summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/sh-pfc
AgeCommit message (Collapse)AuthorFilesLines
2020-09-15pinctrl: Rename sh-pfc to renesasGeert Uytterhoeven41-110424/+0
The drivers/pinctrl/sh-pfc subdirectory was originally created to group pin control drivers for various Renesas SuperH and SH-Mobile platforms. However, the name "sh-pfc" no longer reflects its contents, as the directory now contains pin control drivers for Renesas SuperH, ARM32, and ARM64 SoCs. Hence rename the subdirectory from drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, and the related Kconfig symbol from PINCTRL_SH_PFC to PINCTRL_RENESAS. Rename the git branch in MAINTAINERS, too, for consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
2020-09-15pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}Geert Uytterhoeven1-2/+0
The RZ/N1 pin control driver does not use pin groups or pin functions, so there is no need to select GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-2-geert+renesas@glider.be
2020-09-15pinctrl: rza1: Switch to using "output-enable"Geert Uytterhoeven1-1/+2
For pins requiring software driven IO output operations, the RZ/A1 Pin Controller uses either the "output-high" or "output-low" DT property to enable the corresponding output buffer. The actual line value doesn't matter, as it is ignored. Commit 425562429d4f3b13 ("pinctrl: generic: Add output-enable property") introduced a new DT property for this specific use case. Update the RZ/A1 Pin Controller DT bindings and driver to use this new property instead. Preserve backwards compatibility with old DTBs in the driver, as this comes at a very small cost. Notes: - The DT binding examples already used the new property, - There are no upstream users of the old properties. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200821111401.4021-1-geert+renesas@glider.be
2020-09-15pinctrl: sh-pfc: Tidy up driver description titleKuninori Morimoto1-99/+99
Sort each driver by description title in alphabetical order. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h7ssy4qy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Align driver description titleKuninori Morimoto1-44/+44
Now, Renesas Pin Control drivers are under menu, but current descriptions are not aligned. This patch aligns them. - RZ/A2 gpio and pinctrl driver - RZ/N1 pinctrl driver - Emma Mobile EV2 pin control support - R-Mobile APE6 pin control support - R-Mobile A1 pin control support - RZ/G1H pin control support - RZ/G1M pin control support + pin control support for RZ/A2 + pin control support for RZ/N1 + pin control support for Emma Mobile EV2 + pin control support for R-Mobile APE6 + pin control support for R-Mobile A1 + pin control support for RZ/G1H + pin control support for RZ/G1M Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87imd8y4r2.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Collect Renesas related CONFIGs in one placeKuninori Morimoto5-0/+2938
Renesas related pinctrl CONFIGs are located in many places, which is confusing. This patch collects them into the same place, grouped in a new "Renesas pinctrl drivers" menu. This patch also moves pinctrl-rz{a1,a2,n1}.c into the sh-pfc folder. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k0xoy4r7.wl-kuninori.morimoto.gx@renesas.com [geert: Update path in MAINTAINERS] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Tidy up Emma Mobile EV2Kuninori Morimoto1-1/+1
It is "Emma Mobile EV2" not "AV2". This patch tidies it up. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfi4y4re.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-08-31pinctrl: sh-pfc: r8a7790: Add CAN pins, groups and functionsLad Prabhakar1-2/+110
Add pins, groups and functions for the CAN{0,1} interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200825095448.13093-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-08-17pinctrl: sh-pfc: r8a7790: Add USB1 PWEN pin and groupLad Prabhakar1-1/+10
Add USB1 PWEN pin and group for USB1 interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/1595005225-11519-2-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-07-14pinctrl: sh-pfc: pfc-r8a77951: Add R8A774E1 PFC supportLad Prabhakar5-415/+474
Renesas RZ/G2H (r8a774e1) is pin compatible with R-Car H3 (R8A77951), however it doesn't have several automotive specific peripherals. Add automotive-specific pin groups/functions along with common pin groups/functions for supporting both r8a77951 and r8a774e1 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/1594138692-16816-13-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22pinctrl: sh-pfc: r8a77970: Add RPC pins, groups, and functionsSergei Shtylyov1-0/+76
Add the RPC pins/groups/functions to the R8A77970 PFC driver. They can be used if an Octal-SPI flash or HyperFlash is connected. Based on the patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/3982785f-4fca-96f9-2b6a-a0d1828cb0ad@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-06-22pinctrl: sh-pfc: r8a77980: Add RPC pins, groups, and functionsSergei Shtylyov1-0/+76
Add the RPC pins/groups/functions to the R8A77980 PFC driver. They can be used if an Octal-SPI flash or HyperFlash is connected. Based on the patch by Dmitry Shifrin <dmitry.shifrin@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/fd089d37-95bb-4ec9-282f-e04d7e5195e4@cogentembedded.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-25Merge tag 'sh-pfc-for-v5.8-tag2' of ↵Linus Walleij5-352/+404
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.8 (take two) - Add support for the new RZ/G1H (r8a7742) SoC, - Minor fixes and improvements.
2020-05-15pinctrl: sh-pfc: r8a7790: Add r8a7742 PFC supportLad Prabhakar5-352/+404
Renesas RZ/G1H (R8A7742) is pin compatible with R-Car H2 (R8A7790), however it doesn't have several automotive specific peripherals. Add automotive-specific pin groups/functions along with common pin groups/functions for supporting both r8a7790 and r8a7742 SoC. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1588542414-14826-3-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-04-28pinctrl: fix several typosDejin Zheng1-2/+3
use codespell to fix lots of typos over frontends. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> CC: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200421142402.9524-1-zhengdejin5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: sh-pfc: Remove use of ARCH_R8A7795Geert Uytterhoeven1-2/+2
CONFIG_ARCH_R8A7795 was split in CONFIG_ARCH_R8A77950 and CONFIG_ARCH_R8A77951 in commit b925adfceb529389 ("soc: renesas: Add ARCH_R8A7795[01] for existing R-Car H3"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200218112557.5924-1-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: gpio: Return early in gpio_pin_to_irq()Geert Uytterhoeven1-4/+1
As of commit 4adeabd042422cee ("pinctrl: sh-pfc: Remove hardcoded IRQ numbers"), only a single operation needs to be performed after finding the wanted pin. Hence decrease the needed attention span of the casual reader by replacing the goto by a direct return. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200212090200.11106-1-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add function GPIO checksGeert Uytterhoeven1-0/+20
Add checks for legacy function GPIO descriptors: 1. Function GPIOs must have a name, 2. Names must be unique, 3. Enum ID values must be unique. This exposes bugs like those fixed in - commit 884caadad128efad ("pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B"), - commit 55b1cb1f03ad5eea ("pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs"), - commit 02aeb2f21530c98f ("pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs"), - commit db9c07272c8245a2 ("sh: sh7264: Remove bogus SSU GPIO function definitions"), - commit b4fba344a2930769 ("sh: sh7269: Remove bogus SSU GPIO function definitions"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-14-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add data register checksGeert Uytterhoeven1-0/+8
Add checks for data register descriptors: 1. Register addresses must be unique. 2. Enum ID values must be unique. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-13-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add ioctrl register checksGeert Uytterhoeven1-0/+4
Add checks for generic control register descriptors: 1. Register addresses must be unique. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-12-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add bias register checksGeert Uytterhoeven1-0/+16
Add checks for bias register descriptors: 1. Pull-up and optional pull-down register addresses must be unique, 2. Referred pins must exist. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-11-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add drive strength register checksGeert Uytterhoeven1-0/+45
Add checks for drive strength register descriptors: 1. Register addresses must be unique, 2. Register fields must be non-overlapping, 3. Referred pins must exist. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-10-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Improve pin group checksGeert Uytterhoeven1-3/+10
Improve the checks for pin group descriptors: 1. Introduce a local variable for the current group, to make the checks easier to read, 2. Pin group names must be unique. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-9-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Improve pin function checksGeert Uytterhoeven1-2/+7
Improve the checks for pin function descriptors: 1. Merge declaration and assignment of the local variable for the current pin function, 2. Pin function names must be unique. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-8-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Improve pin checksGeert Uytterhoeven1-14/+16
Improve the checks for pin descriptors: 1. Introduce local variables for the current pin, to make the checks easier to read, 2. Pins must have a name, 3. Fix double printing of identical pin names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-7-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add check for enum ID conflictsGeert Uytterhoeven1-2/+47
Add a helper to verify that enum IDs are unique, and use it to validate the enum ID arrays in config register descriptors. This exposes bugs like those fixed in: - commit 805f635703b2562b ("pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_B"), - commit 884caadad128efad ("pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B"), - commit 2a069a92811fb35b ("pinctrl: sh-pfc: sh7264: Fix Port K I/O Register 0 definition"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-6-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add check for config register conflictsGeert Uytterhoeven1-0/+32
Add a helper to verify that register addresses are unique, and use it to validate config register descriptors. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-5-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add helper for safe name comparisonGeert Uytterhoeven1-4/+11
Add a helper to check if two strings are identical, skipping NULL pointers. This simplifies callers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-4-geert+renesas@glider.be
2020-02-21pinctrl: sh-pfc: checker: Add helpers for reportingGeert Uytterhoeven1-52/+44
Add helpers to report errors and warnings, and to increase the corresponding counters. This simplifies callers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-3-geert+renesas@glider.be
2020-02-10pinctrl: sh-pfc: checker: Move data before codeGeert Uytterhoeven1-3/+3
Restructure the checker to move all data definitions to the top, before the code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200110131927.1029-2-geert+renesas@glider.be
2020-01-08pinctrl: sh-pfc: Split R-Car H3 support in two independent driversGeert Uytterhoeven6-59/+81
Despite using the same compatible values ("r8a7795"-based) because of historical reasons, R-Car H3 ES1.x (R8A77950) and R-Car H3 ES2.0+ (R8A77951) are really different SoCs, with different part numbers, and with different Pin Function Controller blocks. Reflect this in the pinctrl configuration, by replacing the existing CONFIG_PINCTRL_PFC_R8A7795 symbol by two new config symbols: CONFIG_PINCTRL_PFC_R8A77950 and CONFIG_PINCTRL_PFC_R8A77951. The latter are selected automatically, depending on the soon-to-be-introduced corresponding SoC-specific config options, and on the current common config option, to relax dependencies. Rename the individual pin control driver source files from pfc-r8a7795-es1.c to pfc-r8a77950.c, and from pfc-r8a7795.c to pfc-r8a77951.c, and make them truly independent. As both SoCs share the same compatible value, special care must be taken to match them to the correct pin control driver, if support for it is included in the running kernel. This will allow making support for early R-Car H3 revisions optional, the largest share of which is taken by the pin control driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191230083156.19191-1-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: sh7269: Fix CAN function GPIOsGeert Uytterhoeven1-12/+27
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs. A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing. Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[]. See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: sh7264: Fix CAN function GPIOsGeert Uytterhoeven1-5/+4
pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the two CAN outputs. Fix this by: - Renaming CRX0_CRX1_MARK to CTX0_CTX1_MARK, as PJ2MD[2:0]=010 configures the combined "CTX0&CTX1" output signal, - Renaming CRX0X1_MARK to CRX0_CRX1_MARK, as PJ3MD[1:0]=10 configures the shared "CRX0/CRX1" input signal, which is fed to both CAN inputs, - Adding the missing function GPIO definition for "CTX0&CTX1" to pinmux_func_gpios[], - Moving all CAN enums next to each other. See SH7262 Group, SH7264 Group User's Manual: Hardware, Rev. 4.00: [1] Figure 1.2 (3) (Pin Assignment for the SH7264 Group (1-Mbyte Version), [2] Figure 1.2 (4) Pin Assignment for the SH7264 Group (640-Kbyte Version, [3] Table 1.4 List of Pins, [4] Figure 20.29 Connection Example when Using This Module as 1-Channel Module (64 Mailboxes x 1 Channel), [5] Table 32.10 Multiplexed Pins (Port J), [6] Section 32.2.30 (3) Port J Control Register 0 (PJCR0). Note that the last 2 disagree about PJ2MD[2:0], which is probably the root cause of this bug. But considering [4], "CTx0&CTx1" in [5] must be correct, and "CRx0&CRx1" in [6] must be wrong. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-4-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: sh7264: Fix Port K I/O Register 0 definitionGeert Uytterhoeven1-12/+12
The register definition block for the Port K I/O Register is accidentally using the defines for Port J. Replace them by the proper Port K defines. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-3-geert+renesas@glider.be
2019-12-31pinctrl: sh-pfc: r8a7778: Fix duplicate SDSELF_B and SD1_CLK_BGeert Uytterhoeven1-2/+2
The FN_SDSELF_B and FN_SD1_CLK_B enum IDs are used twice, which means one set of users must be wrong. Replace them by the correct enum IDs. Fixes: 87f8c988636db0d4 ("sh-pfc: Add r8a7778 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191218194812.12741-2-geert+renesas@glider.be
2019-12-20pinctrl: sh-pfc: r8a77965: Fix DU_DOTCLKIN3 drive/bias controlGeert Uytterhoeven1-3/+3
R-Car Gen3 Hardware Manual Errata for Rev. 2.00 of October 24, 2019 changed the configuration bits for drive and bias control for the DU_DOTCLKIN3 pin on R-Car M3-N, to match the same pin on R-Car H3. Update the driver to reflect this. After this, the handling of drive and bias control for the various DU_DOTCLKINx pins is consistent across all of the R-Car H3, M3-W, M3-W+, and M3-N SoCs. Fixes: 86c045c2e4201e94 ("pinctrl: sh-pfc: r8a77965: Replace DU_DOTCLKIN2 by DU_DOTCLKIN3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191113101653.28428-1-geert+renesas@glider.be
2019-12-13pinctrl: sh-pfc: Remove use of ARCH_R8A7796Geert Uytterhoeven1-1/+1
CONFIG_ARCH_R8A7796 was renamed to CONFIG_ARCH_R8A77960 in commit 39e57e14d7eaf818 ("soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W"), so its users can be removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191211100308.6958-1-geert+renesas@glider.be
2019-12-09pinctrl: sh-pfc: Make legacy function GPIO handling less fragileGeert Uytterhoeven1-6/+5
If there are no function GPIOs, sh_pfc_register_gpiochip() returns early with a success indicator. This is fragile, as new code may be added after the #ifdef block, which won't be executed in case of early return. Invert the logic, so the code always continues until the end of the function on success. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20191113101809.28600-1-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_BGeert Uytterhoeven1-2/+2
The definitions for bit field [19:18] of the Peripheral Function Select Register 3 were accidentally copied from bit field [20], leading to duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and ET0_ETXD4 functions. Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4 enum values, and correcting the functions. Reported-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC supportGeert Uytterhoeven5-1/+40
Add support for the Pin Function Controller in the R-Car M3-W+ (R8A77961) SoC. R-Car M3-W+ is pin compatible with R-Car M3-W (R8A77960), which allows for both SoCs to share a driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122955.12420-4-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960Geert Uytterhoeven5-8/+8
Rename CONFIG_PINCTRL_PFC_R8A7796 for R-Car M3-W (R8A77960) to CONFIG_PINCTRL_PFC_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_PINCTRL_PFC_R8A77961. Extend the dependency of CONFIG_PINCTRL_PFC_R8A77960 from CONFIG_ARCH_R8A7796 to CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the SoC configuration symbol. Rename r8a7796_pinmux_info to r8a77960_pinmux_info, as it contains an r8a77960-based name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122955.12420-3-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: Do not use platform_get_irq() to count interruptsGeert Uytterhoeven1-10/+6
As platform_get_irq() now prints an error when the interrupt does not exist, counting interrupts by looping until failure causes the printing of scary messages like: sh-pfc e6060000.pin-controller: IRQ index 0 not found Fix this by using the platform_irq_count() helper instead. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191016142601.28255-1-geert+renesas@glider.be
2019-10-14pinctrl: sh-pfc: pfc-r8a77965: Fix typo in pinmux macro for SCL3Keiya Nobuta1-1/+1
SCL3 is assigned to GPSR2 bit7 referred by IP1_23_20 macro. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060619.30237-4-nobuta.keiya@fujitsu.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-14pinctrl: sh-pfc: pfc-r8a7796: Fix typo in pinmux macro for SCL3Keiya Nobuta1-1/+1
SCL3 is assigned to GPSR2 bit7 referred by IP1_23_20 macro. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060619.30237-3-nobuta.keiya@fujitsu.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-14pinctrl: sh-pfc: pfc-r8a7795-es1: Fix typo in pinmux macro for SCL3Keiya Nobuta1-1/+1
SCL3 is assigned to GPSR2 bit7 referred by IP1_23_20 macro. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060619.30237-2-nobuta.keiya@fujitsu.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-14pinctrl: sh-pfc: pfc-r8a7795: Fix typo in pinmux macro for SCL3Keiya Nobuta1-1/+1
SCL3 is assigned to GPSR2 bit7 referred by IP1_23_20 macro. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060619.30237-1-nobuta.keiya@fujitsu.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-14pinctrl: sh-pfc: Fix PINMUX_IPSR_PHYS() to set GPSRKeiya Nobuta1-2/+2
This patch allows PINMUX_IPSR_PHYS() to set bits in GPSR. When assigning function to pin, GPSR should be set to peripheral function. For example when using SCL3, GPSR2 bit7 (PWM1_A pin) should be set to peripheral function. Signed-off-by: Keiya Nobuta <nobuta.keiya@fujitsu.com> Link: https://lore.kernel.org/r/20191008060112.29819-1-nobuta.keiya@fujitsu.com Fixes: 50d1ba1764b3e00a ("pinctrl: sh-pfc: Add physical pin multiplexing helper macros") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01pinctrl: sh-pfc: r8a77965: Add R8A774B1 PFC supportBiju Das5-409/+464
Renesas RZ/G2N (r8a774b1) is pin compatible with R-Car M3-N (r8a77965), however it doesn't have several automotive specific peripherals. Add a r8a77965 specific pin groups/functions along with common pin groups/functions for supporting both r8a77965 and r8a774b1 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Link: https://lore.kernel.org/r/1568881036-4404-9-git-send-email-biju.das@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-10-01Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D"Geert Uytterhoeven1-4/+5
This reverts commit e167d723e1a472d252e5c4baf823b77ce5543b05. According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug 24, 2018, the SEL_SIMCARD_{0,1} definition was to be deleted. However, this errata merely fixed an accidental double definition in the Hardware User's Manual Rev. 1.00. The real definition is still present in later revisions of the manual (Rev. 1.50 and Rev. 2.00). Hence revert the commit to recover the definition. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190904121658.2617-4-geert+renesas@glider.be
2019-10-01Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 ↵Geert Uytterhoeven1-9/+11
and SSI_WS2" This reverts commit e87882eb9be10b2b9e28156922c2a47d877f5db4. According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug 24, 2018, the SEL_SSI2_{0,1} definition was to be deleted. However, this errata merely fixed an accidental double definition in the Hardware User's Manual Rev. 1.00. The real definition is still present in later revisions of the manual (Rev. 1.50 and Rev. 2.00). Hence revert the commit to recover the definition. Based on a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Link: https://lore.kernel.org/r/20190904121658.2617-3-geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 14:55:34 +0000