summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/pinctrl-at91.c
AgeCommit message (Collapse)AuthorFilesLines
2018-01-03pinctrl: at91: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+1
at91_pinctrl_mux_mask() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-31pinctrl: at91: add support for OUTPUT configBoris BREZILLON1-0/+21
Add support for pin output control through the pinctrl config: - support enabling/disabling output on a given pin - support output level setting (high or low) Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl/at91: Don't provide a default trigger typeMarc Zyngier1-1/+1
at91 used to set a default trigger type for GPIO interrupts in order to cope with the old board files. These days are long gone, and it all gets probed through DT. Andras Szemzo reported that the Ethernet device on his board was bailing to be probed, due to a conflict in interrupt trigger. Surely enough, this is due to this default trigger still being present, and turning this into a IRQ_TYPE_NONE fixes the issue. Reported-by: Andras Szemzo <szemzo.andras@gmail.com> Tested-by: Andras Szemzo <szemzo.andras@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl: fix incorrect inline keyword in multiple driversArnd Bergmann1-1/+1
When building with 'make W=1', we get harmless warnings about five drivers in drivers/pinctrl, which all contain a copy of the same line: drivers/pinctrl/freescale/pinctrl-imx1-core.c:160:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] This replaces the somewhat nonstandard 'static const inline' with 'static inline const', which has the same meaning but does not cause this warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13pinctrl: at91: make it explicitly non-modularPaul Gortmaker1-11/+0
The Kconfig currently controlling compilation of this code is: drivers/pinctrl/Kconfig:config PINCTRL_AT91 drivers/pinctrl/Kconfig: bool "AT91 pinctrl driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not being used in this driver, we don't need to be concerned with initcall ordering changes when removing it. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-02pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enableAlexander Stein1-10/+3
This simplifies the normal as well as the error path. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-02pinctrl: at91: Make at91_gpio_template constAlexander Stein1-1/+1
This template is only assigned, so make it const. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: at91: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan1-11/+2
Use devm_pinctrl_register() for pin control registration and remove the need of .remove callback. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-17Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds1-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
2016-01-05pinctrl: at91: use gpiochip data pointerLinus Walleij1-15/+11
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10pinctrl: at91: Use platform_register/unregister_drivers()Thierry Reding1-7/+7
These new helpers simplify implementing multi-driver modules and properly handle failure to register one driver by unregistering all previously registered drivers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-1/+1
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-02Merge tag 'gpio-v4.4-1' of ↵Linus Torvalds1-24/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...
2015-10-27pinctrl: at91: add missing of_node_putJulia Lawall1-1/+4
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski1-24/+2
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-30pinctrl: at91: fix null pointer dereferenceDavid Dueck1-0/+15
Not all gpio banks are necessarily enabled, in the current code this can lead to null pointer dereferences. [ 51.130000] Unable to handle kernel NULL pointer dereference at virtual address 00000058 [ 51.130000] pgd = dee04000 [ 51.130000] [00000058] *pgd=3f66d831, *pte=00000000, *ppte=00000000 [ 51.140000] Internal error: Oops: 17 [#1] ARM [ 51.140000] Modules linked in: [ 51.140000] CPU: 0 PID: 1664 Comm: cat Not tainted 4.1.1+ #6 [ 51.140000] Hardware name: Atmel SAMA5 [ 51.140000] task: df6dd880 ti: dec60000 task.ti: dec60000 [ 51.140000] PC is at at91_pinconf_get+0xb4/0x200 [ 51.140000] LR is at at91_pinconf_get+0xb4/0x200 [ 51.140000] pc : [<c01e71a0>] lr : [<c01e71a0>] psr: 600f0013 sp : dec61e48 ip : 600f0013 fp : df522538 [ 51.140000] r10: df52250c r9 : 00000058 r8 : 00000068 [ 51.140000] r7 : 00000000 r6 : df53c910 r5 : 00000000 r4 : dec61e7c [ 51.140000] r3 : 00000000 r2 : c06746d4 r1 : 00000000 r0 : 00000003 [ 51.140000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 51.140000] Control: 10c53c7d Table: 3ee04059 DAC: 00000015 [ 51.140000] Process cat (pid: 1664, stack limit = 0xdec60208) [ 51.140000] Stack: (0xdec61e48 to 0xdec62000) [ 51.140000] 1e40: 00000358 00000000 df522500 ded15f80 c05a9d08 ded15f80 [ 51.140000] 1e60: 0000048c 00000061 df522500 ded15f80 c05a9d08 c01e7304 ded15f80 00000000 [ 51.140000] 1e80: c01e6008 00000060 0000048c c01e6034 c01e5f6c ded15f80 dec61ec0 00000000 [ 51.140000] 1ea0: 00020000 ded6f280 dec61f80 00000001 00000001 c00ae0b8 b6e80000 ded15fb0 [ 51.140000] 1ec0: 00000000 00000000 df4bc974 00000055 00000800 ded6f280 b6e80000 ded6f280 [ 51.140000] 1ee0: ded6f280 00020000 b6e80000 00000000 00020000 c0090dec c0671e1c dec61fb0 [ 51.140000] 1f00: b6f8b510 00000001 00004201 c000924c 00000000 00000003 00000003 00000000 [ 51.140000] 1f20: df4bc940 00022000 00000022 c066e188 b6e7f000 c00836f4 000b6e7f ded6f280 [ 51.140000] 1f40: ded6f280 b6e80000 dec61f80 ded6f280 00020000 c0091508 00000000 00000003 [ 51.140000] 1f60: 00022000 00000000 00000000 ded6f280 ded6f280 00020000 b6e80000 c0091d9c [ 51.140000] 1f80: 00000000 00000000 ffffffff 00020000 00020000 b6e80000 00000003 c000f124 [ 51.140000] 1fa0: dec60000 c000efa0 00020000 00020000 00000003 b6e80000 00020000 000271c4 [ 51.140000] 1fc0: 00020000 00020000 b6e80000 00000003 7fffe000 00000000 00000000 00020000 [ 51.140000] 1fe0: 00000000 bef50b64 00013835 b6f29c76 400f0030 00000003 00000000 00000000 [ 51.140000] [<c01e71a0>] (at91_pinconf_get) from [<c01e7304>] (at91_pinconf_dbg_show+0x18/0x2c0) [ 51.140000] [<c01e7304>] (at91_pinconf_dbg_show) from [<c01e6034>] (pinconf_pins_show+0xc8/0xf8) [ 51.140000] [<c01e6034>] (pinconf_pins_show) from [<c00ae0b8>] (seq_read+0x1a0/0x464) [ 51.140000] [<c00ae0b8>] (seq_read) from [<c0090dec>] (__vfs_read+0x20/0xd0) [ 51.140000] [<c0090dec>] (__vfs_read) from [<c0091508>] (vfs_read+0x7c/0x108) [ 51.140000] [<c0091508>] (vfs_read) from [<c0091d9c>] (SyS_read+0x40/0x94) [ 51.140000] [<c0091d9c>] (SyS_read) from [<c000efa0>] (ret_fast_syscall+0x0/0x3c) [ 51.140000] Code: eb010ec2 e30a0d08 e34c005a eb0ae5a7 (e5993000) [ 51.150000] ---[ end trace fb3c370da3ea4794 ]--- Fixes: a0b957f306fa ("pinctrl: at91: allow to have disabled gpio bank") Cc: stable@vger.kernel.org # 3.18 Signed-off-by: David Dueck <davidcdueck@googlemail.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26pinctrl: at91: Use generic irq_{request,release}_resources()Geert Uytterhoeven1-24/+0
The at91-specific irq_{request,release}_resources() callbacks are identical to the generic ones, modulo the bug fix in 5b76e79c77264899 ("gpiolib: irqchip: prevent driver unloading if gpio is used as irq only"). Until commit 8b67a1f0ad1f260f ("gpio: don't override irq_*_resources() callbacks"), the buggy at91-specific callbacks were never used, though. Hence drop the at91-specific ones in favor of the generic ones. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-1/+1
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17pinctrl/at91: Use irq_set_handler_locked()Thomas Gleixner1-5/+5
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
2015-06-10pinctrl: make pinctrl_register() return proper error codeMasahiro Yamada1-2/+2
Currently, pinctrl_register() just returns NULL on error, so the callers can not know the exact reason of the failure. Some of the pinctrl drivers return -EINVAL, some -ENODEV, and some -ENOMEM on error of pinctrl_register(), although the error code might be different from the real cause of the error. This commit reworks pinctrl_register() to return the appropriate error code and modifies all of the pinctrl drivers to use IS_ERR() for the error checking and PTR_ERR() for getting the error code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Ray Jui <rjui@broadcom.com> Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-06pinctrl: at91: Add set_multiple GPIO chip featureAlexander Stein1-0/+16
This adds the callback for set_multiple. As this controller has a separate set and clear register, we can't write directly to PIO_ODSR as this would required a cached variable and would race with at91_gpio_set. So build masks for the PIO_SODR and PIO_CODR registers and write them together. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-04-14Merge tag 'pinctrl-v4.1-1' of ↵Linus Torvalds1-32/+28
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol updates from Linus Walleij: "This is the bulk of pin control changes for the v4.1 development cycle. Nothing really exciting this time: we basically added a few new drivers and subdrivers and stabilized them in linux-next. Some cleanups too. With sunrisepoint Intel has a real fine fully featured pin control driver for contemporary hardware, and the AMD driver is also for large deployments. Most of the others are ARM devices. New drivers: - Intel Sunrisepoint - AMD KERNCZ GPIO - Broadcom Cygnus IOMUX New subdrivers: - Marvell MVEBU Armada 39x SoCs - Samsung Exynos 5433 - nVidia Tegra 210 - Mediatek MT8135 - Mediatek MT8173 - AMLogic Meson8b - Qualcomm PM8916 On top of this cleanups and development history for the above drivers as issues were fixed after merging" * tag 'pinctrl-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (71 commits) pinctrl: sirf: move sgpio lock into state container pinctrl: Add support for PM8916 GPIO's and MPP's pinctrl: bcm2835: Fix support for threaded level triggered IRQs sh-pfc: r8a7790: add EtherAVB pin groups pinctrl: Document "function" + "pins" pinmux binding pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support pinctrl: fsl: imx: Check for 0 config register pinctrl: Add support for Meson8b documentation: Extend pinctrl docs for Meson8b pinctrl: Cleanup Meson8 driver Fix inconsistent spinlock of AMD GPIO driver which can be recognized by static analysis tool smatch. Declare constant Variables with Sparse's suggestion. pinctrl: at91: convert __raw to endian agnostic IO pinctrl: constify of_device_id array pinctrl: pinconf-generic: add dt node names to error messages pinctrl: pinconf-generic: scan also referenced phandle node pinctrl: mvebu: add suspend/resume support to Armada XP pinctrl driver pinctrl: st: Display pin's function when printing pinctrl debug information pinctrl: st: Show correct pin direction also in GPIO mode pinctrl: st: Supply a GPIO get_direction() call-back pinctrl: st: Move st_get_pio_control() further up the source file ...
2015-04-07pinctrl: at91: convert __raw to endian agnostic IOBen Dooks1-25/+25
Use endian agnostic _relaxed IO accessors instead of the __raw ones. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-27pinctrl: constify of_device_id arrayFabian Frederick1-2/+2
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Hongzhou Yang <hongzhou.yang@mediatek.com> Acked-by: Lee Jones <lee@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-18pinctrl: at91: move lock/unlock_as_irq calls into request/releaseBoris Brezillon1-10/+7
The gpiochip_lock_as_irq call can fail and return an error, while the irq_startup is not expected to fail (returns an unsigned int which is not checked by irq core code). irq_request/release_resources functions have been created to address this problem. Move gpiochip_lock/unlock_as_irq calls into irq_request/release_resources functions to prevent using a gpio as an irq if the gpiochip_lock_as_irq call failed. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-09pinctrl: at91: simplify probe error handlingBaruch Siach1-5/+1
There is no code ender the 'err' label. Just return the error code directly. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-01-26pinctrl: at91: allow to have disabled gpio bankJean-Christophe PLAGNIOL-VILLARD1-53/+55
Today we expect that all the bank are enabled, and count the number of banks used by the pinctrl based on it instead of using the last bank id enabled. So switch to it, set the chained IRQ at runtime based on enabled banks and wait only the number of enabled gpio controllers at probe time. Cc: <stable@vger.kernel.org> # 3.18 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-14Merge tag 'gpio-v3.19-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull take two of the GPIO updates: "Same stuff as last time, now with a fixup patch for the previous compile error plus I ran a few extra rounds of compile-testing. This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace - New driver and device tree bindings for 74xx ICs - New driver and device tree bindings for the VF610 Vybrid - Support the RCAR r8a7793 and r8a7794 - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties - Suspend/resume support for the MVEBU driver - A slew of minor fixes and improvements" * tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits) gpio: mcp23s08: fix up compilation error gpio: pl061: document gpio-ranges property for bindings file gpio: pl061: hook request if gpio-ranges avaiable gpio: mcp23s08: Add option to configure IRQ output polarity as active high gpio: fix deferred probe detection for legacy API serial: mctrl_gpio: use gpiod_set_array function mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function gpio: remove const modifier from gpiod_get_direction() gpio: remove gpio_descs global array gpio: mxs: implement get_direction callback gpio: em: Use dynamic allocation of GPIOs gpio: Check if base is positive before calling gpio_is_valid() gpio: mcp23s08: Add simple IRQ support for SPI devices gpio: mcp23s08: request a shared interrupt gpio: mcp23s08: Do not free unrequested interrupt gpio: rcar: Add r8a7793 and r8a7794 support gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function gpiolib: allow simultaneous setting of multiple GPIO outputs gpio: mvebu: add suspend/resume support gpio: gpio-davinci: remove duplicate check on resource ..
2014-12-03pinctrl: at91: enhance (debugfs) at91_gpio_dbg_showMatthieu Crapet1-6/+7
When a pin is configured as GPIO, print also direction (input or output). Signed-off-by: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-29pinctrl: at91: use own headerAlexandre Belloni1-3/+1
Copy the mach/at91_pio.h header locally and use it for pinctrl-at91.c. This allows to remove the dependency on mach/at91_pio.h to be able to move at91 to multiplatform. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-28gpio: rename gpio_lock_as_irq to gpiochip_lock_as_irqAlexandre Courbot1-2/+2
This function actually operates on a gpio_chip, so its prefix should reflect that fact for consistency with other functions defined in gpio/driver.h. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-10-20pinctrl: drop owner assignment from platform_driversWolfram Sang1-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-07Merge tag 'pinctrl-v3.18-1' of ↵Linus Torvalds1-18/+194
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "This is the bulk of pin control changes for the v3.18 development series: - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin controllers. - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x, APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik. - Push Freescale drivers down into their own subdirectory. - Assorted sprays of syntax and semantic fixes" * tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits) pinctrl: specify bindings for pins and groups pinctrl: nomadik: improve GPIO debug prints pinctrl: abx500: refactor DT parser to take two paths pinctrl: abx500: use helpers for map allocation/free pinctrl: alter device tree bindings for functions pinctrl: nomadik: refactor DT parser to take two paths pinctrl: nomadik: use utils map free function pinctrl: nomadik: use util function to reserve maps pinctrl: qcom: use restart_notifier mechanism for ps_hold pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation pinctrl: berlin: fix the dt_free_map function pinctrl: at91: disable PD or PU before enabling PU or PD pinctrl: st: remove gpiochip in failure cases pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add pinctrl: at91: Fix failure path in at91_gpio_probe path pinctrl: lantiq: Release gpiochip resources in fail case pinctrl: imx: detect uninitialized pins pinctrl: tegra: Add MIPI pad control pinctrl: at91: Switch to using managed clk_get pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges ...
2014-09-23pinctrl: at91: disable PD or PU before enabling PU or PDWenyou Yang1-0/+6
Disable Pull-Down or Pull-Up property before enabling Pull-Up or Pull-Down, because the pin's Pull-Up and Pull-Down property is mutually exclusive. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: at91: Fix error handling while doing gpiochio_irqchip_addPramod Gurav1-4/+10
This patch removes a call to panic function when gpiochio_irqchip_add fails and just returns the error to the calling function. Same return value is used to handle the error case and adds a lable to release resources on error. The error message has been improved to indicate failure to add irqchip to gpiochip. This also changes first argument to function at91_gpio_of_irq_setup from struct device_node to struct platform_device. Because The device_node argument was anyway not being used. Passed pdev so that on failure dev_err can use &pdev->dev and log can be associated with proper device. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-23pinctrl: at91: Fix failure path in at91_gpio_probe pathPramod Gurav1-7/+13
This fixes the whole error handling in probe function by capturing and returning error values on kernel function like clk_prepare, clk_enable, gpiochip_add etc. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: at91: Switch to using managed clk_getPramod Gurav1-4/+2
This patch switches to using managed version of clk_get and hence removes clk_put from failure path. CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> CC: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-05pinctrl: at91: add drive strength configurationMarek Roszko1-1/+161
The SAMA5 and SAM9x5 series both have drive strength options for the PIOs. This patch adds the ability to set one of three hardware options for drive strengths of low, medium or high for the each pin. The actual current output of the chip based on the setting is defined in the datasheets and varies per pins separate from banks and with supply voltage. This patch adds three new dt-bindings that allow setting the strength when configuring pins. By default, no change will be made to the drive strength of a pin from its reset value. Due to the difference between the register addresses of the SAMA5 and SAM9x5 series, a new sama5d3-pinctrl id was added. Signed-off-by: Marek Roszko <mark.roszko@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-04pinctrl: clean up after enable refactoringLinus Walleij1-3/+3
commit 2243a87d90b42eb38bc281957df3e57c712b5e56 "pinctrl: avoid duplicated calling enable_pinmux_setting for a pin" removed the .disable callback from the struct pinmux_ops, making the .enable() callback the only remaining callback. However .enable() is a bad name as it seems to imply that a muxing can also be disabled. Rename the callback to .set_mux() and also take this opportunity to clean out any remaining mentions of .disable() from the documentation. Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Fan Wu <fwu@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-08-17pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0xHans Wennborg1-2/+2
The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by: Hans Wennborg <hans@hanshq.net> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11pinctrl: pinctrl-at91.c: Cleaning up values that are never usedRickard Strandqvist1-2/+2
Remove variable that are never used This was found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11pinctrl: pinctrl-at91.c: Cleaning up if unsigned is less than zeroRickard Strandqvist1-1/+1
Remove checking if a unsigned is less than zero This was found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11pinctrl: avoid duplicated calling enable_pinmux_setting for a pinFan Wu1-21/+0
What the patch does: 1. Call pinmux_disable_setting ahead of pinmux_enable_setting each time pinctrl_select_state is called 2. Remove the HW disable operation in pinmux_disable_setting function. 3. Remove the disable ops in struct pinmux_ops 4. Remove all the disable ops users in current code base. Notes: 1. Great thanks for the suggestion from Linus, Tony Lindgren and Stephen Warren and Everyone that shared comments on this patch. 2. The patch also includes comment fixes from Stephen Warren. The reason why we do this: 1. To avoid duplicated calling of the enable_setting operation without disabling operation inbetween which will let the pin descriptor desc->mux_usecount increase monotonously. 2. The HW pin disable operation is not useful for any of the existing platforms. And this can be used to avoid the HW glitch after using the item #1 modification. In the following case, the issue can be reproduced: 1. There is a driver that need to switch pin state dynamically, e.g. between "sleep" and "default" state 2. The pin setting configuration in a DTS node may be like this: component a { pinctrl-names = "default", "sleep"; pinctrl-0 = <&a_grp_setting &c_grp_setting>; pinctrl-1 = <&b_grp_setting &c_grp_setting>; } The "c_grp_setting" config node is totally identical, maybe like following one: c_grp_setting: c_grp_setting { pinctrl-single,pins = <GPIO48 AF6>; } 3. When switching the pin state in the following official pinctrl sequence: pin = pinctrl_get(); state = pinctrl_lookup_state(wanted_state); pinctrl_select_state(state); pinctrl_put(); Test Result: 1. The switch is completed as expected, that is: the device's pin configuration is changed according to the description in the "wanted_state" group setting 2. The "desc->mux_usecount" of the corresponding pins in "c_group" is increased without being decreased, because the "desc" is for each physical pin while the setting is for each setting node in the DTS. Thus, if the "c_grp_setting" in pinctrl-0 is not disabled ahead of enabling "c_grp_setting" in pinctrl-1, the desc->mux_usecount will keep increasing without any chance to be decreased. According to the comments in the original code, only the setting, in old state but not in new state, will be "disabled" (calling pinmux_disable_setting), which is correct logic but not intact. We still need consider case that the setting is in both old state and new state. We can do this in the following two ways: 1. Avoid to "enable"(calling pinmux_enable_setting) the "same pin setting" repeatedly 2. "Disable"(calling pinmux_disable_setting) the "same pin setting", actually two setting instances, ahead of enabling them. Analysis: 1. The solution #2 is better because it can avoid too much iteration. 2. If we disable all of the settings in the old state and one of the setting(s) exist in the new state, the pins mux function change may happen when some SoC vendors defined the "pinctrl-single,function-off" in their DTS file. old_setting => disabled_setting => new_setting. 3. In the pinmux framework, when a pin state is switched, the setting in the old state should be marked as "disabled". Conclusion: 1. To Remove the HW disabling operation to above the glitch mentioned above. 2. Handle the issue mentioned above by disabling all of the settings in old state and then enable the all of the settings in new state. Signed-off-by: Fan Wu <fwu@marvell.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-27pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occursAlexander Stein1-0/+13
With commit 80cc3732 (pinctrl/at91: convert driver to use gpiolib irqchip) gpiochip_set_chained_irqchip is called for PIOC, PIOD and PIOE. The associated GPIO chip for the IRQ chip is overwritten each time, because they share the same hard IRQ line. Thus if an IRQ occurs on PIOC or PIOD, gpio_irq_handler will only check on PIOE (the assigned GPIO chip) where no event occured. Thus the IRQ will not be cleared, retriggering the ISR. Fix that (like done before) by only set the PIOC GPIO chip to the IRQ chip and walk the list in the irq handler. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl/at91: Fix mask creation in at91_gpio_dbg_showAlexander Stein1-2/+1
pin_to_mask expects a bank pin number. So do not add the chip base. Without that patch cat /sys/kernel/debug/gpio looks like that: GPIOs 0-31, platform/fffff200.gpio, fffff200.gpio: [spi32766.0] GPIOfffff200.gpio5: [gpio] set [ads7846_pendown] GPIOfffff200.gpio15: [gpio] set [ohci_vbus] GPIOfffff200.gpio21: [gpio] set [ohci_vbus] GPIOfffff200.gpio24: [gpio] set [button1] GPIOfffff200.gpio28: [gpio] clear [button2] GPIOfffff200.gpio29: [gpio] clear GPIOs 32-63, platform/fffff400.gpio, fffff400.gpio: [sda] GPIOfffff400.gpio4: [periph A] [scl] GPIOfffff400.gpio5: [periph A] [spi32766.3] GPIOfffff400.gpio11: [periph A] [error] GPIOfffff400.gpio22: [periph A] [run] GPIOfffff400.gpio23: [periph A] GPIOs 64-95, platform/fffff600.gpio, fffff600.gpio: [reset_pin] GPIOfffff600.gpio29: [periph A] GPIOs 96-127, platform/fffff800.gpio, fffff800.gpio: [led1] GPIOfffff800.gpio5: [periph A] [led2] GPIOfffff800.gpio6: [periph A] [led3] GPIOfffff800.gpio7: [periph A] [led4] GPIOfffff800.gpio8: [periph A] GPIOs 128-159, platform/fffffa00.gpio, fffffa00.gpio: [button3] GPIOfffffa00.gpio10: [periph A] [button4] GPIOfffffa00.gpio12: [periph A] Note that every bank despite bank 0 only shows "periph A" which are obviously used as GPIOs. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22pinctrl/at91: convert driver to use gpiolib irqchipAlexander Stein1-105/+30
This converts the AT91 pin control driver to register its chained irq handler and irqchip using the helpers in the gpiolib core. Signed-off-by: Alexander Stein <alexanders83@web.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25pinctrl: at91: implement get_directionRichard Genoud1-0/+12
This is needed for gpiod_get_direction(). Otherwise, it returns -EINVAL. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>