summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/sh-pfc
AgeCommit message (Collapse)AuthorFilesLines
2014-05-23pinctrl: sh-pfc: r8a7740: Allow Multiplatform BuildMagnus Damm1-0/+2
Add #ifdefs to allow r8a7740 Multiplatform build. Needed to enable r8a7740 Multiplatform support. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23pinctrl: sh-pfc: Don't set the pinmux_irq irq field for multiplatformLaurent Pinchart1-0/+5
In the multiplatform kernel case the IRQs associated with the PFC GPIOs are specified through DT. The pinmux_irq irq field is thus ignored by the code, and doesn't need to be set. This will allow removing the mach/irq.h include from pfc-*.c files that was required for the irq_pin() macro used to initialize the irq field. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl: pfc: r8a7790: add mux data for IIC(B) coresWolfram Sang1-2/+116
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl: pfc: r8a7790: add i2c0 muxingWolfram Sang1-1/+21
Add the muxing for the last missing i2c rcar core. Fix the sorting for SH_PFC_PIN_NAMED while we are here. Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22sh-pfc: r8a7791: Add Audio pin supportKuninori Morimoto1-0/+61
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22sh-pfc: r8a7791: Add SSI pin supportKuninori Morimoto1-0/+314
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl: sh-pfc: r8a7791: Split the DU sync and cde/disp groupsLaurent Pinchart1-10/+27
The DU parallel interface ODDF signal is optional, move it out of the HSYNC/VSYNC group into a group of its down. The CDE and DISP signals are independent, split them to two different groups. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-01Merge tag 'pinctrl-v3.15-1' of ↵Linus Torvalds2-0/+767
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control bulk changes from Linus Walleij: "Pin control bulk changes for the v3.15 series, no new core functionality this time, just incremental driver updates: - A large refactoring of the MVEBU (Marvell) driver. - A large refactoring of the Tegra (nVidia) driver. - GPIO interrupt including soft edges support in the STi driver. - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin), pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi (AllWinner), i.MX (Freescale), Baytrail" * tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: tegra: add some missing Tegra114 entries pinctrl: tegra: fix some mistakes in Tegra124 pinctrl: msm: fix up out-of-order merge conflict pinctrl: st: Fix error check for of_irq_to_resource usage pinctrl: tegra: consistency cleanup pinctrl: tegra: dynamically calculate function list of groups pinctrl: tegra: init Tegra20/30 at module_init time pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays pinctrl: st: add pinctrl support for the STiH407 SoC pinctrl: st: Enhance the controller to manage unavailable registers pinctrl: msm: Simplify msm_config_reg() and callers pinctrl: msm: Remove impossible WARN_ON()s pinctrl: msm: Replace lookup tables with math pinctrl: msm: Drop OF_IRQ dependency pinctrl: msm: Drop unused includes pinctrl: msm: Check for ngpios > MAX_NR_GPIO pinctrl: msm: Silence recursive lockdep warning pinctrl: mvebu: silence WARN to dev_warn pinctrl: msm: drop wake_irqs bitmap pinctrl-baytrail: add function mux checking in gpio pin request ...
2014-03-05pinctrl: sh-pfc: r8a7791: SD1_CLK fixMagnus Damm1-2/+4
Fix the SD1_CLK handling for r8a7791. Without this patch it is impossible to request all pins needed for SDHI1 on the Koelsch board. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sh-pfc: r8a7791: Add alternative MSIOF pin groupsGeert Uytterhoeven1-0/+469
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05pinctrl: sh-pfc: r8a7790: Add alternative MSIOF pin groupsGeert Uytterhoeven1-0/+129
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25pinctrl: pfc: r8a7791: add mux data for IIC(B) coresWolfram Sang1-0/+64
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25pinctrl: sh-pfc: r8a7790: Add QSPI pin groupsGeert Uytterhoeven1-0/+33
A QSPI function set consists of 3 groups: - qspi_ctrl (2 control wires) - qspi_data2 (2 data wires, for Single/Dual SPI) - qspi_data4 (4 data wires, for Quad SPI) Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-11pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUSMagnus Damm1-0/+9
Create a new group for the USB0 OVC/VBUS pin by itself. This allows us to monitor PWEN as GPIO on the Lager board. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-10pinctrl: sh-pfc: r8a7791: Add QSPI pin groupsGeert Uytterhoeven1-0/+63
A QSPI function set consists of 3 groups: - qspi_ctrl (2 control wires) - qspi_data2 (2 data wires, for Single/Dual SPI) - qspi_data4 (4 data wires, for Quad SPI) Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-01-21Merge tag 'pinctrl-v3.14-1' of ↵Linus Torvalds24-232/+1438
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull bulk pin control changes from Linus Walleij: "This has been queued and tested for a while. Lots of action here, like in the GPIO tree, embedded stuff like this is really hot now it seems. Details in the signed tag. I'm especially happy about the Qualcomm driver as it is used in such a huge subset of mobile handsets out there, and these platforms in general need better upstream support - New driver for the Qualcomm TLMM pin controller and its msm8x74 subdriver. - New driver for the Broadcom Capri BCM281xx SoC. - New subdriver for the imx25 pin controller. - New subdriver for the Tegra124 pin controller. - Lock GPIO lines as IRQs for select combined pin control and GPIO drivers for baytrail and sirf. - Some semi-big refactorings and extenstions to the sirf driver. - Lots of patching, cleanup and fixing in the Renesas "PFC" driver and associated subdrivers as usual. It is settling down a little bit now it seems. - Minor fixes and incremental updates here and there as usual" * tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sunxi: Honor GPIO output initial vaules pinctrl: capri: add dependency on OF ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs ARM: pinctrl: Add Broadcom Capri pinctrl driver pinctrl: Add pinctrl binding for Broadcom Capri SoCs pinctrl: Add void * to pinctrl_pin_desc pinctrl: st: Fix a typo in probe pinctrl: Fix some typos and grammar issues in the documentation pinctrl: sirf: lock IRQs when starting them pinctrl: sirf: put gpio interrupt pin into input status automatically pinctrl: sirf: use only one irq_domain for the whole device node pinctrl: single: fix infinite loop caused by bad mask pinctrl: single: fix pcs_disable with bits_per_mux pinctrl: single: fix DT bindings documentation pinctrl: as3722: Set pin to output mode for some function pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync pinctrl: sirf: fix the pins of sdmmc5 connected with TriG pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6 pinctrl: sunxi: Add Allwinner A20 clock output pin functions pinctrl/lantiq: fix typo ...
2014-01-07pinctrl: sh-pfc: r8a7791: Add I2C pinsValentine Barshak1-0/+196
This adds I2C[0-4] pinmux support to R8A7791 SoC. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7791: Add VIN pinsValentine Barshak1-0/+360
This adds VIN[0-2] pinmux support to r8a7791 SoC. VIN1 B mirror is also added along with the primary configuration since it's the only one that provides access to all 24 data bits on VIN1. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7791: Group USB PWEN and OVC pins togetherValentine Barshak1-28/+12
This groups USB PWEN and OVC pins together on R8A7791 SoC, the same way it's done on R8A7790, since both are needed for a USB device. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07pinctrl: sh-pfc: r8a7790: Fix vsync value in the vin3_sync_mux arrayValentine Barshak1-1/+1
This fixes a typo in the vin3_sync_mux array (s/VI2/VI3/). Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20pinctrl: sh-pfc: ARM: Constify pins and cfg_regs arraysLaurent Pinchart8-11/+11
The arrays are never modified, declare them as const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20pinctrl: sh-pfc: sh: Constify pins and cfg_regs arraysLaurent Pinchart12-12/+12
The arrays are never modified, declare them as const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20pinctrl: sh-pfc: Constify IRQ GPIOs arraysLaurent Pinchart2-3/+3
The arrays are never modified, make them const. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20pinctrl: sh-pfc: Constify enum_ids and var_field_width compound literalsLaurent Pinchart1-4/+5
The enum_ids and var_field_width fields of struct pinmux_data_reg and pinmux_cfg_reg are initialized using compound literals. Cast them to const to store them in .rodata. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: Support GPIO to IRQ mapping specified IRQ resourcesLaurent Pinchart3-17/+68
On non-DT platforms IRQ controllers associated with the GPIOs have a fixed IRQ base value known at compile time. The sh-pfc driver translates GPIO number to IRQ numbers using a hardcoded table. This mechanism breaks on DT platforms, as the IRQ base values are dynamic in that case. Fix this by specifying IRQs associated with GPIOs in IRQ resources, populated automatically from the device tree. When IRQ resources are specified the driver requires one IRQ resource per GPIO able to generate an interrupt, and uses the translation table to compute the IRQ resource offset instead of the IRQ number. Cc: devicetree@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: Rename sh_pfc window field to windowsLaurent Pinchart7-20/+21
There's more than one window, name the field windows. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: sh73a0: Sort IRQ entries by IRQ numberLaurent Pinchart1-24/+23
This makes catching duplicate entries easier. Merge the two IRQ9 entries found after sorting. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: sh73a0: Add missing IRQ15Laurent Pinchart1-0/+1
The external IRQ15 input multiplexed on GPIO 0 is missing. Add it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: Terminate gpios array by -1Laurent Pinchart2-4/+4
0 is a valid GPIO value, use -1 to terminate the gpios array in IRQ lists. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12sh-pfc: Turn unsigned indices into unsigned intLaurent Pinchart2-5/+5
Some indices take positive values only, make them unsigned. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Add VIN2 and VIN3 pinsValentine Barshak1-0/+168
There are VIN2 and VIN3 channels available on the R8A7790 SoC. VIN2 supports 4/8/16/18/24-bit data, while VIN3 supports 8-bit. Add both here, covering all possible data pin configurations. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Add missing VIN1 pinsValentine Barshak1-8/+104
Both VIN0 and VIN1 channels support identical input interfaces. Add missing VIN1 pins here and organize them in the same pin groups as VIN0. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Reorganize VIN0 data pinsValentine Barshak1-30/+95
This reorganizes and renames VIN0 data pin groups to cover all possible configurations. There's total of eight data pin groups, one per each configuration. Most of the groups share the same pin/mux array. Only the 18-bit configuration needs a separate pin/mux array since in combines interleaved data pins. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Group VIN0 HSYNC and VSYNC togetherValentine Barshak1-12/+6
This groups VIN0 HSYNC and VSYNC pins together since one cannot be used without another. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10pinctrl: sh-pfc: pfc-r8a7790: Rename VIN pin groupsValentine Barshak1-16/+16
This drops superfluous "signal" word from the pin group names and renames data_enable group to clkenb as in the h/w manual. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10sh-pfc: r8a7791: Fix msiof groups to follow GROUPTakashi Yoshii1-6/+15
SH_PFC_PIN_GROUP(), pins[], mux[], defines clk, sync, ss1, ss2, rx, tx But, msiof?_groups[] defines clk, ctrl, data Fix msiof[012]_groups members to be consistent to PIN_GROUP. Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: r8a7790: Add Audio pin supportKuninori Morimoto1-0/+68
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: r8a7790: Add SSI pin supportKuninori Morimoto1-0/+239
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10sh-pfc: Share common PORTCR macro definitionLaurent Pinchart5-45/+1
The macro is defined identically in four different locations. Share it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10sh-pfc: Fix PINMUX_GPIO macroLaurent Pinchart1-1/+1
Commit 7cbb0e55e27e ("sh-pfc: Don't duplicate argument to PINMUX_GPIO macro") erronesouly modified the PINMUX_GPIO macro in a way that resulted in all pins being named "name". Fix the macro to name the pins correctly. Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03sh-pfc: sh7372: Fix pin bias setupLaurent Pinchart1-1/+1
When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-03sh-pfc: r8a7740: Fix pin bias setupLaurent Pinchart1-1/+1
When computing the pin configuration register offset the bias setup code erroneously compares the pin number range with the loop index instead of the pin number. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-11-25sh-pfc: r8a7791: Fix DU pin groups organisationLaurent Pinchart1-9/+27
Rename the sync_1 group to sync as the device has a single sync pin group for the DU, move the cde_disp mux array right after the corresponding pins array, and split the clk_in pins in three separate groups as the pins can be used independently. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-27pinctrl: sh-pfc: r8a7791 PFC supportHisashi Nakamura5-0/+4230
Add PFC support for the r8a7791 SoC V2 including pin groups for on-chip devices such as MSIOF, SCIF, USB, MMC, SDHI, DU. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Kunihito Higashiyama <kunihito.higashiyama.ur@renesas.com> Signed-off-by: Yoshikazu Fujikawa <yoshikazu.fujikawa.ue@renesas.com> Signed-off-by: Nobuyuki HIRAI <nobuyuki.hirai.xe@renesas.com> Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> [damm@opensource.se: Forward ported to upstream, minor fixes] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-10-27sh-pfc: r8a7778: Add CAN pin groupsSergei Shtylyov1-0/+55
Add CAN data and clock pin groups to R8A7778 PFC driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-27sh-pfc: r8a7790: add pin definitions for the I2C3 interfaceGuennadi Liakhovetski1-0/+28
There are four I2C interfaces on r8a7790, each of them can be connected to one of the two respective I2C controllers, e.g. interface #0 can be configured to work with I2C0 or with IIC0. Additionally some of those interfaces can also use one of several pin sets. Interface #3 is special, because it can be used in automatic mode for DVFS. It only has one set of pins available and those pins cannot be used for anything else, they also lack the GPIO function. This patch uses the sh-pfc ability to configure pins, not associated with GPIOs and adds support for I2C3 to the r8a7790 PFC set up. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-24sh-pfc: r8a7790: Add I2C pin groups and functionsUlrich Hecht1-0/+82
Adds pinmux for i2c bus 1 and 2. (Pins for 0 and 3 are not multiplexed.) Signed-off-by: Ulrich Hecht <ulrich.hecht@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-09-24sh-pfc: r8a7778: Add SRU/SSI pin supportKuninori Morimoto1-0/+125
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-08-29Merge tag 'v3.11-rc7' into develLinus Walleij1-0/+1
Merged in this to avoid conflicts with the big locking fixes from upstream. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Conflicts: drivers/pinctrl/pinctrl-sunxi.c
2013-08-28pinctrl: sh-pfc: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 14:48:38 +0000