55.848115] 5ec0: d99eaa80 c06f8ef8 00000fff 00001000 db651000 c027f25c c027f240 d99eaa80 [ 55.856274] 5ee0: d9a06c00 c0146218 daf55f18 00001000 d99eaa80 db4c18c0 00000001 00000001 [ 55.864468] 5f00: daf55f80 c0144c78 c0144c54 c0107f90 00015000 d99eaab0 00000000 00000000 [ 55.872603] 5f20: 000051c7 00000000 db4c18c0 c04a9370 00015000 00001000 daf55f80 00001000 [ 55.880763] 5f40: daf54000 00015000 00000000 c00e53dc db4c18c0 c00e548c 0000000d 00008124 [ 55.888937] 5f60: 00000001 00000000 00000000 db4c18c0 db4c18c0 00001000 00015000 c00e5550 [ 55.897099] 5f80: 00000000 00000000 00001000 00001000 00015000 00000003 00000003 c000f364 [ 55.905239] 5fa0: 00000000 c000f1a0 00001000 00015000 00000003 00015000 00001000 0001333c [ 55.913399] 5fc0: 00001000 00015000 00000003 00000003 00000002 00000000 00000000 00000000 [ 55.921560] 5fe0: 7fffe000 be999850 0000a225 b6f3c19c 60000010 00000003 00000000 00000000 [ 55.929744] [<c034b0b4>] (charger_get_property) from [<c0346864>] (power_supply_show_property+0x48/0x20c) [ 55.939286] [<c0346864>] (power_supply_show_property) from [<c027f25c>] (dev_attr_show+0x1c/0x48) [ 55.948130] [<c027f25c>] (dev_attr_show) from [<c0146218>] (sysfs_kf_seq_show+0x84/0x104) [ 55.956298] [<c0146218>] (sysfs_kf_seq_show) from [<c0144c78>] (kernfs_seq_show+0x24/0x28) [ 55.964536] [<c0144c78>] (kernfs_seq_show) from [<c0107f90>] (seq_read+0x1b0/0x484) [ 55.972172] [<c0107f90>] (seq_read) from [<c00e53dc>] (__vfs_read+0x18/0x4c) [ 55.979188] [<c00e53dc>] (__vfs_read) from [<c00e548c>] (vfs_read+0x7c/0x100) [ 55.986304] [<c00e548c>] (vfs_read) from [<c00e5550>] (SyS_read+0x40/0x8c) [ 55.993164] [<c00e5550>] (SyS_read) from [<c000f1a0>] (ret_fast_syscall+0x0/0x48) [ 56.000626] Code: bad PC value [ 56.011652] ---[ end trace 7b64343fbdae8ef1 ]--- Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for compal-laptop.c] Acked-by: Darren Hart <dvhart@linux.intel.com> [for the mfd part] Acked-by: Lee Jones <lee.jones@linaro.org> [for the hid part] Acked-by: Jiri Kosina <jkosina@suse.cz> [for the acpi part] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13power_supply: ab8500: Use power_supply_*() API for accessing function attrsKrzysztof Kozlowski1-1/+1
Replace direct calls to power supply function attributes with wrappers. Wrappers provide safe access in case of unregistering the power supply (e.g. by removing the driver). Replace: - get_property -> power_supply_get_property Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-13power_supply: Move run-time configuration to separate structureKrzysztof Kozlowski1-3/+5
Add new structure 'power_supply_config' for holding run-time initialization data like of_node, supplies and private driver data. The power_supply_register() function is changed so all power supply drivers need updating. When registering the power supply this new 'power_supply_config' should be used instead of directly initializing 'struct power_supply'. This allows changing the ownership of power_supply structure from driver to the power supply core in next patches. When a driver does not use of_node or supplies then it should use NULL as config. If driver uses of_node or supplies then it should allocate config on stack and initialize it with proper values. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> [for the nvec part] Reviewed-by: Marc Dietrich <marvin24@gmx.de> [for drivers/platform/x86/compal-laptop.c] Reviewed-by: Darren Hart <dvhart@linux.intel.com> [for drivers/hid/*] Reviewed-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-03-07ab8500_fg.c: only request threaded IRQs when necessaryValentin Rothberg1-13/+33
All 5 IRQ handlers of the driver are requested as threaded interrupt handlers. However, only 1 handler can block. The remaining 4 handlers defer the actual handling to a workqueue. Hence, 4 of 5 IRQ handlers have a considerable overhead, since they are executed in a kernel thread to schedule another kernel thread (workqueue). This change splits up the 5 interrupt handlers into top halves (_th) and bottom halves (_bh) and resolves the aforementioned overhead by only requesting threaded interrupts (i.e., bottom halves) when necessary. Signed-off-by: Valentin Rothberg <Valentin.Rothberg@lip6.fr> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25ab8500_fg: use jiffies_to_msecs for jiffies conversionNicholas Mc Guire1-2/+2
Converting jiffies to milliseconds by "val * 1000 / HZ" is technically OK but jiffies_to_msecs(val) is the cleaner solution and handles all corner cases correctly. This is a minor API consolidation only and should make things more readable. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25ab8500_fg: match return type of wait_for_completion_timeoutNicholas Mc Guire1-2/+2
return type of wait_for_completion_timeout is unsigned long not int. as timeout is used for wait_for_completion_timeout exclusively here its type is simply changed to unsigned long. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-02-25power_supply: ab8500_fg: Simplify creation and removal of sysfs entriesKrzysztof Kozlowski1-18/+11
Simplify a little ab8500_fg_sysfs_psy_create_attrs () and ab8500_fg_sysfs_psy_remove_attrs() functions because they received pointer to power supply device which was then converted into power supply instance. Then it was converted into struct ab8500_fg. The path looked like: ab8500_fg->psy.dev -> psy -> ab8500_fg Instead just pass pointer to struct ab8500_fg directly so all conversions won't be necessary. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-01-21power: ab8500_fg.c: Remove unused functionRickard Strandqvist1-14/+0
Remove the function ab8500_fg_reinit() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-10-20power: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-15power: ab8500_fg.c: use 64-bit time typesEbru Akagunduz1-8/+9
This patch changes 32-bit time types to 64-bit in drivers/power/ab8500_fg.c timespec and time_t can only represent signed 32-bit dates but the driver should represent dates that are after January 2038. So used time64.h header file and its proper types and functions. Use time64_t type instead of __kernel_time_t for time_stamps variable of ab8500_fg_avg_cap struct Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2014-10-05power: ab8500_fg: Fix build warningGuenter Roeck1-4/+5
Fix drivers/power/ab8500_fg.c: In function 'ab8500_fg_probe': drivers/power/ab8500_fg.c:2989:27: warning: 'i' may be used uninitialized in this function drivers/power/ab8500_fg.c:2972:15: note: 'i' was declared here which actually points to a real bug. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-2/+2
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-06power_supply: Replace strict_strtoul() with kstrtoul()Jingoo Han1-3/+3
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-06-06ab8500_bm: Remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16ab8500_{bmdata,fg}: Add const attributes to some data arraysHongbo Zhang1-2/+2
This patch adds const attributes to AB8500 power and temperature related read-only data arrays. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-03-07ab8500-fg: Change current calculationlme004371-4/+4
This patch updates the gas gauge constant for electric current calculation according to hardware specification. Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07ab8500-bm: Trivially fix up some incorrect and out-of-date commentsMarcus Cooper1-2/+2
Some of the comments in the ab8500 drivers reflect the behaviour of the original device. As this driver now supports newer devices then these comments are now redundant. Also some IRQ comments are incorrect. Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07ab8500-charger: Remove duplicate codeLee Jones1-1/+0
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07ab8500-fg: Allow capacity to raise from 1% when chargingHakan Berg1-4/+2
When battery capacity was going below 1% fg is not supposed to report 0% unless we've got the LOW_BAT IRQ, no matter what the FG-algorithm says. This made fg get stuck at 1% if charger is connected when capacity is 1%. Signed-off-by: Hakan BERG <hakan.berg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2013-03-07ab8500-fg: Report unscaled capacityMartin Bergstrom1-3/+1
Unscaled capacity should be reported for POWER_SUPPLY_PROP_CAPACITY. Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-03-07ab8500-fg: Add power cut feature for ab8505 and ab8540Lee Jones1-0/+474
Add support for a power cut feature which allows user to configure when ab8505 and ab8540 based platforms should shut down system due to low battery. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-23ab8500-fg: Use correct battery charge full designRajkumar Kasirajan1-1/+2
If battery is not identified while fg probe, mah_max_design gets initialized with unknown battery's charge full design. Reinitialize mah_max_design if battery is identified after fg probe. Signed-off-by: Rajkumar Kasirajan <rajkumar.kasirajan@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Vijaya Kumar K-1 <vijay.kilari@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Olivier CLERGEAUD <olivier.clergeaud@stericsson.com> Reviewed-by: Arun MURTHY <arun.murthy@stericsson.com> Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com> Tested-by: Rupesh KUMAR <rupesh.kumar@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-01-23ab8500-bm: Flush all work queues before suspendingJonas Aaberg1-0/+5
Flush all workqueues at suspend time to avoid suspending during work. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
2013-01-23ab8500-fg: Go to INIT_RECOVERY when charger removedMartin Bergström1-1/+1
When the charger is removed we need to go to INIT_RECOVERY state instead of directly to RECOVERY state. Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-01-23ab8500-fg: Adjust for RF bursts voltage dropsHakan Berg1-14/+27
Changed conditions for restarting low battery measurements counter and adjusted the interval between measurements to avoid RF burst induced voltage drops, and to shorten time to decide to shut down. Signed-off-by: Hakan Berg <hakan.berg@stericsson.com> Signed-off-by: Martin Bergstrom <martin.bergstrom@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
2013-01-15ab8500_fg: Remove pointless round_jiffies() callLee Jones1-1/+1
As HZ is a full-second, there is little point in rounding it. Let's save a few cycles by using HZ directly. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_fg: Overflow in current calculationPaer-Olof Haakansson1-5/+4
When calculating the average current the nominator will overflow when the charging current is high. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Henrik Sölver <henrik.solver@stericsson.com> Reviewed-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Par-Olof HAKANSSON <par-olof.hakansson@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_fg: Added support for BATT_OVVHakan Berg1-15/+15
Add support for the battery over-voltage situation Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Hakan Berg <hakan.berg@stericsson.com> Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_fg: Round capacity outputpender011-13/+15
Round the capacity values for better enduser experience. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: pender01 <peter.enderborg@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Tested-by: Marcus COOPER <marcus.xm.cooper@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_fg: Balance IRQ enableRickard Andersson1-0/+1
In case of time out error IRQ needs to be disabled otherwise we will get unbalanced enable/disable pairs. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_bm: Recharge condition not optimal for batteryMarcus Cooper1-11/+135
Today the battery recharge is determined with a voltage threshold. This voltage threshold is only valid when the battery is relaxed. In charging algorithm the voltage read is the loaded battery voltage and no compensation is done to get the relaxed voltage. When maintenance charging is not selected, this makes the recharging condition to almost immediately activate when there is a discharge present on the battery. Depending on which vendor the battery comes from this behavior can wear out the battery much faster than normal. The fuelgauge driver is responsible to monitor the actual battery capacity and is able to estimate the remaining capacity. It is better to use the remaining capacity as a limit to determine when battery should be recharged. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Reviewed-by: Hakan BERG <hakan.berg@stericsson.com> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_fg: Replace msleep() with usleep_range() for greater accuracyJonas Aaberg1-1/+1
Doing so provides a greater degree of accuracy when dealing with time-frames between 1us and 20ms. msleep() is only accurate for wake-ups greater than 20ms. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonas ABERG <jonas.aberg@stericsson.com> Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15ab8500_bm: Skip first CCEOC irq for instant currentJohan Bjornstedt1-8/+55
When enabling the CCEOC irq we might get false interrupt from ab8500-driver due to the latched value will be saved and interpreted as an IRQ when enabled Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Johan Bjornstedt <johan.bjornstedt@stericsson.com> Signed-off-by: Henrik Solver <henrik.solver@stericsson.com> Reviewed-by: Karl KOMIEROWSKI <karl.komierowski@stericsson.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-05Merge branch 'for-anton' of git://git.linaro.org/people/ljones/linux-3.0-ux500Anton Vorontsov1-62/+61
2012-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linuxAnton Vorontsov1-3/+3
The merge is merely to fix conflicts before sending a pull request. Conflicts: drivers/power/ab8500_btemp.c drivers/power/ab8500_charger.c drivers/power/ab8500_fg.c drivers/power/abx500_chargalg.c drivers/power/max8925_power.c Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-12-11ab8500_fg: Reorder obtainment of platform specific battery management dataLee Jones1-14/+13
Now that we always pass platform specific battery management data through platform_data instead of obtaining it via different means depending the way be boot the system (DT or ATAGs); we need to re-jiggle the way we acquire it in the driver start-up functions. Now it is wrong for it to be missing, but we still allow Device Tree code to fiddle with it once we've confirmed it's there. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11ab8500_bm: Always send platform specific battery information via pdataLee Jones1-1/+1
Currently the AB8500 battery management subsystem receives platform specific information via two different means depending on how the platform is booted. If DT is not enabled, a reference to a *_bm_data data structure containing each platform specific attribute is passed though platform_data. However, if DT is enabled, then platform_data is empty and the reference is gained though a DT specific probe function. There are two issues here 1) the same reference is being collected each time and 2) the DT way doesn't allow any provisions to select different platform specific attributes, which kind of defeats the object. Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11ab8500_bm: Rename battery management platform data to something more logicalLee Jones1-48/+48
The platform specific battery management configuration data structure is currently called 'bat' short for 'battery'; however, it contains information for all components of the battery management group, rather than information pertaining to the battery itself - there are other structures for that. So, in keeping with its structure namesake 'abx500_bm_data', we rename it to 'bm' here. Using similar logic, we're also renaming 'bmdevs_of_probe' to the more device specific 'ab8500_bm_of_probe'. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11ab8500_fg: Don't clear the CCMuxOffset bitKalle Komierowski1-4/+4
The CCMuxOffset bit is not kept set. This will force the columb counter of the AB8500 to use the measure offset calibration. This should increase the accuracy of the fuel gauge. Signed-off-by: Kalle Komierowski <karl.komierowski@stericsson.com> Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2012-11-28power: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28power: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28power: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-18ab8500: Add devicetree support for fuelgaugeRajanikanth H.V1-40/+42
- This patch adds device tree support for fuelgauge driver - optimize bm devices platform_data usage and of_probe(...) Note: of_probe() routine for battery managed devices is made common across all bm drivers. - test status: - interrupt numbers assigned differs between legacy and FDT mode. Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-10-07Merge tag 'for-v3.7' of git://git.infradead.org/battery-2.6Linus Torvalds1-0/+1
Pull battery updates from Anton Vorontsov: "1. New drivers: - Marvell 88pm860x charger and battery drivers; - Texas Instruments LP8788 charger driver; 2. Two new power supply properties: whether a battery is authentic, and chargers' maximal currents and voltages; 3. A lot of TI LP8727 Charger cleanups; 4. New features for Charger Manager, mainly now we can disable specific regulators; 5. Random fixes and cleanups for other drivers." Fix up trivial conflicts in <linux/mfd/88pm860x.h> * tag 'for-v3.7' of git://git.infradead.org/battery-2.6: (52 commits) pda_power: Remove ac_draw_failed goto and label charger-manager: Add support sysfs entry for charger charger-manager: Support limit of maximum possible charger-manager: Check fully charged state of battery periodically lp8727_charger: More pure cosmetic improvements lp8727_charger: Fix checkpatch warning lp8727_charger: Add description in the private data lp8727_charger: Fix a typo - chg_parm to chg_param lp8727_charger: Make some cosmetic changes in lp8727_delayed_func() lp8727_charger: Clean up lp8727_charger_changed() lp8727_charger: Return if the battery is discharging lp8727_charger: Make lp8727_charger_get_propery() simpler lp8727_charger: Make lp8727_ctrl_switch() inline lp8727_charger: Make lp8727_init_device() shorter lp8727_charger: Clean up lp8727_is_charger_attached() lp8727_charger: Use specific definition lp8727_charger: Clean up lp8727 definitions lp8727_charger: Use the definition rather than enum lp8727_charger: Fix code for getting battery temp lp8727_charger: Clear interrrupts at inital time ...
2012-08-22ab8500_fg: Fix error return codeJulia Lawall1-0/+1
Initialize return variable before exiting on an error path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-08-21workqueue: make deferrable delayed_work initializer names consistentTejun Heo1-4/+4
Initalizers for deferrable delayed_work are confused. * __DEFERRED_WORK_INITIALIZER() * DECLARE_DEFERRED_WORK() * INIT_DELAYED_WORK_DEFERRABLE() Rename them to * __DEFERRABLE_WORK_INITIALIZER() * DECLARE_DEFERRABLE_WORK() * INIT_DEFERRABLE_WORK() This patch doesn't cause any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2012-05-05ab8500: Clean up probe routinesLee Jones1-6/+10
These patches clean up some ugliness and brings the variable initialisation formatting more into line with other drivers. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 13:22:05 +0000