Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fixes from Benson Leung:
"Two fixes:
- Fix locking and close a potential race condition in the new
wilco_ec driver.
- Fix a warning in cros_ec_debugfs on systems that do not support
console logging, such as the Asus C201"
* tag 'tag-chrome-platform-fixes-for-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: cancel/schedule logging work only if supported
platform/chrome: Fix locking pattern in wilco_ec_mailbox()
|
|
The following traceback was reported on ASUS C201, which does not support
console logging.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 361 at kernel/workqueue.c:3030 __flush_work+0x38/0x154
Modules linked in: snd_soc_hdmi_codec cros_ec_debugfs cros_ec_sysfs uvcvideo dw_hdmi_cec dw_hdmi_i2s_audio videobuf2_vmalloc cfg80211 gpio_charger rk_crypto rfkill videobuf2_memops videobuf2_v4l2 des_generic videobuf2_common ofpart m25p80 spi_nor tpm_i2c_infineon sbs_battery mtd tpm joydev cros_ec_dev coreboot_table evdev mousedev ip_tables x_tables [last unloaded: brcmutil]
CPU: 2 PID: 361 Comm: systemd-sleep Not tainted 5.1.0-rc1-1-ARCH+ #1
Hardware name: Rockchip (Device Tree)
[<c020e4b0>] (unwind_backtrace) from [<c020ac18>] (show_stack+0x10/0x14)
[<c020ac18>] (show_stack) from [<c07a3e04>] (dump_stack+0x7c/0x9c)
[<c07a3e04>] (dump_stack) from [<c0222748>] (__warn+0xd0/0xec)
[<c0222748>] (__warn) from [<c022279c>] (warn_slowpath_null+0x38/0x44)
[<c022279c>] (warn_slowpath_null) from [<c02365d0>] (__flush_work+0x38/0x154)
[<c02365d0>] (__flush_work) from [<c023786c>] (__cancel_work_timer+0x114/0x1a4)
[<c023786c>] (__cancel_work_timer) from [<bf33233c>] (cros_ec_debugfs_suspend+0x14/0x1c [cros_ec_debugfs])
[<bf33233c>] (cros_ec_debugfs_suspend [cros_ec_debugfs]) from [<c056a888>] (dpm_run_callback+0x64/0xcc)
[<c056a888>] (dpm_run_callback) from [<c056ad2c>] (__device_suspend+0x174/0x3a8)
[<c056ad2c>] (__device_suspend) from [<c056b9e0>] (dpm_suspend+0x174/0x1e0)
[<c056b9e0>] (dpm_suspend) from [<c026b3e0>] (suspend_devices_and_enter+0x6c/0x50c)
[<c026b3e0>] (suspend_devices_and_enter) from [<c026ba8c>] (pm_suspend+0x20c/0x274)
[<c026ba8c>] (pm_suspend) from [<c026a628>] (state_store+0x54/0x88)
[<c026a628>] (state_store) from [<c03cd2d0>] (kernfs_fop_write+0x114/0x180)
[<c03cd2d0>] (kernfs_fop_write) from [<c035d48c>] (__vfs_write+0x1c/0x154)
[<c035d48c>] (__vfs_write) from [<c035f9e8>] (vfs_write+0xb8/0x198)
[<c035f9e8>] (vfs_write) from [<c035fbc0>] (ksys_write+0x3c/0x74)
[<c035fbc0>] (ksys_write) from [<c0201000>] (ret_fast_syscall+0x0/0x4c)
Exception stack(0xe9365fa8 to 0xe9365ff0)
5fa0: 00000004 beef8b28 00000004 beef8b28 00000004 00000000
5fc0: 00000004 beef8b28 02319170 00000004 beef8b28 00000004 b6f3d900 beef8b74
5fe0: 0000006c beef8a98 b6c0adac b6c66534
---[ end trace f4ee5df14e8ea0ec ]---
If console logging is not supported, the work structure is never
initialized, resulting in the traceback. Calling cancel/schedule functions
conditionally fixes the problem.
While at it, also fix error handling in the probe function.
Reported-by: Urja Rannikko <urjaman@gmail.com>
Cc: Urja Rannikko <urjaman@gmail.com>
Fixes: 6fce0a2cf5a05 ("mfd / platform: cros_ec: Move debugfs attributes to its own driver")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
Before, ec->data_buffer could be written to from multiple
contexts at the same time. Since the ec is shared data,
it needs to be inside the mutex as well.
Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
- SPDX identifier cleanup for platform/chrome
- Cleanup series between mfd and chrome/platform, moving cros-ec
attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome
- Wilco EC driver
- Maintainership change to new group repository
* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: fix wilco-ec dependencies
platform/chrome: wilco_ec: Add RTC driver
platform/chrome: wilco_ec: Add support for raw commands in debugfs
platform/chrome: Add new driver for Wilco EC
platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
platform/chrome: cros_ec_sysfs: remove pr_fmt() define
platform/chrome: cros_ec_lightbar: remove pr_fmt() define
platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
platform/chrome: cros_ec_spi: switch to SPDX identifier
platform/chrome: cros_ec_proto: switch to SPDX identifier
platform/chrome: cros_ec_lpc: switch to SPDX identifier
platform/chrome: cros_ec_i2c: switch to SPDX identifier
platform/chrome: cros_ec_vbc: switch to SPDX identifier
platform/chrome: cros_ec_sysfs: switch to SPDX identifier
platform/chrome: cros_ec_lightbar: switch to SPDX identifier
platform/chrome: cros_ec_debugfs: switch to SPDX identifier
platform/chrome: cromeos_pstore: switch to SPDX identifier
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Darren Hart:
- use MODULE_DEVICE_TABLE across several wmi drivers, keeping
wmi_device_id and MODULE_ALIAS() declarations in sync
- add several Ideapad models to the no_hw_rfkill list
- add support for new Mellanox platforms, including new fan and LED
functionality
- address Dell keyboard backlight change event and power button release
issues
- update dell_rbu to use appropriate memory allocation mechanisms
- several small fixes and Ice Lake support for intel_pmc_core
- fix a suspend regression for Cherry Trail based devices in
intel_int0002_vgpio
- a few other routine fixes
* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
platform/x86: mlx-platform: Fix access mode for fan_dir attribute
platform/x86: mlx-platform: Add UID LED for the next generation systems
platform/x86: mlx-platform: Add extra CPLD for next generation systems
platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
modpost: file2alias: define size of alias
platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
platform/x86: intel_pmc_core: Add Package cstates residency info
platform/x86: intel_pmc_core: Add ICL platform support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.1 cycle:
Core changes:
- The big change this time around is the irqchip handling in the
qualcomm pin controllers, closely coupled with the gpiochip. This
rework, in a classic fall-between-the-chairs fashion has been
sidestepped for too long.
The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms
have been rewritten to use hierarchical irqchip. This creates the
base from which I intend to gradually pull support for hierarchical
irqchips into the gpiolib irqchip helpers to cut down on duplicate
code.
We have too many hacks in the kernel because people have been
working around the missing hierarchical irqchip for years, and once
it was there, noone understood it for a while. We are now slowly
adapting to using it.
This is why this pull requests include changes to MFD, SPMI,
IRQchip core and some ARM Device Trees pertaining to the Qualcomm
chip family. Since Qualcomm have so many chips and such large
deployments it is paramount that this platform gets this right, and
now it (hopefully) does.
- Core support for pull-up and pull-down configuration, also from the
device tree. When a simple GPIO chip supports an "off or on" pull-up
or pull-down resistor, we provide a way to set this up using
machine descriptors or device tree.
If more elaborate control of pull up/down (such as resistance shunt
setting) is required, drivers should be phased over to use pin
control. We do not yet provide a userspace ABI for this pull
up-down setting but I suspect the makers are going to ask for it
soon enough. PCA953x is the first user of this new API.
- The GPIO mockup driver has been revamped after some discussion
improving the IRQ simulator in the process.
The idea is to make it possible to use the mockup for both testing
and virtual prototyping, e.g. when you do not yet have a GPIO
expander to play with but really want to get something to develop
code around before hardware is available. It's neat. The blackbox
testing usecase is currently making its way into kernelci.
- ACPI GPIO core preserves non direction flags when updating flags.
- A new device core helper for devm_platform_ioremap_resource() is
funneled through the GPIO tree with Greg's ACK.
New drivers:
- TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O)
- Gateworks PLD GPIO driver (vaccumed up from OpenWrt)
- AMD G-Series PCH (Platform Controller Hub) GPIO driver.
- Fintek F81804 & F81966 subvariants.
- PCA953x now supports NXP PCAL6416.
Driver improvements:
- IRQ support on the Nintendo Wii (Hollywood) GPIO.
- get_direction() support for the MVEBU driver.
- Set the right output level on SAMA5D2.
- Drop the unused irq trigger setting on the Spreadtrum driver.
- Wakeup support for PCA953x.
- A slew of cleanups in the various Intel drivers"
* tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits)
gpio: gpio-omap: fix level interrupt idling
gpio: amd-fch: Set proper output level for direction_output
x86: apuv2: remove unused variable
gpio: pca953x: Use PCA_LATCH_INT
platform/x86: fix PCENGINES_APU2 Kconfig warning
gpio: pca953x: Fix dereference of irq data in shutdown
gpio: amd-fch: Fix type error found by sparse
gpio: amd-fch: Drop const from resource
gpio: mxc: add check to return defer probe if clock tree NOT ready
gpio: ftgpio: Register per-instance irqchip
gpio: ixp4xx: Add DT bindings
x86: pcengines apuv2 gpio/leds/keys platform driver
gpio: AMD G-Series PCH gpio driver
drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource()
gpio: tqmx86: Set proper output level for direction_output
gpio: sprd: Change to use SoC compatible string
gpio: sprd: Use SoC compatible string instead of wildcard string
gpio: of: Handle both enable-gpio{,s}
gpio: of: Restrict enable-gpio quirk to regulator-gpio
gpio: davinci: use devm_platform_ioremap_resource()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add STMPE ADC Input driver
- Add STMicroelectronics STPMIC1 Parent driver
- Add STMicroelectronics STPMIC1 OnKey Misc driver
- Add STMicroelectronics STPMIC1 Watchdog driver
- Add Cirrus Logic Lochnagar Parent driver
- Add TQ-Systems TQMX86 Parent driver
New Device Support:
- Add support for ADC to STMPE
New (or moved) Functionality:
- Move Lightbar functionality to its own driver; cros_ec_lightbar
- Move VBC functionality to its own driver; cros_ec_vbc
- Move VBC functionality to its own driver; cros_ec_vbc
- Move DebugFS functionality to its own driver; cros_ec_debugfs
- Move SYSFS functionality to its own driver; cros_ec_sysfs
- Add support for input voltage options; tps65218
Fixes:
- Use devm_* managed resources; cros_ec
- Device Tree documentation; stmpe, aspeed-lpc, lochnagar
- Trivial Clean-ups; stmpe
- Rip out broken modular code; aat2870-core, adp5520, as3711,
db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
- Kconfig fixups; INTEL_SOC_PMIC
- Improve error path; sm501, sec-core
- Use struct_size() helper; sm501
- Constify; at91-usart
- Use pointers instead of copying data; at91-usart
- Deliver proper return value; cros_ec_dev
- Trivial formatting/whitespace; sec-core"
* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
mfd: mxs-lradc: Mark expected switch fall-through
mfd: sec-core: Cleanup formatting to a consistent style
mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
mfd: intel-lpss: Move linux/pm.h to the local header
mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
mfd: at91-usart: No need to copy mfd_cell in probe
mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
mfd: lochnagar: Add initial binding documentation
dt-bindings: mfd: aspeed-lpc: Make parameter optional
mfd: sec-core: Return gracefully instead of BUG() if device cannot match
mfd: sm501: Use struct_size() in devm_kzalloc()
mfd: sm501: Fix potential NULL pointer dereference
mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
mfd: tps65218.c: Add input voltage options
mfd: wm8400-core: Make it explicitly non-modular
mfd: wm8350-core: Drop unused module infrastructure from non-modular code
mfd: wm8350-i2c: Make it explicitly non-modular
mfd: wm831x-core: Drop unused module infrastructure from non-modular code
...
|
|
The driver was newly introduced but the version that got merged
produces a harmless compiler warning:
drivers/platform/x86/pcengines-apuv2.c: In function 'apu_board_init':
drivers/platform/x86/pcengines-apuv2.c:211:6: error: unused variable 'rc' [-Werror=unused-variable]
Remove the evidently useless variable.
Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-By: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix Kconfig warning for PCENGINES_APU2 symbol:
WARNING: unmet direct dependencies detected for KEYBOARD_GPIO_POLLED
Depends on [n]: !UML && INPUT [=y] && INPUT_KEYBOARD [=n] && GPIOLIB [=y]
Selected by [y]:
- PCENGINES_APU2 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
Add INPUT_KEYBOARD dependency for KEYBOARD_GPIO_POLLED.
Add LEDS_CLASS dependency for LEDS_GPIO.
Fixes: f8eb0235f659 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Lenovo Ideapad S130-14IGM does not have a hardware radio switch.
Add it to no_hw_rfkill to enable wireless connections.
Signed-off-by: Felix Eckhofer <felix@eckhofer.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Fix access mode for "fan_dir" attribute from "write only" to
"read only". This attribute is exposed to leds-mlxreg driver.
The purpose of this attribute is to provide information about FAN
direction setting on the system (forward or backward).
It is relevant for the next generation systems MQMB7xx, MSN37xx,
MSN34xx, MSN38xx.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Add support for UID LED for the next generation systems MQMB7xx,
MSN37xx, MSN34xx, MSN38xx.
All these systems support UID LED control through the programmable
device.
The UID LED is to be exposed to leds-mlxreg driver.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Add support for CPLD4 for the next generation systems MQMB7xx, MSN37xx,
MSN34xx, MSN38xx.
All these systems are equipped with four programmable device.
The version of this new device is to be exposed to sysfs through
mlxreg-io register.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
MODULE_ALIAS()
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
MODULE_ALIAS()
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
MODULE_ALIAS()
WMI drivers can if they have specified an array of struct wmi_device_id
use the MODULE_DEVICE_TABLE() macro to automatically generate the
appropriate MODULE_ALIAS() output. Thus avoiding to keep both the array
of struct wmi_device_id and the MODULE_ALIAS() declaration(s) in sync.
Change driver to use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS().
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
In preparation for adding WMI support to MODULE_DEVICE_TABLE() move the
definition of struct wmi_device_id to mod_devicetable.h and inline
guid_string in the struct.
Changing guid_string to an inline char array changes the loop conditions
when looping over an array of struct wmi_device_id. Therefore update
wmi_dev_match()'s loop to check for an empty guid_string instead of a
NULL pointer.
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
[dvhart: Move UUID_STRING_LEN define to this patch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big USB/PHY driver pull request for 5.1-rc1.
The usual set of gadget driver updates, phy driver updates, xhci
updates, and typec additions. Also included in here are a lot of small
cleanups and fixes and driver updates where needed.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
wusb: Remove unnecessary static function ckhdid_printf
usb: core: make default autosuspend delay configurable
usb: core: Fix typo in description of "authorized_default"
usb: chipidea: Refactor USB PHY selection and keep a single PHY
usb: chipidea: Grab the (legacy) USB PHY by phandle first
usb: chipidea: imx: set power polarity
dt-bindings: usb: ci-hdrc-usb2: add property power-active-high
usb: chipidea: imx: remove unused header files
usb: chipidea: tegra: Fix missed ci_hdrc_remove_device()
usb: core: add option of only authorizing internal devices
usb: typec: tps6598x: handle block writes separately with plain-I2C adapters
usb: xhci: Fix for Enabling USB ROLE SWITCH QUIRK on INTEL_SUNRISEPOINT_LP_XHCI
usb: xhci: fix build warning - missing prototype
usb: xhci: dbc: Fixing typo error.
usb: xhci: remove unused member 'parent' in xhci_regset struct
xhci: tegra: Prevent error pointer dereference
USB: serial: option: add Telit ME910 ECM composition
usb: core: Replace hardcoded check with inline function from usb.h
usb: core: skip interfaces disabled in devicetree
usb: typec: mux: remove redundant check on variable match
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver patch pull request for 5.1-rc1.
The largest thing by far is the new habanalabs driver for their AI
accelerator chip. For now it is in the drivers/misc directory but will
probably move to a new directory soon along with other drivers of this
type.
Other than that, just the usual set of individual driver updates and
fixes. There's an "odd" merge in here from the DRM tree that they
asked me to do as the MEI driver is starting to interact with the i915
driver, and it needed some coordination. All of those patches have
been properly acked by the relevant subsystem maintainers.
All of these have been in linux-next with no reported issues, most for
quite some time"
* tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits)
habanalabs: adjust Kconfig to fix build errors
habanalabs: use %px instead of %p in error print
habanalabs: use do_div for 64-bit divisions
intel_th: gth: Fix an off-by-one in output unassigning
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: use NULL to initialize array of pointers
habanalabs: fix little-endian<->cpu conversion warnings
habanalabs: soft-reset device if context-switch fails
habanalabs: print pointer using %p
habanalabs: fix memory leak with CBs with unaligned size
habanalabs: return correct error code on MMU mapping failure
habanalabs: add comments in uapi/misc/habanalabs.h
habanalabs: extend QMAN0 job timeout
habanalabs: set DMA0 completion to SOB 1007
habanalabs: fix validation of WREG32 to DMA completion
habanalabs: fix mmu cache registers init
habanalabs: disable CPU access on timeouts
habanalabs: add MMU DRAM default page mapping
habanalabs: Dissociate RAZWI info from event types
misc/habanalabs: adjust Kconfig to fix build errors
...
|
|
Add touchscreen info for the CHUWUI Hi10 Air tablet.
Signed-off-by: Christian Oder <me@myself5.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This platform doesn't have hardware switch for rfkill, so add it to
no_hw_rfkill list to prevent wireless gets hard-blocked.
BugLink: https://bugs.launchpad.net/bugs/1818204
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Lenovo Yoga C930 does not have a physical hw radio switch which
makes ideapad_laptop to incorrectly disable radio while it should
be working fine. Adding it to the no_hw_rfkill_list makes
wireless available again without having to unload the module.
Signed-off-by: Hugo Trovao <htrovao@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When CROS_EC_LPC is set to =m, we get a link failure for a
builtin wilco-ec module:
drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_remove':
core.c:(.text+0x26): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/core.o: In function `wilco_ec_probe':
core.c:(.text+0x18c): undefined reference to `cros_ec_lpc_mec_init'
core.c:(.text+0x224): undefined reference to `cros_ec_lpc_mec_destroy'
drivers/platform/chrome/wilco_ec/mailbox.o: In function `wilco_ec_mailbox':
mailbox.c:(.text+0x104): undefined reference to `cros_ec_lpc_io_bytes_mec'
The problem with the existing CROS_EC_LPC_MEC dependency is that this
is only for a 'bool' symbol, so the information about the exported
functions being in a module is lost on the way, and we actually have
to depend on both CROS_EC_LPC and CROS_EC_LPC_MEC.
Fixes: 7b3d4f44abf0 ("platform/chrome: Add new driver for Wilco EC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
* acpica:
ACPICA: Update version to 20190215
ACPI/ACPICA: Trivial: fix spelling mistakes and fix whitespace formatting
ACPICA: ACPI 6.3: add GTDT Revision 3 support
ACPICA: ACPI 6.3: HMAT updates
ACPICA: ACPI 6.3: PPTT add additional fields in Processor Structure Flags
ACPICA: ACPI 6.3: add Error Disconnect Recover Notification value
ACPICA: ACPI 6.3: MADT: add support for statistical profiling in GICC
ACPICA: ACPI 6.3: add PCC operation region support for AML interpreter
ACPICA: ACPI 6.3: SRAT: add Generic Affinity Structure subtable
ACPICA: ACPI 6.3: Add Trigger order to PCC Identifier structure in PDTT
ACPICA: ACPI 6.3: Adding predefined methods _NBS, _NCH, _NIC, _NIH, and _NIG
ACPICA: Update/clarify messages for control method failures
ACPICA: Debugger: Fix possible fault with the "test objects" command
ACPICA: Interpreter: Emit warning for creation of a zero-length op region
ACPICA: Remove legacy module-level code support
ACPICA: Get rid of acpi_sleep_dispatch()
ACPICA: Update version to 20190108
ACPICA: All acpica: Update copyrights to 2019
ACPICA: acpiexec: Add option to dump extra info for memory leaks
ACPICA: Convert more ACPI errors to firmware errors
|
|
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some platforms such as HP Elite-x2-1013-g3, the platform BIOS
enforces XTAL to remain off before S0ix state can be achieved. This may
not be optimum when we want to enable use cases like Low Power Audio,
Wake on Voice etc which always need 24mhz clock.
This introduces a new quirk to allow S0ix entry when all other
conditions except for XTAL clock are good on a given platform. The extra
power consumed by XTAL clock is about 2mw but it saves much more
platform power compared to the system that remains in just PC10.
Link: https://bit.ly/2UmnrFf
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201579
Tested-by: "David E. Box" <david.e.box@linux.intel.com>
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
This patch introduces a new debugfs entry to read current Package
cstate residency counters. A similar variant of this patch was discussed
earlier "https://patchwork.kernel.org/patch/9908563/" but didn't make it
into mainline for various reasons. Current version only adds debugfs
entry which is quite useful for S0ix debug but excludes the exported API
that was there in initial version. Though there are tools like turbostat
and socwatch which can also show this info but sometimes its more
practical to have it here as it's hard to switch between various tools for
S0ix debug when pmc_core driver is the primary debug tool. Internal and
external customers have requested for this patch to be included in the
PMC driver on many occasions and Google Chrome OS team has already included
it in their builds. This becomes handy when requesting logs from external
customers who may not always have above mentioned tools in their integrated
kernel builds.
Package cstate residency MSRs provide useful debug information about
system idle states. In idle states system must enter deeper Package
cstates. Package cstates depend not only on Core cstates but also on
various IP block's power gating status and LTR values.
For Intel Core SoCs Package C10 entry is a must for deeper sleep states
such as S0ix. "Suspend-to-idle" should ideally take this path:
PC0 -> PC10 -> S0ix. For S0ix debug, its logical to check for
Package C10 residency first if for some reason system fails to enter S0ix.
Please refer to this link for MSR details:
https://software.intel.com/sites/default/files/managed/22/0d/335592-sdm-vol-4.pdf
Usage:
cat /sys/kernel/debug/pmc_core/package_cstate_show
Package C2 : 0xec2e21735f
Package C3 : 0xc30113ba4
Package C6 : 0x9ef4be15c5
Package C7 : 0x1e011904
Package C8 : 0x3c5653cfe5a
Package C9 : 0x0
Package C10 : 0x16fff4289
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Icelake can resue most of the CNL PCH IPs as they are mostly similar.
This patch enables the PMC Core driver for ICL family.
It also addresses few other minor issues like upper case conversions and
some tab alignments.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-and-tested-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
INTEL_CPU_FAM6() macro provides better abstraction and reduces code size
so use it instead of custom grown ICPU().
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
The register (SLP_S0_RES) at offset slp_s0_offset is a 32 bit register.
The pmc_core_adjust_slp_s0_step() could overflow the u32 value while
returning it after adjusting the step. Thus change to u64, this is
already accounted for in debugfs attribute (that wants to output a
64 bit value).
Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
We need to ensure rbu_data.lock is always held on return.
Fixes: 289790a3ea94 ("platform/x86: dell_rbu: stop abusing the DMA API")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Commit 0252894f53fc2693672308 added the Legion Y530 to the no_hw_rfkill
list, but missed a Y530 variant using the nvidia 1060 graphics card.
I have had to blacklist ideapad-laptop as a result to get Wi-Fi working.
dmidecode info:
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: LENOVO
Product Name: 81LB
Version: Lenovo Legion Y530-15ICH-1060
Serial Number: <snip>
UUID: <snip>
Wake-up Type: Power Switch
SKU Number: LENOVO_MT_81LB_BU_idea_FM_Legion Y530-15ICH-1060
Family: Legion Y530-15ICH-1060
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Fix the following KASAN warning produced when booting a 64-bit kernel:
[ 13.334750] BUG: KASAN: stack-out-of-bounds in find_first_bit+0x19/0x70
[ 13.342166] Read of size 8 at addr ffff880235067178 by task kworker/2:1/42
[ 13.342176] CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 4.20.0-rc1+ #106
[ 13.342179] Hardware name: Mellanox Technologies Ltd. MSN2740/Mellanox x86 SFF board, BIOS 5.6.5 06/07/2016
[ 13.342190] Workqueue: events deferred_probe_work_func
[ 13.342194] Call Trace:
[ 13.342206] dump_stack+0xc7/0x15b
[ 13.342214] ? show_regs_print_info+0x5/0x5
[ 13.342220] ? kmsg_dump_rewind_nolock+0x59/0x59
[ 13.342234] ? _raw_write_lock_irqsave+0x100/0x100
[ 13.351593] print_address_description+0x73/0x260
[ 13.351603] kasan_report+0x260/0x380
[ 13.351611] ? find_first_bit+0x19/0x70
[ 13.351619] find_first_bit+0x19/0x70
[ 13.351630] mlxreg_hotplug_work_handler+0x73c/0x920 [mlxreg_hotplug]
[ 13.351639] ? __lock_text_start+0x8/0x8
[ 13.351646] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351656] ? mlxreg_hotplug_remove+0x1e0/0x1e0 [mlxreg_hotplug]
[ 13.351663] ? regmap_volatile+0x40/0xb0
[ 13.351668] ? regcache_write+0x4c/0x90
[ 13.351676] ? mlxplat_mlxcpld_reg_write+0x24/0x30 [mlx_platform]
[ 13.351681] ? _regmap_write+0xea/0x220
[ 13.351688] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351696] ? devm_add_action+0x70/0x70
[ 13.351701] ? mutex_unlock+0x1d/0x40
[ 13.351710] mlxreg_hotplug_probe+0x82e/0x989 [mlxreg_hotplug]
[ 13.351723] ? mlxreg_hotplug_work_handler+0x920/0x920 [mlxreg_hotplug]
[ 13.351731] ? sysfs_do_create_link_sd.isra.2+0xf4/0x190
[ 13.351737] ? sysfs_rename_link_ns+0xf0/0xf0
[ 13.351743] ? devres_close_group+0x2b0/0x2b0
[ 13.351749] ? pinctrl_put+0x20/0x20
[ 13.351755] ? acpi_dev_pm_attach+0x2c/0xd0
[ 13.351763] platform_drv_probe+0x70/0xd0
[ 13.351771] really_probe+0x480/0x6e0
[ 13.351778] ? device_attach+0x10/0x10
[ 13.351784] ? __lock_text_start+0x8/0x8
[ 13.351790] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351797] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.351806] ? __driver_attach+0x190/0x190
[ 13.351812] driver_probe_device+0x17d/0x1a0
[ 13.351819] ? __driver_attach+0x190/0x190
[ 13.351825] bus_for_each_drv+0xd6/0x130
[ 13.351831] ? bus_rescan_devices+0x20/0x20
[ 13.351837] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351845] __device_attach+0x18c/0x230
[ 13.351852] ? device_bind_driver+0x70/0x70
[ 13.351859] ? __mutex_lock_slowpath+0x10/0x10
[ 13.351866] bus_probe_device+0xea/0x110
[ 13.351874] deferred_probe_work_func+0x1c9/0x290
[ 13.351882] ? driver_deferred_probe_add+0x1d0/0x1d0
[ 13.351889] ? preempt_notifier_dec+0x20/0x20
[ 13.351897] ? read_word_at_a_time+0xe/0x20
[ 13.351904] ? strscpy+0x151/0x290
[ 13.351912] ? set_work_pool_and_clear_pending+0x9c/0xf0
[ 13.351918] ? __switch_to_asm+0x34/0x70
[ 13.351924] ? __switch_to_asm+0x40/0x70
[ 13.351929] ? __switch_to_asm+0x34/0x70
[ 13.351935] ? __switch_to_asm+0x40/0x70
[ 13.351942] process_one_work+0x5cc/0xa00
[ 13.351952] ? pwq_dec_nr_in_flight+0x1e0/0x1e0
[ 13.351960] ? pci_mmcfg_check_reserved+0x80/0xb8
[ 13.351967] ? run_rebalance_domains+0x250/0x250
[ 13.351980] ? stack_access_ok+0x35/0x80
[ 13.351986] ? deref_stack_reg+0xa1/0xe0
[ 13.351994] ? schedule+0xcd/0x250
[ 13.352000] ? worker_enter_idle+0x2d6/0x330
[ 13.352006] ? __schedule+0xeb0/0xeb0
[ 13.352014] ? fork_usermode_blob+0x130/0x130
[ 13.352019] ? mutex_lock+0xa7/0x100
[ 13.352026] ? _raw_spin_lock_irq+0x98/0xf0
[ 13.352032] ? _raw_read_unlock_irqrestore+0x30/0x30
[ 13.352037] i2c i2c-2: Added multiplexed i2c bus 11
[ 13.352043] worker_thread+0x181/0xa80
[ 13.352052] ? __switch_to_asm+0x34/0x70
[ 13.352058] ? __switch_to_asm+0x40/0x70
[ 13.352064] ? process_one_work+0xa00/0xa00
[ 13.352070] ? __switch_to_asm+0x34/0x70
[ 13.352076] ? __switch_to_asm+0x40/0x70
[ 13.352081] ? __switch_to_asm+0x34/0x70
[ 13.352086] ? __switch_to_asm+0x40/0x70
[ 13.352092] ? __switch_to_asm+0x34/0x70
[ 13.352097] ? __switch_to_asm+0x40/0x70
[ 13.352105] ? __schedule+0x3d6/0xeb0
[ 13.352112] ? migrate_swap_stop+0x470/0x470
[ 13.352119] ? save_stack+0x89/0xb0
[ 13.352127] ? kmem_cache_alloc_trace+0xe5/0x570
[ 13.352132] ? kthread+0x59/0x1d0
[ 13.352138] ? ret_from_fork+0x35/0x40
[ 13.352154] ? __schedule+0xeb0/0xeb0
[ 13.352161] ? remove_wait_queue+0x150/0x150
[ 13.352169] ? _raw_write_lock_irqsave+0x80/0x100
[ 13.352175] ? __lock_text_start+0x8/0x8
[ 13.352183] ? process_one_work+0xa00/0xa00
[ 13.352188] kthread+0x1a4/0x1d0
[ 13.352195] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 13.352202] ret_from_fork+0x35/0x40
[ 13.353879] The buggy address belongs to the page:
[ 13.353885] page:ffffea0008d419c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 13.353890] flags: 0x2ffff8000000000()
[ 13.353897] raw: 02ffff8000000000 ffffea0008d419c8 ffffea0008d419c8 0000000000000000
[ 13.353903] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 13.353905] page dumped because: kasan: bad access detected
[ 13.353908] Memory state around the buggy address:
[ 13.353912] ffff880235067000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353917] ffff880235067080: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 04
[ 13.353921] >ffff880235067100: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 f2 f2 f2 f2 04
[ 13.353923] ^
[ 13.353927] ffff880235067180: f2 f2 f2 f2 f2 f2 f2 04 f2 f2 f2 00 00 00 00 00
[ 13.353931] ffff880235067200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 13.353933] ==================================================================
The warning is caused by the below loop:
for_each_set_bit(bit, (unsigned long *)&asserted, 8) {
while "asserted" is declared as 'unsigned'.
The casting of 32-bit unsigned integer pointer to a 64-bit unsigned long
pointer. There are two problems here.
It causes the access of four extra byte, which can corrupt memory
The 32-bit pointer address may not be 64-bit aligned.
The fix changes variable "asserted" to "unsigned long".
Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
In the function wmi_dev_match() the variable id is dereferenced without
first performing a NULL check. The variable can for example be NULL if
a WMI driver is registered without specifying the id_table field in
struct wmi_driver.
Add a NULL check and return that the driver can't handle the device if
the variable is NULL.
Fixes: 844af950da94 ("platform/x86: wmi: Turn WMI into a bus driver")
Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
For some odd reason dell_rbu actually seems to want the physical and
not a bus address for the allocated buffer. Lets assume that actually
is correct given that it is BIOS-related and that is a good source
of insanity. In that case we should not use dma_alloc_coherent with
a NULL device to allocate memory, but use GFP_DMA32 to stay under
the 32-bit BIOS limit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
R720-15IKBN
Commit ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER
R720-15IKBN to no_hw_rfkill_list") added
DMI_MATCH(DMI_BOARD_NAME, "80WW")
for Lenovo RESCUER R720-15IKBN.
But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN,
thus cause Wireless LAN still be hard blocked.
On Lenovo RESCUER R720-15IKBN:
~$ cat /sys/class/dmi/id/sys_vendor
LENOVO
~$ cat /sys/class/dmi/id/board_name
Provence-5R3
~$ cat /sys/class/dmi/id/product_name
80WW
~$ cat /sys/class/dmi/id/product_version
Lenovo R720-15IKBN
So on Lenovo RESCUER R720-15IKBN:
DMI_SYS_VENDOR should match "LENOVO",
DMI_BOARD_NAME should match "Provence-5R3",
DMI_PRODUCT_NAME should match "80WW",
DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN".
Fix it, and in according with other entries in no_hw_rfkill_list,
use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME.
Fixes: ae7c8cba3221 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list")
Signed-off-by: Yang Fan <nullptr.cpp@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
GUID
hid-asus depends on asus-wmi through the asus_wmi_evaluate_method. Before
this commit asus-wmi, and thus hid-asus, could not be loaded on non-Asus
systems. This breaks using Asus bluetooth keyboards such as the Asus
T100CHI keyboard with non Asus systems.
This commit fixes this by allowing asus-wmi to load on systems without the
Asus Management GUID.
This is safe to do since all asus-wmi sub drivers use
asus_wmi_register_driver which also checks for the GUID.
This commit also improves the error messages in asus_wmi_register_driver
to include "ASUS" in their description to make them more clear. This is
important since we now rely on those errors when loaded on systems without
the Asus Management GUID.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Driver for PCengines APUv2 board's front LEDs and Button,
which are attached to AMD PCH GPIOs. Due to lack of dedicated
ACPI entry, detecting the board via DMI.
Cc: linux-gpio@vger.kernel.org
Cc: linus.walleij@linaro.org
Cc: bgolaszewski@baylibre.com
Cc: dvhart@infradead.org
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.
The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.
To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
Add a debugfs attribute that allows sending raw commands to the EC.
This is useful for development and debug but should not be enabled
in a production environment.
To test:
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18.......
Get the EC firmware build date
First send the request command
> echo 00 f0 38 00 03 00 > raw
Then read the result. "12/21/18" is in the middle of the response
> cat raw
00 31 32 2f 32 31 2f 31 38 00 00 0f 01 00 01 00 .12/21/18.......
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix off-by-one error in wilco_ec/debugfs.c]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
This EC is an incompatible variant of the typical Chrome OS embedded
controller. It uses the same low-level communication and a similar
protocol with some significant differences. The EC firmware does
not support the same mailbox commands so it is not registered as a
cros_ec device type. This commit exports the wilco_ec_mailbox()
function so that other modules can use it to communicate with the EC.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
[Fix the sparse warning: symbol 'wilco_ec_transfer' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
[Fix Kconfig dependencies for wilco_ec]
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
Recently introduced commit "platform/x86: intel_pmc_core: Show Latency
Tolerance info <51337cd94d18184601ac0fb4cf1a02b8bbabc3d7> skipped the
LTR from a reserved IP. Though this doesn't cause any functional issue
but it is needed for the consumers of "ltr_ignore" as the index printing
for "ltr_show" is missing. For example, w/o this change, a user that wants
to ignore LTR from ME would do something like
echo 5 > ltr_ignore
but the index for ME is 6. Printing a reserved IP helps to properly
calculate LTR ignore offsets.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
File permissions for ltr_show attribute should be similar to other
debugfs attributes created by this driver. '0644' should be used only
when there is a write operation desired such as for ltr_ignore.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2eb150558bb7 ("platform/x86: intel_pmc_core: Show Latency Tolerance info")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The new mux connection naming scheme is now in use, so
dropping the connections still using the old names. From now
on the same connection description named "mode-switch" is
used with both the port and the alternate modes, so on CHT
the DP alt mode will use the same connection as the port to
get a handle to the mux device.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding new connections with for the muxes with new
identifiers. The old connection are left in for now.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to allow this code to be re-used, remove the dependency
on the rest of the cros_ec code from the cros_ec_lpc_mec functions.
Instead of using a hardcoded register base address of 0x800 have
this be passed in to cros_ec_lpc_mec_init(). The existing cros_ec
use case now passes in the 0x800 base address this way.
There are some error checks that happen in cros_ec_lpc_mec_in_range()
that probably shouldn't be there, as they are checking kernel-space
callers and not user-space input. However, we'll just do the refactor in
this patch, and in a future patch might remove this error checking and
fix all the instances of code that calls this.
There's a similar problem in cros_ec_lpc_read_bytes(), where we return a
checksum, but on error just return 0. This should probably be changed so
that it returns int, but we don't want to have to mess with all the
calling code for this fix. Maybe we'll come back through later and fix
this.
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|