summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/qcom
AgeCommit message (Collapse)AuthorFilesLines
2020-06-20pinctrl: qcom: ipq6018 Add missing pins in qpic pin groupSivaprakash Murugesan1-1/+2
The patch adds missing qpic data pins to qpic pingroup. These pins are necessary for the qpic nand to work. Fixes: ef1ea54eab0e ("pinctrl: qcom: Add ipq6018 pinctrl driver") Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: qcom: spmi-gpio: fix warning about irq chip reusageDmitry Baryshkov1-11/+10
Fix the following warnings caused by reusage of the same irq_chip instance for all spmi-gpio gpio_irq_chip instances. Instead embed irq_chip into pmic_gpio_state struct. gpio gpiochip2: (c440000.qcom,spmi:pmic@2:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip3: (c440000.qcom,spmi:pmic@4:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip4: (c440000.qcom,spmi:pmic@a:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200604002817.667160-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-07Merge tag 'pinctrl-v5.8-1' of ↵Linus Torvalds4-1/+1371
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.8 kernel cycle. It's just really boring this time. Zero core changes. Just linear development, cleanups and misc noncritical fixes. Some new drivers for very new Qualcomm and Intel chips. New drivers: - Intel Jasper Lake support. - NXP Freescale i.MX8DXL support. - Qualcomm SM8250 support. - Renesas R8A7742 SH-PFC support. Driver improvements: - Severe cleanup and modernization of the MCP23s08 driver. - Mediatek driver modularized. - Setting config supported in the Meson driver. - Wakeup support for the Broadcom BCM7211" * tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: sprd: Fix the incorrect pull-up definition pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()' pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()' pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe() pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()' pinctrl: bcm2835: Add support for wake-up interrupts pinctrl: bcm2835: Match BCM7211 compatible string dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt dt-bindings: pinctrl: stm32: Add missing interrupts property pinctrl: at91-pio4: Add COMPILE_TEST support pinctrl: Fix return value about devm_platform_ioremap_resource() MAINTAINERS: Renesas Pin Controllers are supported dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2 pinctrl: ocelot: Remove instance number from pin functions pinctrl: ocelot: Always register GPIO driver dt-bindings: pinctrl: rockchip: update example pinctrl: amd: Add ACPI dependency ...
2020-05-12pinctrl: qcom: Add affinity callbacks to msmgpio IRQ chipVenkata Narendra Kumar Gutta1-0/+25
Wakeup capable GPIO IRQs routed via PDC are not being migrated when a CPU is hotplugged. Add affinity callbacks to msmgpio IRQ chip to update the affinity of wakeup capable IRQs. Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> [mkshah: updated commit text and minor code fixes] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1588314617-4556-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-28pinctrl: qcom: Add sm8250 pinctrl driver.Venkata Narendra Kumar Gutta3-0/+1371
Add initial Qualcomm SM8250 pinctrl driver to support pin configuration with pinctrl framework for SM8250 SoC. Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org> Link: https://lore.kernel.org/r/1586477057-7636-2-git-send-email-vnkgutta@codeaurora.org [bjorn: Regrouped functions, upstream tiles implementation, dropped downstream-only features] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200417061907.1226490-3-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-17pinctrl: qcom: Remove duplicated include from pinctrl-msm.cYueHaibing1-1/+0
Remove duplicated include. Fixes: 13bec8d49bdf ("pinctrl: qcom: use scm_call to route GPIO irq to Apps") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200408070504.134847-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-16pinctrl: qcom: fix wrong write in update_dual_edgeAnsuel Smith1-1/+1
Fix a typo in the readl/writel accessor conversion where val is used instead of pol changing the behavior of the original code. Cc: stable@vger.kernel.org Fixes: 6c73698904aa pinctrl: qcom: Introduce readl/writel accessors Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200414003726.25347-1-ansuelsmth@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-02Merge tag 'pinctrl-v5.7-1' of ↵Linus Torvalds5-13/+1161
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.7 kernel cycle. There are no core changes this time, only driver developments: - New driver for the Dialog Semiconductor DA9062 Power Management Integrated Circuit (PMIC). - Renesas SH-PFC has improved consistency, with group and register checks in the configuration checker. - New subdriver for the Qualcomm IPQ6018. - Add the RGMII pin control functionality to Qualcomm IPQ8064. - Performance and code quality cleanups in the Mediatek driver. - Improve the Broadcom BCM2835 support to cover all the GPIOs that exist in it. - The Allwinner/Sunxi driver properly masks non-wakeup IRQs on suspend. - Add some missing groups and functions to the Ingenic driver. - Convert some of the Freescale device tree bindings to use the new and all improved JSON YAML markup. - Refactorings and support for the SFIO/GPIO in the Tegra194 SoC driver. - Support high impedance mode in the Spreadtrum/Unisoc driver" * tag 'pinctrl-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (64 commits) pinctrl: qcom: fix compilation error pinctrl: qcom: use scm_call to route GPIO irq to Apps pinctrl: sprd: Add pin high impedance mode support pinctrl: sprd: Use the correct pin output configuration pinctrl: tegra: Add SFIO/GPIO programming on Tegra194 pinctrl: tegra: Renumber the GG.0 and GG.1 pins pinctrl: tegra: Do not add default pin range on Tegra194 pinctrl: tegra: Pass struct tegra_pmx for pin range check pinctrl: tegra: Fix "Scmitt" -> "Schmitt" typo pinctrl: tegra: Fix whitespace issues for improved readability pinctrl: mediatek: Use scnprintf() for avoiding potential buffer overflow pinctrl: freescale: drop the dependency on ARM64 for i.MX8M Revert "pinctrl: mvebu: armada-37xx: use use platform api" dt-bindings: pinctrl: at91: Fix a typo ("descibe") pinctrl: meson: add tsin pinctrl for meson gxbb/gxl/gxm pinctrl: sprd: Fix the kconfig warning pinctrl: ingenic: add hdmi-ddc pin control group pinctrl: sirf/atlas7: Replace zero-length array with flexible-array member pinctrl: sprd: Allow the SPRD pinctrl driver building into a module pinctrl: Export some needed symbols at module load time ...
2020-03-31pinctrl: qcom: fix compilation errorAnsuel Smith1-1/+0
pinctrl: qcom: use scm_call to route GPIO irq to Apps has a typo in the patch and introduced a compilation error. Fixes: 13bec8d4 pinctrl: qcom: use scm_call to route GPIO irq to Apps Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200331134603.13513-1-ansuelsmth@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-28pinctrl: qcom: use scm_call to route GPIO irq to AppsAjay Kishore1-6/+37
For IPQ806x targets, TZ protects the registers that are used to configure the routing of interrupts to a target processor. To resolve this, this patch uses scm call to route GPIO interrupts to application processor. Also the scm call interface is changed. Signed-off-by: Ajay Kishore <akisho@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200327223209.20409-1-ansuelsmth@gmail.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: qcom: Assign irq_eoi conditionallyLinus Walleij1-2/+1
The hierarchical parts of MSM pinctrl/GPIO is only used when the device tree has a "wakeup-parent" as a phandle, but the .irq_eoi is anyway assigned leading to semantic problems on elder Qualcomm chipsets. When the drivers/mfd/qcom-pm8xxx.c driver calls chained_irq_exit() that call will in turn call chip->irq_eoi() which is set to irq_chip_eoi_parent() by default on a hierachical IRQ chip, and the parent is pinctrl-msm.c so that will in turn unconditionally call irq_chip_eoi_parent() again, but its parent is invalid so we get the following crash: Unnable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = (ptrval) [00000010] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (...) PC is at irq_chip_eoi_parent+0x4/0x10 LR is at pm8xxx_irq_handler+0x1b4/0x2d8 If we solve this crash by avoiding to call up to irq_chip_eoi_parent(), the machine will hang and get reset by the watchdog, because of semantic issues, probably inside irq_chip. As a solution, just assign the .irq_eoi conditionally if we are actually using a wakeup parent. Cc: David Heidelberg <david@ixit.cz> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: stable@vger.kernel.org Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Link: https://lore.kernel.org/r/20200306121221.1231296-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309125207.571840-1-linus.walleij@linaro.org Link: https://lore.kernel.org/r/20200309152604.585112-1-linus.walleij@linaro.org Tested-by: David Heidelberg <david@ixit.cz> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-09pinctrl: qcom: ssbi-gpio: Fix fwspec parsing bugLinus Walleij1-1/+1
We are parsing SSBI gpios as fourcell fwspecs but they are twocell. Probably a simple copy-and-paste bug. Tested on the APQ8060 DragonBoard and after this ethernet and MMC card detection works again. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable@vger.kernel.org Reviewed-by: Brian Masney <masneyb@onstation.org> Fixes: ae436fe81053 ("pinctrl: ssbi-gpio: convert to hierarchical IRQ helpers in gpio core") Link: https://lore.kernel.org/r/20200306143416.1476250-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21ipq8064: pinctrl: Fixed missing RGMII pincontrol definitionsAnsuel Smith1-5/+5
Add missing gpio definition for mdio and rgmii2. Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Link: https://lore.kernel.org/r/20200219175940.744-1-ansuelsmth@gmail.com Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-2/+2
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-14pinctrl: qcom: Add ipq6018 pinctrl driverSricharan R3-0/+1118
Add initial pinctrl driver to support pin configuration with pinctrl framework for ipq6018. Co-developed-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> Signed-off-by: Rajkumar Ayyasamy <arajkuma@codeaurora.org> Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org> Co-developed-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Link: https://lore.kernel.org/r/1579439601-14810-3-git-send-email-sricharan@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-29Merge tag 'pinctrl-v5.6-1' of ↵Linus Torvalds5-28/+61
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes, nothing too exciting about this. Some changes hit arch/sh and arch/arm but are well isolated and acknowledged by the respective arch maintainers. Core changes: - Dropped the chained IRQ setup callback into GPIOLIB as we got rid of the last users of that in this changeset. New drivers: - New driver for Ingenic X1830. - New driver for Freescale i.MX8MP. Driver enhancements: - Fix all remaining Intel drivers to pass their IRQ chips along with the GPIO chips. - Intel Baytrail allocates its irqchip dynamically. - Intel Lynxpoint is thoroughly rewritten and modernized. - Aspeed AST2600 pin muxing and configuration is much improved. - Qualcomm SC7180 functions are updated and wakeup interrupt map is provided. - A whole slew of Renesas SH-PFC cleanups and improvements. - Fix up the Intel DT bindings to use the generic YAML DT bindings schema (a first user of this)" * tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: madera: Remove extra blank line pinctrl: qcom: Don't lock around irq_set_irq_wake() pinctrl: mvebu: armada-37xx: use use platform api gpio: Drop the chained IRQ handler assign function pinctrl: freescale: Add i.MX8MP pinctrl driver support dt-bindings: imx: Add pinctrl binding doc for i.MX8MP pinctrl: tigerlake: Tiger Lake uses _HID enumeration pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID pinctrl: iproc: Use platform_get_irq_optional() to avoid error message pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema pinctrl: intel: Pass irqchip when adding gpiochip pinctrl: intel: Add GPIO <-> pin mapping ranges via callback pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins pinctrl: sunrisepoint: Add missing Interrupt Status register offset pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers pinctrl: artpec6: fix __iomem on reg in set pinctrl: ingenic: Use devm_platform_ioremap_resource() pinctrl: ingenic: Factorize irq_set_type function pinctrl: ingenic: Remove duplicated ingenic_chip_info structures ...
2020-01-24pinctrl: qcom: Don't lock around irq_set_irq_wake()Stephen Boyd1-5/+0
We don't need to hold the local pinctrl lock here to set irq wake on the summary irq line. Doing so only leads to lockdep warnings instead of protecting us from anything. Remove the locking. WARNING: possible circular locking dependency detected 5.4.11 #2 Tainted: G W ------------------------------------------------------ cat/3083 is trying to acquire lock: ffffff81f4fa58c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pctrl->lock){-.-.}: _raw_spin_lock_irqsave+0x64/0x80 msm_gpio_irq_ack+0x68/0xf4 __irq_do_set_handler+0xe0/0x180 __irq_set_handler+0x60/0x9c irq_domain_set_info+0x90/0xb4 gpiochip_hierarchy_irq_domain_alloc+0x110/0x200 __irq_domain_alloc_irqs+0x130/0x29c irq_create_fwspec_mapping+0x1f0/0x300 irq_create_of_mapping+0x70/0x98 of_irq_get+0xa4/0xd4 spi_drv_probe+0x4c/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 __device_attach_driver+0x9c/0x110 bus_for_each_drv+0x88/0xd0 __device_attach+0xb0/0x160 device_initial_probe+0x20/0x2c bus_probe_device+0x34/0x94 device_add+0x35c/0x3f0 spi_add_device+0xbc/0x194 of_register_spi_devices+0x2c8/0x408 spi_register_controller+0x57c/0x6fc spi_geni_probe+0x260/0x328 platform_drv_probe+0x90/0xb0 really_probe+0x138/0x3f0 driver_probe_device+0x70/0x140 device_driver_attach+0x4c/0x6c __driver_attach+0xcc/0x154 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0x108/0x1fc driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 spi_geni_driver_init+0x1c/0x24 do_one_initcall+0x1a4/0x3e8 do_initcall_level+0xb4/0xcc do_basic_setup+0x30/0x48 kernel_init_freeable+0x124/0x1a8 kernel_init+0x14/0x100 ret_from_fork+0x10/0x18 -> #0 (&irq_desc_lock_class){-.-.}: __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pctrl->lock); lock(&irq_desc_lock_class); lock(&pctrl->lock); lock(&irq_desc_lock_class); *** DEADLOCK *** 7 locks held by cat/3083: #0: ffffff81f06d1420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4 #1: ffffff81c8935680 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc #3: ffffffe89a641d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348 #4: ffffff81f190e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c #5: ffffff81f183d8c0 (lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 #6: ffffff81f4880c18 (&pctrl->lock){-.-.}, at: msm_gpio_irq_set_wake+0x48/0x7c stack backtrace: CPU: 4 PID: 3083 Comm: cat Tainted: G W 5.4.11 #2 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 print_circular_bug+0x2ac/0x2c4 check_noncircular+0x1a0/0x1a8 __lock_acquire+0xeb4/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 msm_gpio_irq_set_wake+0x5c/0x7c set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 cros_ec_rtc_suspend+0x38/0x4c platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc Fixes: 6aced33f4974 ("pinctrl: msm: drop wake_irqs bitmap") Cc: Douglas Anderson <dianders@chromium.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200121180950.36959-1-swboyd@chromium.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-15gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as argKevin Hao2-2/+2
Some gpio's parent irqdomain may not use the struct irq_fwspec as argument, such as msi irqdomain. So rename the callback populate_parent_fwspec() to populate_parent_alloc_arg() and make it allocate and populate the specific struct which is needed by the parent irqdomain. Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200114082821.14015-3-haokexin@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: qcom: ssbi-gpio: constify copied structureJulia Lawall1-1/+1
The pm8xxx_pinctrl_desc structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1577864614-5543-15-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: ssbi-mpp: constify copied structureJulia Lawall1-1/+1
The pm8xxx_pinctrl_desc structure is only copied into another structure, so make it const. The opportunity for this change was found using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1577864614-5543-9-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: qcom: make 'm_voc_groups' staticBen Dooks (Codethink)1-1/+1
The m_voc_groups is not declared outside of the driver, so make it static to avoid the following sparse wanrning: drivers/pinctrl/qcom/pinctrl-msm8976.c:592:12: warning: symbol 'm_voc_groups' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191218102804.2487374-1-ben.dooks@codethink.co.uk Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-16pinctrl: qcom: sc7180: Add new qup functionsRajendra Nayak1-20/+40
on sc7180 we have cases where multiple functions from the same qup instance share the same pin. This is true for qup02/04/11 and qup13. Add new function names to distinguish which qup function to use. The device tree files for this platform haven't landed in mainline yet, so there aren't any users upstream who should break with this change in function names, however, anyone using the devicetree files that were posted on the lists and using these specific function names will need to update their changes. Reported-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/0101016ef36a9118-f2919277-effa-4cd5-adf8-bbc8016f31df-000000@us-west-2.amazonses.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-16pinctrl: qcom: sc7180: Add GPIO wakeup interrupt mapMaulik Shah1-0/+18
GPIOs that can be configured as wakeup sources, have their interrupt lines routed to PDC interrupt controller. Provide the interrupt map of the GPIO to its wakeup capable interrupt parent. Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1572419178-5750-2-git-send-email-mkshah@codeaurora.org Reviewed-by: Lina Iyer <ilina@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds3-3/+146
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-11-21pinctrl: Fix Kconfig indentationKrzysztof Kozlowski1-46/+46
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306382-32516-1-git-send-email-krzk@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-16pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOsLina Iyer1-1/+22
Add interrupt parents for wakeup capable GPIOs for Qualcomm SDM845 SoC. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-10-git-send-email-ilina@codeaurora.org
2019-11-16pinctrl/msm: Setup GPIO chip in hierarchyLina Iyer2-2/+124
Some GPIOs are marked as wakeup capable and are routed to another interrupt controller that is an always-domain and can detect interrupts even when most of the SoC is powered off. The wakeup interrupt controller wakes up the GIC and replays the interrupt at the GIC. Setup the TLMM irqchip in hierarchy with the wakeup interrupt controller and ensure the wakeup GPIOs are handled correctly. Co-developed-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-9-git-send-email-ilina@codeaurora.org ---- Changes in v2: - Address review comments - Fix Co-developed-by tag Changes in v1: - Address minor review comments - Remove redundant call to set irq handler - Move irq_domain_qcom_handle_wakeup() to this patch Changes in RFC v2: - Rebase on top of GPIO hierarchy support in linux-next - Set the chained irq handler for summary line
2019-11-05pinctrl: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-2/+1
devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible stringsAngeloGioacchino Del Regno1-0/+2
PM8950 and PMI8950 have four MPPs and this driver is compatible. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191031103507.30678-4-kholk11@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: qcom: spmi-gpio: Add PM/PMI8950 compatibilityAngeloGioacchino Del Regno1-0/+3
The PM8950 features 8 GPIOs with hole in 3 and PMI8950 has only two; these PMICs are totally compatible with this driver. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191031103507.30678-2-kholk11@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESETRajendra Nayak1-8/+10
The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to calculate the right register offsets. Adding them here and also adjusting the offsets accordingly. Fixes: f2ae04c45b1a ("pinctrl: qcom: Add SC7180 pinctrl driver") Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/20191021141507.24066-1-rnayak@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956AngeloGioacchino Del Regno3-0/+1138
Add the pinctrl driver to support pin configuration with the pinctrl framework on MSM8976, MSM8956, APQ8056, APQ8076. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191005105936.31216-2-kholk11@gmail.com Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150lKiran Gunda1-0/+2
Add support for the PM6150 and PM6150L GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570188039-22122-1-git-send-email-kgunda@codeaurora.org Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-03pinctrl: ssbi-gpio: convert to hierarchical IRQ helpers in gpio coreBrian Masney2-88/+34
Now that the GPIO core has support for hierarchical IRQ chips, convert Qualcomm's ssbi-gpio over to use these new helpers to reduce duplicated code across drivers. Signed-off-by: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20190914111010.24384-1-masneyb@onstation.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-19Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds9-87/+1204
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-04pinctrl: qcom: sdm845: Fix UFS_RESET pinStephen Boyd1-4/+4
The UFS_RESET pin is the magical pin #150 now, not 153 per the sdm845_groups array declared in this file. Fix the order of pins so that UFS_RESET is 150 and the SDC pins follow after. Fixes: 53a5372ce326 ("pinctrl: qcom: sdm845: Expose ufs_reset as gpio") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190830060227.12792-1-swboyd@chromium.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l supportVinod Koul1-0/+2
Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-3-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b supportVinod Koul1-0/+2
Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-2-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 supportVinod Koul1-0/+2
Add support for the PM8150 GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-1-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-20gpio: Use callback presence to determine need of valid_maskLinus Walleij1-2/+2
After we switched the two drivers that have .need_valid_mask set to use the callback for setting up the .valid_mask, we can just use the presence of the .init_valid_mask() callback (or the OF reserved ranges, nota bene) to determine whether to allocate the mask or not and we can drop the .need_valid_mask field altogether. Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190819093058.10863-1-linus.walleij@linaro.org
2019-08-20gpio: Pass mask and size with the init_valid_mask()Linus Walleij1-9/+10
It is more helpful for drivers to have the affected fields directly available when we use the callback to set up the valid mask. Change this and switch over the only user (MSM) to use the passed parameters. If we do this we can also move the mask out of publicly visible struct fields. Cc: Stephen Boyd <swboyd@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190819084904.30027-1-linus.walleij@linaro.or Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-15qcom: spmi-gpio: convert to hierarchical IRQ helpers in gpio coreBrian Masney2-67/+26
Now that the GPIO core has support for hierarchical IRQ chips, convert Qualcomm's spmi-gpio over to use these new helpers to reduce duplicated code across drivers. This change was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190808123242.5359-3-linus.walleij@linaro.org
2019-08-07pinctrl: qcom: Add SC7180 pinctrl driverJitendra Sharma3-0/+1156
Add initial pinctrl driver to support pin configuration with pinctrl framework for SC7180 Signed-off-by: Jitendra Sharma <shajit@codeaurora.org> Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> [rnayak: modify to use upstream tile support sort and squash some functions] Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190806060536.18094-2-rnayak@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: Remove dev_err() usage after platform_get_irq()Stephen Boyd2-7/+2
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-34-swboyd@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: qcom: spmi-gpio: Mark expected switch fall-throughAnders Roxell1-0/+2
When fall-through warnings was enabled by default the following warnings was starting to show up: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c: In function ‘pmic_gpio_populate’: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:815:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:816:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_4CH: ^~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:820:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:821:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_8CH: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20190726112816.19723-1-anders.roxell@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: qdf2xxx: Switch to use device_property_count_uXX()Andy Shevchenko1-1/+1
Use use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723192738.68486-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-05pinctrl: msm: Switch to use device_property_count_uXX()Andy Shevchenko1-3/+2
Use use device_property_count_uXX() directly, that makes code neater. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190723192738.68486-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: msm8998: Squash TSIF pins togetherMarc Gonzalez1-58/+18
TSIF is the Transport Stream Interface. First, rename tsif1 to tsif0, and tsif2 to tsif1. Then squash all 5 tsif0 pins into a single function. Same for tsif1. Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Link: https://lore.kernel.org/r/503b2ae8-ead6-70cd-7b21-ce5f5166a23a@free.fr Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29pinctrl: qcom: Pass irqchip when adding gpiochipLinus Walleij1-14/+13
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For chained irqchips this is a pretty straight-forward conversion. Cc: Thierry Reding <treding@nvidia.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Lina Iyer <ilina@codeaurora.org> Link: https://lore.kernel.org/r/20190724083828.7496-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-13Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds6-8/+1642
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...