summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/mvebu
AgeCommit message (Collapse)AuthorFilesLines
2020-03-26Revert "pinctrl: mvebu: armada-37xx: use use platform api"Linus Walleij1-9/+3
This reverts commit 06e26b75f5e613b400116fdb7ff6206a681ab271. According to discussions, it causes a regression. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-02-21pinctrl: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-1/+4
Use newly added GPIO defines GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT instead of using hard-coded 1 and 0. Main benefit is to make it easier to see which values mean IN and which OUT. As a side effect this helps GPIO framework to change the direction defines to something else if ever needed. Please note that return value from get_direction call on pinctrl-axp209 driver was changed. Previously pinctrl-axp209 might have returned value 2 for direction INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Link: https://lore.kernel.org/r/20200214135712.GA14557@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-23pinctrl: mvebu: armada-37xx: use use platform apiPeng Fan1-3/+9
platform_irq_count() and platform_get_irq() is the more generic way (independent of device trees) to determine the count of available interrupts. So use this instead. As platform_irq_count() might return an error code (which of_irq_count doesn't) some additional handling is necessary. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1576672860-14420-1-git-send-email-peng.fan@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: armada-37xx: Remove unneeded semicolonMa Feng1-2/+2
Fixes coccicheck warning: drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:736:2-3: Unneeded semicolon drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:803:2-3: Unneeded semicolon Fixes: commit 5715092a458c ("pinctrl: armada-37xx: Add gpio support") commit 2f227605394b ("pinctrl: armada-37xx: Add irqchip support") Signed-off-by: Ma Feng <mafeng.ma@huawei.com> Link: https://lore.kernel.org/r/1576723865-111331-1-git-send-email-mafeng.ma@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: Fix Kconfig indentationKrzysztof Kozlowski1-5/+5
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306382-32516-1-git-send-email-krzk@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type()Gregory CLEMENT1-3/+3
As explained in the following commit a9a1a4833613 ("pinctrl: armada-37xx: Fix gpio interrupt setup") the armada_37xx_irq_set_type() function can be called before the initialization of the mask field. That means that we can't use this field in this function and need to workaround it using hwirq. Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: stable@vger.kernel.org Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191115155752.2562-1-gregory.clement@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-13Merge tag 'v5.4-rc5' into develLinus Walleij1-13/+13
Linux 5.4-rc5
2019-10-24pinctrl: mvebu: use devm_platform_ioremap_resource() to simplify codeYueHaibing2-8/+3
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191016141217.21520-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-16pinctrl: armada-37xx: Pass irqchip when adding gpiochipLinus Walleij1-15/+19
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Marek Behún <marek.behun@nic.cz> Cc: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191002121550.16104-1-linus.walleij@linaro.org
2019-10-09pinctrl: armada-37xx: swap polarity on LED groupPatrick Williams1-4/+4
The configuration registers for the LED group have inverted polarity, which puts the GPIO into open-drain state when used in GPIO mode. Switch to '0' for GPIO and '1' for LED modes. Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Patrick Williams <alpawi@amazon.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191001155154.99710-1-alpawi@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-04pinctrl: armada-37xx: fix control of pins 32 and upPatrick Williams1-9/+9
The 37xx configuration registers are only 32 bits long, so pins 32-35 spill over into the next register. The calculation for the register address was done, but the bitmask was not, so any configuration to pin 32 or above resulted in a bitmask that overflowed and performed no action. Fix the register / offset calculation to also adjust the offset. Fixes: 5715092a458c ("pinctrl: armada-37xx: Add gpio support") Signed-off-by: Patrick Williams <alpawi@amazon.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191001154634.96165-1-alpawi@amazon.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-27pinctrl: mvebu: add additional variant for standalone CP115Grzegorz Jaszczyk1-4/+13
With CP115 standalone modules, all MPP configuration are possible. Handle this new possibility thanks to the new "marvell,cp115-standalone-pinctrl" compatible property. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [<miquel.raynal@bootlin.com>: mention the new compatible in the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-27pinctrl: mvebu: Add CP110 missing pin functionalityKonstantin Porotchkin1-1/+2
Add missing definition for function 0xe on CP-110 MPP-62. The pin function is Data Strobe for SDIO interface. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20190805101607.29811-2-miquel.raynal@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-13Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds1-279/+297
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
2019-06-25pinctrl: mvebu: Add support for MV98DX1135Chris Packham1-279/+297
The 98DX1135 is a switch chip with an integrated CPU. This is similar to the 98DX4122 except the MPP assignments differ. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner12-60/+12
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-21pinctrl: armada-37xx: change suspend/resume timeMiquel Raynal1-2/+2
Armada 3700 PCIe IP relies on the pinctrl IP managed by this driver. For reasons related to the PCI core's organization when suspending/resuming, PCI host controller drivers must reconfigure their register at suspend_noirq()/resume_noirq() which happens after suspend()/suspend_late() and before resume_early()/resume(). In the current state, after resuming from a suspend to RAM cycle the PCIe IP is reconfigured before the pinctrl one which produces an interrupt storm. The solution to support PCIe resume operation is to change the "priority" of this pinctrl driver PM callbacks to "_noirq()". Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-11pinctrl: armada-37xx: add missing pin: PCIe1 WakeupGregory CLEMENT1-0/+1
Declare the PCIe1 Wakeup which was initially missing. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-11pinctrl: armada-37xx: Correct mpp definitionsMarek Behún1-4/+6
This is a cleanup and fix of the patch by Ken Ma <make@marvell.com>. Fix the mpp definitions according to newest revision of the specification: - northbridge: fix pmic1 gpio number to 7 fix pmic0 gpio number to 6 - southbridge split pcie1 group bit mask to BIT(5) and BIT(9) fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13) add smi group with bit mask BIT(4) [gregory: split the pcie group in 2, as at hardware level they can be configured separately] Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-14pinctrl: Include <linux/gpio/driver.h> nothing elseLinus Walleij1-1/+1
These drivers are GPIO drivers, and the do not need to use the legacy header in <linux/gpio.h>, go directly for <linux/gpio/driver.h> instead. Replace any use of GPIOF_* with 0/1, these flags are for consumers, not drivers. Get rid of a few gpio_to_irq() users that was littering around the place, use local callbacks or avoid using it at all. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-29pinctrl: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Tony Lindgren <tony@atomide.com> Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Barry Song <baohua@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: linux-gpio@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-omap@vger.kernel.org Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-29pinctrl: armada-37xx: add suspend/resume supportMiquel Raynal1-0/+118
Add suspend/resume hooks in pinctrl driver to handle S2RAM operations. Beyond the traditional register save/restore operations, these hooks also keep the GPIOs used for both-edge IRQ synchronized between their level (low/high) and expected IRQ polarity (falling/rising edge). Since pinctrl is an infrastructure module, its resume should be issued prior to other IO drivers. The pinctrl PM operations are requested at early/late stages for this reason. Suggested-by: Ken Ma <make@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook2-14/+23
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kmalloc() -> devm_kmalloc_array()Kees Cook1-2/+2
The devm_kmalloc() function has a 2-factor argument form, devm_kmalloc_array(). This patch replaces cases of: devm_kmalloc(handle, a * b, gfp) with: devm_kmalloc_array(handle, a * b, gfp) as well as handling cases of: devm_kmalloc(handle, a * b * c, gfp) with: devm_kmalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kmalloc_array(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kmalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kmalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kmalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kmalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kmalloc + devm_kmalloc_array (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kmalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, C1 * C2, ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24pinctrl: armada-37xx: Fix spurious irq managementTerry Zhou1-1/+2
Until now, if we found spurious irq in irq_handler, we only updated the status in register but not the status in the code. Due to this the system will got stuck dues to the infinite loop [gregory.clement@bootlin.com: update comment and add fix and stable tags] Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: <stable@vger.kernel.org> Signed-off-by: Terry Zhou <bjzhou@marvell.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23pinctrl: mvebu: update use "nand" function for "rb" pinChris Packham1-1/+1
The Armada 98dx3236 SoCs don't have a different MPP sel value for nand specific pins so "dev" was technically correct. But all the other Armada SoCs use "nand" in their dts and the pin is specific to the nand interface so use "nand" for the function name. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pinctrl: mvebu: use correct MPP sel value for dev pinsChris Packham1-10/+10
The "dev" function is selected with the value 0x4 not 0x01. Fixes: commit d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pinctrl: armada-37xx: Convert to use match_string() helperAndy Shevchenko1-21/+8
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds2-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-08pinctrl: armada-37xx: account for const type of of_device_id.dataJulia Lawall1-2/+2
The data field of an of_device_id structure has type const void *, so there is no need for a const-discarding cast when putting const values into such a structure. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: mvebu: Delete an error message for a failed memory allocation in ↵Markus Elfring1-3/+2
mvebu_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29pinctrl: armada-37xx: Fix direction_output() callback behaviorGregory CLEMENT1-2/+11
The direction_output callback of the gpio_chip structure is supposed to set the output direction but also to set the value of the gpio. For the armada-37xx driver this callback acted as the gpio_set_direction callback for the pinctrl. This patch fixes the behavior of the direction_output callback by also applying the value received as parameter. Cc: stable@vger.kernel.org Fixes: 5715092a458c ("pinctrl: armada-37xx: Add gpio support") Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds1-0/+64
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds1-4/+2
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij1-4/+2
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-03pinctrl: armada-37xx: remove unused variableArnd Bergmann1-2/+0
A cleanup left behind a temporary variable that is now unused: drivers/pinctrl/mvebu/pinctrl-armada-37xx.c: In function 'armada_37xx_irq_startup': drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:693:20: error: unused variable 'chip' [-Werror=unused-variable] This removes the declarations as well. Fixes: 3ee9e605caea ("pinctrl: armada-37xx: Stop using struct gpio_chip.irq_base") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31pinctrl: armada-37xx: Add edge both type gpio irq supportKen Ma1-0/+64
Current edge both type gpio irqs which need to swap polarity in each interrupt are not supported, this patch adds edge both type gpio irq support. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19pinctrl: armada-37xx: Stop using struct gpio_chip.irq_baseThierry Reding1-2/+2
The Armada 37xx driver always initializes the IRQ base to 0, hence the subtraction is a no-op. Remove the subtraction and thereby the last user of struct gpio_chip's .irq_base field. Note that this was also actually a bug and only worked because of the above assumption. If the IRQ base had been dynamically allocated, the subtraction would've caused the wrong mask to be generated since the struct irq_data.hwirq field is an index local to the IRQ domain. As a result, it should now be safe to also allocate this chip's IRQ base dynamically, unless there are consumers left that refer to the IRQs by their global number. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12pinctrl: armada-37xx: Fix gpio interrupt setupGregory CLEMENT1-19/+22
Since commit dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs dynamically"), the irqs for gpio are not statically allocated during in gpiochip_irqchip_add. This driver was based on this assumption for initializing the mask associated to each interrupt this led to a NULL pointer crash in the kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000068 CM = 0, WnR = 1 [0000000000000000] user address but active_mm is swapper Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-06657-g3b9f8ed25dbe #576 Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT) task: ffff80001d908000 task.stack: ffff000008068000 PC is at armada_37xx_pinctrl_probe+0x5f8/0x670 LR is at armada_37xx_pinctrl_probe+0x5e8/0x670 pc : [<ffff000008e25cdc>] lr : [<ffff000008e25ccc>] pstate: 60000045 sp : ffff00000806bb80 x29: ffff00000806bb80 x28: 0000000000000024 x27: 000000000000000c x26: 0000000000000001 x25: ffff80001efee760 x24: 0000000000000000 x23: ffff80001db6f570 x22: ffff80001db6f438 x21: 0000000000000000 x20: ffff80001d9f4810 x19: ffff80001db6f418 x18: 0000000000000000 x17: 0000000000000001 x16: 0000000000000019 x15: ffffffffffffffff x14: 0140000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : ffff000009923580 x8 : ffff80001d400248 x7 : ffff80001d400270 x6 : 0000000000000000 x5 : ffff80001d400248 x4 : ffff80001d400270 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffff000008068000) Call trace: Exception stack(0xffff00000806ba40 to 0xffff00000806bb80) ba40: 0000000000000000 0000000000000001 0000000000000001 0000000000000000 ba60: ffff80001d400270 ffff80001d400248 0000000000000000 ffff80001d400270 ba80: ffff80001d400248 ffff000009923580 0000000000000040 0101010101010101 baa0: 0000000000000030 0000000000000000 0140000000000000 ffffffffffffffff bac0: 0000000000000019 0000000000000001 0000000000000000 ffff80001db6f418 bae0: ffff80001d9f4810 0000000000000000 ffff80001db6f438 ffff80001db6f570 bb00: 0000000000000000 ffff80001efee760 0000000000000001 000000000000000c bb20: 0000000000000024 ffff00000806bb80 ffff000008e25ccc ffff00000806bb80 bb40: ffff000008e25cdc 0000000060000045 ffff00000806bb60 ffff0000081189b8 bb60: ffffffffffffffff ffff00000811cf1c ffff00000806bb80 ffff000008e25cdc [<ffff000008e25cdc>] armada_37xx_pinctrl_probe+0x5f8/0x670 [<ffff00000859d8c8>] platform_drv_probe+0x58/0xb8 [<ffff00000859bb44>] driver_probe_device+0x22c/0x2d8 [<ffff00000859bcac>] __driver_attach+0xbc/0xc0 [<ffff000008599c84>] bus_for_each_dev+0x4c/0x98 [<ffff00000859b440>] driver_attach+0x20/0x28 [<ffff00000859af90>] bus_add_driver+0x1b8/0x228 [<ffff00000859c648>] driver_register+0x60/0xf8 [<ffff00000859df64>] __platform_driver_probe+0x74/0x130 [<ffff000008e256dc>] armada_37xx_pinctrl_driver_init+0x20/0x28 [<ffff000008083980>] do_one_initcall+0x38/0x128 [<ffff000008e00cf4>] kernel_init_freeable+0x188/0x22c [<ffff0000089b56e8>] kernel_init+0x10/0x100 [<ffff000008084bb0>] ret_from_fork+0x10/0x18 Code: f9403fa2 12001341 1100075a 9ac12041 (b9000001) ---[ end trace 8b0f4e05e1603208 ]--- This patch moves the initialization of the mask field in the irq_startup function. However some callbacks such as irq_set_type and irq_set_wake could be called before irq_startup. For those functions the mask is computed at each call which is not a issue as these functions are not located in a hot path but are used sporadically for configuration. Fixes: dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs dynamically") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: armada-37xx: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-1/+1
structures This pinconf_ops structure is only stored in the const pinconf_ops field of a pinctrl_desc structure. Make the pinconf_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: armada-37xx: add static to local dataMasahiro Yamada1-2/+2
Detected by sparse. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-07pinctrl: armada-37xx: Fix number of pin in south bridgeGregory CLEMENT1-1/+1
On the south bridge we have pin from to 29, so it gives 30 pins (and not 29). Without this patch the kernel complain with the following traces: cat /sys/kernel/debug/pinctrl/d0018800.pinctrl/pingroups [ 154.530205] armada-37xx-pinctrl d0018800.pinctrl: failed to get pin(29) name [ 154.537567] ------------[ cut here ]------------ [ 154.542348] WARNING: CPU: 1 PID: 1347 at /home/gclement/open/kernel/marvell-mainline-linux/drivers/pinctrl/core.c:1610 pinctrl_groups_show+0x15c/0x1a0 [ 154.555918] Modules linked in: [ 154.558890] CPU: 1 PID: 1347 Comm: cat Tainted: G W 4.13.0-rc1-00001-g19e1b9fa219d #525 [ 154.568316] Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT) [ 154.576311] task: ffff80001d32d100 task.stack: ffff80001bdc0000 [ 154.583048] PC is at pinctrl_groups_show+0x15c/0x1a0 [ 154.587816] LR is at pinctrl_groups_show+0x148/0x1a0 [ 154.592847] pc : [<ffff0000083e3adc>] lr : [<ffff0000083e3ac8>] pstate: 00000145 [ 154.600840] sp : ffff80001bdc3c80 [ 154.604255] x29: ffff80001bdc3c80 x28: 00000000f7750000 [ 154.609825] x27: ffff80001d05d198 x26: 0000000000000009 [ 154.615224] x25: ffff0000089ead20 x24: 0000000000000002 [ 154.620705] x23: ffff000008c8e1d0 x22: ffff80001be55700 [ 154.626187] x21: ffff80001d05d100 x20: 0000000000000005 [ 154.631667] x19: 0000000000000006 x18: 0000000000000010 [ 154.637238] x17: 0000000000000000 x16: ffff0000081fc4b8 [ 154.642726] x15: 0000000000000006 x14: ffff0000899e537f [ 154.648214] x13: ffff0000099e538d x12: 206f742064656c69 [ 154.653613] x11: 6166203a6c727463 x10: 0000000005f5e0ff [ 154.659094] x9 : ffff80001bdc38c0 x8 : 286e697020746567 [ 154.664576] x7 : ffff000008551870 x6 : 000000000000011b [ 154.670146] x5 : 0000000000000000 x4 : 0000000000000000 [ 154.675544] x3 : 0000000000000000 x2 : 0000000000000000 [ 154.681025] x1 : ffff000008c8e1d0 x0 : ffff80001be55700 [ 154.686507] Call trace: [ 154.688668] Exception stack(0xffff80001bdc3ab0 to 0xffff80001bdc3be0) [ 154.695224] 3aa0: 0000000000000006 0001000000000000 [ 154.703310] 3ac0: ffff80001bdc3c80 ffff0000083e3adc ffff80001bdc3bb0 00000000ffffffd8 [ 154.711304] 3ae0: 4554535953425553 6f6674616c703d4d 4349564544006d72 6674616c702b3d45 [ 154.719478] 3b00: 313030643a6d726f 6e69702e30303838 ffff80006c727463 ffff0000089635d8 [ 154.727562] 3b20: ffff80001d1ca0cb ffff000008af0fa4 ffff80001bdc3b40 ffff000008c8e1dc [ 154.735648] 3b40: ffff80001bdc3bc0 ffff000008223174 ffff80001be55700 ffff000008c8e1d0 [ 154.743731] 3b60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 154.752354] 3b80: 000000000000011b ffff000008551870 286e697020746567 ffff80001bdc38c0 [ 154.760446] 3ba0: 0000000005f5e0ff 6166203a6c727463 206f742064656c69 ffff0000099e538d [ 154.767910] 3bc0: ffff0000899e537f 0000000000000006 ffff0000081fc4b8 0000000000000000 [ 154.776085] [<ffff0000083e3adc>] pinctrl_groups_show+0x15c/0x1a0 [ 154.782823] [<ffff000008222abc>] seq_read+0x184/0x460 [ 154.787505] [<ffff000008344120>] full_proxy_read+0x60/0xa8 [ 154.793431] [<ffff0000081f9bec>] __vfs_read+0x1c/0x110 [ 154.799001] [<ffff0000081faff4>] vfs_read+0x84/0x140 [ 154.803860] [<ffff0000081fc4fc>] SyS_read+0x44/0xa0 [ 154.808983] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 154.814459] ---[ end trace 4cbb00a92d616b95 ]--- Cc: stable@vger.kernel.org Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-07pinctrl: armada-37xx: Fix the pin 23 on south bridgeGregory CLEMENT1-6/+17
Pin 23 on South bridge does not belong to the rgmii group. It belongs to a separate group which can have 3 functions. Due to this the fix also have to update the way the functions are managed. Until now each groups used NB_FUNCS(which was 2) functions. For the mpp23, 3 functions are available but it is the only group which needs it, so on the loop involving NB_FUNCS an extra test was added to handle only the functions added. The bug was visible with the merge of the commit 07d065abf93d "arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot", the gpio regulator used the gpio 23, due to this the whole rgmii group was setup to gpio which broke the Ethernet support on the Armada 3720 DB board. Thanks to this patch, the UHS SD cards (which need the vqmmc) _and_ the Ethernet work again. Cc: stable@vger.kernel.org Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: armada-37xx: Fix number of pin in sdio_sbGregory CLEMENT1-2/+2
The sdio_sb group is composed of 6 pins and not 5. Reported-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: armada-37xx: Fix uart2 group selection register maskKen Ma1-2/+3
If north bridge selection register bit1 is clear, pins [10:8] are for SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn and CTSn, so bit1 should be added to uart2 group and it must be set for both "gpio" and "uart" functions of uart2 group. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: add driver for Armada CP110 pinctrlHanna Hawa3-0/+692
This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: add driver for Armada AP806 pinctrlHanna Hawa3-0/+145
This commit adds a pinctrl driver for the pin-muxing controller found in the AP806 part of the Marvell Armada 7K and 8K SoCs. Its register interface is compatible with the one used by previous mvebu pin controllers, so the common logic in drivers/pinctrl/mvebu/pinctrl-mvebu.c is used. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl changes - converted to simple_mmio - removed unimplemented .remove function - removed DTS description - converted to use syscon/regmap --rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 02:24:44 +0000