summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2022-08-10Merge tag 'pinctrl-v6.0-1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Outside the pinctrl driver and DT bindings we hit some Arm DT files, patched by the maintainers. Other than that it is business as usual. Core changes: - Add PINCTRL_PINGROUP() helper macro (and use it in the AMD driver). New drivers: - Intel Meteor Lake support. - Reneasas RZ/V2M and r8a779g0 (R-Car V4H). - AXP209 variants AXP221, AXP223 and AXP809. - Qualcomm MSM8909, PM8226, PMP8074 and SM6375. - Allwinner D1. Improvements: - Proper pin multiplexing in the AMD driver. - Mediatek MT8192 can use generic drive strength and pin bias, then fixes on top plus some I2C pin group fixes. - Have the Allwinner Sunplus SP7021 use the generic DT schema and make interrupts optional. - Handle Qualcomm SC7280 ADSP. - Handle Qualcomm MSM8916 CAMSS GP clock muxing. - High impedance bias on ZynqMP. - Serialize StarFive access to MMIO. - Immutable gpiochip for BCM2835, Ingenic, Qualcomm SPMI GPIO" * tag 'pinctrl-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (117 commits) dt-bindings: pinctrl: qcom,pmic-gpio: add PM8226 constraints pinctrl: qcom: Make PINCTRL_SM8450 depend on PINCTRL_MSM pinctrl: qcom: sm8250: Fix PDC map pinctrl: amd: Fix an unused variable dt-bindings: pinctrl: mt8186: Add and use drive-strength-microamp dt-bindings: pinctrl: mt8186: Add gpio-line-names property ARM: dts: imxrt1170-pinfunc: Add pinctrl binding header pinctrl: amd: Use unicode for debugfs output pinctrl: amd: Fix newline declaration in debugfs output pinctrl: at91: Fix typo 'the the' in comment dt-bindings: pinctrl: st,stm32: Correct 'resets' property name pinctrl: mvebu: Missing a blank line after declarations. pinctrl: qcom: Add SM6375 TLMM driver dt-bindings: pinctrl: Add DT schema for SM6375 TLMM dt-bindings: pinctrl: mt8195: Use drive-strength-microamp in examples Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable" pinctrl: imx93: Add MODULE_DEVICE_TABLE() pinctrl: sunxi: Add driver for Allwinner D1 pinctrl: sunxi: Make some layout parameters dynamic pinctrl: sunxi: Refactor register/offset calculation ...
2022-07-18Revert "pinctrl: qcom: spmi-gpio: make the irqchip immutable"Linus Walleij1-12/+10
This reverts commit 7542766e78fc374d81d8c2db214c4b4308645277. It was noted during follow-up that the approach is incorrect. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-18pinctrl: qcom-pmic-gpio: add support for PMP8074Robert Marko1-0/+2
PMP8074 has 12 GPIO-s with holes on GPIO1 and GPIO12. Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220711203408.2949888-4-robimarko@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-18pinctrl: qcom: spmi-gpio: Add pm8226 compatibilityDominik Kobinski1-0/+1
Add support for pm8226 SPMI GPIOs. The PMIC features 8 GPIOs, with no holes inbetween. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> Link: https://lore.kernel.org/r/20211125215310.62371-1-dominikkobinski314@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-10gpio: Remove dynamic allocation from populate_parent_alloc_arg()Marc Zyngier1-9/+6
The gpiolib is unique in the way it uses intermediate fwspecs when feeding an interrupt specifier to the parent domain, as it relies on the populate_parent_alloc_arg() callback to perform a dynamic allocation. This is pretty inefficient (we free the structure almost immediately), and the only reason this isn't a stack allocation is that our ThunderX friend uses MSIs rather than a FW-constructed structure. Let's solve it by providing a new type composed of the union of a struct irq_fwspec and a msi_info_t, which satisfies both requirements. This allows us to use a stack allocation, and we can move the handful of users to this new scheme. Also perform some additional cleanup, such as getting rid of the stub versions of the irq_domain_translate_*cell helpers, which are never used when CONFIG_IRQ_DOMAIN_HIERARCHY isn't selected. Tested on a Tegra186. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Daniel Palmer <daniel@thingy.jp> Cc: Romain Perier <romain.perier@gmail.com> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Robert Richter <rric@kernel.org> Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Bartosz Golaszewski <brgl@bgdev.pl> Link: https://lore.kernel.org/r/20220707182314.66610-2-prabhakar.mahadev-lad.rj@bp.renesas.com
2022-07-10pinctrl: qcom: spmi-gpio: make the irqchip immutableRobert Marko1-10/+12
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warning is now observed for the SPMI PMIC pinctrl driver: gpio gpiochip1: (200f000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the SPMI PMIC pinctrl driver immutable. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20220624195112.894916-1-robimarko@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-05-19pinctrl: qcom: spmi-gpio: Add pm6125 compatibleMarijn Suijten1-0/+1
The pm6125 has 9 GPIOs with no holes inbetween. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220511220613.1015472-4-marijn.suijten@somainline.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-04-21pinctrl: qcom-pmic-gpio: Add support for pmx65Rohit Agarwal1-0/+1
PMX65 pmic support gpio controller so add compatible. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Link: https://lore.kernel.org/r/1649048650-14059-3-git-send-email-quic_rohiagar@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-03-24pinctrl: qcom-pmic-gpio: Add support for pm8450Dmitry Baryshkov1-0/+1
PM8450 provides 4 GPIOs. Add a compatible entry for this GPIO block. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220315091106.613153-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-22pinctrl: spmi-gpio: Add support for PM2250Loic Poulain1-0/+1
PM2250, commonly combined with QCM2290, provides ten SPMI GPIOs. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1637076915-3280-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-22pinctrl: qcom-pmic-gpio: Add support for pm8019Konrad Dybcio1-0/+1
PM8019 provides 6 GPIOs. Add a compatible to support that. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211112115342.17100-2-konrad.dybcio@somainline.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-11-05Merge tag 'pinctrl-v5.16-1' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "The most interesting aspect is that we now have initial support for the Apple pin controller as used in the M1 laptops and the iPhones which is a step forward for using Linux efficiently on this Apple silicon. Core changes: - Add infrastructure for per-parent interrupt data to support the Apple pin controller. New drivers: - New combined pin control and GPIO driver for the Apple SoC. This is used in all modern Apple silicon such as the M1 laptops but also in at least recent iPhone variants. - New subdriver for the Qualcomm SM6350 - New subdriver for the Qualcomm QCM2290 - New subdriver for the Qualcomm PM6350 - New subdriver for the Uniphier NX1 - New subdriver for the Samsung ExynosAutoV9 - New subdriver for the Mediatek MT7986 - New subdriver for the nVidia Tegra194 Improvements: - Improve power management in the Mediatek driver. - Improvements to the Renesas internal consistency checker. - Convert the Rockchip pin control device tree bindings to YAML. - Finally convert the Qualcomm PMIC SSBI and SPMI MPP GPIO driver to use hierarchical interrupts. - Convert the Qualcomm PMIC MPP device tree bindings to YAML" * tag 'pinctrl-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (55 commits) pinctrl: add pinctrl/GPIO driver for Apple SoCs dt-bindings: pinctrl: Add apple,npins property to apple,pinctrl dt-bindings: pinctrl: add #interrupt-cells to apple,pinctrl gpio: Allow per-parent interrupt data pinctrl: tegra: Fix warnings and error pinctrl: intel: Kconfig: Add configuration menu to Intel pin control pinctrl: tegra: Use correct offset for pin group pinctrl: core: fix possible memory leak in pinctrl_enable() pinctrl: bcm2835: Allow building driver as a module pinctrl: equilibrium: Fix function addition in multiple groups pinctrl: tegra: Add pinmux support for Tegra194 pinctrl: tegra: include lpdr pin properties pinctrl: mediatek: add support for MT7986 SoC dt-bindings: pinctrl: update bindings for MT7986 SoC pinctrl: microchip sgpio: use reset driver dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add reset binding dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells pinctrl: qcom: spmi-mpp: add support for hierarchical IRQ chip pinctrl: qcom: spmi-mpp: hardcode IRQ counts pinctrl: qcom: ssbi-mpp: add support for hierarchical IRQ chip ...
2021-10-13pinctrl: qcom: spmi-gpio: Add compatible for PM6350Luca Weiss1-0/+1
Add support for the GPIO controller in the pm6350 PMIC. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20211007212444.328034-6-luca@z3ntu.xyz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-10-03pinctrl: qcom: spmi-gpio: add support to enable/disable outputSubbaraman Narayanamurthy1-0/+6
Currently, if the GPIO is configured as output in the bootloader and user changes the mode to input in HLOS, it would end up getting configured as input/output. Functionally, this is fine; however, there may be some requirements where the output needs to be disabled so that it can be used only for input. Add support to enable/disable output mode through "output-enable" or "output-disable" pinctrl properties. Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1631588246-4811-3-git-send-email-quic_subbaram@quicinc.com [Drop copyright change which is already upstrean in -rcN] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-09-17pinctrl: qcom: spmi-gpio: correct parent irqspec translationDavid Collins1-3/+34
pmic_gpio_child_to_parent_hwirq() and gpiochip_populate_parent_fwspec_fourcell() translate a pinctrl- spmi-gpio irqspec to an SPMI controller irqspec. When they do this, they use a fixed SPMI slave ID of 0 and a fixed GPIO peripheral offset of 0xC0 (corresponding to SPMI address 0xC000). This translation results in an incorrect irqspec for secondary PMICs that don't have a slave ID of 0 as well as for PMIC chips which have GPIO peripherals located at a base address other than 0xC000. Correct this issue by passing the slave ID of the pinctrl-spmi- gpio device's parent in the SPMI controller irqspec and by calculating the peripheral ID base from the device tree 'reg' property of the pinctrl-spmi-gpio device. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: satya priya <skakit@codeaurora.org> Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1631798498-10864-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-08-10pinctrl: qcom: spmi-gpio: Add pmc8180 & pmc8180cBjorn Andersson1-0/+2
The SC8180x platform comes with PMC8180 and PMC8180c, add support for the GPIO controller in these PMICs. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210629003851.1787673-1-bjorn.andersson@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-23pinctrl: qcom/pinctrl-spmi-gpio: Add compatible for pmic-gpio on SA8155p-adpBhupesh Sharma1-0/+1
SA8155p-adp PMIC (PMM8155AU) exposes 10 GPIOs. Add support for the same in the pinctrl driver. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210629123407.82561-5-bhupesh.sharma@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-07-23pinctrl: qcom/pinctrl-spmi-gpio: Arrange compatibles alphabeticallyBhupesh Sharma1-17/+17
Arrange the compatibles inside qcom pinctrl-spmi gpio driver alphabetically. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20210629123407.82561-4-bhupesh.sharma@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-20pinctrl: qcom: spmi-gpio: Add support for pm7325satya priya1-0/+1
Add compatible string for PM7325 pmic GPIO support to the Qualcomm PMIC GPIO driver. Signed-off-by: satya priya <skakit@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1620817988-18809-2-git-send-email-skakit@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-08pinctrl: qcom-pmic-gpio: Add support for pm8008Guru Das Srinagesh1-0/+1
Add support for the two GPIOs present on Qualcomm Technologies, Inc. PM8008. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Link: https://lore.kernel.org/r/129d241ee510e28536d35dbfeee75474e12d8d22.1617901945.git.gurus@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-03-15pinctrl: qcom: spmi-gpio: Add support for PM8350 and friendsVinod Koul1-0/+6
Add support for the PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B GPIO support to the Qualcomm PMIC GPIO driver. Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210308164845.3210393-2-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04pinctrl: qcom-pmic-gpio: Add support for pmx55Vinod Koul1-0/+2
PM55 pmic support gpio controller so add compatible and comment for gpio holes Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201126092151.1082697-2-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-09Merge tag 'pinctrl-v5.9-1' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of the pin control changes for the v5.9 kernel series: Core changes: - The GPIO patch "gpiolib: Introduce for_each_requested_gpio_in_range() macro" was put in an immutable branch and merged into the pinctrl tree as well. We see these changes also here. - Improved debug output for pins used as GPIO. New drivers: - Ocelot Sparx5 SoC driver. - Intel Emmitsburg SoC subdriver. - Intel Tiger Lake-H SoC subdriver. - Qualcomm PM660 SoC subdriver. - Renesas SH-PFC R8A774E1 subdriver. Driver improvements: - Linear improvement and cleanups of the Intel drivers for Cherryview, Lynxpoint, Baytrail etc. Improved locking among other things. - Renesas SH-PFC has added support for RPC pins, groups, and functions to r8a77970 and r8a77980. - The newere Freescale (now NXP) i.MX8 pin controllers have been modularized. This is driven by the Google Android GKI initiative I think. - Open drain support for pins on the Qualcomm IPQ4019. - The Ingenic driver can handle both edges IRQ detection. - A big slew of documentation fixes all over the place. - A few irqchip template conversions by yours truly. * tag 'pinctrl-v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits) dt-bindings: pinctrl: add bindings for MediaTek MT6779 SoC pinctrl: stmfx: Use irqchip template pinctrl: amd: Use irqchip template pinctrl: mediatek: fix build for tristate changes pinctrl: samsung: Use bank name as irqchip name pinctrl: core: print gpio in pins debugfs file pinctrl: mediatek: add mt6779 eint support pinctrl: mediatek: add pinctrl support for MT6779 SoC pinctrl: mediatek: avoid virtual gpio trying to set reg pinctrl: mediatek: update pinmux definitions for mt6779 pinctrl: stm32: use the hwspin_lock_timeout_in_atomic() API pinctrl: mcp23s08: Use irqchip template pinctrl: sx150x: Use irqchip template dt-bindings: ingenic,pinctrl: Support pinmux/pinconf nodes pinctrl: intel: Add Intel Emmitsburg pin controller support pinctl: ti: iodelay: Replace HTTP links with HTTPS ones Revert "gpio: omap: handle pin config bias flags" pinctrl: single: Use fallthrough pseudo-keyword pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keyword pinctrl: baytrail: Use fallthrough pseudo-keyword ...
2020-07-20pinctrl: qcom: spmi-gpio: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200716212213.GA17623@embeddedor Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-07-07pinctrl: qcom: spmi-gpio: Add pm660(l) compatibilityKonrad Dybcio1-0/+4
Add support for pm660(l) SPMI GPIOs. The PMICs feature 13 and 12 GPIOs respectively, though with a lot of holes inbetween. Signed-off-by: Konrad Dybcio <konradybcio@gmail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200622192558.152828-2-konradybcio@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-06-16pinctrl: qcom: spmi-gpio: fix warning about irq chip reusageDmitry Baryshkov1-11/+10
Fix the following warnings caused by reusage of the same irq_chip instance for all spmi-gpio gpio_irq_chip instances. Instead embed irq_chip into pmic_gpio_state struct. gpio gpiochip2: (c440000.qcom,spmi:pmic@2:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip3: (c440000.qcom,spmi:pmic@4:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. gpio gpiochip4: (c440000.qcom,spmi:pmic@a:gpio@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200604002817.667160-1-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-15gpiolib: Add support for the irqdomain which doesn't use irq_fwspec as argKevin Hao1-1/+1
Some gpio's parent irqdomain may not use the struct irq_fwspec as argument, such as msi irqdomain. So rename the callback populate_parent_fwspec() to populate_parent_alloc_arg() and make it allocate and populate the specific struct which is needed by the parent irqdomain. Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20200114082821.14015-3-haokexin@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: qcom: spmi-gpio: Add PM/PMI8950 compatibilityAngeloGioacchino Del Regno1-0/+3
The PM8950 features 8 GPIOs with hole in 3 and PMI8950 has only two; these PMICs are totally compatible with this driver. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191031103507.30678-2-kholk11@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16dt-bindings: pinctrl: qcom-pmic-gpio: Add support for pm6150/pm6150lKiran Gunda1-0/+2
Add support for the PM6150 and PM6150L GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Link: https://lore.kernel.org/r/1570188039-22122-1-git-send-email-kgunda@codeaurora.org Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-09-19Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l supportVinod Koul1-0/+2
Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-3-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b supportVinod Koul1-0/+2
Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-2-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-23dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 supportVinod Koul1-0/+2
Add support for the PM8150 GPIO support to the Qualcomm PMIC GPIO binding. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20190814123512.6017-1-vkoul@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-15qcom: spmi-gpio: convert to hierarchical IRQ helpers in gpio coreBrian Masney1-67/+25
Now that the GPIO core has support for hierarchical IRQ chips, convert Qualcomm's spmi-gpio over to use these new helpers to reduce duplicated code across drivers. This change was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190808123242.5359-3-linus.walleij@linaro.org
2019-08-05pinctrl: qcom: spmi-gpio: Mark expected switch fall-throughAnders Roxell1-0/+2
When fall-through warnings was enabled by default the following warnings was starting to show up: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c: In function ‘pmic_gpio_populate’: ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:815:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:816:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_4CH: ^~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:820:20: warning: this statement may fall through [-Wimplicit-fallthrough=] pad->have_buffer = true; ~~~~~~~~~~~~~~~~~^~~~~~ ../drivers/pinctrl/qcom/pinctrl-spmi-gpio.c:821:2: note: here case PMIC_GPIO_SUBTYPE_GPIOC_8CH: ^~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20190726112816.19723-1-anders.roxell@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-11Merge tag 'pinctrl-v5.1-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ...
2019-02-21pinctrl: qcom: spmi-gpio: Reorder debug printBjorn Andersson1-1/+1
It's reasonable to expect that people turn to the "gpio" debugfs file to first and foremost learn about the direction and value of a gpio, and second to that about it's pinconf. So reorder the value so each line reads: gpioN: direction value ... This also makes it consistent with the TLMM pinctrl driver's output in the same dump. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13qcom: spmi-gpio: Fix boundary conditions IRQ domain translateBjorn Andersson1-1/+2
GPIOs on the SPMI PMIC are numbered 1..ngpio, so the boundary check in pmic_gpio_domain_translate() is off by one, correct this. Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24qcom: spmi-gpio: add support for hierarchical IRQ chipBrian Masney1-10/+105
spmi-gpio did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the spmi-gpio code to correct this issue. Driver was tested using the volume buttons (via gpio-keys) on the LG Nexus 5 (hammerhead) phone with the following two configurations. volume-up { interrupts-extended = <&pm8941_gpios 2 IRQ_TYPE_EDGE_BOTH>; ... }; volume-up { gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; ... }; Both configurations now show that spmi-gpio is the IRQ domain and that the IRQ is setup in a hierarchy. $ grep volume_up /proc/interrupts 72: 6 0 spmi-gpio 1 Edge volume_up $ cat /sys/kernel/debug/irq/irqs/72 handler: handle_edge_irq device: (null) status: 0x00000403 _IRQ_NOPROBE istate: 0x00000000 ddepth: 0 wdepth: 0 dstate: 0x02400203 IRQ_TYPE_EDGE_RISING IRQ_TYPE_EDGE_FALLING IRQD_ACTIVATED IRQD_IRQ_STARTED node: 0 affinity: 0-3 effectiv: domain: :soc:spmi@fc4cf000:pm8941@0:gpios@c000 hwirq: 0x1 chip: spmi-gpio flags: 0x4 IRQCHIP_MASK_ON_SUSPEND parent: domain: :soc:spmi@fc4cf000 hwirq: 0xc100057 chip: pmic_arb flags: 0x4 IRQCHIP_MASK_ON_SUSPEND Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-21pinctrl: qcom: spmi-gpio: hardcode IRQ countsBrian Masney1-17/+11
The probing of this driver calls platform_irq_count, which will setup all of the IRQs that are configured in device tree. In preparation for converting this driver to be a hierarchical IRQ chip, hardcode the IRQ count based on the hardware type so that all the IRQs are not configured immediately and are configured on an as-needed basis later in the boot process. This change will also allow for the removal of the interrupts property later in this patch series once the hierarchical IRQ chip support is in. This patch also removes the generic qcom,spmi-gpio OF match since we don't know the number of pins. All of the existing upstream bindings already include the more-specific binding. The pm8941 code was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-21pinctrl: qcom: spmi-gpio: add support for three new variantsBrian Masney1-0/+3
Add support for qcom,pm8005-gpio, qcom,pm8998-gpio, and qcom,pmi8998-gpio. These three variants are already in use in some arm64 dtsi files. Those boards work since the generic binding qcom,spmi-gpio is also specified. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-26pinctrl: qcom: spmi-gpio: add compatible for pms405 GPIOShawn Guo1-0/+1
Let's add "qcom,pms405-gpio" to match table, as commit ed80f6eb799a ("dt-bindings: pinctrl: qcom-pmic-gpio: Add pms405 support") already adds the compatible. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-09pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issuesBrian Masney1-4/+17
When attempting to setup up a gpio hog, device probing would repeatedly fail with -EPROBE_DEFERED errors. It was caused by a circular dependency between the gpio and pinctrl frameworks. If the gpio-ranges property is present in device tree, then the gpio framework will handle the gpio pin registration and eliminate the circular dependency. See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix gpio-hog related boot issues") for a detailed commit message that explains the issue in much more detail. The code comment in this commit came from Christian's commit. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: Include <linux/gpio/driver.h> nothing elseLinus Walleij1-1/+1
These drivers are GPIO drivers, and the do not need to use the legacy header in <linux/gpio.h>, go directly for <linux/gpio/driver.h> instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-09pinctrl: qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliantDouglas Anderson1-8/+24
If you do this on an sdm845 board: grep "" /sys/kernel/debug/pinctrl/*spmi:pmic*/pinconf-groups ...it looks like nonsense. For every pin you see listed: input bias disabled, input bias high impedance, input bias pull down, input bias pull up, ... That's because pmic_gpio_config_get() isn't complying with the rules that pinconf_generic_dump_one() expects. Specifically for boolean parameters (anything with a "struct pin_config_item" where has_arg is false) the function expects that the function should return its value not through the "config" parameter but should return "0" if the value is set and "-EINVAL" if the value isn't set. Let's fix this. From a quick sample of other pinctrl drivers, it appears to be tradition to also return 1 through the config parameter for these boolean parameters when they exist. I'm not one to knock tradition, so I'll follow tradition and return 1 in these cases. While I'm at it, I'll also continue searching for four leaf clovers, kocking on wood three times, and trying not to break mirrors. NOTE: This also fixes an apparent typo for reading PIN_CONFIG_BIAS_DISABLE where the old driver was accidentally using "=" instead of "==" and thus was setting some internal state when you tried to query PIN_CONFIG_BIAS_DISABLE. Oops. Fixes: eadff3024472 ("pinctrl: Qualcomm SPMI PMIC GPIO pin controller driver") Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08pinctrl: qcom: spmi-gpio: Add pmi8994 gpio supportRajendra Nayak1-0/+1
Update the binding and driver for pmi8994-gpios Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-11pinctrl: qcom: spmi-gpio: Update GPIO EN_CTL when setting pin configFenglin Wu1-0/+5
GPIO is expected to be disabled iff PIN_CONFIG_BIAS_HIGH_IMPEDANCE is configured. Update is_enabled flag in config_set() so that it can reflect GPIO status correctly. Also modify EN_CTL register based on is_enabled flag in config_set() to configure the GPIO properly. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: qcom: spmi-gpio: Correct power_source range checkFenglin Wu1-1/+1
Power source selection in DIG_VIN_CTL is indexed from 0, in the range check it shouldn't be equal to the total number of power sources. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-15pinctrl: qcom: spmi-gpio: Add dtest route for digital inputFenglin Wu1-0/+50
Add property "qcom,dtest-buffer" to specify which dtest rail to feed when the pin is configured as a digital input. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 04:56:53 +0000