summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2017-07-06Merge tag 'pinctrl-v4.13-1' of ↵Linus Torvalds90-6658/+13076
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the big bulk of pin control changes for the v4.13 series: Core: - The documentation is moved over to RST. - We now have agreed bindings for enabling input and output buffers without actually enabling input and/or output on a pin. We are chiseling out some details of pin control electronics. New drivers: - ZTE ZX - Renesas RZA1 - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree to use this pin controller and consolidate earlier spread out code. - Microschip MCP23S08: this driver is migrated from the GPIO subsystem and totally rewritten to use proper pin control. All users are switched over. New subdrivers: - Renesas R8A7743 and R8A7745. - Allwinner Sunxi A83T R_PIO. - Marvell MVEBU Armada CP110 and AP806. - Intel Cannon Lake PCH. - Qualcomm IPQ8074. Notable improvements: - IRQ support on the Marvell MVEBU Armada 37xx. - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM. - Rockchip driver now supports iomux-route switching for RK3228, RK3328 and RK3399. - Rockchip A10 and A20 are merged into a single driver. - STM32 has improved GPIO support. - Samsung Exynos drivers are split per ARMv7 and ARMv8. - Marvell MVEBU is converted to use regmap for register access. Maintenance: - Several Renesas SH-PFC refactorings and updates. - Serious code size cut for Mediatek MT7623. - Misc janitorial and MAINTAINERS fixes" * tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits) pinctrl: samsung: Remove bogus irq_[un]mask from resource management pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static pinctrl: rza1: Remove unneeded wrong check for wrong variable pinctrl: qcom: Add ipq8074 pinctrl driver pinctrl: freescale: imx7d: make of_device_ids const. pinctrl: DT: extend the pinmux property to support integers array pinctrl: generic: Add output-enable property pinctrl: armada-37xx: Fix number of pin in sdio_sb pinctrl: armada-37xx: Fix uart2 group selection register mask pinctrl: bcm2835: Avoid warning from __irq_do_set_handler pinctrl: sh-pfc: r8a7795: Add PWM support MAINTAINERS: Add Qualcomm pinctrl drivers section arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header dt-bindings: pinctrl: Add RZ/A1 bindings doc pinctrl: Renesas RZ/A1 pin and gpio controller pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups pinctrl.txt: move it to the driver-api book pinctrl: ingenic: checking for NULL instead of IS_ERR() pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20 pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11 ...
2017-06-30pinctrl: samsung: Remove bogus irq_[un]mask from resource managementThomas Gleixner1-4/+0
The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-30pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops staticColin Ian King1-2/+2
structures rza1_gpiochip_template and rza1_pinmux_ops do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rza1_gpiochip_template' was not declared. Should it be static? symbol 'rza1_pinmux_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-30pinctrl: rza1: Remove unneeded wrong check for wrong variableGeert Uytterhoeven1-3/+0
Depending on compiler version: drivers/pinctrl/pinctrl-rza1.c: In function ‘rza1_pinctrl_probe’: drivers/pinctrl/pinctrl-rza1.c:1260:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (ret) ^ Indeed, the result returned by platform_get_resource() was stored in "res", not "ret". In addition, the correct error check would be "if (!res)", as platform_get_resource() does not return an error code, but returns NULL on failure. However, as devm_ioremap_resource() verifies the validity of the passed resource pointer anyway, the check can just be removed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 5a49b644b3075f88 ("pinctrl: Renesas RZ/A1 pin and gpio controller") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: qcom: Add ipq8074 pinctrl driverVaradarajan Narayanan3-0/+1087
Add initial pinctrl driver to support pin configuration with pinctrl framework for ipq8074. Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'sh-pfc-for-v4.13-tag2' of ↵Linus Walleij5-0/+1743
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.13 (take two) - Add SCIF1 and SCIF2 pin groups for R-Car V2H, - Add EtherAVB, DU parallel RGB output, and PWM pin groups for R-Car H3 ES2.0, - Add pin and gpio controller support for RZ/A1.
2017-06-29Revert "pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chip"Brian Norris1-40/+4
This reverts commit 88bb94216f59e10802aaf78c858a4146085faf18. It introduced a new CONFIG_DEBUG_ATOMIC_SLEEP warning in v4.12-rc1: [ 7226.716713] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:238 [ 7226.716716] in_atomic(): 0, irqs_disabled(): 0, pid: 1708, name: bash [ 7226.716722] CPU: 1 PID: 1708 Comm: bash Not tainted 4.12.0-rc6+ #1213 [ 7226.716724] Hardware name: Google Kevin (DT) [ 7226.716726] Call trace: [ 7226.716738] [<ffffff8008089928>] dump_backtrace+0x0/0x24c [ 7226.716743] [<ffffff8008089b94>] show_stack+0x20/0x28 [ 7226.716749] [<ffffff8008371370>] dump_stack+0x90/0xb0 [ 7226.716755] [<ffffff80080cd2a0>] ___might_sleep+0x10c/0x124 [ 7226.716760] [<ffffff80080cd330>] __might_sleep+0x78/0x88 [ 7226.716765] [<ffffff800879e210>] mutex_lock+0x2c/0x64 [ 7226.716771] [<ffffff80083ad678>] rockchip_irq_bus_lock+0x30/0x3c [ 7226.716777] [<ffffff80080f6d40>] __irq_get_desc_lock+0x78/0x98 [ 7226.716782] [<ffffff80080f7e6c>] irq_set_irq_wake+0x44/0x12c [ 7226.716787] [<ffffff8008486e18>] dev_pm_arm_wake_irq+0x4c/0x58 [ 7226.716792] [<ffffff800848b80c>] device_wakeup_arm_wake_irqs+0x3c/0x58 [ 7226.716796] [<ffffff80084896fc>] dpm_suspend_noirq+0xf8/0x3a0 [ 7226.716800] [<ffffff80080f1384>] suspend_devices_and_enter+0x1a4/0x9a8 [ 7226.716803] [<ffffff80080f21ec>] pm_suspend+0x664/0x6a4 [ 7226.716807] [<ffffff80080f04d8>] state_store+0xd4/0xf8 ... It was reported on -rc1, and it's still not fixed in -rc6, so it should just be reverted. Cc: John Keeping <john@metanate.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: freescale: imx7d: make of_device_ids const.Arvind Yadav1-3/+3
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: generic: Add output-enable propertyJacopo Mondi1-0/+3
Add output-enable generic pin configuration property. This properties allows enabling/disabling pin's output capabilities without actually driving any value on the line. Acked-by: Rob Herring <robh@kernel.org> [Added inline elaborations on buffer enabling/disabling] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29Merge tag 'v4.12-rc7' into develLinus Walleij7-97/+80
Linux 4.12-rc7
2017-06-29pinctrl: armada-37xx: Fix number of pin in sdio_sbGregory CLEMENT1-2/+2
The sdio_sb group is composed of 6 pins and not 5. Reported-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: armada-37xx: Fix uart2 group selection register maskKen Ma1-2/+3
If north bridge selection register bit1 is clear, pins [10:8] are for SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn and CTSn, so bit1 should be added to uart2 group and it must be set for both "gpio" and "uart" functions of uart2 group. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: bcm2835: Avoid warning from __irq_do_set_handlerStefan Wahren1-0/+4
We get a warning during boot with enabled EARLY_PRINTK that we try to set a irq_chip without data. This is caused by ignoring the return value of irq_of_parse_and_map(). So avoid calling gpiochip_set_chained_irqchip() in error case. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 85ae9e512f43 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-26pinctrl: sh-pfc: r8a7795: Add PWM supportLaurent Pinchart1-0/+153
Add pinctrl support for the PWM[0-6] pins. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-06-23pinctrl: Renesas RZ/A1 pin and gpio controllerJacopo Mondi3-0/+1323
Add combined gpio and pin controller driver for Renesas RZ/A1 r7s72100 SoC. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-06-21pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groupsUlrich Hecht1-0/+55
Add SCIF1 and SCIF2 pin groups to the R8A7792 PFC driver. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-06-20pinctrl: ingenic: checking for NULL instead of IS_ERR()Dan Carpenter1-2/+2
devm_pinctrl_register() returns error pointers, it doesn't return NULL. Fixes: b5c23aa46537 ("pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20Masahiro Yamada1-189/+194
The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 336306ee1f2d ("pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11Masahiro Yamada1-172/+192
The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 70f2f9c4cf25 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-20Merge tag 'samsung-pinctrl-4.13' of ↵Linus Walleij10-1197/+1269
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers update for v4.13: 1. Split drivers per ARMv7 and ARMv8 architectures because there is no need to compile everything on each of them. 2. Fix for possible NULL-pointer dereference after memory allocation failure. 3. Cleanups (silencing cast warnings, constify, removal of unneeded casts, removal of modular boiler-plate).
2017-06-16pinctrl: sh-pfc: r8a7795: Add DU parallel RGB output supportLaurent Pinchart1-0/+101
The H3 ES1.x and H3 ES2.0 have identical pinmuxing for the parallel RGB output support. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-06-16pinctrl: mvebu: add driver for Armada CP110 pinctrlHanna Hawa3-0/+692
This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: add driver for Armada AP806 pinctrlHanna Hawa3-0/+145
This commit adds a pinctrl driver for the pin-muxing controller found in the AP806 part of the Marvell Armada 7K and 8K SoCs. Its register interface is compatible with the one used by previous mvebu pin controllers, so the common logic in drivers/pinctrl/mvebu/pinctrl-mvebu.c is used. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl changes - converted to simple_mmio - removed unimplemented .remove function - removed DTS description - converted to use syscon/regmap --rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: avoid PLAT_ORION dependencyRussell King1-4/+0
Armada 8040 also needs orion pinctrl, and as these symbols are only selected, there's no need to make them depend on PLAT_ORION. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: remove the offset property for regmapGregory CLEMENT2-6/+2
The offset property of the pinctrl node, when a regmap is used in the device tree, was never used nor documented in the binding. Moreover, the compatible string is enough to let the driver know which offset using. So this patch removes the property and move the information at the driver level. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: meson-gxl: add tsin_a pinsJerome Brunet1-0/+36
Add Tsin A pins to bank DV and X. We don't have a driver for the tsin yet but since the tsin A pinmux is enabled by default at boot time, declaring this pinmux is required to properly operate on GPIOX. Without this change, GPIOX 8, 9, 10 and 11 can't be driven as GPIO output as the tsin A seems to have priority. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-13pinctrl: sh-pfc: r8a7795: Add EtherAVB pins, groups and functionGeert Uytterhoeven1-0/+111
Add pins, groups, and a function for EtherAVB on R-Car H3 ES2.0. Extracted from a big patch in the BSP by Takeshi Kihara. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-06-09pinctrl: intel: Add Intel Cannon Lake PCH pin controller supportMika Westerberg3-0/+451
This adds pinctrl/GPIO support for Intel Cannon Lake PCH. The Cannon Lake PCH GPIO is based on newer version of the Intel GPIO hardware. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: intel: Make it possible to specify mode per pin in a groupMika Westerberg2-8/+26
On some SoCs not all pins in a group use the same mode when a certain function is muxed out of them. This makes it possible to specify mode per pin as an array instead in addition to single integer. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: intel: Add support for variable size pad groupsMika Westerberg3-56/+176
The Intel GPIO hardware has a concept of pad groups, which means 1 to 32 pads occupying their own GPI_IS, GPI_IE, PAD_OWN and so on registers. The existing hardware has the same amount of pads in each pad group (except the last one) so it is possible to use community->gpp_size to calculate start offset of each register. With the next generation SoCs the pad group size is not always the same anymore which means we cannot use community->gpp_size for register offset calculations directly. To support variable size pad groups we introduce struct intel_padgroup that can be filled in by the client drivers according the hardware pad group layout. The core driver will always use these when it performs calculations for pad register offsets. The core driver will automatically populate pad groups based on community->gpp_size if the driver does not provide any. This makes sure the existing drivers still work as expected. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com> Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: sunxi: Add support for A83T R_PIOChen-Yu Tsai3-0/+133
The R_PIO on the A83T is almost the same as the one found on the A64, except that the CIR_RX function was moved from pin PL11 to pin PL12. Add a driver for it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: bcm: cleanup Broadcom license headersScott Branden4-15/+15
Use consistent license headers for Broadcom files by placing additional comments outside of standard legal header. Also, update legal header to 2017 format as "Broadcom Corporation" has changed to "Broadcom". Signed-off-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: sunxi: constify irq_domain_opsTobias Klauser1-1/+1
struct irq_domain_ops is not modified, so it can be made const. Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: stm32: Fix bad function callAlexandre TORGUE1-1/+1
In stm32_pconf_parse_conf function, stm32_pmx_gpio_set_direction is called with wrong parameter value. Indeed, using NULL value for range will raise an oops. Fixes: aceb16dc2da5 ("pinctrl: Add STM32 MCUs support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl/amd: Use regular interrupt instead of chainedThomas Gleixner1-50/+41
The AMD pinctrl driver uses a chained interrupt to demultiplex the GPIO interrupts. Kevin Vandeventer reported, that his new AMD Ryzen locks up hard on boot when the AMD pinctrl driver is initialized. The reason is an interrupt storm. It's not clear whether that's caused by hardware or firmware or both. Using chained interrupts on X86 is a dangerous endavour. If a system is misconfigured or the hardware buggy there is no safety net to catch an interrupt storm. Convert the driver to use a regular interrupt for the demultiplex handler. This allows the interrupt storm detector to catch the malfunction and lets the system boot up. This should be backported to stable because it's likely that more users run into this problem as the AMD Ryzen machines are spreading. Reported-by: Kevin Vandeventer Link: https://bugzilla.suse.com/show_bug.cgi?id=1034261 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: stm32: remove useless checkAlexandre TORGUE1-5/+0
There is no link between the number of elements of tab which contains all pin desc (located in each pinctrl-stm32xxxx.c files) and the pin number (defined in the tab). Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: meson: add interrupts to pinctrl dataJerome Brunet5-46/+63
Add GPIO interrupt information to pinctrl data. Added to the original version from Jerome was data for Meson GXL. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09pinctrl: meson-gxbb: remove non-existing pin GPIOX_22Heiner Kallweit1-1/+0
After commit 34e61801a3b9 "pinctrl: meson-gxbb: Add missing GPIODV_18 pin entry" I started to get the following warning: "meson-pinctrl c8834000.periphs:pinctrl@4b0: names 119 do not match number of GPIOs 120" It turned out that not the mentioned commit has a problem, it just revealed another problem which had existed before. There is no PIN GPIOX_22 on Meson GXBB. Fixes: 468c234f9ed7 ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-07pinctrl: samsung: Explicitly cast pointer returned by of_iomap() to iomemKrzysztof Kozlowski1-3/+3
For S5Pv210 retention control, the driver stores the iomem pointer from of_iomap() under a void pointer member. This makes sparse unhappy: drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: expected void const volatile [noderef] <asn:2>*addr drivers/pinctrl/samsung/pinctrl-exynos.c:664:36: got void * The iomem pointer is used safely (stored under priv by s5pv210_retention_init(), used by s5pv210_retention_disable()) thus we can add explicit casts to iomem to silence the warning. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Handle memory allocation failure during wakeup banks initKrzysztof Kozlowski1-0/+2
Check if kmemdup failed during wakeup banks initialization. Otherwise NULL pointer would be stored under "irq_chip" member of bank and later dereferenced in interrupt handler. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Constify wakeup driver specific dataKrzysztof Kozlowski1-2/+2
Static exynos_irq_chip structures, containing driver specific data, are referenced only through opaque data pointer in const of_device_id table. The contents of pointed memory (exynos_irq_chip structure itself) is then copied with kmemdup() during wakeup initialization so exynos_irq_chip can be made const for code safenes. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-06-07pinctrl: samsung: Split Exynos drivers per ARMv7 and ARMv8Krzysztof Kozlowski7-1159/+1245
Exynos pinctrl drivers contain pretty big per-SoC data structures. The pinctrl-exynos object file contained code and data for both ARMv7 and ARMv8 SoCs thus it grew big. There will not be a shared image between ARMv7 and ARMv8 so there is no need to combine all of this into one driver. Splitting the data allows to make it more granular (e.g. code related to ARMv8 Exynos is self-contained), slightly speed up the compilation and reduce the effective size of compiled kernel. The common data structures and functions reside still in existing pinctrl-exynos.c. Only the SoC-specific parts were moved out to new files. Except marking few functions non-static and adding them to header, there were no functional changes in the code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
2017-05-31Merge tag 'sh-pfc-for-v4.13-tag1' of ↵Linus Walleij9-1353/+1926
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.13 - Add PWM, AVB MDIO/MII, and sound pin groups on R-Car M3-W, - Add support for RZ/G1M and RZ/G1E, - Small fixes and cleanups.
2017-05-31pinctrl: stm32: Implement .get_direction gpio_chip callbackAlexandre TORGUE2-3/+25
Add .get_direction() gpiochip callback in STM32 pinctrl driver. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31pinctrl: stm32: set pin to gpio input when used as interruptAlexandre TORGUE1-10/+29
This patch ensures that pin is correctly set as gpio input when it is used as an interrupt. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-31pinctrl: mcp23s08: improve I2C Kconfig dependencyArnd Bergmann1-0/+1
With "SPI_MASTER=y && I2C=m", we can build mcp23s08 as a built-in driver, which then results in a link failure: drivers/pinctrl/built-in.o: In function `mcp23s08_probe_one.isra.0': :(.text+0x7910): undefined reference to `__devm_regmap_init_i2c' drivers/pinctrl/built-in.o: In function `mcp23s08_init': :(.init.text+0x110): undefined reference to `i2c_register_driver' drivers/pinctrl/built-in.o: In function `mcp23s08_exit': :(.exit.text+0x3c): undefined reference to `i2c_del_driver' To avoid the problem, this adds another dependency on I2C that enforces mcp23s08 to be a loadable module whenever the I2C core is a module. Fixes: 64ac43e6fa28 ("gpio: mcp23s08: move to pinctrl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: xway: fix copy/paste error in xrx200_grpsMartin Schiller1-1/+1
Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: drop dedicated A20 driverIcenowy Zheng3-1061/+0
As we added A20 support to A10 pinctrl driver, now we can delete the dedicated A20 pinctrl driver, which is duplicated code. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> [Drop Makefile entry] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: add A20 support to A10 driverIcenowy Zheng2-65/+226
As A20 is designed as a pin-compatible upgrade of A10, their pin controller are very similar, and can share one driver. Add A20 support to the A10 driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-29pinctrl: sunxi: Add SoC ID definitions for A10, A20 and R40 SoCsIcenowy Zheng1-0/+3
Allwinner A10, A20 and R40 SoCs have similar GPIO layout. Add SoC definitions in pinctrl-sunxi.h, in order to merge A20 support into A10 driver, and add R40 support into it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 12:03:22 +0000