summaryrefslogtreecommitdiffstats
path: root/drivers/pnp
AgeCommit message (Collapse)AuthorFilesLines
2008-03-26pnpacpi: reduce printk severity for "pnpacpi: exceeded the max number of ..."Len Brown1-4/+4
We have been printing these messages at KERN_ERR since 2.6.24, per http://bugzilla.kernel.org/show_bug.cgi?id=9535 But KERN_ERR pops up on a console booted with "quiet" and causes users to get alarmed and file bugs about the message itself: https://bugzilla.redhat.com/show_bug.cgi?id=436589 So reduce the severity of these messages to KERN_WARNING, which is not printed by "quiet". This message will still be seen without "quiet", but a lot of messages are printed in that mode and it will be less likely to cause undue alarm. We could go all the way to KERN_DEBUG, but this is a real warning after all, so it seems prudent not to require "debug" to see it. Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-22ISAPNP: fix limits of logical device register setBjorn Helgaas1-8/+17
PNP_MAX_MEM and PNP_MAX_PORT are mainly used to size tables of PNP device resources. In 2.6.24, we increased their values to accomodate ACPI devices that have many resources: 2.6.23 2.6.24 ------ ------ PNP_MAX_MEM 4 12 PNP_MAX_PORT 8 40 However, ISAPNP also used these constants as the size of parts of the logical device register set. This register set is fixed by hardware, so increasing the constants meant that we were reading and writing unintended parts of the register set. This patch changes ISAPNP to use the correct register set sizes (the same values we used prior to 2.6.24). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-12PNP: disable PNP motherboard resources that overlap PCI BARsBjorn Helgaas1-0/+73
Some BIOSes have PNP motherboard devices with resources that partially overlap PCI BARs. The PNP system driver claims these motherboard resources, which prevents the normal PCI driver from requesting them later. This patch disables the PNP resources that conflict with PCI BARs so they won't be claimed by the PNP system driver. Of course, this only works if PCI devices have already been enumerated. Currently this is the case because PCI devices are discovered before any PNP init via this path: acpi_pci_root_init() -> acpi_pci_root_add() -> pci_acpi_scan_root() -> pci_scan_bus_parented() -> pci_scan_child_bus() -> ... Avuton Olrich tested this and confirmed that it fixes his ALSA sound card (see http://lkml.org/lkml/2008/1/27/168). References: https://bugzilla.redhat.com/show_bug.cgi?id=280641 https://bugzilla.redhat.com/show_bug.cgi?id=313491 http://lkml.org/lkml/2008/1/9/449 http://thread.gmane.org/gmane.linux.acpi.devel/27312 http://lkml.org/lkml/2008/1/27/168 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-12PNP: revert Supermicro H8DCE motherboard quirkBjorn Helgaas1-43/+0
There are other systems with similar problems (http://lkml.org/lkml/2008/1/27/168), so we need a more generic quirk. Remove the Supermicro-specific one first. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14Merge branch 'release' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: DMI: quirk for FSC ESPRIMO Mobile V5505 ACPI: DMI blacklist updates pnpacpi: __initdata is not an identifier ACPI: static acpi_chain_head ACPI: static acpi_find_dsdt_initrd() ACPI: static acpi_no_initrd_override_setup() thinkpad_acpi: static ACPI suspend: Execute _WAK with the right argument cpuidle: Add Documentation ACPI, cpuidle: Clarify C-state description in sysfs ACPI: fix suspend regression due to idle update
2008-02-14Dont touch fs_struct in driversJan Blunck1-2/+0
The sound drivers and the pnpbios core test for current->root != NULL. This test seems to be unnecessary since we always have rootfs mounted before initializing the drivers. Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14pnpacpi: __initdata is not an identifierRoel Kluin1-1/+1
sparse complains at drivers/pnp/pnpacpi/core.c:39 with the error: Trying to use reserved word '__attribute__' as identifier Expected ) in function declarator, got ".init.data" and at drivers/pnp/pnpacpi/core.c:49:38 with the error: undefined identifier 'excluded_id_list' With the patch below these sparse complaints do not occur Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07Merge branches 'release', 'bugzilla-6217', 'bugzilla-6629', 'bugzilla-6933', ↵Len Brown1-1/+1
'bugzilla-7186', 'bugzilla-8269', 'bugzilla-8570', 'bugzilla-9139', 'bugzilla-9277', 'bugzilla-9341', 'bugzilla-9444', 'bugzilla-9614', 'bugzilla-9643' and 'bugzilla-9644' into release
2008-02-06PNP: disable Supermicro H8DCE motherboard resources that overlap SATA BARsBjorn Helgaas1-0/+43
Some Supermicro BIOSes describe a SATA PCI BAR as a motherboard resource. The PNP system driver claims motherboard resources, and this prevents the sata_nv driver from requesting it later. This patch disables the PNP0C01/PNP0C02 resources so they won't be claimed by the PNP system driver, so they'll available for sata_nv. This fixes the bugs below, where sata_nv detects only two out of four SATA drives. The signature includes dmesg lines similar to these: pnp: 00:09: iomem range 0xdfefc000-0xdfefcfff has been reserved pnp: 00:09: iomem range 0xdfefd000-0xdfefd3ff has been reserved pnp: 00:09: iomem range 0xdfefe000-0xdfefe3ff has been reserved PCI: Unable to reserve mem region #6:1000@dfefd000 for device 0000:80:07.0 sata_nv: probe of 0000:80:07.0 failed with error -16 PCI: Unable to reserve mem region #6:1000@dfefe000 for device 0000:80:08.0 sata_nv: probe of 0000:80:08.0 failed with error -16 References: https://bugzilla.redhat.com/show_bug.cgi?id=280641 https://bugzilla.redhat.com/show_bug.cgi?id=313491 http://lkml.org/lkml/2008/1/9/449 http://thread.gmane.org/gmane.linux.acpi.devel/27312 This is post-2.6.24 material. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06PNP: do not test PNP_DRIVER_RES_DO_NOT_CHANGE on suspend/resumeRene Herman1-5/+7
The PNP_DRIVER_RES_DO_NOT_CHANGE flag is meant to signify that the PNP core should not change resources for the device -- not that it shouldn't disable/enable the device on suspend/resume. ALSA ISAPnP drivers set PNP_DRIVER_RES_DO_NOT_CHANAGE (0x0001) through setting PNP_DRIVER_RES_DISABLE (0x0003). The latter including the former may in itself be considered rather unexpected but doesn't change that suspend/resume wouldn't seem to have any business testing the flag. As reported by Ondrej Zary for snd-cs4236, ALSA driven ISAPnP cards don't survive swsusp hibernation with the resume skipping setting the resources due to testing the flag -- the same test in the suspend path isn't enough to keep hibernation from disabling the card it seems. These tests were added (in 2005) by Piere Ossman in commit 68094e3251a664ee1389fcf179497237cbf78331, "alsa: Improved PnP suspend support" who doesn't remember why. This deletes them. Signed-off-by: Rene Herman <rene.herman@gmail.com> Tested-by: Ondrej Zary <linux@rainbow-software.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06isapnp driver semaphore to mutexDaniel Walker2-15/+17
Changed the isapnp semaphore to a mutex. [akpm@linux-foundation.org: no externs-in-c] [akpm@linux-foundation.org: build fix] Signed-off-by: Daniel Walker <dwalker@mvista.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06pnp: declare PNP option parsing functions as __initThomas Renninger3-39/+40
There are three kind of parse functions provided by PNP acpi/bios: - get current resources - set resources - get possible resources The first two may be needed later at runtime. The possible resource settings should never change dynamically. And even if this would make any sense (I doubt it), the current implementation only parses possible resource settings at early init time: -> declare all the option parsing __init [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Renninger <trenn@suse.de> Acked-By: Rene Herman <rene.herman@gmail.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06simplify pnp_activate_dev() and pnp_disable_dev() return valuesBjorn Helgaas1-4/+4
Make pnp_activate_dev() and pnp_disable_dev() return only 0 (success) or a negative error value, as pci_enable_device() and pci_disable_device() do. Previously they returned: 0: device was already active (or disabled) 1: we just activated (or disabled) device <0: -EBUSY or error from pnp_start_dev() (or pnp_stop_dev()) Now we return only 0 (device is active or disabled) or <0 (error). All in-tree callers either ignore the return values or check only for errors (negative values). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-30git-x86: drivers/pnp/pnpbios/bioscalls.c build fixAndrew Morton1-1/+4
drivers/pnp/pnpbios/bioscalls.c:64: warning: (near initialization for 'bad_bios_desc.<anonymous>') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-17pnpacpi: print resource shortage message only once (more)Len Brown1-0/+2
Wups, previous patch was ineffective in 2 cases. http://bugzilla.kernel.org/show_bug.cgi?id=9535 Signed-off-by: Len Brown <len.brown@intel.com> Reported-by: "Hartkopp, Oliver (K-EFE/E)" <oliver.hartkopp@volkswagen.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-12pnp: Failed to activate device 00:0a - Samsung P35 XVM 1600 IIIShaohua Li1-1/+1
PNP_WRITE requires protocol supports .set. If ACPI doesn't support _SRS, .set ismeanless, so PNP_WRITE. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-01-12pnpacpi: print resource shortage message only onceLen Brown1-4/+10
pnpacpi: exceeded the max number of IO resources: 40 While this message is a real error and should thus remain KERN_ERR (even a new dmesg line is seen as a regression by some, since it was not printed in 2.6.23...) it is certainly impolite to print this warning 50 times should you happen to have the oddball system with 90 io resources under a device... So print the warning just once. In 2.6.25 we'll get rid of the limits altogether and these warnings will vanish with them. http://bugzilla.kernel.org/show_bug.cgi?id=9535 Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-29drivers/pnp/resource.c: Add missing pci_dev_putJulia Lawall1-1/+3
There should be a pci_dev_put when breaking out of a loop that iterates over calls to pci_get_device and similar functions. This was fixed using the following semantic patch. // <smpl> @@ identifier d; type T; expression e; iterator for_each_pci_dev; @@ T *d; ... for_each_pci_dev(d) {... when != pci_dev_put(d) when != e = d ( return d; | + pci_dev_put(d); ? return ...; ) ...} // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Greg KH <greg@kroah.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29PNP: increase the maximum number of resourcesZhao Yakui1-2/+13
On some systems the number of resources(IO,MEM) returnedy by PNP device is greater than the PNP constant, for example motherboard devices. It brings that some resources can't be reserved and resource confilicts. This will cause PCI resources are assigned wrongly in some systems, and cause hang. This is a regression since we deleted ACPI motherboard driver and use PNP system driver. [akpm@linux-foundation.org: fix text and coding-style a bit] Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Thomas Renninger <trenn@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-20ACPI: fix two IRQ8 issues in IOAPIC modeShaohua Li1-0/+18
Use mp_irqs[] to get PNP device's interrupt polarity and trigger. There are two reasons to do this: 1. BIOS bug for PNP interrupt 2. BIOS explictly does override mp_irqs[] should cover all the cases. http://bugzilla.kernel.org/show_bug.cgi?id=5243 http://bugzilla.kernel.org/show_bug.cgi?id=7679 http://bugzilla.kernel.org/show_bug.cgi?id=9153 [lenb: fixed !IOAPIC and 64-bit !SMP builds] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-19Revert "Fix very high interrupt rate for IRQ8 (rtc) unless pnpacpi=off"Len Brown1-10/+0
This reverts commit 9cd8047b463f213c294f756119ac353312e7a152.
2007-10-17PNP: add debug message for adding new deviceBjorn Helgaas2-5/+24
Add PNP debug message when adding a device, remove similar PNPACPI message with less information. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: simplify PNPBIOS insert_deviceBjorn Helgaas1-14/+14
Hoist the struct pnp_dev alloc up into the function where it's used. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: use dev_info() in system driverBjorn Helgaas1-13/+16
Use dev_info() for a little consistency. Changes this: pnp: 00:01: ioport range 0xf50-0xf58 has been reserved pnp: 00:01: ioport range 0x408-0x40f has been reserved pnp: 00:01: ioport range 0x900-0x903 has been reserved to this: system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x900-0x903 has been reserved Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: use dev_info(), dev_err(), etc in coreBjorn Helgaas7-29/+31
If we have the struct pnp_dev available, we can use dev_info(), dev_err(), etc., to give a little more information and consistency. [akpm@linux-foundation.org: fix warning] Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: simplify PNP card error handlingBjorn Helgaas1-28/+29
No functional change; just return errors early instead of putting the main part of the function inside an "if" statement. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: remove null pointer checksBjorn Helgaas1-15/+0
Remove some null pointer checks. Null pointers in these areas indicate programming errors, and I think it's better to oops immediately rather than return an error that is easily ignored. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Fix very high interrupt rate for IRQ8 (rtc) unless pnpacpi=offKrzysztof Oledzki1-0/+10
Workaround for broken systems with BIOS that makes RTC interrupt level triggered and/or active low. See http://bugzilla.kernel.org/show_bug.cgi?id=5243 Based on the patch from Shaohua Li <shaohua.li@intel.com> Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Cc: "Li, Shaohua" <shaohua.li@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andi Kleen <ak@suse.de> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: don't fail device init if no DMA channel availableJan Beulich1-17/+12
Most drivers for devices supporting ISA DMA can operate without DMA as well (falling back zo PIO). Thus it seems inappropriate for PNP to fail device initialization in case none of the possible DMA channels are available. Instead, it should be left to the driver to decide what to do if request_dma() fails. The patch at once adjusts the code to account for the fact that pnp_assign_dma() now doesn't need to report failure anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17PNP: make pnpacpi_suspend handle errorsRafael J. Wysocki1-5/+10
pnpacpi_suspend() doesn't check the result returned by acpi_pm_device_sleep_state() before passing it to acpi_bus_set_power(), which may not be desirable.  Make it select the target power state of the device using its second argument if acpi_pm_device_sleep_state() fails. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Looks-ok-to: Pavel Machek <pavel@ucw.cz> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17pnp: avoid a small unlikely memory leak in proc_read_escd()Jesper Juhl1-2/+3
There's a small and unlikely memory leak in drivers/pnp/pnpbios/proc.c::proc_read_escd(). It's inside a sanity check, so it probably won't trigger often (if at all), however it *is* a potential leak and it's easy to avoid, so let's just fix it :) Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16[ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela5-6/+6
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-09drivers/firmware: const-ify DMI API and internalsJeff Garzik1-1/+1
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-09-11PNP: remove SMCf010 quirkBjorn Helgaas1-103/+0
If the quirk enables the SIR part of the SMCf010 device, the 8250 driver may claim it as a legacy ttyS device, which makes the legacy probe in the smsc-ircc2 driver fail. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-24PNP: remove null pointer checksBjorn Helgaas5-60/+2
Remove some null pointer checks. Null pointers in these areas indicate programming errors, and I think it's better to oops immediately rather than return an error that is easily ignored. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24PNP: remove MODULE infrastructureBjorn Helgaas2-88/+0
We don't support building any part of PNP as a module (*drivers* can be modules, of course, but the PNP infrastructure itself can not). Since MODULE will never be defined, remove the ifdefs and dead code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24ISAPNP: removed unused isapnp_detected and ISAPNP_DEBUGBjorn Helgaas1-7/+0
ISAPNP_DEBUG isn't used at all. isapnp_detected is set but never read. So remove them both. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24PNPACPI: remove unnecessary casts of "void *"Bjorn Helgaas1-8/+5
Remove unnecessary casts of void pointers. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24PNPACPI: simplify irq_flags()Bjorn Helgaas1-7/+4
No need for a temporary variable; just return the flags once we know them. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-08-24PNP: fix up after LindentBjorn Helgaas10-31/+32
More manual fixups after Lindent. No functional change. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Adam Belay <abelay@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-29ACPI: restore CONFIG_ACPI_SLEEPLen Brown1-0/+4
Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: Len Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26PNP: fix up after LindentBjorn Helgaas18-450/+248
These are manual fixups after running Lindent. No functional change. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26PNP: Lindent all source filesBjorn Helgaas18-1145/+1384
Run Lindent on all PNP source files. Produced by: $ quilt new pnp-lindent $ find drivers/pnp -name \*.[ch] | xargs quilt add $ quilt add include/linux/{pnp.h,pnpbios.h} $ scripts/Lindent drivers/pnp/*.c drivers/pnp/*/*.c include/linux/pnp*.h $ quilt refresh --sort Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <lenb@kernel.org> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25Pull auto-load-modules into release branchLen Brown1-7/+12
2007-07-23ACPI: autoload modules - Create ACPI alias interfaceThomas Renninger1-7/+12
Modify modpost (file2alias.c) to add acpi*:XYZ0001: alias in modules.alias like: grep acpi /lib/modules/2.6.22-rc4-default/modules.alias alias acpi*:SNY5001:* sony_laptop alias acpi*:SNY6001:* sony_laptop for e.g. the sony_laptop module. This module matches against all ACPI devices with a HID or CID of SNY5001 or SNY6001 Export an uevent and modalias sysfs file containing the string: [MODALIAS=]acpi:PNP0C0C: additional CIDs are concatenated at the end. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-22ACPI, PNP: hook ACPI D-state to PNP suspend/resumeShaohua Li2-0/+19
applied after Rafel's 'PM: Update global suspend and hibernation operations framework' patch set Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau1-2/+1
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18usermodehelper: Tidy up waitingJeremy Fitzhardinge1-1/+1
Rather than using a tri-state integer for the wait flag in call_usermodehelper_exec, define a proper enum, and use that. I've preserved the integer values so that any callers I've missed should still work OK. Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Andi Kleen <ak@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: David Howells <dhowells@redhat.com>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki1-0/+1
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16isapnp: remove pointless check of 'type' against 0 in isapnp_read_tag()Jesper Juhl1-2/+0
In drivers/pnp/isapnp/core.c::isapnp_read_tag() there is a test of 'type' being == 0 a bit down in the function. That test doesn't make any sense. If 'type' could indeed be NULL, then the test happens way too late as we'd already have tried to dereference the pointer earlier and looking at the callers it also turns out that there is no way type can ever actually be NULL. So the test is completely pointless and should just be removed. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>